This is
/ldhome/software/toolsbuild/slave2/workspace/Toolchain/release-riscv-0/build-riscv-gcc-riscv64-unknown-linux-gnu/build-riscv64-linux-x86_64/build-glibc-linux-rv64imafdcvxtheadc-lp64dv/manual/libc.info,
produced by makeinfo version 4.9 from libc.texinfo.

INFO-DIR-SECTION Software libraries
START-INFO-DIR-ENTRY
* Libc: (libc).                 C library.
END-INFO-DIR-ENTRY

INFO-DIR-SECTION GNU C library functions and macros
START-INFO-DIR-ENTRY
* ALTWERASE: (libc)Local Modes.
* ARGP_ERR_UNKNOWN: (libc)Argp Parser Functions.
* ARG_MAX: (libc)General Limits.
* BC_BASE_MAX: (libc)Utility Limits.
* BC_DIM_MAX: (libc)Utility Limits.
* BC_SCALE_MAX: (libc)Utility Limits.
* BC_STRING_MAX: (libc)Utility Limits.
* BRKINT: (libc)Input Modes.
* BUFSIZ: (libc)Controlling Buffering.
* CCTS_OFLOW: (libc)Control Modes.
* CHAR_BIT: (libc)Width of Type.
* CHILD_MAX: (libc)General Limits.
* CIGNORE: (libc)Control Modes.
* CLK_TCK: (libc)Processor Time.
* CLOCAL: (libc)Control Modes.
* CLOCKS_PER_SEC: (libc)CPU Time.
* COLL_WEIGHTS_MAX: (libc)Utility Limits.
* CPU_CLR: (libc)CPU Affinity.
* CPU_ISSET: (libc)CPU Affinity.
* CPU_SET: (libc)CPU Affinity.
* CPU_SETSIZE: (libc)CPU Affinity.
* CPU_ZERO: (libc)CPU Affinity.
* CREAD: (libc)Control Modes.
* CRTS_IFLOW: (libc)Control Modes.
* CS5: (libc)Control Modes.
* CS6: (libc)Control Modes.
* CS7: (libc)Control Modes.
* CS8: (libc)Control Modes.
* CSIZE: (libc)Control Modes.
* CSTOPB: (libc)Control Modes.
* DTTOIF: (libc)Directory Entries.
* E2BIG: (libc)Error Codes.
* EACCES: (libc)Error Codes.
* EADDRINUSE: (libc)Error Codes.
* EADDRNOTAVAIL: (libc)Error Codes.
* EADV: (libc)Error Codes.
* EAFNOSUPPORT: (libc)Error Codes.
* EAGAIN: (libc)Error Codes.
* EALREADY: (libc)Error Codes.
* EAUTH: (libc)Error Codes.
* EBACKGROUND: (libc)Error Codes.
* EBADE: (libc)Error Codes.
* EBADF: (libc)Error Codes.
* EBADFD: (libc)Error Codes.
* EBADMSG: (libc)Error Codes.
* EBADR: (libc)Error Codes.
* EBADRPC: (libc)Error Codes.
* EBADRQC: (libc)Error Codes.
* EBADSLT: (libc)Error Codes.
* EBFONT: (libc)Error Codes.
* EBUSY: (libc)Error Codes.
* ECANCELED: (libc)Error Codes.
* ECHILD: (libc)Error Codes.
* ECHO: (libc)Local Modes.
* ECHOCTL: (libc)Local Modes.
* ECHOE: (libc)Local Modes.
* ECHOK: (libc)Local Modes.
* ECHOKE: (libc)Local Modes.
* ECHONL: (libc)Local Modes.
* ECHOPRT: (libc)Local Modes.
* ECHRNG: (libc)Error Codes.
* ECOMM: (libc)Error Codes.
* ECONNABORTED: (libc)Error Codes.
* ECONNREFUSED: (libc)Error Codes.
* ECONNRESET: (libc)Error Codes.
* ED: (libc)Error Codes.
* EDEADLK: (libc)Error Codes.
* EDEADLOCK: (libc)Error Codes.
* EDESTADDRREQ: (libc)Error Codes.
* EDIED: (libc)Error Codes.
* EDOM: (libc)Error Codes.
* EDOTDOT: (libc)Error Codes.
* EDQUOT: (libc)Error Codes.
* EEXIST: (libc)Error Codes.
* EFAULT: (libc)Error Codes.
* EFBIG: (libc)Error Codes.
* EFTYPE: (libc)Error Codes.
* EGRATUITOUS: (libc)Error Codes.
* EGREGIOUS: (libc)Error Codes.
* EHOSTDOWN: (libc)Error Codes.
* EHOSTUNREACH: (libc)Error Codes.
* EHWPOISON: (libc)Error Codes.
* EIDRM: (libc)Error Codes.
* EIEIO: (libc)Error Codes.
* EILSEQ: (libc)Error Codes.
* EINPROGRESS: (libc)Error Codes.
* EINTR: (libc)Error Codes.
* EINVAL: (libc)Error Codes.
* EIO: (libc)Error Codes.
* EISCONN: (libc)Error Codes.
* EISDIR: (libc)Error Codes.
* EISNAM: (libc)Error Codes.
* EKEYEXPIRED: (libc)Error Codes.
* EKEYREJECTED: (libc)Error Codes.
* EKEYREVOKED: (libc)Error Codes.
* EL2HLT: (libc)Error Codes.
* EL2NSYNC: (libc)Error Codes.
* EL3HLT: (libc)Error Codes.
* EL3RST: (libc)Error Codes.
* ELIBACC: (libc)Error Codes.
* ELIBBAD: (libc)Error Codes.
* ELIBEXEC: (libc)Error Codes.
* ELIBMAX: (libc)Error Codes.
* ELIBSCN: (libc)Error Codes.
* ELNRNG: (libc)Error Codes.
* ELOOP: (libc)Error Codes.
* EMEDIUMTYPE: (libc)Error Codes.
* EMFILE: (libc)Error Codes.
* EMLINK: (libc)Error Codes.
* EMSGSIZE: (libc)Error Codes.
* EMULTIHOP: (libc)Error Codes.
* ENAMETOOLONG: (libc)Error Codes.
* ENAVAIL: (libc)Error Codes.
* ENEEDAUTH: (libc)Error Codes.
* ENETDOWN: (libc)Error Codes.
* ENETRESET: (libc)Error Codes.
* ENETUNREACH: (libc)Error Codes.
* ENFILE: (libc)Error Codes.
* ENOANO: (libc)Error Codes.
* ENOBUFS: (libc)Error Codes.
* ENOCSI: (libc)Error Codes.
* ENODATA: (libc)Error Codes.
* ENODEV: (libc)Error Codes.
* ENOENT: (libc)Error Codes.
* ENOEXEC: (libc)Error Codes.
* ENOKEY: (libc)Error Codes.
* ENOLCK: (libc)Error Codes.
* ENOLINK: (libc)Error Codes.
* ENOMEDIUM: (libc)Error Codes.
* ENOMEM: (libc)Error Codes.
* ENOMSG: (libc)Error Codes.
* ENONET: (libc)Error Codes.
* ENOPKG: (libc)Error Codes.
* ENOPROTOOPT: (libc)Error Codes.
* ENOSPC: (libc)Error Codes.
* ENOSR: (libc)Error Codes.
* ENOSTR: (libc)Error Codes.
* ENOSYS: (libc)Error Codes.
* ENOTBLK: (libc)Error Codes.
* ENOTCONN: (libc)Error Codes.
* ENOTDIR: (libc)Error Codes.
* ENOTEMPTY: (libc)Error Codes.
* ENOTNAM: (libc)Error Codes.
* ENOTRECOVERABLE: (libc)Error Codes.
* ENOTSOCK: (libc)Error Codes.
* ENOTSUP: (libc)Error Codes.
* ENOTTY: (libc)Error Codes.
* ENOTUNIQ: (libc)Error Codes.
* ENXIO: (libc)Error Codes.
* EOF: (libc)EOF and Errors.
* EOPNOTSUPP: (libc)Error Codes.
* EOVERFLOW: (libc)Error Codes.
* EOWNERDEAD: (libc)Error Codes.
* EPERM: (libc)Error Codes.
* EPFNOSUPPORT: (libc)Error Codes.
* EPIPE: (libc)Error Codes.
* EPROCLIM: (libc)Error Codes.
* EPROCUNAVAIL: (libc)Error Codes.
* EPROGMISMATCH: (libc)Error Codes.
* EPROGUNAVAIL: (libc)Error Codes.
* EPROTO: (libc)Error Codes.
* EPROTONOSUPPORT: (libc)Error Codes.
* EPROTOTYPE: (libc)Error Codes.
* EQUIV_CLASS_MAX: (libc)Utility Limits.
* ERANGE: (libc)Error Codes.
* EREMCHG: (libc)Error Codes.
* EREMOTE: (libc)Error Codes.
* EREMOTEIO: (libc)Error Codes.
* ERESTART: (libc)Error Codes.
* ERFKILL: (libc)Error Codes.
* EROFS: (libc)Error Codes.
* ERPCMISMATCH: (libc)Error Codes.
* ESHUTDOWN: (libc)Error Codes.
* ESOCKTNOSUPPORT: (libc)Error Codes.
* ESPIPE: (libc)Error Codes.
* ESRCH: (libc)Error Codes.
* ESRMNT: (libc)Error Codes.
* ESTALE: (libc)Error Codes.
* ESTRPIPE: (libc)Error Codes.
* ETIME: (libc)Error Codes.
* ETIMEDOUT: (libc)Error Codes.
* ETOOMANYREFS: (libc)Error Codes.
* ETXTBSY: (libc)Error Codes.
* EUCLEAN: (libc)Error Codes.
* EUNATCH: (libc)Error Codes.
* EUSERS: (libc)Error Codes.
* EWOULDBLOCK: (libc)Error Codes.
* EXDEV: (libc)Error Codes.
* EXFULL: (libc)Error Codes.
* EXIT_FAILURE: (libc)Exit Status.
* EXIT_SUCCESS: (libc)Exit Status.
* EXPR_NEST_MAX: (libc)Utility Limits.
* FD_CLOEXEC: (libc)Descriptor Flags.
* FD_CLR: (libc)Waiting for I/O.
* FD_ISSET: (libc)Waiting for I/O.
* FD_SET: (libc)Waiting for I/O.
* FD_SETSIZE: (libc)Waiting for I/O.
* FD_ZERO: (libc)Waiting for I/O.
* FE_SNANS_ALWAYS_SIGNAL: (libc)Infinity and NaN.
* FILENAME_MAX: (libc)Limits for Files.
* FLUSHO: (libc)Local Modes.
* FOPEN_MAX: (libc)Opening Streams.
* FP_ILOGB0: (libc)Exponents and Logarithms.
* FP_ILOGBNAN: (libc)Exponents and Logarithms.
* FP_LLOGB0: (libc)Exponents and Logarithms.
* FP_LLOGBNAN: (libc)Exponents and Logarithms.
* F_DUPFD: (libc)Duplicating Descriptors.
* F_GETFD: (libc)Descriptor Flags.
* F_GETFL: (libc)Getting File Status Flags.
* F_GETLK: (libc)File Locks.
* F_GETOWN: (libc)Interrupt Input.
* F_OFD_GETLK: (libc)Open File Description Locks.
* F_OFD_SETLK: (libc)Open File Description Locks.
* F_OFD_SETLKW: (libc)Open File Description Locks.
* F_OK: (libc)Testing File Access.
* F_SETFD: (libc)Descriptor Flags.
* F_SETFL: (libc)Getting File Status Flags.
* F_SETLK: (libc)File Locks.
* F_SETLKW: (libc)File Locks.
* F_SETOWN: (libc)Interrupt Input.
* HUGE_VAL: (libc)Math Error Reporting.
* HUGE_VALF: (libc)Math Error Reporting.
* HUGE_VALL: (libc)Math Error Reporting.
* HUGE_VAL_FN: (libc)Math Error Reporting.
* HUGE_VAL_FNx: (libc)Math Error Reporting.
* HUPCL: (libc)Control Modes.
* I: (libc)Complex Numbers.
* ICANON: (libc)Local Modes.
* ICRNL: (libc)Input Modes.
* IEXTEN: (libc)Local Modes.
* IFNAMSIZ: (libc)Interface Naming.
* IFTODT: (libc)Directory Entries.
* IGNBRK: (libc)Input Modes.
* IGNCR: (libc)Input Modes.
* IGNPAR: (libc)Input Modes.
* IMAXBEL: (libc)Input Modes.
* INADDR_ANY: (libc)Host Address Data Type.
* INADDR_BROADCAST: (libc)Host Address Data Type.
* INADDR_LOOPBACK: (libc)Host Address Data Type.
* INADDR_NONE: (libc)Host Address Data Type.
* INFINITY: (libc)Infinity and NaN.
* INLCR: (libc)Input Modes.
* INPCK: (libc)Input Modes.
* IPPORT_RESERVED: (libc)Ports.
* IPPORT_USERRESERVED: (libc)Ports.
* ISIG: (libc)Local Modes.
* ISTRIP: (libc)Input Modes.
* IXANY: (libc)Input Modes.
* IXOFF: (libc)Input Modes.
* IXON: (libc)Input Modes.
* LINE_MAX: (libc)Utility Limits.
* LINK_MAX: (libc)Limits for Files.
* L_ctermid: (libc)Identifying the Terminal.
* L_cuserid: (libc)Who Logged In.
* L_tmpnam: (libc)Temporary Files.
* MAXNAMLEN: (libc)Limits for Files.
* MAXSYMLINKS: (libc)Symbolic Links.
* MAX_CANON: (libc)Limits for Files.
* MAX_INPUT: (libc)Limits for Files.
* MB_CUR_MAX: (libc)Selecting the Conversion.
* MB_LEN_MAX: (libc)Selecting the Conversion.
* MDMBUF: (libc)Control Modes.
* MSG_DONTROUTE: (libc)Socket Data Options.
* MSG_OOB: (libc)Socket Data Options.
* MSG_PEEK: (libc)Socket Data Options.
* NAME_MAX: (libc)Limits for Files.
* NAN: (libc)Infinity and NaN.
* NCCS: (libc)Mode Data Types.
* NGROUPS_MAX: (libc)General Limits.
* NOFLSH: (libc)Local Modes.
* NOKERNINFO: (libc)Local Modes.
* NSIG: (libc)Standard Signals.
* NULL: (libc)Null Pointer Constant.
* ONLCR: (libc)Output Modes.
* ONOEOT: (libc)Output Modes.
* OPEN_MAX: (libc)General Limits.
* OPOST: (libc)Output Modes.
* OXTABS: (libc)Output Modes.
* O_ACCMODE: (libc)Access Modes.
* O_APPEND: (libc)Operating Modes.
* O_ASYNC: (libc)Operating Modes.
* O_CREAT: (libc)Open-time Flags.
* O_EXCL: (libc)Open-time Flags.
* O_EXEC: (libc)Access Modes.
* O_EXLOCK: (libc)Open-time Flags.
* O_FSYNC: (libc)Operating Modes.
* O_IGNORE_CTTY: (libc)Open-time Flags.
* O_NDELAY: (libc)Operating Modes.
* O_NOATIME: (libc)Operating Modes.
* O_NOCTTY: (libc)Open-time Flags.
* O_NOLINK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Operating Modes.
* O_NOTRANS: (libc)Open-time Flags.
* O_RDONLY: (libc)Access Modes.
* O_RDWR: (libc)Access Modes.
* O_READ: (libc)Access Modes.
* O_SHLOCK: (libc)Open-time Flags.
* O_SYNC: (libc)Operating Modes.
* O_TMPFILE: (libc)Open-time Flags.
* O_TRUNC: (libc)Open-time Flags.
* O_WRITE: (libc)Access Modes.
* O_WRONLY: (libc)Access Modes.
* PARENB: (libc)Control Modes.
* PARMRK: (libc)Input Modes.
* PARODD: (libc)Control Modes.
* PATH_MAX: (libc)Limits for Files.
* PA_FLAG_MASK: (libc)Parsing a Template String.
* PENDIN: (libc)Local Modes.
* PF_FILE: (libc)Local Namespace Details.
* PF_INET6: (libc)Internet Namespace.
* PF_INET: (libc)Internet Namespace.
* PF_LOCAL: (libc)Local Namespace Details.
* PF_UNIX: (libc)Local Namespace Details.
* PIPE_BUF: (libc)Limits for Files.
* P_tmpdir: (libc)Temporary Files.
* RAND_MAX: (libc)ISO Random.
* RE_DUP_MAX: (libc)General Limits.
* RLIM_INFINITY: (libc)Limits on Resources.
* R_OK: (libc)Testing File Access.
* SA_NOCLDSTOP: (libc)Flags for Sigaction.
* SA_ONSTACK: (libc)Flags for Sigaction.
* SA_RESTART: (libc)Flags for Sigaction.
* SEEK_CUR: (libc)File Positioning.
* SEEK_END: (libc)File Positioning.
* SEEK_SET: (libc)File Positioning.
* SIGABRT: (libc)Program Error Signals.
* SIGALRM: (libc)Alarm Signals.
* SIGBUS: (libc)Program Error Signals.
* SIGCHLD: (libc)Job Control Signals.
* SIGCLD: (libc)Job Control Signals.
* SIGCONT: (libc)Job Control Signals.
* SIGEMT: (libc)Program Error Signals.
* SIGFPE: (libc)Program Error Signals.
* SIGHUP: (libc)Termination Signals.
* SIGILL: (libc)Program Error Signals.
* SIGINFO: (libc)Miscellaneous Signals.
* SIGINT: (libc)Termination Signals.
* SIGIO: (libc)Asynchronous I/O Signals.
* SIGIOT: (libc)Program Error Signals.
* SIGKILL: (libc)Termination Signals.
* SIGLOST: (libc)Operation Error Signals.
* SIGPIPE: (libc)Operation Error Signals.
* SIGPOLL: (libc)Asynchronous I/O Signals.
* SIGPROF: (libc)Alarm Signals.
* SIGQUIT: (libc)Termination Signals.
* SIGSEGV: (libc)Program Error Signals.
* SIGSTOP: (libc)Job Control Signals.
* SIGSYS: (libc)Program Error Signals.
* SIGTERM: (libc)Termination Signals.
* SIGTRAP: (libc)Program Error Signals.
* SIGTSTP: (libc)Job Control Signals.
* SIGTTIN: (libc)Job Control Signals.
* SIGTTOU: (libc)Job Control Signals.
* SIGURG: (libc)Asynchronous I/O Signals.
* SIGUSR1: (libc)Miscellaneous Signals.
* SIGUSR2: (libc)Miscellaneous Signals.
* SIGVTALRM: (libc)Alarm Signals.
* SIGWINCH: (libc)Miscellaneous Signals.
* SIGXCPU: (libc)Operation Error Signals.
* SIGXFSZ: (libc)Operation Error Signals.
* SIG_ERR: (libc)Basic Signal Handling.
* SNAN: (libc)Infinity and NaN.
* SNANF: (libc)Infinity and NaN.
* SNANFN: (libc)Infinity and NaN.
* SNANFNx: (libc)Infinity and NaN.
* SNANL: (libc)Infinity and NaN.
* SOCK_DGRAM: (libc)Communication Styles.
* SOCK_RAW: (libc)Communication Styles.
* SOCK_RDM: (libc)Communication Styles.
* SOCK_SEQPACKET: (libc)Communication Styles.
* SOCK_STREAM: (libc)Communication Styles.
* SOL_SOCKET: (libc)Socket-Level Options.
* SSIZE_MAX: (libc)General Limits.
* STREAM_MAX: (libc)General Limits.
* SUN_LEN: (libc)Local Namespace Details.
* S_IFMT: (libc)Testing File Type.
* S_ISBLK: (libc)Testing File Type.
* S_ISCHR: (libc)Testing File Type.
* S_ISDIR: (libc)Testing File Type.
* S_ISFIFO: (libc)Testing File Type.
* S_ISLNK: (libc)Testing File Type.
* S_ISREG: (libc)Testing File Type.
* S_ISSOCK: (libc)Testing File Type.
* S_TYPEISMQ: (libc)Testing File Type.
* S_TYPEISSEM: (libc)Testing File Type.
* S_TYPEISSHM: (libc)Testing File Type.
* TMP_MAX: (libc)Temporary Files.
* TOSTOP: (libc)Local Modes.
* TZNAME_MAX: (libc)General Limits.
* VDISCARD: (libc)Other Special.
* VDSUSP: (libc)Signal Characters.
* VEOF: (libc)Editing Characters.
* VEOL2: (libc)Editing Characters.
* VEOL: (libc)Editing Characters.
* VERASE: (libc)Editing Characters.
* VINTR: (libc)Signal Characters.
* VKILL: (libc)Editing Characters.
* VLNEXT: (libc)Other Special.
* VMIN: (libc)Noncanonical Input.
* VQUIT: (libc)Signal Characters.
* VREPRINT: (libc)Editing Characters.
* VSTART: (libc)Start/Stop Characters.
* VSTATUS: (libc)Other Special.
* VSTOP: (libc)Start/Stop Characters.
* VSUSP: (libc)Signal Characters.
* VTIME: (libc)Noncanonical Input.
* VWERASE: (libc)Editing Characters.
* WCHAR_MAX: (libc)Extended Char Intro.
* WCHAR_MIN: (libc)Extended Char Intro.
* WCOREDUMP: (libc)Process Completion Status.
* WEOF: (libc)EOF and Errors.
* WEOF: (libc)Extended Char Intro.
* WEXITSTATUS: (libc)Process Completion Status.
* WIFEXITED: (libc)Process Completion Status.
* WIFSIGNALED: (libc)Process Completion Status.
* WIFSTOPPED: (libc)Process Completion Status.
* WSTOPSIG: (libc)Process Completion Status.
* WTERMSIG: (libc)Process Completion Status.
* W_OK: (libc)Testing File Access.
* X_OK: (libc)Testing File Access.
* _Complex_I: (libc)Complex Numbers.
* _Exit: (libc)Termination Internals.
* _IOFBF: (libc)Controlling Buffering.
* _IOLBF: (libc)Controlling Buffering.
* _IONBF: (libc)Controlling Buffering.
* _Imaginary_I: (libc)Complex Numbers.
* _PATH_UTMP: (libc)Manipulating the Database.
* _PATH_WTMP: (libc)Manipulating the Database.
* _POSIX2_C_DEV: (libc)System Options.
* _POSIX2_C_VERSION: (libc)Version Supported.
* _POSIX2_FORT_DEV: (libc)System Options.
* _POSIX2_FORT_RUN: (libc)System Options.
* _POSIX2_LOCALEDEF: (libc)System Options.
* _POSIX2_SW_DEV: (libc)System Options.
* _POSIX_CHOWN_RESTRICTED: (libc)Options for Files.
* _POSIX_JOB_CONTROL: (libc)System Options.
* _POSIX_NO_TRUNC: (libc)Options for Files.
* _POSIX_SAVED_IDS: (libc)System Options.
* _POSIX_VDISABLE: (libc)Options for Files.
* _POSIX_VERSION: (libc)Version Supported.
* __fbufsize: (libc)Controlling Buffering.
* __flbf: (libc)Controlling Buffering.
* __fpending: (libc)Controlling Buffering.
* __fpurge: (libc)Flushing Buffers.
* __freadable: (libc)Opening Streams.
* __freading: (libc)Opening Streams.
* __fsetlocking: (libc)Streams and Threads.
* __fwritable: (libc)Opening Streams.
* __fwriting: (libc)Opening Streams.
* __gconv_end_fct: (libc)glibc iconv Implementation.
* __gconv_fct: (libc)glibc iconv Implementation.
* __gconv_init_fct: (libc)glibc iconv Implementation.
* __ppc_get_timebase: (libc)PowerPC.
* __ppc_get_timebase_freq: (libc)PowerPC.
* __ppc_mdoio: (libc)PowerPC.
* __ppc_mdoom: (libc)PowerPC.
* __ppc_set_ppr_low: (libc)PowerPC.
* __ppc_set_ppr_med: (libc)PowerPC.
* __ppc_set_ppr_med_high: (libc)PowerPC.
* __ppc_set_ppr_med_low: (libc)PowerPC.
* __ppc_set_ppr_very_low: (libc)PowerPC.
* __ppc_yield: (libc)PowerPC.
* __riscv_flush_icache: (libc)RISC-V.
* __va_copy: (libc)Argument Macros.
* _exit: (libc)Termination Internals.
* _flushlbf: (libc)Flushing Buffers.
* _tolower: (libc)Case Conversion.
* _toupper: (libc)Case Conversion.
* a64l: (libc)Encode Binary Data.
* abort: (libc)Aborting a Program.
* abs: (libc)Absolute Value.
* accept: (libc)Accepting Connections.
* access: (libc)Testing File Access.
* acos: (libc)Inverse Trig Functions.
* acosf: (libc)Inverse Trig Functions.
* acosfN: (libc)Inverse Trig Functions.
* acosfNx: (libc)Inverse Trig Functions.
* acosh: (libc)Hyperbolic Functions.
* acoshf: (libc)Hyperbolic Functions.
* acoshfN: (libc)Hyperbolic Functions.
* acoshfNx: (libc)Hyperbolic Functions.
* acoshl: (libc)Hyperbolic Functions.
* acosl: (libc)Inverse Trig Functions.
* addmntent: (libc)mtab.
* addseverity: (libc)Adding Severity Classes.
* adjtime: (libc)High-Resolution Calendar.
* adjtimex: (libc)High-Resolution Calendar.
* aio_cancel64: (libc)Cancel AIO Operations.
* aio_cancel: (libc)Cancel AIO Operations.
* aio_error64: (libc)Status of AIO Operations.
* aio_error: (libc)Status of AIO Operations.
* aio_fsync64: (libc)Synchronizing AIO Operations.
* aio_fsync: (libc)Synchronizing AIO Operations.
* aio_init: (libc)Configuration of AIO.
* aio_read64: (libc)Asynchronous Reads/Writes.
* aio_read: (libc)Asynchronous Reads/Writes.
* aio_return64: (libc)Status of AIO Operations.
* aio_return: (libc)Status of AIO Operations.
* aio_suspend64: (libc)Synchronizing AIO Operations.
* aio_suspend: (libc)Synchronizing AIO Operations.
* aio_write64: (libc)Asynchronous Reads/Writes.
* aio_write: (libc)Asynchronous Reads/Writes.
* alarm: (libc)Setting an Alarm.
* aligned_alloc: (libc)Aligned Memory Blocks.
* alloca: (libc)Variable Size Automatic.
* alphasort64: (libc)Scanning Directory Content.
* alphasort: (libc)Scanning Directory Content.
* argp_error: (libc)Argp Helper Functions.
* argp_failure: (libc)Argp Helper Functions.
* argp_help: (libc)Argp Help.
* argp_parse: (libc)Argp.
* argp_state_help: (libc)Argp Helper Functions.
* argp_usage: (libc)Argp Helper Functions.
* argz_add: (libc)Argz Functions.
* argz_add_sep: (libc)Argz Functions.
* argz_append: (libc)Argz Functions.
* argz_count: (libc)Argz Functions.
* argz_create: (libc)Argz Functions.
* argz_create_sep: (libc)Argz Functions.
* argz_delete: (libc)Argz Functions.
* argz_extract: (libc)Argz Functions.
* argz_insert: (libc)Argz Functions.
* argz_next: (libc)Argz Functions.
* argz_replace: (libc)Argz Functions.
* argz_stringify: (libc)Argz Functions.
* asctime: (libc)Formatting Calendar Time.
* asctime_r: (libc)Formatting Calendar Time.
* asin: (libc)Inverse Trig Functions.
* asinf: (libc)Inverse Trig Functions.
* asinfN: (libc)Inverse Trig Functions.
* asinfNx: (libc)Inverse Trig Functions.
* asinh: (libc)Hyperbolic Functions.
* asinhf: (libc)Hyperbolic Functions.
* asinhfN: (libc)Hyperbolic Functions.
* asinhfNx: (libc)Hyperbolic Functions.
* asinhl: (libc)Hyperbolic Functions.
* asinl: (libc)Inverse Trig Functions.
* asprintf: (libc)Dynamic Output.
* assert: (libc)Consistency Checking.
* assert_perror: (libc)Consistency Checking.
* atan2: (libc)Inverse Trig Functions.
* atan2f: (libc)Inverse Trig Functions.
* atan2fN: (libc)Inverse Trig Functions.
* atan2fNx: (libc)Inverse Trig Functions.
* atan2l: (libc)Inverse Trig Functions.
* atan: (libc)Inverse Trig Functions.
* atanf: (libc)Inverse Trig Functions.
* atanfN: (libc)Inverse Trig Functions.
* atanfNx: (libc)Inverse Trig Functions.
* atanh: (libc)Hyperbolic Functions.
* atanhf: (libc)Hyperbolic Functions.
* atanhfN: (libc)Hyperbolic Functions.
* atanhfNx: (libc)Hyperbolic Functions.
* atanhl: (libc)Hyperbolic Functions.
* atanl: (libc)Inverse Trig Functions.
* atexit: (libc)Cleanups on Exit.
* atof: (libc)Parsing of Floats.
* atoi: (libc)Parsing of Integers.
* atol: (libc)Parsing of Integers.
* atoll: (libc)Parsing of Integers.
* backtrace: (libc)Backtraces.
* backtrace_symbols: (libc)Backtraces.
* backtrace_symbols_fd: (libc)Backtraces.
* basename: (libc)Finding Tokens in a String.
* basename: (libc)Finding Tokens in a String.
* bcmp: (libc)String/Array Comparison.
* bcopy: (libc)Copying Strings and Arrays.
* bind: (libc)Setting Address.
* bind_textdomain_codeset: (libc)Charset conversion in gettext.
* bindtextdomain: (libc)Locating gettext catalog.
* brk: (libc)Resizing the Data Segment.
* bsearch: (libc)Array Search Function.
* btowc: (libc)Converting a Character.
* bzero: (libc)Copying Strings and Arrays.
* cabs: (libc)Absolute Value.
* cabsf: (libc)Absolute Value.
* cabsfN: (libc)Absolute Value.
* cabsfNx: (libc)Absolute Value.
* cabsl: (libc)Absolute Value.
* cacos: (libc)Inverse Trig Functions.
* cacosf: (libc)Inverse Trig Functions.
* cacosfN: (libc)Inverse Trig Functions.
* cacosfNx: (libc)Inverse Trig Functions.
* cacosh: (libc)Hyperbolic Functions.
* cacoshf: (libc)Hyperbolic Functions.
* cacoshfN: (libc)Hyperbolic Functions.
* cacoshfNx: (libc)Hyperbolic Functions.
* cacoshl: (libc)Hyperbolic Functions.
* cacosl: (libc)Inverse Trig Functions.
* call_once: (libc)Call Once.
* calloc: (libc)Allocating Cleared Space.
* canonicalize: (libc)FP Bit Twiddling.
* canonicalize_file_name: (libc)Symbolic Links.
* canonicalizef: (libc)FP Bit Twiddling.
* canonicalizefN: (libc)FP Bit Twiddling.
* canonicalizefNx: (libc)FP Bit Twiddling.
* canonicalizel: (libc)FP Bit Twiddling.
* carg: (libc)Operations on Complex.
* cargf: (libc)Operations on Complex.
* cargfN: (libc)Operations on Complex.
* cargfNx: (libc)Operations on Complex.
* cargl: (libc)Operations on Complex.
* casin: (libc)Inverse Trig Functions.
* casinf: (libc)Inverse Trig Functions.
* casinfN: (libc)Inverse Trig Functions.
* casinfNx: (libc)Inverse Trig Functions.
* casinh: (libc)Hyperbolic Functions.
* casinhf: (libc)Hyperbolic Functions.
* casinhfN: (libc)Hyperbolic Functions.
* casinhfNx: (libc)Hyperbolic Functions.
* casinhl: (libc)Hyperbolic Functions.
* casinl: (libc)Inverse Trig Functions.
* catan: (libc)Inverse Trig Functions.
* catanf: (libc)Inverse Trig Functions.
* catanfN: (libc)Inverse Trig Functions.
* catanfNx: (libc)Inverse Trig Functions.
* catanh: (libc)Hyperbolic Functions.
* catanhf: (libc)Hyperbolic Functions.
* catanhfN: (libc)Hyperbolic Functions.
* catanhfNx: (libc)Hyperbolic Functions.
* catanhl: (libc)Hyperbolic Functions.
* catanl: (libc)Inverse Trig Functions.
* catclose: (libc)The catgets Functions.
* catgets: (libc)The catgets Functions.
* catopen: (libc)The catgets Functions.
* cbrt: (libc)Exponents and Logarithms.
* cbrtf: (libc)Exponents and Logarithms.
* cbrtfN: (libc)Exponents and Logarithms.
* cbrtfNx: (libc)Exponents and Logarithms.
* cbrtl: (libc)Exponents and Logarithms.
* ccos: (libc)Trig Functions.
* ccosf: (libc)Trig Functions.
* ccosfN: (libc)Trig Functions.
* ccosfNx: (libc)Trig Functions.
* ccosh: (libc)Hyperbolic Functions.
* ccoshf: (libc)Hyperbolic Functions.
* ccoshfN: (libc)Hyperbolic Functions.
* ccoshfNx: (libc)Hyperbolic Functions.
* ccoshl: (libc)Hyperbolic Functions.
* ccosl: (libc)Trig Functions.
* ceil: (libc)Rounding Functions.
* ceilf: (libc)Rounding Functions.
* ceilfN: (libc)Rounding Functions.
* ceilfNx: (libc)Rounding Functions.
* ceill: (libc)Rounding Functions.
* cexp: (libc)Exponents and Logarithms.
* cexpf: (libc)Exponents and Logarithms.
* cexpfN: (libc)Exponents and Logarithms.
* cexpfNx: (libc)Exponents and Logarithms.
* cexpl: (libc)Exponents and Logarithms.
* cfgetispeed: (libc)Line Speed.
* cfgetospeed: (libc)Line Speed.
* cfmakeraw: (libc)Noncanonical Input.
* cfsetispeed: (libc)Line Speed.
* cfsetospeed: (libc)Line Speed.
* cfsetspeed: (libc)Line Speed.
* chdir: (libc)Working Directory.
* chmod: (libc)Setting Permissions.
* chown: (libc)File Owner.
* cimag: (libc)Operations on Complex.
* cimagf: (libc)Operations on Complex.
* cimagfN: (libc)Operations on Complex.
* cimagfNx: (libc)Operations on Complex.
* cimagl: (libc)Operations on Complex.
* clearenv: (libc)Environment Access.
* clearerr: (libc)Error Recovery.
* clearerr_unlocked: (libc)Error Recovery.
* clock: (libc)CPU Time.
* clog10: (libc)Exponents and Logarithms.
* clog10f: (libc)Exponents and Logarithms.
* clog10fN: (libc)Exponents and Logarithms.
* clog10fNx: (libc)Exponents and Logarithms.
* clog10l: (libc)Exponents and Logarithms.
* clog: (libc)Exponents and Logarithms.
* clogf: (libc)Exponents and Logarithms.
* clogfN: (libc)Exponents and Logarithms.
* clogfNx: (libc)Exponents and Logarithms.
* clogl: (libc)Exponents and Logarithms.
* close: (libc)Opening and Closing Files.
* closedir: (libc)Reading/Closing Directory.
* closelog: (libc)closelog.
* cnd_broadcast: (libc)ISO C Condition Variables.
* cnd_destroy: (libc)ISO C Condition Variables.
* cnd_init: (libc)ISO C Condition Variables.
* cnd_signal: (libc)ISO C Condition Variables.
* cnd_timedwait: (libc)ISO C Condition Variables.
* cnd_wait: (libc)ISO C Condition Variables.
* confstr: (libc)String Parameters.
* conj: (libc)Operations on Complex.
* conjf: (libc)Operations on Complex.
* conjfN: (libc)Operations on Complex.
* conjfNx: (libc)Operations on Complex.
* conjl: (libc)Operations on Complex.
* connect: (libc)Connecting.
* copy_file_range: (libc)Copying File Data.
* copysign: (libc)FP Bit Twiddling.
* copysignf: (libc)FP Bit Twiddling.
* copysignfN: (libc)FP Bit Twiddling.
* copysignfNx: (libc)FP Bit Twiddling.
