[uboot] create uboot from github:

repo: https://github.com/u-boot/u-boot
	commit: d80bb749fab53da72c4a0e09b8c2d2aaa3103c91

Change-Id: Ie6434426e1ec15bc08bb1832798e371f3fd5fb29

u-boot-2021.10/common/splash_source.c

@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ */
+
+#include <common.h>
+#include <bmp_layout.h>
+#include <command.h>
+#include <env.h>
+#include <errno.h>
+#include <fs.h>
+#include <fdt_support.h>
+#include <image.h>
+#include <log.h>
+#include <nand.h>
+#include <sata.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <splash.h>
+#include <usb.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPI_FLASH
+static struct spi_flash *sf;
+static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
+{
+	if (!sf) {
+		sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
+				     CONFIG_SF_DEFAULT_CS,
+				     CONFIG_SF_DEFAULT_SPEED,
+				     CONFIG_SF_DEFAULT_MODE);
+		if (!sf)
+			return -ENODEV;
+	}
+
+	return spi_flash_read(sf, offset, read_size, (void *)(uintptr_t)bmp_load_addr);
+}
+#else
+static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
+{
+	debug("%s: sf support not available\n", __func__);
+	return -ENOSYS;
+}
+#endif
+
+#ifdef CONFIG_CMD_NAND
+static int splash_nand_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
+{
+	struct mtd_info *mtd = get_nand_dev_by_index(nand_curr_device);
+	return nand_read_skip_bad(mtd, offset,
+				  &read_size, NULL,
+				  mtd->size,
+				  (u_char *)bmp_load_addr);
+}
+#else
+static int splash_nand_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
+{
+	debug("%s: nand support not available\n", __func__);
+	return -ENOSYS;
+}
+#endif
+
+static int splash_storage_read_raw(struct splash_location *location,
+			       u32 bmp_load_addr, size_t read_size)
+{
+	u32 offset;
+
+	if (!location)
+		return -EINVAL;
+
+	offset = location->offset;
+	switch (location->storage) {
+	case SPLASH_STORAGE_NAND:
+		return splash_nand_read_raw(bmp_load_addr, offset, read_size);
+	case SPLASH_STORAGE_SF:
+		return splash_sf_read_raw(bmp_load_addr, offset, read_size);
+	default:
+		printf("Unknown splash location\n");
+	}
+
+	return -EINVAL;
+}
+
+static int splash_load_raw(struct splash_location *location, u32 bmp_load_addr)
+{
+	struct bmp_header *bmp_hdr;
+	int res;
+	size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
+
+	if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
+		goto splash_address_too_high;
+
+	res = splash_storage_read_raw(location, bmp_load_addr, bmp_header_size);
+	if (res < 0)
+		return res;
+
+	bmp_hdr = (struct bmp_header *)(uintptr_t)bmp_load_addr;
+	bmp_size = le32_to_cpu(bmp_hdr->file_size);
+
+	if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
+		goto splash_address_too_high;
+
+	return splash_storage_read_raw(location, bmp_load_addr, bmp_size);
+
+splash_address_too_high:
+	printf("Error: splashimage address too high. Data overwrites U-Boot and/or placed beyond DRAM boundaries.\n");
+
+	return -EFAULT;
+}
+
+static int splash_select_fs_dev(struct splash_location *location)
+{
+	int res;
+
+	switch (location->storage) {
+	case SPLASH_STORAGE_MMC:
+		res = fs_set_blk_dev("mmc", location->devpart, FS_TYPE_ANY);
+		break;
+	case SPLASH_STORAGE_USB:
+		res = fs_set_blk_dev("usb", location->devpart, FS_TYPE_ANY);
+		break;
+	case SPLASH_STORAGE_SATA:
+		res = fs_set_blk_dev("sata", location->devpart, FS_TYPE_ANY);
+		break;
