[uboot] create uboot from github:

repo: https://github.com/u-boot/u-boot
	commit: d80bb749fab53da72c4a0e09b8c2d2aaa3103c91

Change-Id: Ie6434426e1ec15bc08bb1832798e371f3fd5fb29

u-boot-2021.10/drivers/ddr/marvell/a38x/ddr3_init.c

@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ */
+
+#include "ddr3_init.h"
+#include "mv_ddr_common.h"
+
+static char *ddr_type = "DDR3";
+
+/*
+ * generic_init_controller controls D-unit configuration:
+ * '1' - dynamic D-unit configuration,
+ */
+u8 generic_init_controller = 1;
+
+static int mv_ddr_training_params_set(u8 dev_num);
+
+/*
+ * Name:     ddr3_init - Main DDR3 Init function
+ * Desc:     This routine initialize the DDR3 MC and runs HW training.
+ * Args:     None.
+ * Notes:
+ * Returns:  None.
+ */
+int ddr3_init(void)
+{
+	int status;
+	int is_manual_cal_done;
+
+	/* Print mv_ddr version */
+	mv_ddr_ver_print();
+
+	mv_ddr_pre_training_fixup();
+
+	/* SoC/Board special initializations */
+	mv_ddr_pre_training_soc_config(ddr_type);
+
+	/* Set log level for training library */
+	mv_ddr_user_log_level_set(DEBUG_BLOCK_ALL);
+
+	mv_ddr_early_init();
+
+	if (mv_ddr_topology_map_update()) {
+		printf("mv_ddr: failed to update topology\n");
+		return MV_FAIL;
+	}
+
+	if (mv_ddr_early_init2() != MV_OK)
+		return MV_FAIL;
+
+	/* Set training algorithm's parameters */
+	status = mv_ddr_training_params_set(0);
+	if (MV_OK != status)
+		return status;
+
+	mv_ddr_mc_config();
+
+	is_manual_cal_done = mv_ddr_manual_cal_do();
+
+	mv_ddr_mc_init();
+
+	if (!is_manual_cal_done) {
+	}
+
+
+	status = ddr3_silicon_post_init();
+	if (MV_OK != status) {
+		printf("DDR3 Post Init - FAILED 0x%x\n", status);
+		return status;
+	}
+
+	/* PHY initialization (Training) */
+	status = hws_ddr3_tip_run_alg(0, ALGO_TYPE_DYNAMIC);
+	if (MV_OK != status) {
+		printf("%s Training Sequence - FAILED\n", ddr_type);
+		return status;
+	}
+
+
+	/* Post MC/PHY initializations */
+	mv_ddr_post_training_soc_config(ddr_type);
+
+	mv_ddr_post_training_fixup();
+
+	if (mv_ddr_is_ecc_ena())
+		mv_ddr_mem_scrubbing();
+
+	printf("mv_ddr: completed successfully\n");
+
+	return MV_OK;
+}
+
+/*
+ * Name:	mv_ddr_training_params_set
+ * Desc:
+ * Args:
+ * Notes:	sets internal training params
+ * Returns:
+ */
+static int mv_ddr_training_params_set(u8 dev_num)
+{
+	struct tune_train_params params;
+	struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
+	int status;
+	u32 cs_num;
+	int ck_delay;
+
+	cs_num = mv_ddr_cs_num_get();
+	ck_delay = mv_ddr_ck_delay_get();
+
+	/* NOTE: do not remove any field initilization */
+	params.ck_delay = TUNE_TRAINING_PARAMS_CK_DELAY;
+	params.phy_reg3_val = TUNE_TRAINING_PARAMS_PHYREG3VAL;
+	params.g_zpri_data = TUNE_TRAINING_PARAMS_PRI_DATA;
+	params.g_znri_data = TUNE_TRAINING_PARAMS_NRI_DATA;
+	params.g_zpri_ctrl = TUNE_TRAINING_PARAMS_PRI_CTRL;
+	params.g_znri_ctrl = TUNE_TRAINING_PARAMS_NRI_CTRL;
+	params.g_znodt_data = TUNE_TRAINING_PARAMS_N_ODT_DATA;
+	params.g_zpodt_ctrl = TUNE_TRAINING_PARAMS_P_ODT_CTRL;
+	params.g_znodt_ctrl = TUNE_TRAINING_PARAMS_N_ODT_CTRL;
+
+	params.g_zpodt_data = TUNE_TRAINING_PARAMS_P_ODT_DATA;
+	params.g_dic = TUNE_TRAINING_PARAMS_DIC;
+	params.g_rtt_nom = TUNE_TRAINING_PARAMS_RTT_NOM;
+	if (cs_num == 1) {
+		params.g_rtt_wr = TUNE_TRAINING_PARAMS_RTT_WR_1CS;
+		params.g_odt_config = TUNE_TRAINING_PARAMS_ODT_CONFIG_1CS;
+	} else {
+		params.g_rtt_wr = TUNE_TRAINING_PARAMS_RTT_WR_2CS;
+		params.g_odt_config = TUNE_TRAINING_PARAMS_ODT_CONFIG_2CS;
+	}
+
+	if (ck_delay > 0)
+		params.ck_delay = ck_delay;
+
+	/* Use platform specific override ODT value */
+	if (tm->odt_config)
+		params.g_odt_config = tm->odt_config;
+
+	status = ddr3_tip_tune_training_params(dev_num, &params);
+	if (MV_OK != status) {
+		printf("%s Training Sequence - FAILED\n", ddr_type);
+		return status;
+	}
+
+	return MV_OK;
+}