* copysignl: (libc)FP Bit Twiddling.
* cos: (libc)Trig Functions.
* cosf: (libc)Trig Functions.
* cosfN: (libc)Trig Functions.
* cosfNx: (libc)Trig Functions.
* cosh: (libc)Hyperbolic Functions.
* coshf: (libc)Hyperbolic Functions.
* coshfN: (libc)Hyperbolic Functions.
* coshfNx: (libc)Hyperbolic Functions.
* coshl: (libc)Hyperbolic Functions.
* cosl: (libc)Trig Functions.
* cpow: (libc)Exponents and Logarithms.
* cpowf: (libc)Exponents and Logarithms.
* cpowfN: (libc)Exponents and Logarithms.
* cpowfNx: (libc)Exponents and Logarithms.
* cpowl: (libc)Exponents and Logarithms.
* cproj: (libc)Operations on Complex.
* cprojf: (libc)Operations on Complex.
* cprojfN: (libc)Operations on Complex.
* cprojfNx: (libc)Operations on Complex.
* cprojl: (libc)Operations on Complex.
* creal: (libc)Operations on Complex.
* crealf: (libc)Operations on Complex.
* crealfN: (libc)Operations on Complex.
* crealfNx: (libc)Operations on Complex.
* creall: (libc)Operations on Complex.
* creat64: (libc)Opening and Closing Files.
* creat: (libc)Opening and Closing Files.
* crypt: (libc)Passphrase Storage.
* crypt_r: (libc)Passphrase Storage.
* csin: (libc)Trig Functions.
* csinf: (libc)Trig Functions.
* csinfN: (libc)Trig Functions.
* csinfNx: (libc)Trig Functions.
* csinh: (libc)Hyperbolic Functions.
* csinhf: (libc)Hyperbolic Functions.
* csinhfN: (libc)Hyperbolic Functions.
* csinhfNx: (libc)Hyperbolic Functions.
* csinhl: (libc)Hyperbolic Functions.
* csinl: (libc)Trig Functions.
* csqrt: (libc)Exponents and Logarithms.
* csqrtf: (libc)Exponents and Logarithms.
* csqrtfN: (libc)Exponents and Logarithms.
* csqrtfNx: (libc)Exponents and Logarithms.
* csqrtl: (libc)Exponents and Logarithms.
* ctan: (libc)Trig Functions.
* ctanf: (libc)Trig Functions.
* ctanfN: (libc)Trig Functions.
* ctanfNx: (libc)Trig Functions.
* ctanh: (libc)Hyperbolic Functions.
* ctanhf: (libc)Hyperbolic Functions.
* ctanhfN: (libc)Hyperbolic Functions.
* ctanhfNx: (libc)Hyperbolic Functions.
* ctanhl: (libc)Hyperbolic Functions.
* ctanl: (libc)Trig Functions.
* ctermid: (libc)Identifying the Terminal.
* ctime: (libc)Formatting Calendar Time.
* ctime_r: (libc)Formatting Calendar Time.
* cuserid: (libc)Who Logged In.
* daddl: (libc)Misc FP Arithmetic.
* dcgettext: (libc)Translation with gettext.
* dcngettext: (libc)Advanced gettext functions.
* ddivl: (libc)Misc FP Arithmetic.
* dgettext: (libc)Translation with gettext.
* difftime: (libc)Elapsed Time.
* dirfd: (libc)Opening a Directory.
* dirname: (libc)Finding Tokens in a String.
* div: (libc)Integer Division.
* dmull: (libc)Misc FP Arithmetic.
* dngettext: (libc)Advanced gettext functions.
* drand48: (libc)SVID Random.
* drand48_r: (libc)SVID Random.
* drem: (libc)Remainder Functions.
* dremf: (libc)Remainder Functions.
* dreml: (libc)Remainder Functions.
* dsubl: (libc)Misc FP Arithmetic.
* dup2: (libc)Duplicating Descriptors.
* dup: (libc)Duplicating Descriptors.
* ecvt: (libc)System V Number Conversion.
* ecvt_r: (libc)System V Number Conversion.
* endfsent: (libc)fstab.
* endgrent: (libc)Scanning All Groups.
* endhostent: (libc)Host Names.
* endmntent: (libc)mtab.
* endnetent: (libc)Networks Database.
* endnetgrent: (libc)Lookup Netgroup.
* endprotoent: (libc)Protocols Database.
* endpwent: (libc)Scanning All Users.
* endservent: (libc)Services Database.
* endutent: (libc)Manipulating the Database.
* endutxent: (libc)XPG Functions.
* envz_add: (libc)Envz Functions.
* envz_entry: (libc)Envz Functions.
* envz_get: (libc)Envz Functions.
* envz_merge: (libc)Envz Functions.
* envz_remove: (libc)Envz Functions.
* envz_strip: (libc)Envz Functions.
* erand48: (libc)SVID Random.
* erand48_r: (libc)SVID Random.
* erf: (libc)Special Functions.
* erfc: (libc)Special Functions.
* erfcf: (libc)Special Functions.
* erfcfN: (libc)Special Functions.
* erfcfNx: (libc)Special Functions.
* erfcl: (libc)Special Functions.
* erff: (libc)Special Functions.
* erffN: (libc)Special Functions.
* erffNx: (libc)Special Functions.
* erfl: (libc)Special Functions.
* err: (libc)Error Messages.
* errno: (libc)Checking for Errors.
* error: (libc)Error Messages.
* error_at_line: (libc)Error Messages.
* errx: (libc)Error Messages.
* execl: (libc)Executing a File.
* execle: (libc)Executing a File.
* execlp: (libc)Executing a File.
* execv: (libc)Executing a File.
* execve: (libc)Executing a File.
* execvp: (libc)Executing a File.
* exit: (libc)Normal Termination.
* exp10: (libc)Exponents and Logarithms.
* exp10f: (libc)Exponents and Logarithms.
* exp10fN: (libc)Exponents and Logarithms.
* exp10fNx: (libc)Exponents and Logarithms.
* exp10l: (libc)Exponents and Logarithms.
* exp2: (libc)Exponents and Logarithms.
* exp2f: (libc)Exponents and Logarithms.
* exp2fN: (libc)Exponents and Logarithms.
* exp2fNx: (libc)Exponents and Logarithms.
* exp2l: (libc)Exponents and Logarithms.
* exp: (libc)Exponents and Logarithms.
* expf: (libc)Exponents and Logarithms.
* expfN: (libc)Exponents and Logarithms.
* expfNx: (libc)Exponents and Logarithms.
* expl: (libc)Exponents and Logarithms.
* explicit_bzero: (libc)Erasing Sensitive Data.
* expm1: (libc)Exponents and Logarithms.
* expm1f: (libc)Exponents and Logarithms.
* expm1fN: (libc)Exponents and Logarithms.
* expm1fNx: (libc)Exponents and Logarithms.
* expm1l: (libc)Exponents and Logarithms.
* fMaddfN: (libc)Misc FP Arithmetic.
* fMaddfNx: (libc)Misc FP Arithmetic.
* fMdivfN: (libc)Misc FP Arithmetic.
* fMdivfNx: (libc)Misc FP Arithmetic.
* fMmulfN: (libc)Misc FP Arithmetic.
* fMmulfNx: (libc)Misc FP Arithmetic.
* fMsubfN: (libc)Misc FP Arithmetic.
* fMsubfNx: (libc)Misc FP Arithmetic.
* fMxaddfN: (libc)Misc FP Arithmetic.
* fMxaddfNx: (libc)Misc FP Arithmetic.
* fMxdivfN: (libc)Misc FP Arithmetic.
* fMxdivfNx: (libc)Misc FP Arithmetic.
* fMxmulfN: (libc)Misc FP Arithmetic.
* fMxmulfNx: (libc)Misc FP Arithmetic.
* fMxsubfN: (libc)Misc FP Arithmetic.
* fMxsubfNx: (libc)Misc FP Arithmetic.
* fabs: (libc)Absolute Value.
* fabsf: (libc)Absolute Value.
* fabsfN: (libc)Absolute Value.
* fabsfNx: (libc)Absolute Value.
* fabsl: (libc)Absolute Value.
* fadd: (libc)Misc FP Arithmetic.
* faddl: (libc)Misc FP Arithmetic.
* fchdir: (libc)Working Directory.
* fchmod: (libc)Setting Permissions.
* fchown: (libc)File Owner.
* fclose: (libc)Closing Streams.
* fcloseall: (libc)Closing Streams.
* fcntl: (libc)Control Operations.
* fcvt: (libc)System V Number Conversion.
* fcvt_r: (libc)System V Number Conversion.
* fdatasync: (libc)Synchronizing I/O.
* fdim: (libc)Misc FP Arithmetic.
* fdimf: (libc)Misc FP Arithmetic.
* fdimfN: (libc)Misc FP Arithmetic.
* fdimfNx: (libc)Misc FP Arithmetic.
* fdiml: (libc)Misc FP Arithmetic.
* fdiv: (libc)Misc FP Arithmetic.
* fdivl: (libc)Misc FP Arithmetic.
* fdopen: (libc)Descriptors and Streams.
* fdopendir: (libc)Opening a Directory.
* feclearexcept: (libc)Status bit operations.
* fedisableexcept: (libc)Control Functions.
* feenableexcept: (libc)Control Functions.
* fegetenv: (libc)Control Functions.
* fegetexcept: (libc)Control Functions.
* fegetexceptflag: (libc)Status bit operations.
* fegetmode: (libc)Control Functions.
* fegetround: (libc)Rounding.
* feholdexcept: (libc)Control Functions.
* feof: (libc)EOF and Errors.
* feof_unlocked: (libc)EOF and Errors.
* feraiseexcept: (libc)Status bit operations.
* ferror: (libc)EOF and Errors.
* ferror_unlocked: (libc)EOF and Errors.
* fesetenv: (libc)Control Functions.
* fesetexcept: (libc)Status bit operations.
* fesetexceptflag: (libc)Status bit operations.
* fesetmode: (libc)Control Functions.
* fesetround: (libc)Rounding.
* fetestexcept: (libc)Status bit operations.
* fetestexceptflag: (libc)Status bit operations.
* feupdateenv: (libc)Control Functions.
* fflush: (libc)Flushing Buffers.
* fflush_unlocked: (libc)Flushing Buffers.
* fgetc: (libc)Character Input.
* fgetc_unlocked: (libc)Character Input.
* fgetgrent: (libc)Scanning All Groups.
* fgetgrent_r: (libc)Scanning All Groups.
* fgetpos64: (libc)Portable Positioning.
* fgetpos: (libc)Portable Positioning.
* fgetpwent: (libc)Scanning All Users.
* fgetpwent_r: (libc)Scanning All Users.
* fgets: (libc)Line Input.
* fgets_unlocked: (libc)Line Input.
* fgetwc: (libc)Character Input.
* fgetwc_unlocked: (libc)Character Input.
* fgetws: (libc)Line Input.
* fgetws_unlocked: (libc)Line Input.
* fileno: (libc)Descriptors and Streams.
* fileno_unlocked: (libc)Descriptors and Streams.
* finite: (libc)Floating Point Classes.
* finitef: (libc)Floating Point Classes.
* finitel: (libc)Floating Point Classes.
* flockfile: (libc)Streams and Threads.
* floor: (libc)Rounding Functions.
* floorf: (libc)Rounding Functions.
* floorfN: (libc)Rounding Functions.
* floorfNx: (libc)Rounding Functions.
* floorl: (libc)Rounding Functions.
* fma: (libc)Misc FP Arithmetic.
* fmaf: (libc)Misc FP Arithmetic.
* fmafN: (libc)Misc FP Arithmetic.
* fmafNx: (libc)Misc FP Arithmetic.
* fmal: (libc)Misc FP Arithmetic.
* fmax: (libc)Misc FP Arithmetic.
* fmaxf: (libc)Misc FP Arithmetic.
* fmaxfN: (libc)Misc FP Arithmetic.
* fmaxfNx: (libc)Misc FP Arithmetic.
* fmaxl: (libc)Misc FP Arithmetic.
* fmaxmag: (libc)Misc FP Arithmetic.
* fmaxmagf: (libc)Misc FP Arithmetic.
* fmaxmagfN: (libc)Misc FP Arithmetic.
* fmaxmagfNx: (libc)Misc FP Arithmetic.
* fmaxmagl: (libc)Misc FP Arithmetic.
* fmemopen: (libc)String Streams.
* fmin: (libc)Misc FP Arithmetic.
* fminf: (libc)Misc FP Arithmetic.
* fminfN: (libc)Misc FP Arithmetic.
* fminfNx: (libc)Misc FP Arithmetic.
* fminl: (libc)Misc FP Arithmetic.
* fminmag: (libc)Misc FP Arithmetic.
* fminmagf: (libc)Misc FP Arithmetic.
* fminmagfN: (libc)Misc FP Arithmetic.
* fminmagfNx: (libc)Misc FP Arithmetic.
* fminmagl: (libc)Misc FP Arithmetic.
* fmod: (libc)Remainder Functions.
* fmodf: (libc)Remainder Functions.
* fmodfN: (libc)Remainder Functions.
* fmodfNx: (libc)Remainder Functions.
* fmodl: (libc)Remainder Functions.
* fmtmsg: (libc)Printing Formatted Messages.
* fmul: (libc)Misc FP Arithmetic.
* fmull: (libc)Misc FP Arithmetic.
* fnmatch: (libc)Wildcard Matching.
* fopen64: (libc)Opening Streams.
* fopen: (libc)Opening Streams.
* fopencookie: (libc)Streams and Cookies.
* fork: (libc)Creating a Process.
* forkpty: (libc)Pseudo-Terminal Pairs.
* fpathconf: (libc)Pathconf.
* fpclassify: (libc)Floating Point Classes.
* fprintf: (libc)Formatted Output Functions.
* fputc: (libc)Simple Output.
* fputc_unlocked: (libc)Simple Output.
* fputs: (libc)Simple Output.
* fputs_unlocked: (libc)Simple Output.
* fputwc: (libc)Simple Output.
* fputwc_unlocked: (libc)Simple Output.
* fputws: (libc)Simple Output.
* fputws_unlocked: (libc)Simple Output.
* fread: (libc)Block Input/Output.
* fread_unlocked: (libc)Block Input/Output.
* free: (libc)Freeing after Malloc.
* freopen64: (libc)Opening Streams.
* freopen: (libc)Opening Streams.
* frexp: (libc)Normalization Functions.
* frexpf: (libc)Normalization Functions.
* frexpfN: (libc)Normalization Functions.
* frexpfNx: (libc)Normalization Functions.
* frexpl: (libc)Normalization Functions.
* fromfp: (libc)Rounding Functions.
* fromfpf: (libc)Rounding Functions.
* fromfpfN: (libc)Rounding Functions.
* fromfpfNx: (libc)Rounding Functions.
* fromfpl: (libc)Rounding Functions.
* fromfpx: (libc)Rounding Functions.
* fromfpxf: (libc)Rounding Functions.
* fromfpxfN: (libc)Rounding Functions.
* fromfpxfNx: (libc)Rounding Functions.
* fromfpxl: (libc)Rounding Functions.
* fscanf: (libc)Formatted Input Functions.
* fseek: (libc)File Positioning.
* fseeko64: (libc)File Positioning.
* fseeko: (libc)File Positioning.
* fsetpos64: (libc)Portable Positioning.
* fsetpos: (libc)Portable Positioning.
* fstat64: (libc)Reading Attributes.
* fstat: (libc)Reading Attributes.
* fsub: (libc)Misc FP Arithmetic.
* fsubl: (libc)Misc FP Arithmetic.
* fsync: (libc)Synchronizing I/O.
* ftell: (libc)File Positioning.
* ftello64: (libc)File Positioning.
* ftello: (libc)File Positioning.
* ftruncate64: (libc)File Size.
* ftruncate: (libc)File Size.
* ftrylockfile: (libc)Streams and Threads.
* ftw64: (libc)Working with Directory Trees.
* ftw: (libc)Working with Directory Trees.
* funlockfile: (libc)Streams and Threads.
* futimes: (libc)File Times.
* fwide: (libc)Streams and I18N.
* fwprintf: (libc)Formatted Output Functions.
* fwrite: (libc)Block Input/Output.
* fwrite_unlocked: (libc)Block Input/Output.
* fwscanf: (libc)Formatted Input Functions.
* gamma: (libc)Special Functions.
* gammaf: (libc)Special Functions.
* gammal: (libc)Special Functions.
* gcvt: (libc)System V Number Conversion.
* get_avphys_pages: (libc)Query Memory Parameters.
* get_current_dir_name: (libc)Working Directory.
* get_nprocs: (libc)Processor Resources.
* get_nprocs_conf: (libc)Processor Resources.
* get_phys_pages: (libc)Query Memory Parameters.
* getauxval: (libc)Auxiliary Vector.
* getc: (libc)Character Input.
* getc_unlocked: (libc)Character Input.
* getchar: (libc)Character Input.
* getchar_unlocked: (libc)Character Input.
* getcontext: (libc)System V contexts.
* getcpu: (libc)CPU Affinity.
* getcwd: (libc)Working Directory.
* getdate: (libc)General Time String Parsing.
* getdate_r: (libc)General Time String Parsing.
* getdelim: (libc)Line Input.
* getdomainnname: (libc)Host Identification.
* getegid: (libc)Reading Persona.
* getentropy: (libc)Unpredictable Bytes.
* getenv: (libc)Environment Access.
* geteuid: (libc)Reading Persona.
* getfsent: (libc)fstab.
* getfsfile: (libc)fstab.
* getfsspec: (libc)fstab.
* getgid: (libc)Reading Persona.
* getgrent: (libc)Scanning All Groups.
* getgrent_r: (libc)Scanning All Groups.
* getgrgid: (libc)Lookup Group.
* getgrgid_r: (libc)Lookup Group.
* getgrnam: (libc)Lookup Group.
* getgrnam_r: (libc)Lookup Group.
* getgrouplist: (libc)Setting Groups.
* getgroups: (libc)Reading Persona.
* gethostbyaddr: (libc)Host Names.
* gethostbyaddr_r: (libc)Host Names.
* gethostbyname2: (libc)Host Names.
* gethostbyname2_r: (libc)Host Names.
* gethostbyname: (libc)Host Names.
* gethostbyname_r: (libc)Host Names.
* gethostent: (libc)Host Names.
* gethostid: (libc)Host Identification.
* gethostname: (libc)Host Identification.
* getitimer: (libc)Setting an Alarm.
* getline: (libc)Line Input.
* getloadavg: (libc)Processor Resources.
* getlogin: (libc)Who Logged In.
* getmntent: (libc)mtab.
* getmntent_r: (libc)mtab.
* getnetbyaddr: (libc)Networks Database.
* getnetbyname: (libc)Networks Database.
* getnetent: (libc)Networks Database.
* getnetgrent: (libc)Lookup Netgroup.
* getnetgrent_r: (libc)Lookup Netgroup.
* getopt: (libc)Using Getopt.
* getopt_long: (libc)Getopt Long Options.
* getopt_long_only: (libc)Getopt Long Options.
* getpagesize: (libc)Query Memory Parameters.
* getpass: (libc)getpass.
* getpayload: (libc)FP Bit Twiddling.
* getpayloadf: (libc)FP Bit Twiddling.
* getpayloadfN: (libc)FP Bit Twiddling.
* getpayloadfNx: (libc)FP Bit Twiddling.
* getpayloadl: (libc)FP Bit Twiddling.
* getpeername: (libc)Who is Connected.
* getpgid: (libc)Process Group Functions.
* getpgrp: (libc)Process Group Functions.
* getpid: (libc)Process Identification.
* getppid: (libc)Process Identification.
* getpriority: (libc)Traditional Scheduling Functions.
* getprotobyname: (libc)Protocols Database.
* getprotobynumber: (libc)Protocols Database.
* getprotoent: (libc)Protocols Database.
* getpt: (libc)Allocation.
* getpwent: (libc)Scanning All Users.
* getpwent_r: (libc)Scanning All Users.
* getpwnam: (libc)Lookup User.
* getpwnam_r: (libc)Lookup User.
* getpwuid: (libc)Lookup User.
* getpwuid_r: (libc)Lookup User.
* getrandom: (libc)Unpredictable Bytes.
* getrlimit64: (libc)Limits on Resources.
* getrlimit: (libc)Limits on Resources.
* getrusage: (libc)Resource Usage.
* gets: (libc)Line Input.
* getservbyname: (libc)Services Database.
* getservbyport: (libc)Services Database.
* getservent: (libc)Services Database.
* getsid: (libc)Process Group Functions.
* getsockname: (libc)Reading Address.
* getsockopt: (libc)Socket Option Functions.
* getsubopt: (libc)Suboptions.
* gettext: (libc)Translation with gettext.
* gettimeofday: (libc)High-Resolution Calendar.
* getuid: (libc)Reading Persona.
* getumask: (libc)Setting Permissions.
* getutent: (libc)Manipulating the Database.
* getutent_r: (libc)Manipulating the Database.
* getutid: (libc)Manipulating the Database.
* getutid_r: (libc)Manipulating the Database.
* getutline: (libc)Manipulating the Database.
* getutline_r: (libc)Manipulating the Database.
* getutmp: (libc)XPG Functions.
* getutmpx: (libc)XPG Functions.
* getutxent: (libc)XPG Functions.
* getutxid: (libc)XPG Functions.
* getutxline: (libc)XPG Functions.
* getw: (libc)Character Input.
* getwc: (libc)Character Input.
* getwc_unlocked: (libc)Character Input.
* getwchar: (libc)Character Input.
* getwchar_unlocked: (libc)Character Input.
* getwd: (libc)Working Directory.
* glob64: (libc)Calling Glob.
* glob: (libc)Calling Glob.
* globfree64: (libc)More Flags for Globbing.
* globfree: (libc)More Flags for Globbing.
* gmtime: (libc)Broken-down Time.
* gmtime_r: (libc)Broken-down Time.
* grantpt: (libc)Allocation.
* gsignal: (libc)Signaling Yourself.
* gtty: (libc)BSD Terminal Modes.
* hasmntopt: (libc)mtab.
* hcreate: (libc)Hash Search Function.
* hcreate_r: (libc)Hash Search Function.
* hdestroy: (libc)Hash Search Function.
* hdestroy_r: (libc)Hash Search Function.
* hsearch: (libc)Hash Search Function.
* hsearch_r: (libc)Hash Search Function.
* htonl: (libc)Byte Order.
* htons: (libc)Byte Order.
* hypot: (libc)Exponents and Logarithms.
* hypotf: (libc)Exponents and Logarithms.
* hypotfN: (libc)Exponents and Logarithms.
* hypotfNx: (libc)Exponents and Logarithms.
* hypotl: (libc)Exponents and Logarithms.
* iconv: (libc)Generic Conversion Interface.
* iconv_close: (libc)Generic Conversion Interface.
* iconv_open: (libc)Generic Conversion Interface.
* if_freenameindex: (libc)Interface Naming.
* if_indextoname: (libc)Interface Naming.
* if_nameindex: (libc)Interface Naming.
* if_nametoindex: (libc)Interface Naming.
* ilogb: (libc)Exponents and Logarithms.
* ilogbf: (libc)Exponents and Logarithms.
* ilogbfN: (libc)Exponents and Logarithms.
* ilogbfNx: (libc)Exponents and Logarithms.
* ilogbl: (libc)Exponents and Logarithms.
* imaxabs: (libc)Absolute Value.
* imaxdiv: (libc)Integer Division.
* in6addr_any: (libc)Host Address Data Type.
* in6addr_loopback: (libc)Host Address Data Type.
* index: (libc)Search Functions.
* inet_addr: (libc)Host Address Functions.
* inet_aton: (libc)Host Address Functions.
* inet_lnaof: (libc)Host Address Functions.
* inet_makeaddr: (libc)Host Address Functions.
* inet_netof: (libc)Host Address Functions.
* inet_network: (libc)Host Address Functions.
* inet_ntoa: (libc)Host Address Functions.
* inet_ntop: (libc)Host Address Functions.
* inet_pton: (libc)Host Address Functions.
* initgroups: (libc)Setting Groups.
* initstate: (libc)BSD Random.
* initstate_r: (libc)BSD Random.
* innetgr: (libc)Netgroup Membership.
* ioctl: (libc)IOCTLs.
* isalnum: (libc)Classification of Characters.
* isalpha: (libc)Classification of Characters.
* isascii: (libc)Classification of Characters.
* isatty: (libc)Is It a Terminal.
* isblank: (libc)Classification of Characters.
* iscanonical: (libc)Floating Point Classes.
* iscntrl: (libc)Classification of Characters.
* isdigit: (libc)Classification of Characters.
* iseqsig: (libc)FP Comparison Functions.
* isfinite: (libc)Floating Point Classes.
* isgraph: (libc)Classification of Characters.
* isgreater: (libc)FP Comparison Functions.
* isgreaterequal: (libc)FP Comparison Functions.
* isinf: (libc)Floating Point Classes.
* isinff: (libc)Floating Point Classes.
* isinfl: (libc)Floating Point Classes.
* isless: (libc)FP Comparison Functions.
* islessequal: (libc)FP Comparison Functions.
* islessgreater: (libc)FP Comparison Functions.
* islower: (libc)Classification of Characters.
* isnan: (libc)Floating Point Classes.
* isnan: (libc)Floating Point Classes.
* isnanf: (libc)Floating Point Classes.
* isnanl: (libc)Floating Point Classes.
* isnormal: (libc)Floating Point Classes.
* isprint: (libc)Classification of Characters.
* ispunct: (libc)Classification of Characters.
* issignaling: (libc)Floating Point Classes.
* isspace: (libc)Classification of Characters.
* issubnormal: (libc)Floating Point Classes.
* isunordered: (libc)FP Comparison Functions.
* isupper: (libc)Classification of Characters.
* iswalnum: (libc)Classification of Wide Characters.
* iswalpha: (libc)Classification of Wide Characters.
* iswblank: (libc)Classification of Wide Characters.
* iswcntrl: (libc)Classification of Wide Characters.
* iswctype: (libc)Classification of Wide Characters.
* iswdigit: (libc)Classification of Wide Characters.
* iswgraph: (libc)Classification of Wide Characters.
* iswlower: (libc)Classification of Wide Characters.
* iswprint: (libc)Classification of Wide Characters.
* iswpunct: (libc)Classification of Wide Characters.
* iswspace: (libc)Classification of Wide Characters.
* iswupper: (libc)Classification of Wide Characters.
* iswxdigit: (libc)Classification of Wide Characters.
* isxdigit: (libc)Classification of Characters.
* iszero: (libc)Floating Point Classes.
* j0: (libc)Special Functions.
* j0f: (libc)Special Functions.
* j0fN: (libc)Special Functions.
* j0fNx: (libc)Special Functions.
* j0l: (libc)Special Functions.
* j1: (libc)Special Functions.
* j1f: (libc)Special Functions.
* j1fN: (libc)Special Functions.
* j1fNx: (libc)Special Functions.
* j1l: (libc)Special Functions.
* jn: (libc)Special Functions.
* jnf: (libc)Special Functions.
* jnfN: (libc)Special Functions.
* jnfNx: (libc)Special Functions.
* jnl: (libc)Special Functions.
* jrand48: (libc)SVID Random.
* jrand48_r: (libc)SVID Random.
* kill: (libc)Signaling Another Process.
* killpg: (libc)Signaling Another Process.
* l64a: (libc)Encode Binary Data.
* labs: (libc)Absolute Value.
* lcong48: (libc)SVID Random.
* lcong48_r: (libc)SVID Random.
* ldexp: (libc)Normalization Functions.
* ldexpf: (libc)Normalization Functions.
* ldexpfN: (libc)Normalization Functions.
* ldexpfNx: (libc)Normalization Functions.
* ldexpl: (libc)Normalization Functions.
* ldiv: (libc)Integer Division.
* lfind: (libc)Array Search Function.
* lgamma: (libc)Special Functions.
* lgamma_r: (libc)Special Functions.
* lgammaf: (libc)Special Functions.
* lgammafN: (libc)Special Functions.
* lgammafN_r: (libc)Special Functions.
* lgammafNx: (libc)Special Functions.
* lgammafNx_r: (libc)Special Functions.
* lgammaf_r: (libc)Special Functions.
* lgammal: (libc)Special Functions.
* lgammal_r: (libc)Special Functions.
* link: (libc)Hard Links.
* linkat: (libc)Hard Links.
* lio_listio64: (libc)Asynchronous Reads/Writes.
* lio_listio: (libc)Asynchronous Reads/Writes.
* listen: (libc)Listening.
* llabs: (libc)Absolute Value.
* lldiv: (libc)Integer Division.
* llogb: (libc)Exponents and Logarithms.
* llogbf: (libc)Exponents and Logarithms.
* llogbfN: (libc)Exponents and Logarithms.
* llogbfNx: (libc)Exponents and Logarithms.
* llogbl: (libc)Exponents and Logarithms.
* llrint: (libc)Rounding Functions.
* llrintf: (libc)Rounding Functions.
* llrintfN: (libc)Rounding Functions.
* llrintfNx: (libc)Rounding Functions.
* llrintl: (libc)Rounding Functions.
* llround: (libc)Rounding Functions.
* llroundf: (libc)Rounding Functions.
* llroundfN: (libc)Rounding Functions.
* llroundfNx: (libc)Rounding Functions.
* llroundl: (libc)Rounding Functions.
* localeconv: (libc)The Lame Way to Locale Data.
* localtime: (libc)Broken-down Time.
* localtime_r: (libc)Broken-down Time.
* log10: (libc)Exponents and Logarithms.
* log10f: (libc)Exponents and Logarithms.
* log10fN: (libc)Exponents and Logarithms.
* log10fNx: (libc)Exponents and Logarithms.
* log10l: (libc)Exponents and Logarithms.
* log1p: (libc)Exponents and Logarithms.
* log1pf: (libc)Exponents and Logarithms.
* log1pfN: (libc)Exponents and Logarithms.
* log1pfNx: (libc)Exponents and Logarithms.
* log1pl: (libc)Exponents and Logarithms.
* log2: (libc)Exponents and Logarithms.
* log2f: (libc)Exponents and Logarithms.
* log2fN: (libc)Exponents and Logarithms.
* log2fNx: (libc)Exponents and Logarithms.
* log2l: (libc)Exponents and Logarithms.
* log: (libc)Exponents and Logarithms.
* logb: (libc)Exponents and Logarithms.
* logbf: (libc)Exponents and Logarithms.
* logbfN: (libc)Exponents and Logarithms.
* logbfNx: (libc)Exponents and Logarithms.
* logbl: (libc)Exponents and Logarithms.
* logf: (libc)Exponents and Logarithms.
* logfN: (libc)Exponents and Logarithms.
* logfNx: (libc)Exponents and Logarithms.
* login: (libc)Logging In and Out.
* login_tty: (libc)Logging In and Out.
* logl: (libc)Exponents and Logarithms.
* logout: (libc)Logging In and Out.
* logwtmp: (libc)Logging In and Out.
* longjmp: (libc)Non-Local Details.
* lrand48: (libc)SVID Random.
* lrand48_r: (libc)SVID Random.
* lrint: (libc)Rounding Functions.
* lrintf: (libc)Rounding Functions.
* lrintfN: (libc)Rounding Functions.
* lrintfNx: (libc)Rounding Functions.
* lrintl: (libc)Rounding Functions.
* lround: (libc)Rounding Functions.
* lroundf: (libc)Rounding Functions.
* lroundfN: (libc)Rounding Functions.
* lroundfNx: (libc)Rounding Functions.
* lroundl: (libc)Rounding Functions.
* lsearch: (libc)Array Search Function.
* lseek64: (libc)File Position Primitive.
* lseek: (libc)File Position Primitive.
* lstat64: (libc)Reading Attributes.
* lstat: (libc)Reading Attributes.
* lutimes: (libc)File Times.
* madvise: (libc)Memory-mapped I/O.
* makecontext: (libc)System V contexts.
* mallinfo: (libc)Statistics of Malloc.
* malloc: (libc)Basic Allocation.
* mallopt: (libc)Malloc Tunable Parameters.
* mblen: (libc)Non-reentrant Character Conversion.
* mbrlen: (libc)Converting a Character.
* mbrtowc: (libc)Converting a Character.
* mbsinit: (libc)Keeping the state.
* mbsnrtowcs: (libc)Converting Strings.
* mbsrtowcs: (libc)Converting Strings.
* mbstowcs: (libc)Non-reentrant String Conversion.
* mbtowc: (libc)Non-reentrant Character Conversion.
* mcheck: (libc)Heap Consistency Checking.
* memalign: (libc)Aligned Memory Blocks.
* memccpy: (libc)Copying Strings and Arrays.