+	case SPLASH_STORAGE_NAND:
+		if (location->ubivol != NULL)
+			res = fs_set_blk_dev("ubi", NULL, FS_TYPE_UBIFS);
+		else
+			res = -ENODEV;
+		break;
+	default:
+		printf("Error: unsupported location storage.\n");
+		return -ENODEV;
+	}
+
+	if (res)
+		printf("Error: could not access storage.\n");
+
+	return res;
+}
+
+#ifdef CONFIG_USB_STORAGE
+static int splash_init_usb(void)
+{
+	int err;
+
+	err = usb_init();
+	if (err)
+		return err;
+
+#ifndef CONFIG_DM_USB
+	err = usb_stor_scan(1) < 0 ? -ENODEV : 0;
+#endif
+
+	return err;
+}
+#else
+static inline int splash_init_usb(void)
+{
+	printf("Cannot load splash image: no USB support\n");
+	return -ENOSYS;
+}
+#endif
+
+#ifdef CONFIG_SATA
+static int splash_init_sata(void)
+{
+	return sata_probe(0);
+}
+#else
+static inline int splash_init_sata(void)
+{
+	printf("Cannot load splash image: no SATA support\n");
+	return -ENOSYS;
+}
+#endif
+
+#ifdef CONFIG_CMD_UBIFS
+static int splash_mount_ubifs(struct splash_location *location)
+{
+	int res;
+	char cmd[32];
+
+	sprintf(cmd, "ubi part %s", location->mtdpart);
+	res = run_command(cmd, 0);
+	if (res)
+		return res;
+
+	sprintf(cmd, "ubifsmount %s", location->ubivol);
+	res = run_command(cmd, 0);
+
+	return res;
+}
+
+static inline int splash_umount_ubifs(void)
+{
+	return run_command("ubifsumount", 0);
+}
+#else
+static inline int splash_mount_ubifs(struct splash_location *location)
+{
+	printf("Cannot load splash image: no UBIFS support\n");
+	return -ENOSYS;
+}
+
+static inline int splash_umount_ubifs(void)
+{
+	printf("Cannot unmount UBIFS: no UBIFS support\n");
+	return -ENOSYS;
+}
+#endif
+
+#define SPLASH_SOURCE_DEFAULT_FILE_NAME		"splash.bmp"
+
+static int splash_load_fs(struct splash_location *location, u32 bmp_load_addr)
+{
+	int res = 0;
+	loff_t bmp_size;
+	loff_t actread;
+	char *splash_file;
+
+	splash_file = env_get("splashfile");
+	if (!splash_file)
+		splash_file = SPLASH_SOURCE_DEFAULT_FILE_NAME;
+
+	if (location->storage == SPLASH_STORAGE_USB)
+		res = splash_init_usb();
+
+	if (location->storage == SPLASH_STORAGE_SATA)
+		res = splash_init_sata();
+
+	if (location->ubivol != NULL)
+		res = splash_mount_ubifs(location);
+
+	if (res)
+		return res;
+
+	res = splash_select_fs_dev(location);
+	if (res)
+		goto out;
+
+	res = fs_size(splash_file, &bmp_size);
+	if (res) {
+		printf("Error (%d): cannot determine file size\n", res);
+		goto out;
+	}
+
+	if (bmp_load_addr + bmp_size >= gd->start_addr_sp) {
+		printf("Error: splashimage address too high. Data overwrites U-Boot and/or placed beyond DRAM boundaries.\n");
+		res = -EFAULT;
+		goto out;
+	}
+
+	splash_select_fs_dev(location);
+	res = fs_read(splash_file, bmp_load_addr, 0, 0, &actread);
+
+out:
+	if (location->ubivol != NULL)
+		splash_umount_ubifs();
+
+	return res;
+}
+
+/**
+ * select_splash_location - return the splash location based on board support
+ *			    and env variable "splashsource".
+ *
+ * @locations:		An array of supported splash locations.
+ * @size:		Size of splash_locations array.
+ *
+ * @return: If a null set of splash locations is given, or
+ *	    splashsource env variable is set to unsupported value
+ *			return NULL.
+ *	    If splashsource env variable is not defined
+ *			return the first entry in splash_locations as default.
+ *	    If splashsource env variable contains a supported value
+ *			return the location selected by splashsource.