* memchr: (libc)Search Functions.
* memcmp: (libc)String/Array Comparison.
* memcpy: (libc)Copying Strings and Arrays.
* memfd_create: (libc)Memory-mapped I/O.
* memfrob: (libc)Obfuscating Data.
* memmem: (libc)Search Functions.
* memmove: (libc)Copying Strings and Arrays.
* mempcpy: (libc)Copying Strings and Arrays.
* memrchr: (libc)Search Functions.
* memset: (libc)Copying Strings and Arrays.
* mkdir: (libc)Creating Directories.
* mkdtemp: (libc)Temporary Files.
* mkfifo: (libc)FIFO Special Files.
* mknod: (libc)Making Special Files.
* mkstemp: (libc)Temporary Files.
* mktemp: (libc)Temporary Files.
* mktime: (libc)Broken-down Time.
* mlock2: (libc)Page Lock Functions.
* mlock: (libc)Page Lock Functions.
* mlockall: (libc)Page Lock Functions.
* mmap64: (libc)Memory-mapped I/O.
* mmap: (libc)Memory-mapped I/O.
* modf: (libc)Rounding Functions.
* modff: (libc)Rounding Functions.
* modffN: (libc)Rounding Functions.
* modffNx: (libc)Rounding Functions.
* modfl: (libc)Rounding Functions.
* mount: (libc)Mount-Unmount-Remount.
* mprobe: (libc)Heap Consistency Checking.
* mprotect: (libc)Memory Protection.
* mrand48: (libc)SVID Random.
* mrand48_r: (libc)SVID Random.
* mremap: (libc)Memory-mapped I/O.
* msync: (libc)Memory-mapped I/O.
* mtrace: (libc)Tracing malloc.
* mtx_destroy: (libc)ISO C Mutexes.
* mtx_init: (libc)ISO C Mutexes.
* mtx_lock: (libc)ISO C Mutexes.
* mtx_timedlock: (libc)ISO C Mutexes.
* mtx_trylock: (libc)ISO C Mutexes.
* mtx_unlock: (libc)ISO C Mutexes.
* munlock: (libc)Page Lock Functions.
* munlockall: (libc)Page Lock Functions.
* munmap: (libc)Memory-mapped I/O.
* muntrace: (libc)Tracing malloc.
* nan: (libc)FP Bit Twiddling.
* nanf: (libc)FP Bit Twiddling.
* nanfN: (libc)FP Bit Twiddling.
* nanfNx: (libc)FP Bit Twiddling.
* nanl: (libc)FP Bit Twiddling.
* nanosleep: (libc)Sleeping.
* nearbyint: (libc)Rounding Functions.
* nearbyintf: (libc)Rounding Functions.
* nearbyintfN: (libc)Rounding Functions.
* nearbyintfNx: (libc)Rounding Functions.
* nearbyintl: (libc)Rounding Functions.
* nextafter: (libc)FP Bit Twiddling.
* nextafterf: (libc)FP Bit Twiddling.
* nextafterfN: (libc)FP Bit Twiddling.
* nextafterfNx: (libc)FP Bit Twiddling.
* nextafterl: (libc)FP Bit Twiddling.
* nextdown: (libc)FP Bit Twiddling.
* nextdownf: (libc)FP Bit Twiddling.
* nextdownfN: (libc)FP Bit Twiddling.
* nextdownfNx: (libc)FP Bit Twiddling.
* nextdownl: (libc)FP Bit Twiddling.
* nexttoward: (libc)FP Bit Twiddling.
* nexttowardf: (libc)FP Bit Twiddling.
* nexttowardl: (libc)FP Bit Twiddling.
* nextup: (libc)FP Bit Twiddling.
* nextupf: (libc)FP Bit Twiddling.
* nextupfN: (libc)FP Bit Twiddling.
* nextupfNx: (libc)FP Bit Twiddling.
* nextupl: (libc)FP Bit Twiddling.
* nftw64: (libc)Working with Directory Trees.
* nftw: (libc)Working with Directory Trees.
* ngettext: (libc)Advanced gettext functions.
* nice: (libc)Traditional Scheduling Functions.
* nl_langinfo: (libc)The Elegant and Fast Way.
* nrand48: (libc)SVID Random.
* nrand48_r: (libc)SVID Random.
* ntohl: (libc)Byte Order.
* ntohs: (libc)Byte Order.
* ntp_adjtime: (libc)High Accuracy Clock.
* ntp_gettime: (libc)High Accuracy Clock.
* obstack_1grow: (libc)Growing Objects.
* obstack_1grow_fast: (libc)Extra Fast Growing.
* obstack_alignment_mask: (libc)Obstacks Data Alignment.
* obstack_alloc: (libc)Allocation in an Obstack.
* obstack_base: (libc)Status of an Obstack.
* obstack_blank: (libc)Growing Objects.
* obstack_blank_fast: (libc)Extra Fast Growing.
* obstack_chunk_size: (libc)Obstack Chunks.
* obstack_copy0: (libc)Allocation in an Obstack.
* obstack_copy: (libc)Allocation in an Obstack.
* obstack_finish: (libc)Growing Objects.
* obstack_free: (libc)Freeing Obstack Objects.
* obstack_grow0: (libc)Growing Objects.
* obstack_grow: (libc)Growing Objects.
* obstack_init: (libc)Preparing for Obstacks.
* obstack_int_grow: (libc)Growing Objects.
* obstack_int_grow_fast: (libc)Extra Fast Growing.
* obstack_next_free: (libc)Status of an Obstack.
* obstack_object_size: (libc)Growing Objects.
* obstack_object_size: (libc)Status of an Obstack.
* obstack_printf: (libc)Dynamic Output.
* obstack_ptr_grow: (libc)Growing Objects.
* obstack_ptr_grow_fast: (libc)Extra Fast Growing.
* obstack_room: (libc)Extra Fast Growing.
* obstack_vprintf: (libc)Variable Arguments Output.
* offsetof: (libc)Structure Measurement.
* on_exit: (libc)Cleanups on Exit.
* open64: (libc)Opening and Closing Files.
* open: (libc)Opening and Closing Files.
* open_memstream: (libc)String Streams.
* opendir: (libc)Opening a Directory.
* openlog: (libc)openlog.
* openpty: (libc)Pseudo-Terminal Pairs.
* parse_printf_format: (libc)Parsing a Template String.
* pathconf: (libc)Pathconf.
* pause: (libc)Using Pause.
* pclose: (libc)Pipe to a Subprocess.
* perror: (libc)Error Messages.
* pipe: (libc)Creating a Pipe.
* pkey_alloc: (libc)Memory Protection.
* pkey_free: (libc)Memory Protection.
* pkey_get: (libc)Memory Protection.
* pkey_mprotect: (libc)Memory Protection.
* pkey_set: (libc)Memory Protection.
* popen: (libc)Pipe to a Subprocess.
* posix_fallocate64: (libc)Storage Allocation.
* posix_fallocate: (libc)Storage Allocation.
* posix_memalign: (libc)Aligned Memory Blocks.
* pow: (libc)Exponents and Logarithms.
* powf: (libc)Exponents and Logarithms.
* powfN: (libc)Exponents and Logarithms.
* powfNx: (libc)Exponents and Logarithms.
* powl: (libc)Exponents and Logarithms.
* pread64: (libc)I/O Primitives.
* pread: (libc)I/O Primitives.
* preadv2: (libc)Scatter-Gather.
* preadv64: (libc)Scatter-Gather.
* preadv64v2: (libc)Scatter-Gather.
* preadv: (libc)Scatter-Gather.
* printf: (libc)Formatted Output Functions.
* printf_size: (libc)Predefined Printf Handlers.
* printf_size_info: (libc)Predefined Printf Handlers.
* psignal: (libc)Signal Messages.
* pthread_getattr_default_np: (libc)Default Thread Attributes.
* pthread_getspecific: (libc)Thread-specific Data.
* pthread_key_create: (libc)Thread-specific Data.
* pthread_key_delete: (libc)Thread-specific Data.
* pthread_setattr_default_np: (libc)Default Thread Attributes.
* pthread_setspecific: (libc)Thread-specific Data.
* ptsname: (libc)Allocation.
* ptsname_r: (libc)Allocation.
* putc: (libc)Simple Output.
* putc_unlocked: (libc)Simple Output.
* putchar: (libc)Simple Output.
* putchar_unlocked: (libc)Simple Output.
* putenv: (libc)Environment Access.
* putpwent: (libc)Writing a User Entry.
* puts: (libc)Simple Output.
* pututline: (libc)Manipulating the Database.
* pututxline: (libc)XPG Functions.
* putw: (libc)Simple Output.
* putwc: (libc)Simple Output.
* putwc_unlocked: (libc)Simple Output.
* putwchar: (libc)Simple Output.
* putwchar_unlocked: (libc)Simple Output.
* pwrite64: (libc)I/O Primitives.
* pwrite: (libc)I/O Primitives.
* pwritev2: (libc)Scatter-Gather.
* pwritev64: (libc)Scatter-Gather.
* pwritev64v2: (libc)Scatter-Gather.
* pwritev: (libc)Scatter-Gather.
* qecvt: (libc)System V Number Conversion.
* qecvt_r: (libc)System V Number Conversion.
* qfcvt: (libc)System V Number Conversion.
* qfcvt_r: (libc)System V Number Conversion.
* qgcvt: (libc)System V Number Conversion.
* qsort: (libc)Array Sort Function.
* raise: (libc)Signaling Yourself.
* rand: (libc)ISO Random.
* rand_r: (libc)ISO Random.
* random: (libc)BSD Random.
* random_r: (libc)BSD Random.
* rawmemchr: (libc)Search Functions.
* read: (libc)I/O Primitives.
* readdir64: (libc)Reading/Closing Directory.
* readdir64_r: (libc)Reading/Closing Directory.
* readdir: (libc)Reading/Closing Directory.
* readdir_r: (libc)Reading/Closing Directory.
* readlink: (libc)Symbolic Links.
* readv: (libc)Scatter-Gather.
* realloc: (libc)Changing Block Size.
* reallocarray: (libc)Changing Block Size.
* realpath: (libc)Symbolic Links.
* recv: (libc)Receiving Data.
* recvfrom: (libc)Receiving Datagrams.
* recvmsg: (libc)Receiving Datagrams.
* regcomp: (libc)POSIX Regexp Compilation.
* regerror: (libc)Regexp Cleanup.
* regexec: (libc)Matching POSIX Regexps.
* regfree: (libc)Regexp Cleanup.
* register_printf_function: (libc)Registering New Conversions.
* remainder: (libc)Remainder Functions.
* remainderf: (libc)Remainder Functions.
* remainderfN: (libc)Remainder Functions.
* remainderfNx: (libc)Remainder Functions.
* remainderl: (libc)Remainder Functions.
* remove: (libc)Deleting Files.
* rename: (libc)Renaming Files.
* rewind: (libc)File Positioning.
* rewinddir: (libc)Random Access Directory.
* rindex: (libc)Search Functions.
* rint: (libc)Rounding Functions.
* rintf: (libc)Rounding Functions.
* rintfN: (libc)Rounding Functions.
* rintfNx: (libc)Rounding Functions.
* rintl: (libc)Rounding Functions.
* rmdir: (libc)Deleting Files.
* round: (libc)Rounding Functions.
* roundeven: (libc)Rounding Functions.
* roundevenf: (libc)Rounding Functions.
* roundevenfN: (libc)Rounding Functions.
* roundevenfNx: (libc)Rounding Functions.
* roundevenl: (libc)Rounding Functions.
* roundf: (libc)Rounding Functions.
* roundfN: (libc)Rounding Functions.
* roundfNx: (libc)Rounding Functions.
* roundl: (libc)Rounding Functions.
* rpmatch: (libc)Yes-or-No Questions.
* sbrk: (libc)Resizing the Data Segment.
* scalb: (libc)Normalization Functions.
* scalbf: (libc)Normalization Functions.
* scalbl: (libc)Normalization Functions.
* scalbln: (libc)Normalization Functions.
* scalblnf: (libc)Normalization Functions.
* scalblnfN: (libc)Normalization Functions.
* scalblnfNx: (libc)Normalization Functions.
* scalblnl: (libc)Normalization Functions.
* scalbn: (libc)Normalization Functions.
* scalbnf: (libc)Normalization Functions.
* scalbnfN: (libc)Normalization Functions.
* scalbnfNx: (libc)Normalization Functions.
* scalbnl: (libc)Normalization Functions.
* scandir64: (libc)Scanning Directory Content.
* scandir: (libc)Scanning Directory Content.
* scanf: (libc)Formatted Input Functions.
* sched_get_priority_max: (libc)Basic Scheduling Functions.
* sched_get_priority_min: (libc)Basic Scheduling Functions.
* sched_getaffinity: (libc)CPU Affinity.
* sched_getparam: (libc)Basic Scheduling Functions.
* sched_getscheduler: (libc)Basic Scheduling Functions.
* sched_rr_get_interval: (libc)Basic Scheduling Functions.
* sched_setaffinity: (libc)CPU Affinity.
* sched_setparam: (libc)Basic Scheduling Functions.
* sched_setscheduler: (libc)Basic Scheduling Functions.
* sched_yield: (libc)Basic Scheduling Functions.
* secure_getenv: (libc)Environment Access.
* seed48: (libc)SVID Random.
* seed48_r: (libc)SVID Random.
* seekdir: (libc)Random Access Directory.
* select: (libc)Waiting for I/O.
* sem_close: (libc)Semaphores.
* sem_destroy: (libc)Semaphores.
* sem_getvalue: (libc)Semaphores.
* sem_init: (libc)Semaphores.
* sem_open: (libc)Semaphores.
* sem_post: (libc)Semaphores.
* sem_timedwait: (libc)Semaphores.
* sem_trywait: (libc)Semaphores.
* sem_unlink: (libc)Semaphores.
* sem_wait: (libc)Semaphores.
* semctl: (libc)Semaphores.
* semget: (libc)Semaphores.
* semop: (libc)Semaphores.
* semtimedop: (libc)Semaphores.
* send: (libc)Sending Data.
* sendmsg: (libc)Receiving Datagrams.
* sendto: (libc)Sending Datagrams.
* setbuf: (libc)Controlling Buffering.
* setbuffer: (libc)Controlling Buffering.
* setcontext: (libc)System V contexts.
* setdomainname: (libc)Host Identification.
* setegid: (libc)Setting Groups.
* setenv: (libc)Environment Access.
* seteuid: (libc)Setting User ID.
* setfsent: (libc)fstab.
* setgid: (libc)Setting Groups.
* setgrent: (libc)Scanning All Groups.
* setgroups: (libc)Setting Groups.
* sethostent: (libc)Host Names.
* sethostid: (libc)Host Identification.
* sethostname: (libc)Host Identification.
* setitimer: (libc)Setting an Alarm.
* setjmp: (libc)Non-Local Details.
* setlinebuf: (libc)Controlling Buffering.
* setlocale: (libc)Setting the Locale.
* setlogmask: (libc)setlogmask.
* setmntent: (libc)mtab.
* setnetent: (libc)Networks Database.
* setnetgrent: (libc)Lookup Netgroup.
* setpayload: (libc)FP Bit Twiddling.
* setpayloadf: (libc)FP Bit Twiddling.
* setpayloadfN: (libc)FP Bit Twiddling.
* setpayloadfNx: (libc)FP Bit Twiddling.
* setpayloadl: (libc)FP Bit Twiddling.
* setpayloadsig: (libc)FP Bit Twiddling.
* setpayloadsigf: (libc)FP Bit Twiddling.
* setpayloadsigfN: (libc)FP Bit Twiddling.
* setpayloadsigfNx: (libc)FP Bit Twiddling.
* setpayloadsigl: (libc)FP Bit Twiddling.
* setpgid: (libc)Process Group Functions.
* setpgrp: (libc)Process Group Functions.
* setpriority: (libc)Traditional Scheduling Functions.
* setprotoent: (libc)Protocols Database.
* setpwent: (libc)Scanning All Users.
* setregid: (libc)Setting Groups.
* setreuid: (libc)Setting User ID.
* setrlimit64: (libc)Limits on Resources.
* setrlimit: (libc)Limits on Resources.
* setservent: (libc)Services Database.
* setsid: (libc)Process Group Functions.
* setsockopt: (libc)Socket Option Functions.
* setstate: (libc)BSD Random.
* setstate_r: (libc)BSD Random.
* settimeofday: (libc)High-Resolution Calendar.
* setuid: (libc)Setting User ID.
* setutent: (libc)Manipulating the Database.
* setutxent: (libc)XPG Functions.
* setvbuf: (libc)Controlling Buffering.
* shm_open: (libc)Memory-mapped I/O.
* shm_unlink: (libc)Memory-mapped I/O.
* shutdown: (libc)Closing a Socket.
* sigaction: (libc)Advanced Signal Handling.
* sigaddset: (libc)Signal Sets.
* sigaltstack: (libc)Signal Stack.
* sigblock: (libc)BSD Signal Handling.
* sigdelset: (libc)Signal Sets.
* sigemptyset: (libc)Signal Sets.
* sigfillset: (libc)Signal Sets.
* siginterrupt: (libc)BSD Signal Handling.
* sigismember: (libc)Signal Sets.
* siglongjmp: (libc)Non-Local Exits and Signals.
* sigmask: (libc)BSD Signal Handling.
* signal: (libc)Basic Signal Handling.
* signbit: (libc)FP Bit Twiddling.
* significand: (libc)Normalization Functions.
* significandf: (libc)Normalization Functions.
* significandl: (libc)Normalization Functions.
* sigpause: (libc)BSD Signal Handling.
* sigpending: (libc)Checking for Pending Signals.
* sigprocmask: (libc)Process Signal Mask.
* sigsetjmp: (libc)Non-Local Exits and Signals.
* sigsetmask: (libc)BSD Signal Handling.
* sigstack: (libc)Signal Stack.
* sigsuspend: (libc)Sigsuspend.
* sin: (libc)Trig Functions.
* sincos: (libc)Trig Functions.
* sincosf: (libc)Trig Functions.
* sincosfN: (libc)Trig Functions.
* sincosfNx: (libc)Trig Functions.
* sincosl: (libc)Trig Functions.
* sinf: (libc)Trig Functions.
* sinfN: (libc)Trig Functions.
* sinfNx: (libc)Trig Functions.
* sinh: (libc)Hyperbolic Functions.
* sinhf: (libc)Hyperbolic Functions.
* sinhfN: (libc)Hyperbolic Functions.
* sinhfNx: (libc)Hyperbolic Functions.
* sinhl: (libc)Hyperbolic Functions.
* sinl: (libc)Trig Functions.
* sleep: (libc)Sleeping.
* snprintf: (libc)Formatted Output Functions.
* socket: (libc)Creating a Socket.
* socketpair: (libc)Socket Pairs.
* sprintf: (libc)Formatted Output Functions.
* sqrt: (libc)Exponents and Logarithms.
* sqrtf: (libc)Exponents and Logarithms.
* sqrtfN: (libc)Exponents and Logarithms.
* sqrtfNx: (libc)Exponents and Logarithms.
* sqrtl: (libc)Exponents and Logarithms.
* srand48: (libc)SVID Random.
* srand48_r: (libc)SVID Random.
* srand: (libc)ISO Random.
* srandom: (libc)BSD Random.
* srandom_r: (libc)BSD Random.
* sscanf: (libc)Formatted Input Functions.
* ssignal: (libc)Basic Signal Handling.
* stat64: (libc)Reading Attributes.
* stat: (libc)Reading Attributes.
* stime: (libc)Simple Calendar Time.
* stpcpy: (libc)Copying Strings and Arrays.
* stpncpy: (libc)Truncating Strings.
* strcasecmp: (libc)String/Array Comparison.
* strcasestr: (libc)Search Functions.
* strcat: (libc)Concatenating Strings.
* strchr: (libc)Search Functions.
* strchrnul: (libc)Search Functions.
* strcmp: (libc)String/Array Comparison.
* strcoll: (libc)Collation Functions.
* strcpy: (libc)Copying Strings and Arrays.
* strcspn: (libc)Search Functions.
* strdup: (libc)Copying Strings and Arrays.
* strdupa: (libc)Copying Strings and Arrays.
* strerror: (libc)Error Messages.
* strerror_r: (libc)Error Messages.
* strfmon: (libc)Formatting Numbers.
* strfromd: (libc)Printing of Floats.
* strfromf: (libc)Printing of Floats.
* strfromfN: (libc)Printing of Floats.
* strfromfNx: (libc)Printing of Floats.
* strfroml: (libc)Printing of Floats.
* strfry: (libc)Shuffling Bytes.
* strftime: (libc)Formatting Calendar Time.
* strlen: (libc)String Length.
* strncasecmp: (libc)String/Array Comparison.
* strncat: (libc)Truncating Strings.
* strncmp: (libc)String/Array Comparison.
* strncpy: (libc)Truncating Strings.
* strndup: (libc)Truncating Strings.
* strndupa: (libc)Truncating Strings.
* strnlen: (libc)String Length.
* strpbrk: (libc)Search Functions.
* strptime: (libc)Low-Level Time String Parsing.
* strrchr: (libc)Search Functions.
* strsep: (libc)Finding Tokens in a String.
* strsignal: (libc)Signal Messages.
* strspn: (libc)Search Functions.
* strstr: (libc)Search Functions.
* strtod: (libc)Parsing of Floats.
* strtof: (libc)Parsing of Floats.
* strtofN: (libc)Parsing of Floats.
* strtofNx: (libc)Parsing of Floats.
* strtoimax: (libc)Parsing of Integers.
* strtok: (libc)Finding Tokens in a String.
* strtok_r: (libc)Finding Tokens in a String.
* strtol: (libc)Parsing of Integers.
* strtold: (libc)Parsing of Floats.
* strtoll: (libc)Parsing of Integers.
* strtoq: (libc)Parsing of Integers.
* strtoul: (libc)Parsing of Integers.
* strtoull: (libc)Parsing of Integers.
* strtoumax: (libc)Parsing of Integers.
* strtouq: (libc)Parsing of Integers.
* strverscmp: (libc)String/Array Comparison.
* strxfrm: (libc)Collation Functions.
* stty: (libc)BSD Terminal Modes.
* swapcontext: (libc)System V contexts.
* swprintf: (libc)Formatted Output Functions.
* swscanf: (libc)Formatted Input Functions.
* symlink: (libc)Symbolic Links.
* sync: (libc)Synchronizing I/O.
* syscall: (libc)System Calls.
* sysconf: (libc)Sysconf Definition.
* sysctl: (libc)System Parameters.
* syslog: (libc)syslog; vsyslog.
* system: (libc)Running a Command.
* sysv_signal: (libc)Basic Signal Handling.
* tan: (libc)Trig Functions.
* tanf: (libc)Trig Functions.
* tanfN: (libc)Trig Functions.
* tanfNx: (libc)Trig Functions.
* tanh: (libc)Hyperbolic Functions.
* tanhf: (libc)Hyperbolic Functions.
* tanhfN: (libc)Hyperbolic Functions.
* tanhfNx: (libc)Hyperbolic Functions.
* tanhl: (libc)Hyperbolic Functions.
* tanl: (libc)Trig Functions.
* tcdrain: (libc)Line Control.
* tcflow: (libc)Line Control.
* tcflush: (libc)Line Control.
* tcgetattr: (libc)Mode Functions.
* tcgetpgrp: (libc)Terminal Access Functions.
* tcgetsid: (libc)Terminal Access Functions.
* tcsendbreak: (libc)Line Control.
* tcsetattr: (libc)Mode Functions.
* tcsetpgrp: (libc)Terminal Access Functions.
* tdelete: (libc)Tree Search Function.
* tdestroy: (libc)Tree Search Function.
* telldir: (libc)Random Access Directory.
* tempnam: (libc)Temporary Files.
* textdomain: (libc)Locating gettext catalog.
* tfind: (libc)Tree Search Function.
* tgamma: (libc)Special Functions.
* tgammaf: (libc)Special Functions.
* tgammafN: (libc)Special Functions.
* tgammafNx: (libc)Special Functions.
* tgammal: (libc)Special Functions.
* thrd_create: (libc)ISO C Thread Management.
* thrd_current: (libc)ISO C Thread Management.
* thrd_detach: (libc)ISO C Thread Management.
* thrd_equal: (libc)ISO C Thread Management.
* thrd_exit: (libc)ISO C Thread Management.
* thrd_join: (libc)ISO C Thread Management.
* thrd_sleep: (libc)ISO C Thread Management.
* thrd_yield: (libc)ISO C Thread Management.
* time: (libc)Simple Calendar Time.
* timegm: (libc)Broken-down Time.
* timelocal: (libc)Broken-down Time.
* times: (libc)Processor Time.
* tmpfile64: (libc)Temporary Files.
* tmpfile: (libc)Temporary Files.
* tmpnam: (libc)Temporary Files.
* tmpnam_r: (libc)Temporary Files.
* toascii: (libc)Case Conversion.
* tolower: (libc)Case Conversion.
* totalorder: (libc)FP Comparison Functions.
* totalorderf: (libc)FP Comparison Functions.
* totalorderfN: (libc)FP Comparison Functions.
* totalorderfNx: (libc)FP Comparison Functions.
* totalorderl: (libc)FP Comparison Functions.
* totalordermag: (libc)FP Comparison Functions.
* totalordermagf: (libc)FP Comparison Functions.
* totalordermagfN: (libc)FP Comparison Functions.
* totalordermagfNx: (libc)FP Comparison Functions.
* totalordermagl: (libc)FP Comparison Functions.
* toupper: (libc)Case Conversion.
* towctrans: (libc)Wide Character Case Conversion.
* towlower: (libc)Wide Character Case Conversion.
* towupper: (libc)Wide Character Case Conversion.
* trunc: (libc)Rounding Functions.
* truncate64: (libc)File Size.
* truncate: (libc)File Size.
* truncf: (libc)Rounding Functions.
* truncfN: (libc)Rounding Functions.
* truncfNx: (libc)Rounding Functions.
* truncl: (libc)Rounding Functions.
* tsearch: (libc)Tree Search Function.
* tss_create: (libc)ISO C Thread-local Storage.
* tss_delete: (libc)ISO C Thread-local Storage.
* tss_get: (libc)ISO C Thread-local Storage.
* tss_set: (libc)ISO C Thread-local Storage.
* ttyname: (libc)Is It a Terminal.
* ttyname_r: (libc)Is It a Terminal.
* twalk: (libc)Tree Search Function.
* tzset: (libc)Time Zone Functions.
* ufromfp: (libc)Rounding Functions.
* ufromfpf: (libc)Rounding Functions.
* ufromfpfN: (libc)Rounding Functions.
* ufromfpfNx: (libc)Rounding Functions.
* ufromfpl: (libc)Rounding Functions.
* ufromfpx: (libc)Rounding Functions.
* ufromfpxf: (libc)Rounding Functions.
* ufromfpxfN: (libc)Rounding Functions.
* ufromfpxfNx: (libc)Rounding Functions.
* ufromfpxl: (libc)Rounding Functions.
* ulimit: (libc)Limits on Resources.
* umask: (libc)Setting Permissions.
* umount2: (libc)Mount-Unmount-Remount.
* umount: (libc)Mount-Unmount-Remount.
* uname: (libc)Platform Type.
* ungetc: (libc)How Unread.
* ungetwc: (libc)How Unread.
* unlink: (libc)Deleting Files.
* unlockpt: (libc)Allocation.
* unsetenv: (libc)Environment Access.
* updwtmp: (libc)Manipulating the Database.
* utime: (libc)File Times.
* utimes: (libc)File Times.
* utmpname: (libc)Manipulating the Database.
* utmpxname: (libc)XPG Functions.
* va_arg: (libc)Argument Macros.
* va_copy: (libc)Argument Macros.
* va_end: (libc)Argument Macros.
* va_start: (libc)Argument Macros.
* valloc: (libc)Aligned Memory Blocks.
* vasprintf: (libc)Variable Arguments Output.
* verr: (libc)Error Messages.
* verrx: (libc)Error Messages.
* versionsort64: (libc)Scanning Directory Content.
* versionsort: (libc)Scanning Directory Content.
* vfork: (libc)Creating a Process.
* vfprintf: (libc)Variable Arguments Output.
* vfscanf: (libc)Variable Arguments Input.
* vfwprintf: (libc)Variable Arguments Output.
* vfwscanf: (libc)Variable Arguments Input.
* vlimit: (libc)Limits on Resources.
* vprintf: (libc)Variable Arguments Output.
* vscanf: (libc)Variable Arguments Input.
* vsnprintf: (libc)Variable Arguments Output.
* vsprintf: (libc)Variable Arguments Output.
* vsscanf: (libc)Variable Arguments Input.
* vswprintf: (libc)Variable Arguments Output.
* vswscanf: (libc)Variable Arguments Input.
* vsyslog: (libc)syslog; vsyslog.
* vtimes: (libc)Resource Usage.
* vwarn: (libc)Error Messages.
* vwarnx: (libc)Error Messages.
* vwprintf: (libc)Variable Arguments Output.
* vwscanf: (libc)Variable Arguments Input.
* wait3: (libc)BSD Wait Functions.
* wait4: (libc)Process Completion.
* wait: (libc)Process Completion.
* waitpid: (libc)Process Completion.
* warn: (libc)Error Messages.
* warnx: (libc)Error Messages.
* wcpcpy: (libc)Copying Strings and Arrays.
* wcpncpy: (libc)Truncating Strings.
* wcrtomb: (libc)Converting a Character.
* wcscasecmp: (libc)String/Array Comparison.
* wcscat: (libc)Concatenating Strings.
* wcschr: (libc)Search Functions.
* wcschrnul: (libc)Search Functions.
* wcscmp: (libc)String/Array Comparison.
* wcscoll: (libc)Collation Functions.
* wcscpy: (libc)Copying Strings and Arrays.
* wcscspn: (libc)Search Functions.
* wcsdup: (libc)Copying Strings and Arrays.
* wcsftime: (libc)Formatting Calendar Time.
* wcslen: (libc)String Length.
* wcsncasecmp: (libc)String/Array Comparison.
* wcsncat: (libc)Truncating Strings.
* wcsncmp: (libc)String/Array Comparison.
* wcsncpy: (libc)Truncating Strings.
* wcsnlen: (libc)String Length.
* wcsnrtombs: (libc)Converting Strings.
* wcspbrk: (libc)Search Functions.
* wcsrchr: (libc)Search Functions.
* wcsrtombs: (libc)Converting Strings.
* wcsspn: (libc)Search Functions.
* wcsstr: (libc)Search Functions.
* wcstod: (libc)Parsing of Floats.
* wcstof: (libc)Parsing of Floats.
* wcstofN: (libc)Parsing of Floats.
* wcstofNx: (libc)Parsing of Floats.
* wcstoimax: (libc)Parsing of Integers.
* wcstok: (libc)Finding Tokens in a String.
* wcstol: (libc)Parsing of Integers.
* wcstold: (libc)Parsing of Floats.
* wcstoll: (libc)Parsing of Integers.
* wcstombs: (libc)Non-reentrant String Conversion.
* wcstoq: (libc)Parsing of Integers.
* wcstoul: (libc)Parsing of Integers.
* wcstoull: (libc)Parsing of Integers.
* wcstoumax: (libc)Parsing of Integers.
* wcstouq: (libc)Parsing of Integers.
* wcswcs: (libc)Search Functions.
* wcsxfrm: (libc)Collation Functions.
* wctob: (libc)Converting a Character.
* wctomb: (libc)Non-reentrant Character Conversion.
* wctrans: (libc)Wide Character Case Conversion.
* wctype: (libc)Classification of Wide Characters.
* wmemchr: (libc)Search Functions.
* wmemcmp: (libc)String/Array Comparison.
* wmemcpy: (libc)Copying Strings and Arrays.
* wmemmove: (libc)Copying Strings and Arrays.
* wmempcpy: (libc)Copying Strings and Arrays.
* wmemset: (libc)Copying Strings and Arrays.
* wordexp: (libc)Calling Wordexp.
* wordfree: (libc)Calling Wordexp.
* wprintf: (libc)Formatted Output Functions.
* write: (libc)I/O Primitives.
* writev: (libc)Scatter-Gather.
* wscanf: (libc)Formatted Input Functions.
* y0: (libc)Special Functions.
* y0f: (libc)Special Functions.
* y0fN: (libc)Special Functions.
* y0fNx: (libc)Special Functions.
* y0l: (libc)Special Functions.
* y1: (libc)Special Functions.
* y1f: (libc)Special Functions.
* y1fN: (libc)Special Functions.
* y1fNx: (libc)Special Functions.
* y1l: (libc)Special Functions.
* yn: (libc)Special Functions.
* ynf: (libc)Special Functions.
* ynfN: (libc)Special Functions.
* ynfNx: (libc)Special Functions.
* ynl: (libc)Special Functions.
END-INFO-DIR-ENTRY

   This file documents the GNU C Library.

   This is `The GNU C Library Reference Manual', for version 2.29.

   Copyright (C) 1993-2019 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version
1.3 or any later version published by the Free Software Foundation;
with the Invariant Sections being "Free Software Needs Free
Documentation" and "GNU Lesser General Public License", the Front-Cover
texts being "A GNU Manual", and with the Back-Cover Texts as in (a)
below.  A copy of the license is included in the section entitled "GNU
Free Documentation License".

   (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
modify this GNU manual.  Buying copies from the FSF supports it in
developing GNU and promoting software freedom."


File: libc.info,  Node: Locked Memory Details,  Next: Page Lock Functions,  Prev: Why Lock Pages,  Up: Locking Pages

3.5.2 Locked Memory Details
---------------------------

A memory lock is associated with a virtual page, not a real frame.  The
paging rule is: If a frame backs at least one locked page, don't page it
out.

   Memory locks do not stack.  I.e., you can't lock a particular page
twice so that it has to be unlocked twice before it is truly unlocked.
It is either locked or it isn't.

   A memory lock persists until the process that owns the memory
explicitly unlocks it.  (But process termination and exec cause the
virtual memory to cease to exist, which you might say means it isn't
locked any more).

   Memory locks are not inherited by child processes.  (But note that
on a modern Unix system, immediately after a fork, the parent's and the
child's virtual address space are backed by the same real page frames,
so the child enjoys the parent's locks).  *Note Creating a Process::.

   Because of its ability to impact other processes, only the superuser
can lock a page.  Any process can unlock its own page.

   The system sets limits on the amount of memory a process can have
locked and the amount of real memory it can have dedicated to it.
*Note Limits on Resources::.

   In Linux, locked pages aren't as locked as you might think.  Two
virtual pages that are not shared memory can nonetheless be backed by
the same real frame.  The kernel does this in the name of efficiency
when it knows both virtual pages contain identical data, and does it
even if one or both of the virtual pages are locked.

   But when a process modifies one of those pages, the kernel must get
it a separate frame and fill it with the page's data.  This is known as
a "copy-on-write page fault".  It takes a small amount of time and in a
pathological case, getting that frame may require I/O.  

   To make sure this doesn't happen to your program, don't just lock the
pages.  Write to them as well, unless you know you won't write to them
ever.  And to make sure you have pre-allocated frames for your stack,
enter a scope that declares a C automatic variable larger than the
maximum stack size you will need, set it to something, then return from
its scope.


File: libc.info,  Node: Page Lock Functions,  Prev: Locked Memory Details,  Up: Locking Pages

3.5.3 Functions To Lock And Unlock Pages
----------------------------------------

The symbols in this section are declared in `sys/mman.h'.  These
functions are defined by POSIX.1b, but their availability depends on
your kernel.  If your kernel doesn't allow these functions, they exist
but always fail.  They _are_ available with a Linux kernel.

   *Portability Note:* POSIX.1b requires that when the `mlock' and
`munlock' functions are available, the file `unistd.h' define the macro
`_POSIX_MEMLOCK_RANGE' and the file `limits.h' define the macro
`PAGESIZE' to be the size of a memory page in bytes.  It requires that
when the `mlockall' and `munlockall' functions are available, the
`unistd.h' file define the macro `_POSIX_MEMLOCK'.  The GNU C Library
conforms to this requirement.

 -- Function: int mlock (const void *ADDR, size_t LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `mlock' locks a range of the calling process' virtual pages.

     The range of memory starts at address ADDR and is LEN bytes long.
     Actually, since you must lock whole pages, it is the range of
     pages that include any part of the specified range.

     When the function returns successfully, each of those pages is
     backed by (connected to) a real frame (is resident) and is marked
     to stay that way.  This means the function may cause page-ins and
     have to wait for them.

     When the function fails, it does not affect the lock status of any
     pages.

     The return value is zero if the function succeeds.  Otherwise, it
     is `-1' and `errno' is set accordingly.  `errno' values specific
     to this function are:

    `ENOMEM'
             * At least some of the specified address range does not
               exist in the calling process' virtual address space.

             * The locking would cause the process to exceed its locked
               page limit.

    `EPERM'
          The calling process is not superuser.

    `EINVAL'
          LEN is not positive.

    `ENOSYS'
          The kernel does not provide `mlock' capability.


 -- Function: int mlock2 (const void *ADDR, size_t LEN, unsigned int
          FLAGS)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to `mlock'.  If FLAGS is zero, a call to
     `mlock2' behaves exactly as the equivalent call to `mlock'.

     The FLAGS argument must be a combination of zero or more of the
     following flags:

    `MLOCK_ONFAULT'
          Only those pages in the specified address range which are
          already in memory are locked immediately.  Additional pages
          in the range are automatically locked in case of a page fault
          and allocation of memory.

     Like `mlock', `mlock2' returns zero on success and `-1' on
     failure, setting `errno' accordingly.  Additional `errno' values
     defined for `mlock2' are:

    `EINVAL'
          The specified (non-zero) FLAGS argument is not supported by
          this system.

   You can lock _all_ a process' memory with `mlockall'.  You unlock
memory with `munlock' or `munlockall'.

   To avoid all page faults in a C program, you have to use `mlockall',
because some of the memory a program uses is hidden from the C code,
e.g. the stack and automatic variables, and you wouldn't know what
address to tell `mlock'.

 -- Function: int munlock (const void *ADDR, size_t LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `munlock' unlocks a range of the calling process' virtual pages.

     `munlock' is the inverse of `mlock' and functions completely
     analogously to `mlock', except that there is no `EPERM' failure.


 -- Function: int mlockall (int FLAGS)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `mlockall' locks all the pages in a process' virtual memory address
     space, and/or any that are added to it in the future.  This
     includes the pages of the code, data and stack segment, as well as
     shared libraries, user space kernel data, shared memory, and
     memory mapped files.

     FLAGS is a string of single bit flags represented by the following
     macros.  They tell `mlockall' which of its functions you want.  All
     other bits must be zero.

    `MCL_CURRENT'
          Lock all pages which currently exist in the calling process'
          virtual address space.

    `MCL_FUTURE'
          Set a mode such that any pages added to the process' virtual
          address space in the future will be locked from birth.  This
          mode does not affect future address spaces owned by the same
          process so exec, which replaces a process' address space,
          wipes out `MCL_FUTURE'.  *Note Executing a File::.


     When the function returns successfully, and you specified
     `MCL_CURRENT', all of the process' pages are backed by (connected
     to) real frames (they are resident) and are marked to stay that
     way.  This means the function may cause page-ins and have to wait
     for them.

     When the process is in `MCL_FUTURE' mode because it successfully
     executed this function and specified `MCL_CURRENT', any system call
     by the process that requires space be added to its virtual address
     space fails with `errno' = `ENOMEM' if locking the additional space
     would cause the process to exceed its locked page limit.  In the
     case that the address space addition that can't be accommodated is
     stack expansion, the stack expansion fails and the kernel sends a
     `SIGSEGV' signal to the process.

     When the function fails, it does not affect the lock status of any
     pages or the future locking mode.

     The return value is zero if the function succeeds.  Otherwise, it
     is `-1' and `errno' is set accordingly.  `errno' values specific
     to this function are:

    `ENOMEM'
             * At least some of the specified address range does not
               exist in the calling process' virtual address space.

             * The locking would cause the process to exceed its locked
               page limit.

    `EPERM'
          The calling process is not superuser.

    `EINVAL'
          Undefined bits in FLAGS are not zero.

    `ENOSYS'
          The kernel does not provide `mlockall' capability.


     You can lock just specific pages with `mlock'.  You unlock pages
     with `munlockall' and `munlock'.


 -- Function: int munlockall (void)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `munlockall' unlocks every page in the calling process' virtual
     address space and turns off `MCL_FUTURE' future locking mode.

     The return value is zero if the function succeeds.  Otherwise, it
     is `-1' and `errno' is set accordingly.  The only way this
     function can fail is for generic reasons that all functions and
     system calls can fail, so there are no specific `errno' values.



File: libc.info,  Node: Character Handling,  Next: String and Array Utilities,  Prev: Memory,  Up: Top

4 Character Handling
********************

Programs that work with characters and strings often need to classify a
character--is it alphabetic, is it a digit, is it whitespace, and so
on--and perform case conversion operations on characters.  The
functions in the header file `ctype.h' are provided for this purpose.  

   Since the choice of locale and character set can alter the
classifications of particular character codes, all of these functions
are affected by the current locale.  (More precisely, they are affected
by the locale currently selected for character classification--the
`LC_CTYPE' category; see *Note Locale Categories::.)

   The ISO C standard specifies two different sets of functions.  The
one set works on `char' type characters, the other one on `wchar_t'
wide characters (*note Extended Char Intro::).

* Menu:

* Classification of Characters::       Testing whether characters are
			                letters, digits, punctuation, etc.

* Case Conversion::                    Case mapping, and the like.
* Classification of Wide Characters::  Character class determination for
                                        wide characters.
* Using Wide Char Classes::            Notes on using the wide character
                                        classes.
* Wide Character Case Conversion::     Mapping of wide characters.


File: libc.info,  Node: Classification of Characters,  Next: Case Conversion,  Up: Character Handling

4.1 Classification of Characters
================================

This section explains the library functions for classifying characters.
For example, `isalpha' is the function to test for an alphabetic
character.  It takes one argument, the character to test, and returns a
nonzero integer if the character is alphabetic, and zero otherwise.  You
would use it like this:

     if (isalpha (c))
       printf ("The character `%c' is alphabetic.\n", c);

   Each of the functions in this section tests for membership in a
particular class of characters; each has a name starting with `is'.
Each of them takes one argument, which is a character to test, and
returns an `int' which is treated as a boolean value.  The character
argument is passed as an `int', and it may be the constant value `EOF'
instead of a real character.

   The attributes of any given character can vary between locales.
*Note Locales::, for more information on locales.

   These functions are declared in the header file `ctype.h'.  

 -- Function: int islower (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a lower-case letter.  The letter need not be
     from the Latin alphabet, any alphabet representable is valid.

 -- Function: int isupper (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is an upper-case letter.  The letter need not be
     from the Latin alphabet, any alphabet representable is valid.

 -- Function: int isalpha (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is an alphabetic character (a letter).  If
     `islower' or `isupper' is true of a character, then `isalpha' is
     also true.

     In some locales, there may be additional characters for which
     `isalpha' is true--letters which are neither upper case nor lower
     case.  But in the standard `"C"' locale, there are no such
     additional characters.

 -- Function: int isdigit (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a decimal digit (`0' through `9').

 -- Function: int isalnum (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is an alphanumeric character (a letter or
     number); in other words, if either `isalpha' or `isdigit' is true
     of a character, then `isalnum' is also true.

 -- Function: int isxdigit (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a hexadecimal digit.  Hexadecimal digits
     include the normal decimal digits `0' through `9' and the letters
     `A' through `F' and `a' through `f'.

 -- Function: int ispunct (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a punctuation character.  This means any
     printing character that is not alphanumeric or a space character.

 -- Function: int isspace (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a "whitespace" character.  In the standard
     `"C"' locale, `isspace' returns true for only the standard
     whitespace characters:

    `' ''
          space

    `'\f''
          formfeed

    `'\n''
          newline

    `'\r''
          carriage return

    `'\t''
          horizontal tab

    `'\v''
          vertical tab

 -- Function: int isblank (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a blank character; that is, a space or a tab.
     This function was originally a GNU extension, but was added in
     ISO C99.

 -- Function: int isgraph (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a graphic character; that is, a character
     that has a glyph associated with it.  The whitespace characters
     are not considered graphic.

 -- Function: int isprint (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a printing character.  Printing characters
     include all the graphic characters, plus the space (` ') character.

 -- Function: int iscntrl (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a control character (that is, a character that
     is not a printing character).

 -- Function: int isascii (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns true if C is a 7-bit `unsigned char' value that fits into
     the US/UK ASCII character set.  This function is a BSD extension
     and is also an SVID extension.


File: libc.info,  Node: Case Conversion,  Next: Classification of Wide Characters,  Prev: Classification of Characters,  Up: Character Handling

4.2 Case Conversion
===================

This section explains the library functions for performing conversions
such as case mappings on characters.  For example, `toupper' converts
any character to upper case if possible.  If the character can't be
converted, `toupper' returns it unchanged.

   These functions take one argument of type `int', which is the
character to convert, and return the converted character as an `int'.
If the conversion is not applicable to the argument given, the argument
is returned unchanged.

   *Compatibility Note:* In pre-ISO C dialects, instead of returning
the argument unchanged, these functions may fail when the argument is
not suitable for the conversion.  Thus for portability, you may need to
write `islower(c) ? toupper(c) : c' rather than just `toupper(c)'.

   These functions are declared in the header file `ctype.h'.  

 -- Function: int tolower (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     If C is an upper-case letter, `tolower' returns the corresponding
     lower-case letter.  If C is not an upper-case letter, C is
     returned unchanged.

 -- Function: int toupper (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     If C is a lower-case letter, `toupper' returns the corresponding
     upper-case letter.  Otherwise C is returned unchanged.

 -- Function: int toascii (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function converts C to a 7-bit `unsigned char' value that
     fits into the US/UK ASCII character set, by clearing the high-order
     bits.  This function is a BSD extension and is also an SVID
     extension.

 -- Function: int _tolower (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is identical to `tolower', and is provided for compatibility
     with the SVID.  *Note SVID::.

 -- Function: int _toupper (int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is identical to `toupper', and is provided for compatibility
     with the SVID.