+ */
+static struct splash_location *select_splash_location(
+			    struct splash_location *locations, uint size)
+{
+	int i;
+	char *env_splashsource;
+
+	if (!locations || size == 0)
+		return NULL;
+
+	env_splashsource = env_get("splashsource");
+	if (env_splashsource == NULL)
+		return &locations[0];
+
+	for (i = 0; i < size; i++) {
+		if (!strcmp(locations[i].name, env_splashsource))
+			return &locations[i];
+	}
+
+	printf("splashsource env variable set to unsupported value\n");
+	return NULL;
+}
+
+#ifdef CONFIG_FIT
+static int splash_load_fit(struct splash_location *location, u32 bmp_load_addr)
+{
+	int res;
+	int node_offset;
+	const char *splash_file;
+	const void *internal_splash_data;
+	size_t internal_splash_size;
+	int external_splash_addr;
+	int external_splash_size;
+	bool is_splash_external = false;
+	struct image_header *img_header;
+	const u32 *fit_header;
+	u32 fit_size;
+	const size_t header_size = sizeof(struct image_header);
+
+	/* Read in image header */
+	res = splash_storage_read_raw(location, bmp_load_addr, header_size);
+	if (res < 0)
+		return res;
+
+	img_header = (struct image_header *)bmp_load_addr;
+	if (image_get_magic(img_header) != FDT_MAGIC) {
+		printf("Could not find FDT magic\n");
+		return -EINVAL;
+	}
+
+	fit_size = fdt_totalsize(img_header);
+
+	/* Read in entire FIT */
+	fit_header = (const u32 *)(bmp_load_addr + header_size);
+	res = splash_storage_read_raw(location, (u32)fit_header, fit_size);
+	if (res < 0)
+		return res;
+
+	res = fit_check_format(fit_header, IMAGE_SIZE_INVAL);
+	if (res) {
+		debug("Could not find valid FIT image\n");
+		return res;
+	}
+
+	/* Get the splash image node */
+	splash_file = env_get("splashfile");
+	if (!splash_file)
+		splash_file = SPLASH_SOURCE_DEFAULT_FILE_NAME;
+
+	node_offset = fit_image_get_node(fit_header, splash_file);
+	if (node_offset < 0) {
+		debug("Could not find splash image '%s' in FIT\n",
+		      splash_file);
+		return -ENOENT;
+	}
+
+	/* Extract the splash data from FIT */
+	/* 1. Test if splash is in FIT internal data. */
+	if (!fit_image_get_data(fit_header, node_offset, &internal_splash_data, &internal_splash_size))
+		memmove((void *)bmp_load_addr, internal_splash_data, internal_splash_size);
+	/* 2. Test if splash is in FIT external data with fixed position. */
+	else if (!fit_image_get_data_position(fit_header, node_offset, &external_splash_addr))
+		is_splash_external = true;
+	/* 3. Test if splash is in FIT external data with offset. */
+	else if (!fit_image_get_data_offset(fit_header, node_offset, &external_splash_addr)) {
+		/* Align data offset to 4-byte boundary */
+		fit_size = ALIGN(fdt_totalsize(fit_header), 4);
+		/* External splash offset means the offset by end of FIT header */
+		external_splash_addr += location->offset + fit_size;
+		is_splash_external = true;
+	} else {
+		printf("Failed to get splash image from FIT\n");
+		return -ENODATA;
+	}
+
+	if (is_splash_external) {
+		res = fit_image_get_data_size(fit_header, node_offset, &external_splash_size);
+		if (res < 0) {
+			printf("Failed to get size of splash image (err=%d)\n", res);
+			return res;
+		}
+
+		/* Read in the splash data */
+		location->offset = external_splash_addr;
+		res = splash_storage_read_raw(location, bmp_load_addr, external_splash_size);
+		if (res < 0)
+			return res;
+	}
+
+	return 0;
+}
+#endif /* CONFIG_FIT */
+
+/**
+ * splash_source_load - load splash image from a supported location.
+ *
+ * Select a splash image location based on the value of splashsource environment
+ * variable and the board supported splash source locations, and load a
+ * splashimage to the address pointed to by splashimage environment variable.
+ *
+ * @locations:		An array of supported splash locations.
+ * @size:		Size of splash_locations array.
+ *
+ * @return: 0 on success, negative value on failure.
+ */
+int splash_source_load(struct splash_location *locations, uint size)
+{
+	struct splash_location *splash_location;
+	char *env_splashimage_value;
+	u32 bmp_load_addr;
+
+	env_splashimage_value = env_get("splashimage");
+	if (env_splashimage_value == NULL)
+		return -ENOENT;
+
+	bmp_load_addr = hextoul(env_splashimage_value, 0);
+	if (bmp_load_addr == 0) {
+		printf("Error: bad splashimage address specified\n");
+		return -EFAULT;
+	}
+
+	splash_location = select_splash_location(locations, size);
+	if (!splash_location)
+		return -EINVAL;
+
+	if (splash_location->flags == SPLASH_STORAGE_RAW)
+		return splash_load_raw(splash_location, bmp_load_addr);
+	else if (splash_location->flags == SPLASH_STORAGE_FS)
+		return splash_load_fs(splash_location, bmp_load_addr);
+#ifdef CONFIG_FIT
+	else if (splash_location->flags == SPLASH_STORAGE_FIT)
+		return splash_load_fit(splash_location, bmp_load_addr);
+#endif
+	return -EINVAL;
+}