File: libc.info,  Node: Classification of Wide Characters,  Next: Using Wide Char Classes,  Prev: Case Conversion,  Up: Character Handling

4.3 Character class determination for wide characters
=====================================================

Amendment 1 to ISO C90 defines functions to classify wide characters.
Although the original ISO C90 standard already defined the type
`wchar_t', no functions operating on them were defined.

   The general design of the classification functions for wide
characters is more general.  It allows extensions to the set of
available classifications, beyond those which are always available.
The POSIX standard specifies how extensions can be made, and this is
already implemented in the GNU C Library implementation of the
`localedef' program.

   The character class functions are normally implemented with bitsets,
with a bitset per character.  For a given character, the appropriate
bitset is read from a table and a test is performed as to whether a
certain bit is set.  Which bit is tested for is determined by the class.

   For the wide character classification functions this is made visible.
There is a type classification type defined, a function to retrieve this
value for a given class, and a function to test whether a given
character is in this class, using the classification value.  On top of
this the normal character classification functions as used for `char'
objects can be defined.

 -- Data type: wctype_t
     The `wctype_t' can hold a value which represents a character class.
     The only defined way to generate such a value is by using the
     `wctype' function.

     This type is defined in `wctype.h'.

 -- Function: wctype_t wctype (const char *PROPERTY)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     `wctype' returns a value representing a class of wide characters
     which is identified by the string PROPERTY.  Besides some standard
     properties each locale can define its own ones.  In case no
     property with the given name is known for the current locale
     selected for the `LC_CTYPE' category, the function returns zero.

     The properties known in every locale are:

     `"alnum"'         `"alpha"'         `"cntrl"'         `"digit"'
     `"graph"'         `"lower"'         `"print"'         `"punct"'
     `"space"'         `"upper"'         `"xdigit"'        

     This function is declared in `wctype.h'.

   To test the membership of a character to one of the non-standard
classes the ISO C standard defines a completely new function.

 -- Function: int iswctype (wint_t WC, wctype_t DESC)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function returns a nonzero value if WC is in the character
     class specified by DESC.  DESC must previously be returned by a
     successful call to `wctype'.

     This function is declared in `wctype.h'.

   To make it easier to use the commonly-used classification functions,
they are defined in the C library.  There is no need to use `wctype' if
the property string is one of the known character classes.  In some
situations it is desirable to construct the property strings, and then
it is important that `wctype' can also handle the standard classes.

 -- Function: int iswalnum (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function returns a nonzero value if WC is an alphanumeric
     character (a letter or number); in other words, if either
     `iswalpha' or `iswdigit' is true of a character, then `iswalnum'
     is also true.

     This function can be implemented using

          iswctype (wc, wctype ("alnum"))

     It is declared in `wctype.h'.

 -- Function: int iswalpha (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is an alphabetic character (a letter).  If
     `iswlower' or `iswupper' is true of a character, then `iswalpha'
     is also true.

     In some locales, there may be additional characters for which
     `iswalpha' is true--letters which are neither upper case nor lower
     case.  But in the standard `"C"' locale, there are no such
     additional characters.

     This function can be implemented using

          iswctype (wc, wctype ("alpha"))

     It is declared in `wctype.h'.

 -- Function: int iswcntrl (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a control character (that is, a character
     that is not a printing character).

     This function can be implemented using

          iswctype (wc, wctype ("cntrl"))

     It is declared in `wctype.h'.

 -- Function: int iswdigit (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a digit (e.g., `0' through `9').  Please
     note that this function does not only return a nonzero value for
     _decimal_ digits, but for all kinds of digits.  A consequence is
     that code like the following will *not* work unconditionally for
     wide characters:

          n = 0;
          while (iswdigit (*wc))
            {
              n *= 10;
              n += *wc++ - L'0';
            }

     This function can be implemented using

          iswctype (wc, wctype ("digit"))

     It is declared in `wctype.h'.

 -- Function: int iswgraph (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a graphic character; that is, a character
     that has a glyph associated with it.  The whitespace characters
     are not considered graphic.

     This function can be implemented using

          iswctype (wc, wctype ("graph"))

     It is declared in `wctype.h'.

 -- Function: int iswlower (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a lower-case letter.  The letter need not be
     from the Latin alphabet, any alphabet representable is valid.

     This function can be implemented using

          iswctype (wc, wctype ("lower"))

     It is declared in `wctype.h'.

 -- Function: int iswprint (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a printing character.  Printing characters
     include all the graphic characters, plus the space (` ') character.

     This function can be implemented using

          iswctype (wc, wctype ("print"))

     It is declared in `wctype.h'.

 -- Function: int iswpunct (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a punctuation character.  This means any
     printing character that is not alphanumeric or a space character.

     This function can be implemented using

          iswctype (wc, wctype ("punct"))

     It is declared in `wctype.h'.

 -- Function: int iswspace (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a "whitespace" character.  In the standard
     `"C"' locale, `iswspace' returns true for only the standard
     whitespace characters:

    `L' ''
          space

    `L'\f''
          formfeed

    `L'\n''
          newline

    `L'\r''
          carriage return

    `L'\t''
          horizontal tab

    `L'\v''
          vertical tab

     This function can be implemented using

          iswctype (wc, wctype ("space"))

     It is declared in `wctype.h'.

 -- Function: int iswupper (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is an upper-case letter.  The letter need not be
     from the Latin alphabet, any alphabet representable is valid.

     This function can be implemented using

          iswctype (wc, wctype ("upper"))

     It is declared in `wctype.h'.

 -- Function: int iswxdigit (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a hexadecimal digit.  Hexadecimal digits
     include the normal decimal digits `0' through `9' and the letters
     `A' through `F' and `a' through `f'.

     This function can be implemented using

          iswctype (wc, wctype ("xdigit"))

     It is declared in `wctype.h'.

   The GNU C Library also provides a function which is not defined in
the ISO C standard but which is available as a version for single byte
characters as well.

 -- Function: int iswblank (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     Returns true if WC is a blank character; that is, a space or a tab.
     This function was originally a GNU extension, but was added in
     ISO C99.  It is declared in `wchar.h'.


File: libc.info,  Node: Using Wide Char Classes,  Next: Wide Character Case Conversion,  Prev: Classification of Wide Characters,  Up: Character Handling

4.4 Notes on using the wide character classes
=============================================

The first note is probably not astonishing but still occasionally a
cause of problems.  The `iswXXX' functions can be implemented using
macros and in fact, the GNU C Library does this.  They are still
available as real functions but when the `wctype.h' header is included
the macros will be used.  This is the same as the `char' type versions
of these functions.

   The second note covers something new.  It can be best illustrated by
a (real-world) example.  The first piece of code is an excerpt from the
original code.  It is truncated a bit but the intention should be clear.

     int
     is_in_class (int c, const char *class)
     {
       if (strcmp (class, "alnum") == 0)
         return isalnum (c);
       if (strcmp (class, "alpha") == 0)
         return isalpha (c);
       if (strcmp (class, "cntrl") == 0)
         return iscntrl (c);
       ...
       return 0;
     }

   Now, with the `wctype' and `iswctype' you can avoid the `if'
cascades, but rewriting the code as follows is wrong:

     int
     is_in_class (int c, const char *class)
     {
       wctype_t desc = wctype (class);
       return desc ? iswctype ((wint_t) c, desc) : 0;
     }

   The problem is that it is not guaranteed that the wide character
representation of a single-byte character can be found using casting.
In fact, usually this fails miserably.  The correct solution to this
problem is to write the code as follows:

     int
     is_in_class (int c, const char *class)
     {
       wctype_t desc = wctype (class);
       return desc ? iswctype (btowc (c), desc) : 0;
     }

   *Note Converting a Character::, for more information on `btowc'.
Note that this change probably does not improve the performance of the
program a lot since the `wctype' function still has to make the string
comparisons.  It gets really interesting if the `is_in_class' function
is called more than once for the same class name.  In this case the
variable DESC could be computed once and reused for all the calls.
Therefore the above form of the function is probably not the final one.


File: libc.info,  Node: Wide Character Case Conversion,  Prev: Using Wide Char Classes,  Up: Character Handling

4.5 Mapping of wide characters.
===============================

The classification functions are also generalized by the ISO C
standard.  Instead of just allowing the two standard mappings, a locale
can contain others.  Again, the `localedef' program already supports
generating such locale data files.

 -- Data Type: wctrans_t
     This data type is defined as a scalar type which can hold a value
     representing the locale-dependent character mapping.  There is no
     way to construct such a value apart from using the return value of
     the `wctrans' function.

     This type is defined in `wctype.h'.

 -- Function: wctrans_t wctrans (const char *PROPERTY)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     The `wctrans' function has to be used to find out whether a named
     mapping is defined in the current locale selected for the
     `LC_CTYPE' category.  If the returned value is non-zero, you can
     use it afterwards in calls to `towctrans'.  If the return value is
     zero no such mapping is known in the current locale.

     Beside locale-specific mappings there are two mappings which are
     guaranteed to be available in every locale:

     `"tolower"'                        `"toupper"'

     These functions are declared in `wctype.h'.

 -- Function: wint_t towctrans (wint_t WC, wctrans_t DESC)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `towctrans' maps the input character WC according to the rules of
     the mapping for which DESC is a descriptor, and returns the value
     it finds.  DESC must be obtained by a successful call to `wctrans'.

     This function is declared in `wctype.h'.

   For the generally available mappings, the ISO C standard defines
convenient shortcuts so that it is not necessary to call `wctrans' for
them.

 -- Function: wint_t towlower (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     If WC is an upper-case letter, `towlower' returns the corresponding
     lower-case letter.  If WC is not an upper-case letter, WC is
     returned unchanged.

     `towlower' can be implemented using

          towctrans (wc, wctrans ("tolower"))

     This function is declared in `wctype.h'.

 -- Function: wint_t towupper (wint_t WC)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     If WC is a lower-case letter, `towupper' returns the corresponding
     upper-case letter.  Otherwise WC is returned unchanged.

     `towupper' can be implemented using

          towctrans (wc, wctrans ("toupper"))

     This function is declared in `wctype.h'.

   The same warnings given in the last section for the use of the wide
character classification functions apply here.  It is not possible to
simply cast a `char' type value to a `wint_t' and use it as an argument
to `towctrans' calls.


File: libc.info,  Node: String and Array Utilities,  Next: Character Set Handling,  Prev: Character Handling,  Up: Top

5 String and Array Utilities
****************************

Operations on strings (null-terminated byte sequences) are an important
part of many programs.  The GNU C Library provides an extensive set of
string utility functions, including functions for copying,
concatenating, comparing, and searching strings.  Many of these
functions can also operate on arbitrary regions of storage; for
example, the `memcpy' function can be used to copy the contents of any
kind of array.

   It's fairly common for beginning C programmers to "reinvent the
wheel" by duplicating this functionality in their own code, but it pays
to become familiar with the library functions and to make use of them,
since this offers benefits in maintenance, efficiency, and portability.

   For instance, you could easily compare one string to another in two
lines of C code, but if you use the built-in `strcmp' function, you're
less likely to make a mistake.  And, since these library functions are
typically highly optimized, your program may run faster too.

* Menu:

* Representation of Strings::   Introduction to basic concepts.
* String/Array Conventions::    Whether to use a string function or an
				 arbitrary array function.
* String Length::               Determining the length of a string.
* Copying Strings and Arrays::  Functions to copy strings and arrays.
* Concatenating Strings::       Functions to concatenate strings while copying.
* Truncating Strings::          Functions to truncate strings while copying.
* String/Array Comparison::     Functions for byte-wise and character-wise
				 comparison.
* Collation Functions::         Functions for collating strings.
* Search Functions::            Searching for a specific element or substring.
* Finding Tokens in a String::  Splitting a string into tokens by looking
				 for delimiters.
* Erasing Sensitive Data::      Clearing memory which contains sensitive
                                 data, after it's no longer needed.
* Shuffling Bytes::             Or how to flash-cook a string.
* Obfuscating Data::            Reversibly obscuring data from casual view.
* Encode Binary Data::          Encoding and Decoding of Binary Data.
* Argz and Envz Vectors::       Null-separated string vectors.


File: libc.info,  Node: Representation of Strings,  Next: String/Array Conventions,  Up: String and Array Utilities

5.1 Representation of Strings
=============================

This section is a quick summary of string concepts for beginning C
programmers.  It describes how strings are represented in C and some
common pitfalls.  If you are already familiar with this material, you
can skip this section.

   A "string" is a null-terminated array of bytes of type `char',
including the terminating null byte.  String-valued variables are
usually declared to be pointers of type `char *'.  Such variables do
not include space for the text of a string; that has to be stored
somewhere else--in an array variable, a string constant, or dynamically
allocated memory (*note Memory Allocation::).  It's up to you to store
the address of the chosen memory space into the pointer variable.
Alternatively you can store a "null pointer" in the pointer variable.
The null pointer does not point anywhere, so attempting to reference
the string it points to gets an error.

   A "multibyte character" is a sequence of one or more bytes that
represents a single character using the locale's encoding scheme; a
null byte always represents the null character.  A "multibyte string"
is a string that consists entirely of multibyte characters.  In
contrast, a "wide string" is a null-terminated sequence of `wchar_t'
objects.  A wide-string variable is usually declared to be a pointer of
type `wchar_t *', by analogy with string variables and `char *'.  *Note
Extended Char Intro::.

   By convention, the "null byte", `'\0'', marks the end of a string
and the "null wide character", `L'\0'', marks the end of a wide string.
For example, in testing to see whether the `char *' variable P points
to a null byte marking the end of a string, you can write `!*P' or `*P
== '\0''.

   A null byte is quite different conceptually from a null pointer,
although both are represented by the integer constant `0'.

   A "string literal" appears in C program source as a multibyte string
between double-quote characters (`"').  If the initial double-quote
character is immediately preceded by a capital `L' (ell) character (as
in `L"foo"'), it is a wide string literal.  String literals can also
contribute to "string concatenation": `"a" "b"' is the same as `"ab"'.
For wide strings one can use either `L"a" L"b"' or `L"a" "b"'.
Modification of string literals is not allowed by the GNU C compiler,
because literals are placed in read-only storage.

   Arrays that are declared `const' cannot be modified either.  It's
generally good style to declare non-modifiable string pointers to be of
type `const char *', since this often allows the C compiler to detect
accidental modifications as well as providing some amount of
documentation about what your program intends to do with the string.

   The amount of memory allocated for a byte array may extend past the
null byte that marks the end of the string that the array contains.  In
this document, the term "allocated size" is always used to refer to the
total amount of memory allocated for an array, while the term "length"
refers to the number of bytes up to (but not including) the terminating
null byte.  Wide strings are similar, except their sizes and lengths
count wide characters, not bytes.  

   A notorious source of program bugs is trying to put more bytes into a
string than fit in its allocated size.  When writing code that extends
strings or moves bytes into a pre-allocated array, you should be very
careful to keep track of the length of the text and make explicit
checks for overflowing the array.  Many of the library functions _do
not_ do this for you!  Remember also that you need to allocate an extra
byte to hold the null byte that marks the end of the string.

   Originally strings were sequences of bytes where each byte
represented a single character.  This is still true today if the
strings are encoded using a single-byte character encoding.  Things are
different if the strings are encoded using a multibyte encoding (for
more information on encodings see *Note Extended Char Intro::).  There
is no difference in the programming interface for these two kind of
strings; the programmer has to be aware of this and interpret the byte
sequences accordingly.

   But since there is no separate interface taking care of these
differences the byte-based string functions are sometimes hard to use.
Since the count parameters of these functions specify bytes a call to
`memcpy' could cut a multibyte character in the middle and put an
incomplete (and therefore unusable) byte sequence in the target buffer.

   To avoid these problems later versions of the ISO C standard
introduce a second set of functions which are operating on "wide
characters" (*note Extended Char Intro::).  These functions don't have
the problems the single-byte versions have since every wide character is
a legal, interpretable value.  This does not mean that cutting wide
strings at arbitrary points is without problems.  It normally is for
alphabet-based languages (except for non-normalized text) but languages
based on syllables still have the problem that more than one wide
character is necessary to complete a logical unit.  This is a higher
level problem which the C library functions are not designed to solve.
But it is at least good that no invalid byte sequences can be created.
Also, the higher level functions can also much more easily operate on
wide characters than on multibyte characters so that a common strategy
is to use wide characters internally whenever text is more than simply
copied.

   The remaining of this chapter will discuss the functions for handling
wide strings in parallel with the discussion of strings since there is
almost always an exact equivalent available.


File: libc.info,  Node: String/Array Conventions,  Next: String Length,  Prev: Representation of Strings,  Up: String and Array Utilities

5.2 String and Array Conventions
================================

This chapter describes both functions that work on arbitrary arrays or
blocks of memory, and functions that are specific to strings and wide
strings.

   Functions that operate on arbitrary blocks of memory have names
beginning with `mem' and `wmem' (such as `memcpy' and `wmemcpy') and
invariably take an argument which specifies the size (in bytes and wide
characters respectively) of the block of memory to operate on.  The
array arguments and return values for these functions have type `void
*' or `wchar_t'.  As a matter of style, the elements of the arrays used
with the `mem' functions are referred to as "bytes".  You can pass any
kind of pointer to these functions, and the `sizeof' operator is useful
in computing the value for the size argument.  Parameters to the `wmem'
functions must be of type `wchar_t *'.  These functions are not really
usable with anything but arrays of this type.

   In contrast, functions that operate specifically on strings and wide
strings have names beginning with `str' and `wcs' respectively (such as
`strcpy' and `wcscpy') and look for a terminating null byte or null
wide character instead of requiring an explicit size argument to be
passed.  (Some of these functions accept a specified maximum length,
but they also check for premature termination.)  The array arguments
and return values for these functions have type `char *' and `wchar_t
*' respectively, and the array elements are referred to as "bytes" and
"wide characters".

   In many cases, there are both `mem' and `str'/`wcs' versions of a
function.  The one that is more appropriate to use depends on the exact
situation.  When your program is manipulating arbitrary arrays or
blocks of storage, then you should always use the `mem' functions.  On
the other hand, when you are manipulating strings it is usually more
convenient to use the `str'/`wcs' functions, unless you already know
the length of the string in advance.  The `wmem' functions should be
used for wide character arrays with known size.

   Some of the memory and string functions take single characters as
arguments.  Since a value of type `char' is automatically promoted into
a value of type `int' when used as a parameter, the functions are
declared with `int' as the type of the parameter in question.  In case
of the wide character functions the situation is similar: the parameter
type for a single wide character is `wint_t' and not `wchar_t'.  This
would for many implementations not be necessary since `wchar_t' is
large enough to not be automatically promoted, but since the ISO C
standard does not require such a choice of types the `wint_t' type is
used.


File: libc.info,  Node: String Length,  Next: Copying Strings and Arrays,  Prev: String/Array Conventions,  Up: String and Array Utilities

5.3 String Length
=================

You can get the length of a string using the `strlen' function.  This
function is declared in the header file `string.h'.  

 -- Function: size_t strlen (const char *S)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `strlen' function returns the length of the string S in bytes.
     (In other words, it returns the offset of the terminating null
     byte within the array.)

     For example,
          strlen ("hello, world")
              => 12

     When applied to an array, the `strlen' function returns the length
     of the string stored there, not its allocated size.  You can get
     the allocated size of the array that holds a string using the
     `sizeof' operator:

          char string[32] = "hello, world";
          sizeof (string)
              => 32
          strlen (string)
              => 12

     But beware, this will not work unless STRING is the array itself,
     not a pointer to it.  For example:

          char string[32] = "hello, world";
          char *ptr = string;
          sizeof (string)
              => 32
          sizeof (ptr)
              => 4  /* (on a machine with 4 byte pointers) */

     This is an easy mistake to make when you are working with
     functions that take string arguments; those arguments are always
     pointers, not arrays.

     It must also be noted that for multibyte encoded strings the return
     value does not have to correspond to the number of characters in
     the string.  To get this value the string can be converted to wide
     characters and `wcslen' can be used or something like the following
     code can be used:

          /* The input is in `string'.
             The length is expected in `n'.  */
          {
            mbstate_t t;
            char *scopy = string;
            /* In initial state.  */
            memset (&t, '\0', sizeof (t));
            /* Determine number of characters.  */
            n = mbsrtowcs (NULL, &scopy, strlen (scopy), &t);
          }

     This is cumbersome to do so if the number of characters (as
     opposed to bytes) is needed often it is better to work with wide
     characters.

   The wide character equivalent is declared in `wchar.h'.

 -- Function: size_t wcslen (const wchar_t *WS)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `wcslen' function is the wide character equivalent to
     `strlen'.  The return value is the number of wide characters in the
     wide string pointed to by WS (this is also the offset of the
     terminating null wide character of WS).

     Since there are no multi wide character sequences making up one
     wide character the return value is not only the offset in the
     array, it is also the number of wide characters.

     This function was introduced in Amendment 1 to ISO C90.

 -- Function: size_t strnlen (const char *S, size_t MAXLEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     If the array S of size MAXLEN contains a null byte, the `strnlen'
     function returns the length of the string S in bytes.  Otherwise it
     returns MAXLEN.  Therefore this function is equivalent to `(strlen
     (S) < MAXLEN ? strlen (S) : MAXLEN)' but it is more efficient and
     works even if S is not null-terminated so long as MAXLEN does not
     exceed the size of S's array.

          char string[32] = "hello, world";
          strnlen (string, 32)
              => 12
          strnlen (string, 5)
              => 5

     This function is a GNU extension and is declared in `string.h'.

 -- Function: size_t wcsnlen (const wchar_t *WS, size_t MAXLEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `wcsnlen' is the wide character equivalent to `strnlen'.  The
     MAXLEN parameter specifies the maximum number of wide characters.

     This function is a GNU extension and is declared in `wchar.h'.


File: libc.info,  Node: Copying Strings and Arrays,  Next: Concatenating Strings,  Prev: String Length,  Up: String and Array Utilities

5.4 Copying Strings and Arrays
==============================

You can use the functions described in this section to copy the contents
of strings, wide strings, and arrays.  The `str' and `mem' functions
are declared in `string.h' while the `w' functions are declared in
`wchar.h'.  

   A helpful way to remember the ordering of the arguments to the
functions in this section is that it corresponds to an assignment
expression, with the destination array specified to the left of the
source array.  Most of these functions return the address of the
destination array; a few return the address of the destination's
terminating null, or of just past the destination.

   Most of these functions do not work properly if the source and
destination arrays overlap.  For example, if the beginning of the
destination array overlaps the end of the source array, the original
contents of that part of the source array may get overwritten before it
is copied.  Even worse, in the case of the string functions, the null
byte marking the end of the string may be lost, and the copy function
might get stuck in a loop trashing all the memory allocated to your
program.

   All functions that have problems copying between overlapping arrays
are explicitly identified in this manual.  In addition to functions in
this section, there are a few others like `sprintf' (*note Formatted
Output Functions::) and `scanf' (*note Formatted Input Functions::).

 -- Function: void * memcpy (void *restrict TO, const void *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `memcpy' function copies SIZE bytes from the object beginning
     at FROM into the object beginning at TO.  The behavior of this
     function is undefined if the two arrays TO and FROM overlap; use
     `memmove' instead if overlapping is possible.

     The value returned by `memcpy' is the value of TO.

     Here is an example of how you might use `memcpy' to copy the
     contents of an array:

          struct foo *oldarray, *newarray;
          int arraysize;
          ...
          memcpy (new, old, arraysize * sizeof (struct foo));

 -- Function: wchar_t * wmemcpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `wmemcpy' function copies SIZE wide characters from the object
     beginning at WFROM into the object beginning at WTO.  The behavior
     of this function is undefined if the two arrays WTO and WFROM
     overlap; use `wmemmove' instead if overlapping is possible.

     The following is a possible implementation of `wmemcpy' but there
     are more optimizations possible.

          wchar_t *
          wmemcpy (wchar_t *restrict wto, const wchar_t *restrict wfrom,
                   size_t size)
          {
            return (wchar_t *) memcpy (wto, wfrom, size * sizeof (wchar_t));
          }

     The value returned by `wmemcpy' is the value of WTO.

     This function was introduced in Amendment 1 to ISO C90.

 -- Function: void * mempcpy (void *restrict TO, const void *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `mempcpy' function is nearly identical to the `memcpy'
     function.  It copies SIZE bytes from the object beginning at
     `from' into the object pointed to by TO.  But instead of returning
     the value of TO it returns a pointer to the byte following the
     last written byte in the object beginning at TO.  I.e., the value
     is `((void *) ((char *) TO + SIZE))'.

     This function is useful in situations where a number of objects
     shall be copied to consecutive memory positions.

          void *
          combine (void *o1, size_t s1, void *o2, size_t s2)
          {
            void *result = malloc (s1 + s2);
            if (result != NULL)
              mempcpy (mempcpy (result, o1, s1), o2, s2);
            return result;
          }

     This function is a GNU extension.

 -- Function: wchar_t * wmempcpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `wmempcpy' function is nearly identical to the `wmemcpy'
     function.  It copies SIZE wide characters from the object
     beginning at `wfrom' into the object pointed to by WTO.  But
     instead of returning the value of WTO it returns a pointer to the
     wide character following the last written wide character in the
     object beginning at WTO.  I.e., the value is `WTO + SIZE'.

     This function is useful in situations where a number of objects
     shall be copied to consecutive memory positions.

     The following is a possible implementation of `wmemcpy' but there
     are more optimizations possible.

          wchar_t *
          wmempcpy (wchar_t *restrict wto, const wchar_t *restrict wfrom,
                    size_t size)
          {
            return (wchar_t *) mempcpy (wto, wfrom, size * sizeof (wchar_t));
          }

     This function is a GNU extension.

 -- Function: void * memmove (void *TO, const void *FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `memmove' copies the SIZE bytes at FROM into the SIZE bytes at TO,
     even if those two blocks of space overlap.  In the case of
     overlap, `memmove' is careful to copy the original values of the
     bytes in the block at FROM, including those bytes which also
     belong to the block at TO.

     The value returned by `memmove' is the value of TO.

 -- Function: wchar_t * wmemmove (wchar_t *WTO, const wchar_t *WFROM,
          size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `wmemmove' copies the SIZE wide characters at WFROM into the SIZE
     wide characters at WTO, even if those two blocks of space overlap.
     In the case of overlap, `wmemmove' is careful to copy the
     original values of the wide characters in the block at WFROM,
     including those wide characters which also belong to the block at
     WTO.

     The following is a possible implementation of `wmemcpy' but there
     are more optimizations possible.

          wchar_t *
          wmempcpy (wchar_t *restrict wto, const wchar_t *restrict wfrom,
                    size_t size)
          {
            return (wchar_t *) mempcpy (wto, wfrom, size * sizeof (wchar_t));
          }

     The value returned by `wmemmove' is the value of WTO.

     This function is a GNU extension.

 -- Function: void * memccpy (void *restrict TO, const void *restrict
          FROM, int C, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function copies no more than SIZE bytes from FROM to TO,
     stopping if a byte matching C is found.  The return value is a
     pointer into TO one byte past where C was copied, or a null
     pointer if no byte matching C appeared in the first SIZE bytes of
     FROM.

 -- Function: void * memset (void *BLOCK, int C, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function copies the value of C (converted to an `unsigned
     char') into each of the first SIZE bytes of the object beginning
     at BLOCK.  It returns the value of BLOCK.

 -- Function: wchar_t * wmemset (wchar_t *BLOCK, wchar_t WC, size_t
          SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function copies the value of WC into each of the first SIZE
     wide characters of the object beginning at BLOCK.  It returns the
     value of BLOCK.

 -- Function: char * strcpy (char *restrict TO, const char *restrict
          FROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This copies bytes from the string FROM (up to and including the
     terminating null byte) into the string TO.  Like `memcpy', this
     function has undefined results if the strings overlap.  The return
     value is the value of TO.

 -- Function: wchar_t * wcscpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This copies wide characters from the wide string WFROM (up to and
     including the terminating null wide character) into the string
     WTO.  Like `wmemcpy', this function has undefined results if the
     strings overlap.  The return value is the value of WTO.

 -- Function: char * strdup (const char *S)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     This function copies the string S into a newly allocated string.
     The string is allocated using `malloc'; see *Note Unconstrained
     Allocation::.  If `malloc' cannot allocate space for the new
     string, `strdup' returns a null pointer.  Otherwise it returns a
     pointer to the new string.

 -- Function: wchar_t * wcsdup (const wchar_t *WS)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     This function copies the wide string WS into a newly allocated
     string.  The string is allocated using `malloc'; see *Note
     Unconstrained Allocation::.  If `malloc' cannot allocate space for
     the new string, `wcsdup' returns a null pointer.  Otherwise it
     returns a pointer to the new wide string.

     This function is a GNU extension.

 -- Function: char * stpcpy (char *restrict TO, const char *restrict
          FROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is like `strcpy', except that it returns a pointer to
     the end of the string TO (that is, the address of the terminating
     null byte `to + strlen (from)') rather than the beginning.

     For example, this program uses `stpcpy' to concatenate `foo' and
     `bar' to produce `foobar', which it then prints.


          #include <string.h>
          #include <stdio.h>

          int
          main (void)
          {
            char buffer[10];
            char *to = buffer;
            to = stpcpy (to, "foo");
            to = stpcpy (to, "bar");
            puts (buffer);
            return 0;
          }

     This function is part of POSIX.1-2008 and later editions, but was
     available in the GNU C Library and other systems as an extension
     long before it was standardized.

     Its behavior is undefined if the strings overlap.  The function is
     declared in `string.h'.

 -- Function: wchar_t * wcpcpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is like `wcscpy', except that it returns a pointer to
     the end of the string WTO (that is, the address of the terminating
     null wide character `wto + wcslen (wfrom)') rather than the
     beginning.

     This function is not part of ISO or POSIX but was found useful
     while developing the GNU C Library itself.

     The behavior of `wcpcpy' is undefined if the strings overlap.

     `wcpcpy' is a GNU extension and is declared in `wchar.h'.

 -- Macro: char * strdupa (const char *S)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This macro is similar to `strdup' but allocates the new string
     using `alloca' instead of `malloc' (*note Variable Size
     Automatic::).  This means of course the returned string has the
     same limitations as any block of memory allocated using `alloca'.

     For obvious reasons `strdupa' is implemented only as a macro; you
     cannot get the address of this function.  Despite this limitation
     it is a useful function.  The following code shows a situation
     where using `malloc' would be a lot more expensive.


          #include <paths.h>
          #include <string.h>
          #include <stdio.h>

          const char path[] = _PATH_STDPATH;

          int
          main (void)
          {
            char *wr_path = strdupa (path);
            char *cp = strtok (wr_path, ":");

            while (cp != NULL)
              {
                puts (cp);
                cp = strtok (NULL, ":");
              }
            return 0;
          }

     Please note that calling `strtok' using PATH directly is invalid.
     It is also not allowed to call `strdupa' in the argument list of
     `strtok' since `strdupa' uses `alloca' (*note Variable Size
     Automatic::) can interfere with the parameter passing.

     This function is only available if GNU CC is used.

 -- Function: void bcopy (const void *FROM, void *TO, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is a partially obsolete alternative for `memmove', derived
     from BSD.  Note that it is not quite equivalent to `memmove',
     because the arguments are not in the same order and there is no
     return value.

 -- Function: void bzero (void *BLOCK, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is a partially obsolete alternative for `memset', derived from
     BSD.  Note that it is not as general as `memset', because the only
     value it can store is zero.


File: libc.info,  Node: Concatenating Strings,  Next: Truncating Strings,  Prev: Copying Strings and Arrays,  Up: String and Array Utilities

5.5 Concatenating Strings
=========================

The functions described in this section concatenate the contents of a
string or wide string to another.  They follow the string-copying
functions in their conventions.  *Note Copying Strings and Arrays::.
`strcat' is declared in the header file `string.h' while `wcscat' is
declared in `wchar.h'.

 -- Function: char * strcat (char *restrict TO, const char *restrict
          FROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `strcat' function is similar to `strcpy', except that the
     bytes from FROM are concatenated or appended to the end of TO,
     instead of overwriting it.  That is, the first byte from FROM
     overwrites the null byte marking the end of TO.

     An equivalent definition for `strcat' would be:

          char *
          strcat (char *restrict to, const char *restrict from)
          {
            strcpy (to + strlen (to), from);
            return to;
          }

     This function has undefined results if the strings overlap.

     As noted below, this function has significant performance issues.

 -- Function: wchar_t * wcscat (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `wcscat' function is similar to `wcscpy', except that the wide
     characters from WFROM are concatenated or appended to the end of
     WTO, instead of overwriting it.  That is, the first wide character
     from WFROM overwrites the null wide character marking the end of
     WTO.

     An equivalent definition for `wcscat' would be:

          wchar_t *
          wcscat (wchar_t *wto, const wchar_t *wfrom)
          {
            wcscpy (wto + wcslen (wto), wfrom);
            return wto;
          }

     This function has undefined results if the strings overlap.

     As noted below, this function has significant performance issues.

   Programmers using the `strcat' or `wcscat' function (or the
`strncat' or `wcsncat' functions defined in a later section, for that
matter) can easily be recognized as lazy and reckless.  In almost all
situations the lengths of the participating strings are known (it
better should be since how can one otherwise ensure the allocated size
of the buffer is sufficient?)  Or at least, one could know them if one
keeps track of the results of the various function calls.  But then it
is very inefficient to use `strcat'/`wcscat'.  A lot of time is wasted
finding the end of the destination string so that the actual copying
can start.  This is a common example:

     /* This function concatenates arbitrarily many strings.  The last
        parameter must be `NULL'.  */
     char *
     concat (const char *str, ...)
     {
       va_list ap, ap2;
       size_t total = 1;
       const char *s;
       char *result;

       va_start (ap, str);
       va_copy (ap2, ap);

       /* Determine how much space we need.  */
       for (s = str; s != NULL; s = va_arg (ap, const char *))
         total += strlen (s);

       va_end (ap);

       result = (char *) malloc (total);
       if (result != NULL)
         {
           result[0] = '\0';

           /* Copy the strings.  */
           for (s = str; s != NULL; s = va_arg (ap2, const char *))
             strcat (result, s);
         }

       va_end (ap2);

       return result;
     }

   This looks quite simple, especially the second loop where the strings
are actually copied.  But these innocent lines hide a major performance
penalty.  Just imagine that ten strings of 100 bytes each have to be
concatenated.  For the second string we search the already stored 100
bytes for the end of the string so that we can append the next string.
For all strings in total the comparisons necessary to find the end of
the intermediate results sums up to 5500!  If we combine the copying
with the search for the allocation we can write this function more
efficiently:

     char *
     concat (const char *str, ...)
     {
       va_list ap;
       size_t allocated = 100;
       char *result = (char *) malloc (allocated);

       if (result != NULL)
         {
           char *newp;
           char *wp;
           const char *s;

           va_start (ap, str);

           wp = result;
           for (s = str; s != NULL; s = va_arg (ap, const char *))
             {
               size_t len = strlen (s);

               /* Resize the allocated memory if necessary.  */
               if (wp + len + 1 > result + allocated)
                 {
                   allocated = (allocated + len) * 2;
                   newp = (char *) realloc (result, allocated);
                   if (newp == NULL)
                     {
                       free (result);
                       return NULL;
                     }
                   wp = newp + (wp - result);
                   result = newp;
                 }

               wp = mempcpy (wp, s, len);
             }

           /* Terminate the result string.  */
           *wp++ = '\0';

           /* Resize memory to the optimal size.  */
           newp = realloc (result, wp - result);
           if (newp != NULL)
             result = newp;

           va_end (ap);
         }

       return result;
     }

   With a bit more knowledge about the input strings one could fine-tune
the memory allocation.  The difference we are pointing to here is that
we don't use `strcat' anymore.  We always keep track of the length of
the current intermediate result so we can save ourselves the search for
the end of the string and use `mempcpy'.  Please note that we also
don't use `stpcpy' which might seem more natural since we are handling
strings.  But this is not necessary since we already know the length of
the string and therefore can use the faster memory copying function.
The example would work for wide characters the same way.

   Whenever a programmer feels the need to use `strcat' she or he
should think twice and look through the program to see whether the code
cannot be rewritten to take advantage of already calculated results.
Again: it is almost always unnecessary to use `strcat'.


File: libc.info,  Node: Truncating Strings,  Next: String/Array Comparison,  Prev: Concatenating Strings,  Up: String and Array Utilities

5.6 Truncating Strings while Copying
====================================

The functions described in this section copy or concatenate the
possibly-truncated contents of a string or array to another, and
similarly for wide strings.  They follow the string-copying functions
in their header conventions.  *Note Copying Strings and Arrays::.  The
`str' functions are declared in the header file `string.h' and the `wc'
functions are declared in the file `wchar.h'.

 -- Function: char * strncpy (char *restrict TO, const char *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to `strcpy' but always copies exactly
     SIZE bytes into TO.

     If FROM does not contain a null byte in its first SIZE bytes,
     `strncpy' copies just the first SIZE bytes.  In this case no null
     terminator is written into TO.

     Otherwise FROM must be a string with length less than SIZE.  In
     this case `strncpy' copies all of FROM, followed by enough null
     bytes to add up to SIZE bytes in all.

     The behavior of `strncpy' is undefined if the strings overlap.

     This function was designed for now-rarely-used arrays consisting of
     non-null bytes followed by zero or more null bytes.  It needs to
     set all SIZE bytes of the destination, even when SIZE is much
     greater than the length of FROM.  As noted below, this function is
     generally a poor choice for processing text.

 -- Function: wchar_t * wcsncpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to `wcscpy' but always copies exactly
     SIZE wide characters into WTO.

     If WFROM does not contain a null wide character in its first SIZE
     wide characters, then `wcsncpy' copies just the first SIZE wide
     characters.  In this case no null terminator is written into WTO.

     Otherwise WFROM must be a wide string with length less than SIZE.
     In this case `wcsncpy' copies all of WFROM, followed by enough
     null wide characters to add up to SIZE wide characters in all.

     The behavior of `wcsncpy' is undefined if the strings overlap.

     This function is the wide-character counterpart of `strncpy' and
     suffers from most of the problems that `strncpy' does.  For
     example, as noted below, this function is generally a poor choice
     for processing text.

 -- Function: char * strndup (const char *S, size_t SIZE)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     This function is similar to `strdup' but always copies at most
     SIZE bytes into the newly allocated string.

     If the length of S is more than SIZE, then `strndup' copies just
     the first SIZE bytes and adds a closing null byte.  Otherwise all
     bytes are copied and the string is terminated.

     This function differs from `strncpy' in that it always terminates
     the destination string.

     As noted below, this function is generally a poor choice for
     processing text.

     `strndup' is a GNU extension.

 -- Macro: char * strndupa (const char *S, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to `strndup' but like `strdupa' it
     allocates the new string using `alloca' *note Variable Size
     Automatic::.  The same advantages and limitations of `strdupa' are
     valid for `strndupa', too.

     This function is implemented only as a macro, just like `strdupa'.
     Just as `strdupa' this macro also must not be used inside the
     parameter list in a function call.

     As noted below, this function is generally a poor choice for
     processing text.

     `strndupa' is only available if GNU CC is used.

 -- Function: char * stpncpy (char *restrict TO, const char *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to `stpcpy' but copies always exactly
     SIZE bytes into TO.

     If the length of FROM is more than SIZE, then `stpncpy' copies
     just the first SIZE bytes and returns a pointer to the byte
     directly following the one which was copied last.  Note that in
     this case there is no null terminator written into TO.

     If the length of FROM is less than SIZE, then `stpncpy' copies all
     of FROM, followed by enough null bytes to add up to SIZE bytes in
     all.  This behavior is rarely useful, but it is implemented to be
     useful in contexts where this behavior of the `strncpy' is used.
     `stpncpy' returns a pointer to the _first_ written null byte.

     This function is not part of ISO or POSIX but was found useful
     while developing the GNU C Library itself.

     Its behavior is undefined if the strings overlap.  The function is
     declared in `string.h'.

     As noted below, this function is generally a poor choice for
     processing text.

 -- Function: wchar_t * wcpncpy (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to `wcpcpy' but copies always exactly
     WSIZE wide characters into WTO.

     If the length of WFROM is more than SIZE, then `wcpncpy' copies
     just the first SIZE wide characters and returns a pointer to the
     wide character directly following the last non-null wide character
     which was copied last.  Note that in this case there is no null
     terminator written into WTO.

     If the length of WFROM is less than SIZE, then `wcpncpy' copies
     all of WFROM, followed by enough null wide characters to add up to
     SIZE wide characters in all.  This behavior is rarely useful, but
     it is implemented to be useful in contexts where this behavior of
     the `wcsncpy' is used.  `wcpncpy' returns a pointer to the _first_
     written null wide character.

     This function is not part of ISO or POSIX but was found useful
     while developing the GNU C Library itself.

     Its behavior is undefined if the strings overlap.

     As noted below, this function is generally a poor choice for
     processing text.

     `wcpncpy' is a GNU extension.

 -- Function: char * strncat (char *restrict TO, const char *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is like `strcat' except that not more than SIZE
     bytes from FROM are appended to the end of TO, and FROM need not
     be null-terminated.  A single null byte is also always appended to
     TO, so the total allocated size of TO must be at least `SIZE + 1'
     bytes longer than its initial length.

     The `strncat' function could be implemented like this:

          char *
          strncat (char *to, const char *from, size_t size)
          {
            size_t len = strlen (to);
            memcpy (to + len, from, strnlen (from, size));
            to[len + strnlen (from, size)] = '\0';
            return to;
          }

     The behavior of `strncat' is undefined if the strings overlap.

     As a companion to `strncpy', `strncat' was designed for
     now-rarely-used arrays consisting of non-null bytes followed by
     zero or more null bytes.  As noted below, this function is
     generally a poor choice for processing text.  Also, this function
     has significant performance issues.  *Note Concatenating Strings::.

 -- Function: wchar_t * wcsncat (wchar_t *restrict WTO, const wchar_t
          *restrict WFROM, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is like `wcscat' except that not more than SIZE wide
     characters from FROM are appended to the end of TO, and FROM need
     not be null-terminated.  A single null wide character is also
     always appended to TO, so the total allocated size of TO must be
     at least `wcsnlen (WFROM, SIZE) + 1' wide characters longer than
     its initial length.

     The `wcsncat' function could be implemented like this:

          wchar_t *
          wcsncat (wchar_t *restrict wto, const wchar_t *restrict wfrom,
                   size_t size)
          {
            size_t len = wcslen (wto);
            memcpy (wto + len, wfrom, wcsnlen (wfrom, size) * sizeof (wchar_t));
            wto[len + wcsnlen (wfrom, size)] = L'\0';
            return wto;
          }

     The behavior of `wcsncat' is undefined if the strings overlap.

     As noted below, this function is generally a poor choice for
     processing text.  Also, this function has significant performance
     issues.  *Note Concatenating Strings::.

   Because these functions can abruptly truncate strings or wide
strings, they are generally poor choices for processing text.  When
coping or concatening multibyte strings, they can truncate within a
multibyte character so that the result is not a valid multibyte string.
When combining or concatenating multibyte or wide strings, they may
truncate the output after a combining character, resulting in a
corrupted grapheme.  They can cause bugs even when processing
single-byte strings: for example, when calculating an ASCII-only user
name, a truncated name can identify the wrong user.

   Although some buffer overruns can be prevented by manually replacing
calls to copying functions with calls to truncation functions, there
are often easier and safer automatic techniques that cause buffer
overruns to reliably terminate a program, such as GCC's
`-fcheck-pointer-bounds' and `-fsanitize=address' options.  *Note
Options for Debugging Your Program or GCC: (gcc)Debugging Options.
Because truncation functions can mask application bugs that would
otherwise be caught by the automatic techniques, these functions should
be used only when the application's underlying logic requires
truncation.

   *Note_* GNU programs should not truncate strings or wide strings to
fit arbitrary size limits.  *Note Writing Robust Programs:
(standards)Semantics.  Instead of string-truncation functions, it is
usually better to use dynamic memory allocation (*note Unconstrained
Allocation::) and functions such as `strdup' or `asprintf' to construct
strings.


File: libc.info,  Node: String/Array Comparison,  Next: Collation Functions,  Prev: Truncating Strings,  Up: String and Array Utilities

5.7 String/Array Comparison
===========================

You can use the functions in this section to perform comparisons on the
contents of strings and arrays.  As well as checking for equality, these
functions can also be used as the ordering functions for sorting
operations.  *Note Searching and Sorting::, for an example of this.

   Unlike most comparison operations in C, the string comparison
functions return a nonzero value if the strings are _not_ equivalent
rather than if they are.  The sign of the value indicates the relative
ordering of the first part of the strings that are not equivalent:  a
negative value indicates that the first string is "less" than the
second, while a positive value indicates that the first string is
"greater".

   The most common use of these functions is to check only for equality.
This is canonically done with an expression like `! strcmp (s1, s2)'.

   All of these functions are declared in the header file `string.h'.  

 -- Function: int memcmp (const void *A1, const void *A2, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function `memcmp' compares the SIZE bytes of memory beginning
     at A1 against the SIZE bytes of memory beginning at A2.  The value
     returned has the same sign as the difference between the first
     differing pair of bytes (interpreted as `unsigned char' objects,
     then promoted to `int').

     If the contents of the two blocks are equal, `memcmp' returns `0'.

 -- Function: int wmemcmp (const wchar_t *A1, const wchar_t *A2, size_t
          SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function `wmemcmp' compares the SIZE wide characters beginning
     at A1 against the SIZE wide characters beginning at A2.  The value
     returned is smaller than or larger than zero depending on whether
     the first differing wide character is A1 is smaller or larger than
     the corresponding wide character in A2.

     If the contents of the two blocks are equal, `wmemcmp' returns `0'.

   On arbitrary arrays, the `memcmp' function is mostly useful for
testing equality.  It usually isn't meaningful to do byte-wise ordering
comparisons on arrays of things other than bytes.  For example, a
byte-wise comparison on the bytes that make up floating-point numbers
isn't likely to tell you anything about the relationship between the
values of the floating-point numbers.

   `wmemcmp' is really only useful to compare arrays of type `wchar_t'
since the function looks at `sizeof (wchar_t)' bytes at a time and this
number of bytes is system dependent.

   You should also be careful about using `memcmp' to compare objects
that can contain "holes", such as the padding inserted into structure
objects to enforce alignment requirements, extra space at the end of
unions, and extra bytes at the ends of strings whose length is less
than their allocated size.  The contents of these "holes" are
indeterminate and may cause strange behavior when performing byte-wise
comparisons.  For more predictable results, perform an explicit
component-wise comparison.

   For example, given a structure type definition like:

     struct foo
       {
         unsigned char tag;
         union
           {
             double f;
             long i;
             char *p;
           } value;
       };

you are better off writing a specialized comparison function to compare
`struct foo' objects instead of comparing them with `memcmp'.

 -- Function: int strcmp (const char *S1, const char *S2)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `strcmp' function compares the string S1 against S2, returning
     a value that has the same sign as the difference between the first
     differing pair of bytes (interpreted as `unsigned char' objects,
     then promoted to `int').

     If the two strings are equal, `strcmp' returns `0'.

     A consequence of the ordering used by `strcmp' is that if S1 is an
     initial substring of S2, then S1 is considered to be "less than"
     S2.

     `strcmp' does not take sorting conventions of the language the
     strings are written in into account.  To get that one has to use
     `strcoll'.

 -- Function: int wcscmp (const wchar_t *WS1, const wchar_t *WS2)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `wcscmp' function compares the wide string WS1 against WS2.
     The value returned is smaller than or larger than zero depending
     on whether the first differing wide character is WS1 is smaller or
     larger than the corresponding wide character in WS2.

     If the two strings are equal, `wcscmp' returns `0'.

     A consequence of the ordering used by `wcscmp' is that if WS1 is
     an initial substring of WS2, then WS1 is considered to be "less
     than" WS2.

     `wcscmp' does not take sorting conventions of the language the
     strings are written in into account.  To get that one has to use
     `wcscoll'.

 -- Function: int strcasecmp (const char *S1, const char *S2)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function is like `strcmp', except that differences in case are
     ignored, and its arguments must be multibyte strings.  How
     uppercase and lowercase characters are related is determined by
     the currently selected locale.  In the standard `"C"' locale the
     characters A" and a" do not match but in a locale which regards
     these characters as parts of the alphabet they do match.

     `strcasecmp' is derived from BSD.

 -- Function: int wcscasecmp (const wchar_t *WS1, const wchar_t *WS2)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function is like `wcscmp', except that differences in case are
     ignored.  How uppercase and lowercase characters are related is
     determined by the currently selected locale.  In the standard `"C"'
     locale the characters A" and a" do not match but in a locale which
     regards these characters as parts of the alphabet they do match.

     `wcscasecmp' is a GNU extension.

 -- Function: int strncmp (const char *S1, const char *S2, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is the similar to `strcmp', except that no more than
     SIZE bytes are compared.  In other words, if the two strings are
     the same in their first SIZE bytes, the return value is zero.

 -- Function: int wcsncmp (const wchar_t *WS1, const wchar_t *WS2,
          size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to `wcscmp', except that no more than
     SIZE wide characters are compared.  In other words, if the two
     strings are the same in their first SIZE wide characters, the
     return value is zero.

 -- Function: int strncasecmp (const char *S1, const char *S2, size_t N)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function is like `strncmp', except that differences in case
     are ignored, and the compared parts of the arguments should
     consist of valid multibyte characters.  Like `strcasecmp', it is
     locale dependent how uppercase and lowercase characters are
     related.

     `strncasecmp' is a GNU extension.

 -- Function: int wcsncasecmp (const wchar_t *WS1, const wchar_t *S2,
          size_t N)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This function is like `wcsncmp', except that differences in case
     are ignored.  Like `wcscasecmp', it is locale dependent how
     uppercase and lowercase characters are related.

     `wcsncasecmp' is a GNU extension.

   Here are some examples showing the use of `strcmp' and `strncmp'
(equivalent examples can be constructed for the wide character
functions).  These examples assume the use of the ASCII character set.
(If some other character set--say, EBCDIC--is used instead, then the
glyphs are associated with different numeric codes, and the return
values and ordering may differ.)

     strcmp ("hello", "hello")
         => 0    /* These two strings are the same. */
     strcmp ("hello", "Hello")
         => 32   /* Comparisons are case-sensitive. */
     strcmp ("hello", "world")
         => -15  /* The byte `'h'' comes before `'w''. */
     strcmp ("hello", "hello, world")
         => -44  /* Comparing a null byte against a comma. */
     strncmp ("hello", "hello, world", 5)
         => 0    /* The initial 5 bytes are the same. */
     strncmp ("hello, world", "hello, stupid world!!!", 5)
         => 0    /* The initial 5 bytes are the same. */

 -- Function: int strverscmp (const char *S1, const char *S2)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     The `strverscmp' function compares the string S1 against S2,
     considering them as holding indices/version numbers.  The return
     value follows the same conventions as found in the `strcmp'
     function.  In fact, if S1 and S2 contain no digits, `strverscmp'
     behaves like `strcmp' (in the sense that the sign of the result is
     the same).

     The comparison algorithm which the `strverscmp' function implements
     differs slightly from other version-comparison algorithms.  The
     implementation is based on a finite-state machine, whose behavior
     is approximated below.

        * The input strings are each split into sequences of non-digits
          and digits.  These sequences can be empty at the beginning
          and end of the string.  Digits are determined by the
          `isdigit' function and are thus subject to the current locale.

        * Comparison starts with a (possibly empty) non-digit sequence.
          The first non-equal sequences of non-digits or digits
          determines the outcome of the comparison.

        * Corresponding non-digit sequences in both strings are compared
          lexicographically if their lengths are equal.  If the lengths
          differ, the shorter non-digit sequence is extended with the
          input string character immediately following it (which may be
          the null terminator), the other sequence is truncated to be
          of the same (extended) length, and these two sequences are
          compared lexicographically.  In the last case, the sequence
          comparison determines the result of the function because the
          extension character (or some character before it) is
          necessarily different from the character at the same offset
          in the other input string.

        * For two sequences of digits, the number of leading zeros is
          counted (which can be zero).  If the count differs, the
          string with more leading zeros in the digit sequence is
          considered smaller than the other string.

        * If the two sequences of digits have no leading zeros, they
          are compared as integers, that is, the string with the longer
          digit sequence is deemed larger, and if both sequences are of
          equal length, they are compared lexicographically.

        * If both digit sequences start with a zero and have an equal
          number of leading zeros, they are compared lexicographically
          if their lengths are the same.  If the lengths differ, the
          shorter sequence is extended with the following character in
          its input string, and the other sequence is truncated to the
          same length, and both sequences are compared
          lexicographically (similar to the non-digit sequence case
          above).

     The treatment of leading zeros and the tie-breaking extension
     characters (which in effect propagate across non-digit/digit
     sequence boundaries) differs from other version-comparison
     algorithms.

          strverscmp ("no digit", "no digit")
              => 0    /* same behavior as strcmp. */
          strverscmp ("item#99", "item#100")
              => <0   /* same prefix, but 99 < 100. */
          strverscmp ("alpha1", "alpha001")
              => >0   /* different number of leading zeros (0 and 2). */
          strverscmp ("part1_f012", "part1_f01")
              => >0   /* lexicographical comparison with leading zeros. */
          strverscmp ("foo.009", "foo.0")
              => <0   /* different number of leading zeros (2 and 1). */

     `strverscmp' is a GNU extension.

 -- Function: int bcmp (const void *A1, const void *A2, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is an obsolete alias for `memcmp', derived from BSD.


File: libc.info,  Node: Collation Functions,  Next: Search Functions,  Prev: String/Array Comparison,  Up: String and Array Utilities

5.8 Collation Functions
=======================

In some locales, the conventions for lexicographic ordering differ from
the strict numeric ordering of character codes.  For example, in Spanish
most glyphs with diacritical marks such as accents are not considered
distinct letters for the purposes of collation.  On the other hand, the
two-character sequence `ll' is treated as a single letter that is
collated immediately after `l'.

   You can use the functions `strcoll' and `strxfrm' (declared in the
headers file `string.h') and `wcscoll' and `wcsxfrm' (declared in the
headers file `wchar') to compare strings using a collation ordering
appropriate for the current locale.  The locale used by these functions
in particular can be specified by setting the locale for the
`LC_COLLATE' category; see *Note Locales::.  

   In the standard C locale, the collation sequence for `strcoll' is
the same as that for `strcmp'.  Similarly, `wcscoll' and `wcscmp' are
the same in this situation.

   Effectively, the way these functions work is by applying a mapping to
transform the characters in a multibyte string to a byte sequence that
represents the string's position in the collating sequence of the
current locale.  Comparing two such byte sequences in a simple fashion
is equivalent to comparing the strings with the locale's collating
sequence.

   The functions `strcoll' and `wcscoll' perform this translation
implicitly, in order to do one comparison.  By contrast, `strxfrm' and
`wcsxfrm' perform the mapping explicitly.  If you are making multiple
comparisons using the same string or set of strings, it is likely to be
more efficient to use `strxfrm' or `wcsxfrm' to transform all the
strings just once, and subsequently compare the transformed strings
with `strcmp' or `wcscmp'.

 -- Function: int strcoll (const char *S1, const char *S2)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     The `strcoll' function is similar to `strcmp' but uses the
     collating sequence of the current locale for collation (the
     `LC_COLLATE' locale).  The arguments are multibyte strings.

 -- Function: int wcscoll (const wchar_t *WS1, const wchar_t *WS2)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     The `wcscoll' function is similar to `wcscmp' but uses the
     collating sequence of the current locale for collation (the
     `LC_COLLATE' locale).

   Here is an example of sorting an array of strings, using `strcoll'
to compare them.  The actual sort algorithm is not written here; it
comes from `qsort' (*note Array Sort Function::).  The job of the code
shown here is to say how to compare the strings while sorting them.
(Later on in this section, we will show a way to do this more
efficiently using `strxfrm'.)

     /* This is the comparison function used with `qsort'. */

     int
     compare_elements (const void *v1, const void *v2)
     {
       char * const *p1 = v1;
       char * const *p2 = v2;

       return strcoll (*p1, *p2);
     }

     /* This is the entry point--the function to sort
        strings using the locale's collating sequence. */

     void
     sort_strings (char **array, int nstrings)
     {
       /* Sort `temp_array' by comparing the strings. */
       qsort (array, nstrings,
              sizeof (char *), compare_elements);
     }

 -- Function: size_t strxfrm (char *restrict TO, const char *restrict
          FROM, size_t SIZE)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     The function `strxfrm' transforms the multibyte string FROM using
     the collation transformation determined by the locale currently
     selected for collation, and stores the transformed string in the
     array TO.  Up to SIZE bytes (including a terminating null byte) are
     stored.

     The behavior is undefined if the strings TO and FROM overlap; see
     *Note Copying Strings and Arrays::.

     The return value is the length of the entire transformed string.
     This value is not affected by the value of SIZE, but if it is
     greater or equal than SIZE, it means that the transformed string
     did not entirely fit in the array TO.  In this case, only as much
     of the string as actually fits was stored.  To get the whole
     transformed string, call `strxfrm' again with a bigger output
     array.

     The transformed string may be longer than the original string, and
     it may also be shorter.

     If SIZE is zero, no bytes are stored in TO.  In this case,
     `strxfrm' simply returns the number of bytes that would be the
     length of the transformed string.  This is useful for determining
     what size the allocated array should be.  It does not matter what
     TO is if SIZE is zero; TO may even be a null pointer.

 -- Function: size_t wcsxfrm (wchar_t *restrict WTO, const wchar_t
          *WFROM, size_t SIZE)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     The function `wcsxfrm' transforms wide string WFROM using the
     collation transformation determined by the locale currently
     selected for collation, and stores the transformed string in the
     array WTO.  Up to SIZE wide characters (including a terminating
     null wide character) are stored.

     The behavior is undefined if the strings WTO and WFROM overlap;
     see *Note Copying Strings and Arrays::.

     The return value is the length of the entire transformed wide
     string.  This value is not affected by the value of SIZE, but if
     it is greater or equal than SIZE, it means that the transformed
     wide string did not entirely fit in the array WTO.  In this case,
     only as much of the wide string as actually fits was stored.  To
     get the whole transformed wide string, call `wcsxfrm' again with a
     bigger output array.

     The transformed wide string may be longer than the original wide
     string, and it may also be shorter.

     If SIZE is zero, no wide characters are stored in TO.  In this
     case, `wcsxfrm' simply returns the number of wide characters that
     would be the length of the transformed wide string.  This is
     useful for determining what size the allocated array should be
     (remember to multiply with `sizeof (wchar_t)').  It does not
     matter what WTO is if SIZE is zero; WTO may even be a null pointer.

   Here is an example of how you can use `strxfrm' when you plan to do
many comparisons.  It does the same thing as the previous example, but
much faster, because it has to transform each string only once, no
matter how many times it is compared with other strings.  Even the time
needed to allocate and free storage is much less than the time we save,
when there are many strings.

     struct sorter { char *input; char *transformed; };

     /* This is the comparison function used with `qsort'
        to sort an array of `struct sorter'. */

     int
     compare_elements (const void *v1, const void *v2)
     {
       const struct sorter *p1 = v1;
       const struct sorter *p2 = v2;

       return strcmp (p1->transformed, p2->transformed);
     }

     /* This is the entry point--the function to sort
        strings using the locale's collating sequence. */

     void
     sort_strings_fast (char **array, int nstrings)
     {
       struct sorter temp_array[nstrings];
       int i;

       /* Set up `temp_array'.  Each element contains
          one input string and its transformed string. */
       for (i = 0; i < nstrings; i++)
         {
           size_t length = strlen (array[i]) * 2;
           char *transformed;
           size_t transformed_length;

           temp_array[i].input = array[i];

           /* First try a buffer perhaps big enough.  */
           transformed = (char *) xmalloc (length);

           /* Transform `array[i]'.  */
           transformed_length = strxfrm (transformed, array[i], length);

           /* If the buffer was not large enough, resize it
              and try again.  */
           if (transformed_length >= length)
             {
               /* Allocate the needed space. +1 for terminating
                  `'\0'' byte.  */
               transformed = (char *) xrealloc (transformed,
                                                transformed_length + 1);

               /* The return value is not interesting because we know
                  how long the transformed string is.  */
               (void) strxfrm (transformed, array[i],
                               transformed_length + 1);
             }

           temp_array[i].transformed = transformed;
         }

       /* Sort `temp_array' by comparing transformed strings. */
       qsort (temp_array, nstrings,
              sizeof (struct sorter), compare_elements);

       /* Put the elements back in the permanent array
          in their sorted order. */
       for (i = 0; i < nstrings; i++)
         array[i] = temp_array[i].input;

       /* Free the strings we allocated. */
       for (i = 0; i < nstrings; i++)
         free (temp_array[i].transformed);
     }

   The interesting part of this code for the wide character version
would look like this:

     void
     sort_strings_fast (wchar_t **array, int nstrings)
     {
       ...
           /* Transform `array[i]'.  */
           transformed_length = wcsxfrm (transformed, array[i], length);

           /* If the buffer was not large enough, resize it
              and try again.  */
           if (transformed_length >= length)
             {
               /* Allocate the needed space. +1 for terminating
                  `L'\0'' wide character.  */
               transformed = (wchar_t *) xrealloc (transformed,
                                                   (transformed_length + 1)
                                                   * sizeof (wchar_t));

               /* The return value is not interesting because we know
                  how long the transformed string is.  */
               (void) wcsxfrm (transformed, array[i],
                               transformed_length + 1);
             }
       ...

Note the additional multiplication with `sizeof (wchar_t)' in the
`realloc' call.

   *Compatibility Note:* The string collation functions are a new
feature of ISO C90.  Older C dialects have no equivalent feature.  The
wide character versions were introduced in Amendment 1 to ISO C90.


File: libc.info,  Node: Search Functions,  Next: Finding Tokens in a String,  Prev: Collation Functions,  Up: String and Array Utilities

5.9 Search Functions
====================

This section describes library functions which perform various kinds of
searching operations on strings and arrays.  These functions are
declared in the header file `string.h'.  

 -- Function: void * memchr (const void *BLOCK, int C, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function finds the first occurrence of the byte C (converted
     to an `unsigned char') in the initial SIZE bytes of the object
     beginning at BLOCK.  The return value is a pointer to the located
     byte, or a null pointer if no match was found.

 -- Function: wchar_t * wmemchr (const wchar_t *BLOCK, wchar_t WC,
          size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function finds the first occurrence of the wide character WC
     in the initial SIZE wide characters of the object beginning at
     BLOCK.  The return value is a pointer to the located wide
     character, or a null pointer if no match was found.

 -- Function: void * rawmemchr (const void *BLOCK, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Often the `memchr' function is used with the knowledge that the
     byte C is available in the memory block specified by the
     parameters.  But this means that the SIZE parameter is not really
     needed and that the tests performed with it at runtime (to check
     whether the end of the block is reached) are not needed.

     The `rawmemchr' function exists for just this situation which is
     surprisingly frequent.  The interface is similar to `memchr' except
     that the SIZE parameter is missing.  The function will look beyond
     the end of the block pointed to by BLOCK in case the programmer
     made an error in assuming that the byte C is present in the block.
     In this case the result is unspecified.  Otherwise the return
     value is a pointer to the located byte.

     This function is of special interest when looking for the end of a
     string.  Since all strings are terminated by a null byte a call
     like

             rawmemchr (str, '\0')

     will never go beyond the end of the string.

     This function is a GNU extension.

 -- Function: void * memrchr (const void *BLOCK, int C, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function `memrchr' is like `memchr', except that it searches
     backwards from the end of the block defined by BLOCK and SIZE
     (instead of forwards from the front).

     This function is a GNU extension.

 -- Function: char * strchr (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `strchr' function finds the first occurrence of the byte C
     (converted to a `char') in the string beginning at STRING.  The
     return value is a pointer to the located byte, or a null pointer
     if no match was found.

     For example,
          strchr ("hello, world", 'l')
              => "llo, world"
          strchr ("hello, world", '?')
              => NULL

     The terminating null byte is considered to be part of the string,
     so you can use this function get a pointer to the end of a string
     by specifying zero as the value of the C argument.

     When `strchr' returns a null pointer, it does not let you know the
     position of the terminating null byte it has found.  If you need
     that information, it is better (but less portable) to use
     `strchrnul' than to search for it a second time.

 -- Function: wchar_t * wcschr (const wchar_t *WSTRING, int WC)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `wcschr' function finds the first occurrence of the wide
     character WC in the wide string beginning at WSTRING.  The return
     value is a pointer to the located wide character, or a null
     pointer if no match was found.

     The terminating null wide character is considered to be part of
     the wide string, so you can use this function get a pointer to the
     end of a wide string by specifying a null wide character as the
     value of the WC argument.  It would be better (but less portable)
     to use `wcschrnul' in this case, though.

 -- Function: char * strchrnul (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `strchrnul' is the same as `strchr' except that if it does not
     find the byte, it returns a pointer to string's terminating null
     byte rather than a null pointer.

     This function is a GNU extension.

 -- Function: wchar_t * wcschrnul (const wchar_t *WSTRING, wchar_t WC)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `wcschrnul' is the same as `wcschr' except that if it does not
     find the wide character, it returns a pointer to the wide string's
     terminating null wide character rather than a null pointer.

     This function is a GNU extension.

   One useful, but unusual, use of the `strchr' function is when one
wants to have a pointer pointing to the null byte terminating a string.
This is often written in this way:

       s += strlen (s);

This is almost optimal but the addition operation duplicated a bit of
the work already done in the `strlen' function.  A better solution is
this:

       s = strchr (s, '\0');

   There is no restriction on the second parameter of `strchr' so it
could very well also be zero.  Those readers thinking very hard about
this might now point out that the `strchr' function is more expensive
than the `strlen' function since we have two abort criteria.  This is
right.  But in the GNU C Library the implementation of `strchr' is
optimized in a special way so that `strchr' actually is faster.

 -- Function: char * strrchr (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function `strrchr' is like `strchr', except that it searches
     backwards from the end of the string STRING (instead of forwards
     from the front).

     For example,
          strrchr ("hello, world", 'l')
              => "ld"

 -- Function: wchar_t * wcsrchr (const wchar_t *WSTRING, wchar_t C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function `wcsrchr' is like `wcschr', except that it searches
     backwards from the end of the string WSTRING (instead of forwards
     from the front).

 -- Function: char * strstr (const char *HAYSTACK, const char *NEEDLE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is like `strchr', except that it searches HAYSTACK for a
     substring NEEDLE rather than just a single byte.  It returns a
     pointer into the string HAYSTACK that is the first byte of the
     substring, or a null pointer if no match was found.  If NEEDLE is
     an empty string, the function returns HAYSTACK.

     For example,
          strstr ("hello, world", "l")
              => "llo, world"
          strstr ("hello, world", "wo")
              => "world"

 -- Function: wchar_t * wcsstr (const wchar_t *HAYSTACK, const wchar_t
          *NEEDLE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is like `wcschr', except that it searches HAYSTACK for a
     substring NEEDLE rather than just a single wide character.  It
     returns a pointer into the string HAYSTACK that is the first wide
     character of the substring, or a null pointer if no match was
     found.  If NEEDLE is an empty string, the function returns
     HAYSTACK.

 -- Function: wchar_t * wcswcs (const wchar_t *HAYSTACK, const wchar_t
          *NEEDLE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `wcswcs' is a deprecated alias for `wcsstr'.  This is the name
     originally used in the X/Open Portability Guide before the
     Amendment 1 to ISO C90 was published.

 -- Function: char * strcasestr (const char *HAYSTACK, const char
          *NEEDLE)
     Preliminary: | MT-Safe locale | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This is like `strstr', except that it ignores case in searching for
     the substring.   Like `strcasecmp', it is locale dependent how
     uppercase and lowercase characters are related, and arguments are
     multibyte strings.

     For example,
          strcasestr ("hello, world", "L")
              => "llo, world"
          strcasestr ("hello, World", "wo")
              => "World"

 -- Function: void * memmem (const void *HAYSTACK, size_t HAYSTACK-LEN,
          const void *NEEDLE, size_t NEEDLE-LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is like `strstr', but NEEDLE and HAYSTACK are byte arrays
     rather than strings.  NEEDLE-LEN is the length of NEEDLE and
     HAYSTACK-LEN is the length of HAYSTACK.

     This function is a GNU extension.

 -- Function: size_t strspn (const char *STRING, const char *SKIPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `strspn' ("string span") function returns the length of the
     initial substring of STRING that consists entirely of bytes that
     are members of the set specified by the string SKIPSET.  The order
     of the bytes in SKIPSET is not important.

     For example,
          strspn ("hello, world", "abcdefghijklmnopqrstuvwxyz")
              => 5

     In a multibyte string, characters consisting of more than one byte
     are not treated as single entities.  Each byte is treated
     separately.  The function is not locale-dependent.

 -- Function: size_t wcsspn (const wchar_t *WSTRING, const wchar_t
          *SKIPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `wcsspn' ("wide character string span") function returns the
     length of the initial substring of WSTRING that consists entirely
     of wide characters that are members of the set specified by the
     string SKIPSET.  The order of the wide characters in SKIPSET is not
     important.

 -- Function: size_t strcspn (const char *STRING, const char *STOPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `strcspn' ("string complement span") function returns the
     length of the initial substring of STRING that consists entirely
     of bytes that are _not_ members of the set specified by the string
     STOPSET.  (In other words, it returns the offset of the first byte
     in STRING that is a member of the set STOPSET.)

     For example,
          strcspn ("hello, world", " \t\n,.;!?")
              => 5

     In a multibyte string, characters consisting of more than one byte
     are not treated as a single entities.  Each byte is treated
     separately.  The function is not locale-dependent.

 -- Function: size_t wcscspn (const wchar_t *WSTRING, const wchar_t
          *STOPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `wcscspn' ("wide character string complement span") function
     returns the length of the initial substring of WSTRING that
     consists entirely of wide characters that are _not_ members of the
     set specified by the string STOPSET.  (In other words, it returns
     the offset of the first wide character in STRING that is a member
     of the set STOPSET.)

 -- Function: char * strpbrk (const char *STRING, const char *STOPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `strpbrk' ("string pointer break") function is related to
     `strcspn', except that it returns a pointer to the first byte in
     STRING that is a member of the set STOPSET instead of the length
     of the initial substring.  It returns a null pointer if no such
     byte from STOPSET is found.

     For example,

          strpbrk ("hello, world", " \t\n,.;!?")
              => ", world"

     In a multibyte string, characters consisting of more than one byte
     are not treated as single entities.  Each byte is treated
     separately.  The function is not locale-dependent.

 -- Function: wchar_t * wcspbrk (const wchar_t *WSTRING, const wchar_t
          *STOPSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `wcspbrk' ("wide character string pointer break") function is
     related to `wcscspn', except that it returns a pointer to the first
     wide character in WSTRING that is a member of the set STOPSET
     instead of the length of the initial substring.  It returns a null
     pointer if no such wide character from STOPSET is found.

5.9.1 Compatibility String Search Functions
-------------------------------------------

 -- Function: char * index (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `index' is another name for `strchr'; they are exactly the same.
     New code should always use `strchr' since this name is defined in
     ISO C while `index' is a BSD invention which never was available
     on System V derived systems.

 -- Function: char * rindex (const char *STRING, int C)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `rindex' is another name for `strrchr'; they are exactly the same.
     New code should always use `strrchr' since this name is defined in
     ISO C while `rindex' is a BSD invention which never was available
     on System V derived systems.


File: libc.info,  Node: Finding Tokens in a String,  Next: Erasing Sensitive Data,  Prev: Search Functions,  Up: String and Array Utilities

5.10 Finding Tokens in a String
===============================

It's fairly common for programs to have a need to do some simple kinds
of lexical analysis and parsing, such as splitting a command string up
into tokens.  You can do this with the `strtok' function, declared in
the header file `string.h'.  

 -- Function: char * strtok (char *restrict NEWSTRING, const char
          *restrict DELIMITERS)
     Preliminary: | MT-Unsafe race:strtok | AS-Unsafe | AC-Safe | *Note
     POSIX Safety Concepts::.

     A string can be split into tokens by making a series of calls to
     the function `strtok'.

     The string to be split up is passed as the NEWSTRING argument on
     the first call only.  The `strtok' function uses this to set up
     some internal state information.  Subsequent calls to get
     additional tokens from the same string are indicated by passing a
     null pointer as the NEWSTRING argument.  Calling `strtok' with
     another non-null NEWSTRING argument reinitializes the state
     information.  It is guaranteed that no other library function ever
     calls `strtok' behind your back (which would mess up this internal
     state information).

     The DELIMITERS argument is a string that specifies a set of
     delimiters that may surround the token being extracted.  All the
     initial bytes that are members of this set are discarded.  The
     first byte that is _not_ a member of this set of delimiters marks
     the beginning of the next token.  The end of the token is found by
     looking for the next byte that is a member of the delimiter set.
     This byte in the original string NEWSTRING is overwritten by a
     null byte, and the pointer to the beginning of the token in
     NEWSTRING is returned.

     On the next call to `strtok', the searching begins at the next
     byte beyond the one that marked the end of the previous token.
     Note that the set of delimiters DELIMITERS do not have to be the
     same on every call in a series of calls to `strtok'.

     If the end of the string NEWSTRING is reached, or if the remainder
     of string consists only of delimiter bytes, `strtok' returns a
     null pointer.

     In a multibyte string, characters consisting of more than one byte
     are not treated as single entities.  Each byte is treated
     separately.  The function is not locale-dependent.

 -- Function: wchar_t * wcstok (wchar_t *NEWSTRING, const wchar_t
          *DELIMITERS, wchar_t **SAVE_PTR)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     A string can be split into tokens by making a series of calls to
     the function `wcstok'.

     The string to be split up is passed as the NEWSTRING argument on
     the first call only.  The `wcstok' function uses this to set up
     some internal state information.  Subsequent calls to get
     additional tokens from the same wide string are indicated by
     passing a null pointer as the NEWSTRING argument, which causes the
     pointer previously stored in SAVE_PTR to be used instead.

     The DELIMITERS argument is a wide string that specifies a set of
     delimiters that may surround the token being extracted.  All the
     initial wide characters that are members of this set are discarded.
     The first wide character that is _not_ a member of this set of
     delimiters marks the beginning of the next token.  The end of the
     token is found by looking for the next wide character that is a
     member of the delimiter set.  This wide character in the original
     wide string NEWSTRING is overwritten by a null wide character, the
     pointer past the overwritten wide character is saved in SAVE_PTR,
     and the pointer to the beginning of the token in NEWSTRING is
     returned.

     On the next call to `wcstok', the searching begins at the next
     wide character beyond the one that marked the end of the previous
     token.  Note that the set of delimiters DELIMITERS do not have to
     be the same on every call in a series of calls to `wcstok'.

     If the end of the wide string NEWSTRING is reached, or if the
     remainder of string consists only of delimiter wide characters,
     `wcstok' returns a null pointer.

   *Warning:* Since `strtok' and `wcstok' alter the string they is
parsing, you should always copy the string to a temporary buffer before
parsing it with `strtok'/`wcstok' (*note Copying Strings and Arrays::).
If you allow `strtok' or `wcstok' to modify a string that came from
another part of your program, you are asking for trouble; that string
might be used for other purposes after `strtok' or `wcstok' has
modified it, and it would not have the expected value.

   The string that you are operating on might even be a constant.  Then
when `strtok' or `wcstok' tries to modify it, your program will get a
fatal signal for writing in read-only memory.  *Note Program Error
Signals::.  Even if the operation of `strtok' or `wcstok' would not
require a modification of the string (e.g., if there is exactly one
token) the string can (and in the GNU C Library case will) be modified.

   This is a special case of a general principle: if a part of a program
does not have as its purpose the modification of a certain data
structure, then it is error-prone to modify the data structure
temporarily.

   The function `strtok' is not reentrant, whereas `wcstok' is.  *Note
Nonreentrancy::, for a discussion of where and why reentrancy is
important.

   Here is a simple example showing the use of `strtok'.

     #include <string.h>
     #include <stddef.h>

     ...

     const char string[] = "words separated by spaces -- and, punctuation!";
     const char delimiters[] = " .,;:!-";
     char *token, *cp;

     ...

     cp = strdupa (string);                /* Make writable copy.  */
     token = strtok (cp, delimiters);      /* token => "words" */
     token = strtok (NULL, delimiters);    /* token => "separated" */
     token = strtok (NULL, delimiters);    /* token => "by" */
     token = strtok (NULL, delimiters);    /* token => "spaces" */
     token = strtok (NULL, delimiters);    /* token => "and" */
     token = strtok (NULL, delimiters);    /* token => "punctuation" */
     token = strtok (NULL, delimiters);    /* token => NULL */

   The GNU C Library contains two more functions for tokenizing a string
which overcome the limitation of non-reentrancy.  They are not
available available for wide strings.

 -- Function: char * strtok_r (char *NEWSTRING, const char *DELIMITERS,
          char **SAVE_PTR)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Just like `strtok', this function splits the string into several
     tokens which can be accessed by successive calls to `strtok_r'.
     The difference is that, as in `wcstok', the information about the
     next token is stored in the space pointed to by the third argument,
     SAVE_PTR, which is a pointer to a string pointer.  Calling
     `strtok_r' with a null pointer for NEWSTRING and leaving SAVE_PTR
     between the calls unchanged does the job without hindering
     reentrancy.

     This function is defined in POSIX.1 and can be found on many
     systems which support multi-threading.

 -- Function: char * strsep (char **STRING_PTR, const char *DELIMITER)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function has a similar functionality as `strtok_r' with the
     NEWSTRING argument replaced by the SAVE_PTR argument.  The
     initialization of the moving pointer has to be done by the user.
     Successive calls to `strsep' move the pointer along the tokens
     separated by DELIMITER, returning the address of the next token
     and updating STRING_PTR to point to the beginning of the next
     token.

     One difference between `strsep' and `strtok_r' is that if the
     input string contains more than one byte from DELIMITER in a row
     `strsep' returns an empty string for each pair of bytes from
     DELIMITER.  This means that a program normally should test for
     `strsep' returning an empty string before processing it.

     This function was introduced in 4.3BSD and therefore is widely
     available.

   Here is how the above example looks like when `strsep' is used.

     #include <string.h>
     #include <stddef.h>

     ...

     const char string[] = "words separated by spaces -- and, punctuation!";
     const char delimiters[] = " .,;:!-";
     char *running;
     char *token;

     ...

     running = strdupa (string);
     token = strsep (&running, delimiters);    /* token => "words" */
     token = strsep (&running, delimiters);    /* token => "separated" */
     token = strsep (&running, delimiters);    /* token => "by" */
     token = strsep (&running, delimiters);    /* token => "spaces" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => "and" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => "punctuation" */
     token = strsep (&running, delimiters);    /* token => "" */
     token = strsep (&running, delimiters);    /* token => NULL */

 -- Function: char * basename (const char *FILENAME)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The GNU version of the `basename' function returns the last
     component of the path in FILENAME.  This function is the preferred
     usage, since it does not modify the argument, FILENAME, and
     respects trailing slashes.  The prototype for `basename' can be
     found in `string.h'.  Note, this function is overridden by the XPG
     version, if `libgen.h' is included.

     Example of using GNU `basename':

          #include <string.h>

          int
          main (int argc, char *argv[])
          {
            char *prog = basename (argv[0]);

            if (argc < 2)
              {
                fprintf (stderr, "Usage %s <arg>\n", prog);
                exit (1);
              }

            ...
          }

     *Portability Note:* This function may produce different results on
     different systems.


 -- Function: char * basename (char *PATH)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This is the standard XPG defined `basename'.  It is similar in
     spirit to the GNU version, but may modify the PATH by removing
     trailing '/' bytes.  If the PATH is made up entirely of '/' bytes,
     then "/" will be returned.  Also, if PATH is `NULL' or an empty
     string, then "." is returned.  The prototype for the XPG version
     can be found in `libgen.h'.

     Example of using XPG `basename':

          #include <libgen.h>

          int
          main (int argc, char *argv[])
          {
            char *prog;
            char *path = strdupa (argv[0]);

            prog = basename (path);

            if (argc < 2)
              {
                fprintf (stderr, "Usage %s <arg>\n", prog);
                exit (1);
              }

            ...

          }

 -- Function: char * dirname (char *PATH)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `dirname' function is the compliment to the XPG version of
     `basename'.  It returns the parent directory of the file specified
     by PATH.  If PATH is `NULL', an empty string, or contains no '/'
     bytes, then "." is returned.  The prototype for this function can
     be found in `libgen.h'.


File: libc.info,  Node: Erasing Sensitive Data,  Next: Shuffling Bytes,  Prev: Finding Tokens in a String,  Up: String and Array Utilities

5.11 Erasing Sensitive Data
===========================

Sensitive data, such as cryptographic keys, should be erased from
memory after use, to reduce the risk that a bug will expose it to the
outside world.  However, compiler optimizations may determine that an
erasure operation is "unnecessary," and remove it from the generated
code, because no _correct_ program could access the variable or heap
object containing the sensitive data after it's deallocated.  Since
erasure is a precaution against bugs, this optimization is
inappropriate.

   The function `explicit_bzero' erases a block of memory, and
guarantees that the compiler will not remove the erasure as
"unnecessary."

     #include <string.h>

     extern void encrypt (const char *key, const char *in,
                          char *out, size_t n);
     extern void genkey (const char *phrase, char *key);

     void encrypt_with_phrase (const char *phrase, const char *in,
                               char *out, size_t n)
     {
       char key[16];
       genkey (phrase, key);
       encrypt (key, in, out, n);
       explicit_bzero (key, 16);
     }

In this example, if `memset', `bzero', or a hand-written loop had been
used, the compiler might remove them as "unnecessary."

   *Warning:* `explicit_bzero' does not guarantee that sensitive data
is _completely_ erased from the computer's memory.  There may be copies
in temporary storage areas, such as registers and "scratch" stack
space; since these are invisible to the source code, a library function
cannot erase them.

   Also, `explicit_bzero' only operates on RAM.  If a sensitive data
object never needs to have its address taken other than to call
`explicit_bzero', it might be stored entirely in CPU registers _until_
the call to `explicit_bzero'.  Then it will be copied into RAM, the
copy will be erased, and the original will remain intact.  Data in RAM
is more likely to be exposed by a bug than data in registers, so this
creates a brief window where the data is at greater risk of exposure
than it would have been if the program didn't try to erase it at all.

   Declaring sensitive variables as `volatile' will make both the above
problems _worse_; a `volatile' variable will be stored in memory for
its entire lifetime, and the compiler will make _more_ copies of it
than it would otherwise have.  Attempting to erase a normal variable
"by hand" through a `volatile'-qualified pointer doesn't work at
all--because the variable itself is not `volatile', some compilers will
ignore the qualification on the pointer and remove the erasure anyway.

   Having said all that, in most situations, using `explicit_bzero' is
better than not using it.  At present, the only way to do a more
thorough job is to write the entire sensitive operation in assembly
language.  We anticipate that future compilers will recognize calls to
`explicit_bzero' and take appropriate steps to erase all the copies of
the affected data, whereever they may be.

 -- Function: void explicit_bzero (void *BLOCK, size_t LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `explicit_bzero' writes zero into LEN bytes of memory beginning at
     BLOCK, just as `bzero' would.  The zeroes are always written, even
     if the compiler could determine that this is "unnecessary" because
     no correct program could read them back.

     *Note_* The _only_ optimization that `explicit_bzero' disables is
     removal of "unnecessary" writes to memory.  The compiler can
     perform all the other optimizations that it could for a call to
     `memset'.  For instance, it may replace the function call with
     inline memory writes, and it may assume that BLOCK cannot be a
     null pointer.

     *Portability Note:* This function first appeared in OpenBSD 5.5
     and has not been standardized.  Other systems may provide the same
     functionality under a different name, such as `explicit_memset',
     `memset_s', or `SecureZeroMemory'.

     The GNU C Library declares this function in `string.h', but on
     other systems it may be in `strings.h' instead.


File: libc.info,  Node: Shuffling Bytes,  Next: Obfuscating Data,  Prev: Erasing Sensitive Data,  Up: String and Array Utilities

5.12 Shuffling Bytes
====================

The function below addresses the perennial programming quandary: "How do
I take good data in string form and painlessly turn it into garbage?"
This is not a difficult thing to code for oneself, but the authors of
the GNU C Library wish to make it as convenient as possible.

   To _erase_ data, use `explicit_bzero' (*note Erasing Sensitive
Data::); to obfuscate it reversibly, use `memfrob' (*note Obfuscating
Data::).

 -- Function: char * strfry (char *STRING)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     `strfry' performs an in-place shuffle on STRING.  Each character
     is swapped to a position selected at random, within the portion of
     the string starting with the character's original position.  (This
     is the Fisher-Yates algorithm for unbiased shuffling.)

     Calling `strfry' will not disturb any of the random number
     generators that have global state (*note Pseudo-Random Numbers::).

     The return value of `strfry' is always STRING.

     *Portability Note:*  This function is unique to the GNU C Library.
     It is declared in `string.h'.


File: libc.info,  Node: Obfuscating Data,  Next: Encode Binary Data,  Prev: Shuffling Bytes,  Up: String and Array Utilities

5.13 Obfuscating Data
=====================

The `memfrob' function reversibly obfuscates an array of binary data.
This is not true encryption; the obfuscated data still bears a clear
relationship to the original, and no secret key is required to undo the
obfuscation.  It is analogous to the "Rot13" cipher used on Usenet for
obscuring offensive jokes, spoilers for works of fiction, and so on,
but it can be applied to arbitrary binary data.

   Programs that need true encryption--a transformation that completely
obscures the original and cannot be reversed without knowledge of a
secret key--should use a dedicated cryptography library, such as
libgcrypt.

   Programs that need to _destroy_ data should use `explicit_bzero'
(*note Erasing Sensitive Data::), or possibly `strfry' (*note Shuffling
Bytes::).

 -- Function: void * memfrob (void *MEM, size_t LENGTH)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The function `memfrob' obfuscates LENGTH bytes of data beginning
     at MEM, in place.  Each byte is bitwise xor-ed with the binary
     pattern 00101010 (hexadecimal 0x2A).  The return value is always
     MEM.

     `memfrob' a second time on the same data returns it to its
     original state.

     *Portability Note:*  This function is unique to the GNU C Library.
     It is declared in `string.h'.


File: libc.info,  Node: Encode Binary Data,  Next: Argz and Envz Vectors,  Prev: Obfuscating Data,  Up: String and Array Utilities

5.14 Encode Binary Data
=======================

To store or transfer binary data in environments which only support text
one has to encode the binary data by mapping the input bytes to bytes
in the range allowed for storing or transferring.  SVID systems (and
nowadays XPG compliant systems) provide minimal support for this task.

 -- Function: char * l64a (long int N)
     Preliminary: | MT-Unsafe race:l64a | AS-Unsafe | AC-Safe | *Note
     POSIX Safety Concepts::.

     This function encodes a 32-bit input value using bytes from the
     basic character set.  It returns a pointer to a 7 byte buffer which
     contains an encoded version of N.  To encode a series of bytes the
     user must copy the returned string to a destination buffer.  It
     returns the empty string if N is zero, which is somewhat bizarre
     but mandated by the standard.
     *Warning:* Since a static buffer is used this function should not
     be used in multi-threaded programs.  There is no thread-safe
     alternative to this function in the C library.
     *Compatibility Note:* The XPG standard states that the return
     value of `l64a' is undefined if N is negative.  In the GNU
     implementation, `l64a' treats its argument as unsigned, so it will
     return a sensible encoding for any nonzero N; however, portable
     programs should not rely on this.

     To encode a large buffer `l64a' must be called in a loop, once for
     each 32-bit word of the buffer.  For example, one could do
     something like this:

          char *
          encode (const void *buf, size_t len)
          {
            /* We know in advance how long the buffer has to be. */
            unsigned char *in = (unsigned char *) buf;
            char *out = malloc (6 + ((len + 3) / 4) * 6 + 1);
            char *cp = out, *p;

            /* Encode the length. */
            /* Using `htonl' is necessary so that the data can be
               decoded even on machines with different byte order.
               `l64a' can return a string shorter than 6 bytes, so
               we pad it with encoding of 0 ('.') at the end by
               hand. */

            p = stpcpy (cp, l64a (htonl (len)));
            cp = mempcpy (p, "......", 6 - (p - cp));

            while (len > 3)
              {
                unsigned long int n = *in++;
                n = (n << 8) | *in++;
                n = (n << 8) | *in++;
                n = (n << 8) | *in++;
                len -= 4;
                p = stpcpy (cp, l64a (htonl (n)));
                cp = mempcpy (p, "......", 6 - (p - cp));
              }
            if (len > 0)
              {
                unsigned long int n = *in++;
                if (--len > 0)
                  {
                    n = (n << 8) | *in++;
                    if (--len > 0)
                      n = (n << 8) | *in;
                  }
                cp = stpcpy (cp, l64a (htonl (n)));
              }
            *cp = '\0';
            return out;
          }

     It is strange that the library does not provide the complete
     functionality needed but so be it.


   To decode data produced with `l64a' the following function should be
used.

 -- Function: long int a64l (const char *STRING)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The parameter STRING should contain a string which was produced by
     a call to `l64a'.  The function processes at least 6 bytes of this
     string, and decodes the bytes it finds according to the table
     below.  It stops decoding when it finds a byte not in the table,
     rather like `atoi'; if you have a buffer which has been broken into
     lines, you must be careful to skip over the end-of-line bytes.

     The decoded number is returned as a `long int' value.

   The `l64a' and `a64l' functions use a base 64 encoding, in which
each byte of an encoded string represents six bits of an input word.
These symbols are used for the base 64 digits:

        0     1     2     3     4     5     6     7
0       `.'   `/'   `0'   `1'   `2'   `3'   `4'   `5'
8       `6'   `7'   `8'   `9'   `A'   `B'   `C'   `D'
16      `E'   `F'   `G'   `H'   `I'   `J'   `K'   `L'
24      `M'   `N'   `O'   `P'   `Q'   `R'   `S'   `T'
32      `U'   `V'   `W'   `X'   `Y'   `Z'   `a'   `b'
40      `c'   `d'   `e'   `f'   `g'   `h'   `i'   `j'
48      `k'   `l'   `m'   `n'   `o'   `p'   `q'   `r'
56      `s'   `t'   `u'   `v'   `w'   `x'   `y'   `z'

   This encoding scheme is not standard.  There are some other encoding
methods which are much more widely used (UU encoding, MIME encoding).
Generally, it is better to use one of these encodings.


File: libc.info,  Node: Argz and Envz Vectors,  Prev: Encode Binary Data,  Up: String and Array Utilities

5.15 Argz and Envz Vectors
==========================

"argz vectors" are vectors of strings in a contiguous block of memory,
each element separated from its neighbors by null bytes (`'\0'').

   "Envz vectors" are an extension of argz vectors where each element
is a name-value pair, separated by a `'='' byte (as in a Unix
environment).

* Menu:

* Argz Functions::              Operations on argz vectors.
* Envz Functions::              Additional operations on environment vectors.


File: libc.info,  Node: Argz Functions,  Next: Envz Functions,  Up: Argz and Envz Vectors

5.15.1 Argz Functions
---------------------

Each argz vector is represented by a pointer to the first element, of
type `char *', and a size, of type `size_t', both of which can be
initialized to `0' to represent an empty argz vector.  All argz
functions accept either a pointer and a size argument, or pointers to
them, if they will be modified.

   The argz functions use `malloc'/`realloc' to allocate/grow argz
vectors, and so any argz vector created using these functions may be
freed by using `free'; conversely, any argz function that may grow a
string expects that string to have been allocated using `malloc' (those
argz functions that only examine their arguments or modify them in
place will work on any sort of memory).  *Note Unconstrained
Allocation::.

   All argz functions that do memory allocation have a return type of
`error_t', and return `0' for success, and `ENOMEM' if an allocation
error occurs.

   These functions are declared in the standard include file `argz.h'.

 -- Function: error_t argz_create (char *const ARGV[], char **ARGZ,
          size_t *ARGZ_LEN)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The `argz_create' function converts the Unix-style argument vector
     ARGV (a vector of pointers to normal C strings, terminated by
     `(char *)0'; *note Program Arguments::) into an argz vector with
     the same elements, which is returned in ARGZ and ARGZ_LEN.

 -- Function: error_t argz_create_sep (const char *STRING, int SEP,
          char **ARGZ, size_t *ARGZ_LEN)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The `argz_create_sep' function converts the string STRING into an
     argz vector (returned in ARGZ and ARGZ_LEN) by splitting it into
     elements at every occurrence of the byte SEP.

 -- Function: size_t argz_count (const char *ARGZ, size_t ARGZ_LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     Returns the number of elements in the argz vector ARGZ and
     ARGZ_LEN.

 -- Function: void argz_extract (const char *ARGZ, size_t ARGZ_LEN,
          char **ARGV)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `argz_extract' function converts the argz vector ARGZ and
     ARGZ_LEN into a Unix-style argument vector stored in ARGV, by
     putting pointers to every element in ARGZ into successive
     positions in ARGV, followed by a terminator of `0'.  ARGV must be
     pre-allocated with enough space to hold all the elements in ARGZ
     plus the terminating `(char *)0' (`(argz_count (ARGZ, ARGZ_LEN) +
     1) * sizeof (char *)' bytes should be enough).  Note that the
     string pointers stored into ARGV point into ARGZ--they are not
     copies--and so ARGZ must be copied if it will be changed while
     ARGV is still active.  This function is useful for passing the
     elements in ARGZ to an exec function (*note Executing a File::).

 -- Function: void argz_stringify (char *ARGZ, size_t LEN, int SEP)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `argz_stringify' converts ARGZ into a normal string with the
     elements separated by the byte SEP, by replacing each `'\0''
     inside ARGZ (except the last one, which terminates the string)
     with SEP.  This is handy for printing ARGZ in a readable manner.

 -- Function: error_t argz_add (char **ARGZ, size_t *ARGZ_LEN, const
          char *STR)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The `argz_add' function adds the string STR to the end of the argz
     vector `*ARGZ', and updates `*ARGZ' and `*ARGZ_LEN' accordingly.

 -- Function: error_t argz_add_sep (char **ARGZ, size_t *ARGZ_LEN,
          const char *STR, int DELIM)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The `argz_add_sep' function is similar to `argz_add', but STR is
     split into separate elements in the result at occurrences of the
     byte DELIM.  This is useful, for instance, for adding the
     components of a Unix search path to an argz vector, by using a
     value of `':'' for DELIM.

 -- Function: error_t argz_append (char **ARGZ, size_t *ARGZ_LEN, const
          char *BUF, size_t BUF_LEN)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The `argz_append' function appends BUF_LEN bytes starting at BUF
     to the argz vector `*ARGZ', reallocating `*ARGZ' to accommodate
     it, and adding BUF_LEN to `*ARGZ_LEN'.

 -- Function: void argz_delete (char **ARGZ, size_t *ARGZ_LEN, char
          *ENTRY)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     If ENTRY points to the beginning of one of the elements in the
     argz vector `*ARGZ', the `argz_delete' function will remove this
     entry and reallocate `*ARGZ', modifying `*ARGZ' and `*ARGZ_LEN'
     accordingly.  Note that as destructive argz functions usually
     reallocate their argz argument, pointers into argz vectors such as
     ENTRY will then become invalid.

 -- Function: error_t argz_insert (char **ARGZ, size_t *ARGZ_LEN, char
          *BEFORE, const char *ENTRY)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The `argz_insert' function inserts the string ENTRY into the argz
     vector `*ARGZ' at a point just before the existing element pointed
     to by BEFORE, reallocating `*ARGZ' and updating `*ARGZ' and
     `*ARGZ_LEN'.  If BEFORE is `0', ENTRY is added to the end instead
     (as if by `argz_add').  Since the first element is in fact the
     same as `*ARGZ', passing in `*ARGZ' as the value of BEFORE will
     result in ENTRY being inserted at the beginning.

 -- Function: char * argz_next (const char *ARGZ, size_t ARGZ_LEN,
          const char *ENTRY)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `argz_next' function provides a convenient way of iterating
     over the elements in the argz vector ARGZ.  It returns a pointer
     to the next element in ARGZ after the element ENTRY, or `0' if
     there are no elements following ENTRY.  If ENTRY is `0', the first
     element of ARGZ is returned.

     This behavior suggests two styles of iteration:

              char *entry = 0;
              while ((entry = argz_next (ARGZ, ARGZ_LEN, entry)))
                ACTION;

     (the double parentheses are necessary to make some C compilers
     shut up about what they consider a questionable `while'-test) and:

              char *entry;
              for (entry = ARGZ;
                   entry;
                   entry = argz_next (ARGZ, ARGZ_LEN, entry))
                ACTION;

     Note that the latter depends on ARGZ having a value of `0' if it
     is empty (rather than a pointer to an empty block of memory); this
     invariant is maintained for argz vectors created by the functions
     here.

 -- Function: error_t argz_replace (char **ARGZ, size_t *ARGZ_LEN,
          const char *STR, const char *WITH, unsigned *REPLACE_COUNT)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     Replace any occurrences of the string STR in ARGZ with WITH,
     reallocating ARGZ as necessary.  If REPLACE_COUNT is non-zero,
     `*REPLACE_COUNT' will be incremented by the number of replacements
     performed.


File: libc.info,  Node: Envz Functions,  Prev: Argz Functions,  Up: Argz and Envz Vectors

5.15.2 Envz Functions
---------------------

Envz vectors are just argz vectors with additional constraints on the
form of each element; as such, argz functions can also be used on them,
where it makes sense.

   Each element in an envz vector is a name-value pair, separated by a
`'='' byte; if multiple `'='' bytes are present in an element, those
after the first are considered part of the value, and treated like all
other non-`'\0'' bytes.

   If _no_ `'='' bytes are present in an element, that element is
considered the name of a "null" entry, as distinct from an entry with an
empty value: `envz_get' will return `0' if given the name of null
entry, whereas an entry with an empty value would result in a value of
`""'; `envz_entry' will still find such entries, however.  Null entries
can be removed with the `envz_strip' function.

   As with argz functions, envz functions that may allocate memory (and
thus fail) have a return type of `error_t', and return either `0' or
`ENOMEM'.

   These functions are declared in the standard include file `envz.h'.

 -- Function: char * envz_entry (const char *ENVZ, size_t ENVZ_LEN,
          const char *NAME)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `envz_entry' function finds the entry in ENVZ with the name
     NAME, and returns a pointer to the whole entry--that is, the argz
     element which begins with NAME followed by a `'='' byte.  If there
     is no entry with that name, `0' is returned.

 -- Function: char * envz_get (const char *ENVZ, size_t ENVZ_LEN, const
          char *NAME)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `envz_get' function finds the entry in ENVZ with the name NAME
     (like `envz_entry'), and returns a pointer to the value portion of
     that entry (following the `'='').  If there is no entry with that
     name (or only a null entry), `0' is returned.

 -- Function: error_t envz_add (char **ENVZ, size_t *ENVZ_LEN, const
          char *NAME, const char *VALUE)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The `envz_add' function adds an entry to `*ENVZ' (updating `*ENVZ'
     and `*ENVZ_LEN') with the name NAME, and value VALUE.  If an entry
     with the same name already exists in ENVZ, it is removed first.
     If VALUE is `0', then the new entry will be the special null type
     of entry (mentioned above).

 -- Function: error_t envz_merge (char **ENVZ, size_t *ENVZ_LEN, const
          char *ENVZ2, size_t ENVZ2_LEN, int OVERRIDE)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The `envz_merge' function adds each entry in ENVZ2 to ENVZ, as if
     with `envz_add', updating `*ENVZ' and `*ENVZ_LEN'.  If OVERRIDE is
     true, then values in ENVZ2 will supersede those with the same name
     in ENVZ, otherwise not.

     Null entries are treated just like other entries in this respect,
     so a null entry in ENVZ can prevent an entry of the same name in
     ENVZ2 from being added to ENVZ, if OVERRIDE is false.

 -- Function: void envz_strip (char **ENVZ, size_t *ENVZ_LEN)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `envz_strip' function removes any null entries from ENVZ,
     updating `*ENVZ' and `*ENVZ_LEN'.

 -- Function: void envz_remove (char **ENVZ, size_t *ENVZ_LEN, const
          char *NAME)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The `envz_remove' function removes an entry named NAME from ENVZ,
     updating `*ENVZ' and `*ENVZ_LEN'.


File: libc.info,  Node: Character Set Handling,  Next: Locales,  Prev: String and Array Utilities,  Up: Top

6 Character Set Handling
************************

Character sets used in the early days of computing had only six, seven,
or eight bits for each character: there was never a case where more than
eight bits (one byte) were used to represent a single character.  The
limitations of this approach became more apparent as more people
grappled with non-Roman character sets, where not all the characters
that make up a language's character set can be represented by 2^8
choices.  This chapter shows the functionality that was added to the C
library to support multiple character sets.

* Menu:

* Extended Char Intro::              Introduction to Extended Characters.
* Charset Function Overview::        Overview about Character Handling
                                      Functions.
* Restartable multibyte conversion:: Restartable multibyte conversion
                                      Functions.
* Non-reentrant Conversion::         Non-reentrant Conversion Function.
* Generic Charset Conversion::       Generic Charset Conversion.


File: libc.info,  Node: Extended Char Intro,  Next: Charset Function Overview,  Up: Character Set Handling

6.1 Introduction to Extended Characters
=======================================

A variety of solutions are available to overcome the differences between
character sets with a 1:1 relation between bytes and characters and
character sets with ratios of 2:1 or 4:1.  The remainder of this
section gives a few examples to help understand the design decisions
made while developing the functionality of the C library.

   A distinction we have to make right away is between internal and
external representation.  "Internal representation" means the
representation used by a program while keeping the text in memory.
External representations are used when text is stored or transmitted
through some communication channel.  Examples of external
representations include files waiting in a directory to be read and
parsed.

   Traditionally there has been no difference between the two
representations.  It was equally comfortable and useful to use the same
single-byte representation internally and externally.  This comfort
level decreases with more and larger character sets.

   One of the problems to overcome with the internal representation is
handling text that is externally encoded using different character
sets.  Assume a program that reads two texts and compares them using
some metric.  The comparison can be usefully done only if the texts are
internally kept in a common format.

   For such a common format (= character set) eight bits are certainly
no longer enough.  So the smallest entity will have to grow: "wide
characters" will now be used.  Instead of one byte per character, two or
four will be used instead.  (Three are not good to address in memory and
more than four bytes seem not to be necessary).

   As shown in some other part of this manual, a completely new family
has been created of functions that can handle wide character texts in
memory.  The most commonly used character sets for such internal wide
character representations are Unicode and ISO 10646 (also known as UCS
for Universal Character Set).  Unicode was originally planned as a
16-bit character set; whereas, ISO 10646 was designed to be a 31-bit
large code space.  The two standards are practically identical.  They
have the same character repertoire and code table, but Unicode specifies
added semantics.  At the moment, only characters in the first `0x10000'
code positions (the so-called Basic Multilingual Plane, BMP) have been
assigned, but the assignment of more specialized characters outside this
16-bit space is already in progress.  A number of encodings have been
defined for Unicode and ISO 10646 characters: UCS-2 is a 16-bit word
that can only represent characters from the BMP, UCS-4 is a 32-bit word
than can represent any Unicode and ISO 10646 character, UTF-8 is an
ASCII compatible encoding where ASCII characters are represented by
ASCII bytes and non-ASCII characters by sequences of 2-6 non-ASCII
bytes, and finally UTF-16 is an extension of UCS-2 in which pairs of
certain UCS-2 words can be used to encode non-BMP characters up to
`0x10ffff'.

   To represent wide characters the `char' type is not suitable.  For
this reason the ISO C standard introduces a new type that is designed
to keep one character of a wide character string.  To maintain the
similarity there is also a type corresponding to `int' for those
functions that take a single wide character.

 -- Data type: wchar_t
     This data type is used as the base type for wide character strings.
     In other words, arrays of objects of this type are the equivalent
     of `char[]' for multibyte character strings.  The type is defined
     in `stddef.h'.

     The ISO C90 standard, where `wchar_t' was introduced, does not say
     anything specific about the representation.  It only requires that
     this type is capable of storing all elements of the basic
     character set.  Therefore it would be legitimate to define
     `wchar_t' as `char', which might make sense for embedded systems.

     But in the GNU C Library `wchar_t' is always 32 bits wide and,
     therefore, capable of representing all UCS-4 values and,
     therefore, covering all of ISO 10646.  Some Unix systems define
     `wchar_t' as a 16-bit type and thereby follow Unicode very
     strictly.  This definition is perfectly fine with the standard,
     but it also means that to represent all characters from Unicode
     and ISO 10646 one has to use UTF-16 surrogate characters, which is
     in fact a multi-wide-character encoding.  But resorting to
     multi-wide-character encoding contradicts the purpose of the
     `wchar_t' type.

 -- Data type: wint_t
     `wint_t' is a data type used for parameters and variables that
     contain a single wide character.  As the name suggests this type
     is the equivalent of `int' when using the normal `char' strings.
     The types `wchar_t' and `wint_t' often have the same
     representation if their size is 32 bits wide but if `wchar_t' is
     defined as `char' the type `wint_t' must be defined as `int' due
     to the parameter promotion.

     This type is defined in `wchar.h' and was introduced in
     Amendment 1 to ISO C90.

   As there are for the `char' data type macros are available for
specifying the minimum and maximum value representable in an object of
type `wchar_t'.

 -- Macro: wint_t WCHAR_MIN
     The macro `WCHAR_MIN' evaluates to the minimum value representable
     by an object of type `wint_t'.

     This macro was introduced in Amendment 1 to ISO C90.

 -- Macro: wint_t WCHAR_MAX
     The macro `WCHAR_MAX' evaluates to the maximum value representable
     by an object of type `wint_t'.

     This macro was introduced in Amendment 1 to ISO C90.

   Another special wide character value is the equivalent to `EOF'.

 -- Macro: wint_t WEOF
     The macro `WEOF' evaluates to a constant expression of type
     `wint_t' whose value is different from any member of the extended
     character set.

     `WEOF' need not be the same value as `EOF' and unlike `EOF' it
     also need _not_ be negative.  In other words, sloppy code like

          {
            int c;
            ...
            while ((c = getc (fp)) < 0)
              ...
          }

     has to be rewritten to use `WEOF' explicitly when wide characters
     are used:

          {
            wint_t c;
            ...
            while ((c = wgetc (fp)) != WEOF)
              ...
          }

     This macro was introduced in Amendment 1 to ISO C90 and is defined
     in `wchar.h'.

   These internal representations present problems when it comes to
storage and transmittal.  Because each single wide character consists
of more than one byte, they are affected by byte-ordering.  Thus,
machines with different endianesses would see different values when
accessing the same data.  This byte ordering concern also applies for
communication protocols that are all byte-based and therefore require
that the sender has to decide about splitting the wide character in
bytes.  A last (but not least important) point is that wide characters
often require more storage space than a customized byte-oriented
character set.

   For all the above reasons, an external encoding that is different
from the internal encoding is often used if the latter is UCS-2 or
UCS-4.  The external encoding is byte-based and can be chosen
appropriately for the environment and for the texts to be handled.  A
variety of different character sets can be used for this external
encoding (information that will not be exhaustively presented
here-instead, a description of the major groups will suffice).  All of
the ASCII-based character sets fulfill one requirement: they are
"filesystem safe."  This means that the character `'/'' is used in the
encoding _only_ to represent itself.  Things are a bit different for
character sets like EBCDIC (Extended Binary Coded Decimal Interchange
Code, a character set family used by IBM), but if the operating system
does not understand EBCDIC directly the parameters-to-system calls have
to be converted first anyhow.

   * The simplest character sets are single-byte character sets.  There
     can be only up to 256 characters (for 8 bit character sets), which
     is not sufficient to cover all languages but might be sufficient
     to handle a specific text.  Handling of a 8 bit character sets is
     simple.  This is not true for other kinds presented later, and
     therefore, the application one uses might require the use of 8 bit
     character sets.

   * The ISO 2022 standard defines a mechanism for extended character
     sets where one character _can_ be represented by more than one
     byte.  This is achieved by associating a state with the text.
     Characters that can be used to change the state can be embedded in
     the text.  Each byte in the text might have a different
     interpretation in each state.  The state might even influence
     whether a given byte stands for a character on its own or whether
     it has to be combined with some more bytes.

     In most uses of ISO 2022 the defined character sets do not allow
     state changes that cover more than the next character.  This has
     the big advantage that whenever one can identify the beginning of
     the byte sequence of a character one can interpret a text
     correctly.  Examples of character sets using this policy are the
     various EUC character sets (used by Sun's operating systems,
     EUC-JP, EUC-KR, EUC-TW, and EUC-CN) or Shift_JIS (SJIS, a Japanese
     encoding).

     But there are also character sets using a state that is valid for
     more than one character and has to be changed by another byte
     sequence.  Examples for this are ISO-2022-JP, ISO-2022-KR, and
     ISO-2022-CN.

   * Early attempts to fix 8 bit character sets for other languages
     using the Roman alphabet lead to character sets like ISO 6937.
     Here bytes representing characters like the acute accent do not
     produce output themselves: one has to combine them with other
     characters to get the desired result.  For example, the byte
     sequence `0xc2 0x61' (non-spacing acute accent, followed by
     lower-case `a') to get the "small a with  acute" character.  To
     get the acute accent character on its own, one has to write `0xc2
     0x20' (the non-spacing acute followed by a space).

     Character sets like ISO 6937 are used in some embedded systems such
     as teletex.

   * Instead of converting the Unicode or ISO 10646 text used
     internally, it is often also sufficient to simply use an encoding
     different than UCS-2/UCS-4.  The Unicode and ISO 10646 standards
     even specify such an encoding: UTF-8.  This encoding is able to
     represent all of ISO 10646 31 bits in a byte string of length one
     to six.

     There were a few other attempts to encode ISO 10646 such as UTF-7,
     but UTF-8 is today the only encoding that should be used.  In
     fact, with any luck UTF-8 will soon be the only external encoding
     that has to be supported.  It proves to be universally usable and
     its only disadvantage is that it favors Roman languages by making
     the byte string representation of other scripts (Cyrillic, Greek,
     Asian scripts) longer than necessary if using a specific character
     set for these scripts.  Methods like the Unicode compression
     scheme can alleviate these problems.

   The question remaining is: how to select the character set or
encoding to use.  The answer: you cannot decide about it yourself, it
is decided by the developers of the system or the majority of the
users.  Since the goal is interoperability one has to use whatever the
other people one works with use.  If there are no constraints, the
selection is based on the requirements the expected circle of users
will have.  In other words, if a project is expected to be used in
only, say, Russia it is fine to use KOI8-R or a similar character set.
But if at the same time people from, say, Greece are participating one
should use a character set that allows all people to collaborate.

   The most widely useful solution seems to be: go with the most general
character set, namely ISO 10646.  Use UTF-8 as the external encoding
and problems about users not being able to use their own language
adequately are a thing of the past.

   One final comment about the choice of the wide character
representation is necessary at this point.  We have said above that the
natural choice is using Unicode or ISO 10646.  This is not required,
but at least encouraged, by the ISO C standard.  The standard defines
at least a macro `__STDC_ISO_10646__' that is only defined on systems
where the `wchar_t' type encodes ISO 10646 characters.  If this symbol
is not defined one should avoid making assumptions about the wide
character representation.  If the programmer uses only the functions
provided by the C library to handle wide character strings there should
be no compatibility problems with other systems.


File: libc.info,  Node: Charset Function Overview,  Next: Restartable multibyte conversion,  Prev: Extended Char Intro,  Up: Character Set Handling

6.2 Overview about Character Handling Functions
===============================================

A Unix C library contains three different sets of functions in two
families to handle character set conversion.  One of the function
families (the most commonly used) is specified in the ISO C90 standard
and, therefore, is portable even beyond the Unix world.  Unfortunately
this family is the least useful one.  These functions should be avoided
whenever possible, especially when developing libraries (as opposed to
applications).

   The second family of functions got introduced in the early Unix
standards (XPG2) and is still part of the latest and greatest Unix
standard: Unix 98.  It is also the most powerful and useful set of
functions.  But we will start with the functions defined in Amendment 1
to ISO C90.


File: libc.info,  Node: Restartable multibyte conversion,  Next: Non-reentrant Conversion,  Prev: Charset Function Overview,  Up: Character Set Handling

6.3 Restartable Multibyte Conversion Functions
==============================================

The ISO C standard defines functions to convert strings from a
multibyte representation to wide character strings.  There are a number
of peculiarities:

   * The character set assumed for the multibyte encoding is not
     specified as an argument to the functions.  Instead the character
     set specified by the `LC_CTYPE' category of the current locale is
     used; see *Note Locale Categories::.

   * The functions handling more than one character at a time require
     NUL terminated strings as the argument (i.e., converting blocks of
     text does not work unless one can add a NUL byte at an appropriate
     place).  The GNU C Library contains some extensions to the
     standard that allow specifying a size, but basically they also
     expect terminated strings.

   Despite these limitations the ISO C functions can be used in many
contexts.  In graphical user interfaces, for instance, it is not
uncommon to have functions that require text to be displayed in a wide
character string if the text is not simple ASCII.  The text itself might
come from a file with translations and the user should decide about the
current locale, which determines the translation and therefore also the
external encoding used.  In such a situation (and many others) the
functions described here are perfect.  If more freedom while performing
the conversion is necessary take a look at the `iconv' functions (*note
Generic Charset Conversion::).

* Menu:

* Selecting the Conversion::     Selecting the conversion and its properties.
* Keeping the state::            Representing the state of the conversion.
* Converting a Character::       Converting Single Characters.
* Converting Strings::           Converting Multibyte and Wide Character
                                  Strings.
* Multibyte Conversion Example:: A Complete Multibyte Conversion Example.


File: libc.info,  Node: Selecting the Conversion,  Next: Keeping the state,  Up: Restartable multibyte conversion

6.3.1 Selecting the conversion and its properties
-------------------------------------------------

We already said above that the currently selected locale for the
`LC_CTYPE' category decides the conversion that is performed by the
functions we are about to describe.  Each locale uses its own character
set (given as an argument to `localedef') and this is the one assumed
as the external multibyte encoding.  The wide character set is always
UCS-4 in the GNU C Library.

   A characteristic of each multibyte character set is the maximum
number of bytes that can be necessary to represent one character.  This
information is quite important when writing code that uses the
conversion functions (as shown in the examples below).  The ISO C
standard defines two macros that provide this information.

 -- Macro: int MB_LEN_MAX
     `MB_LEN_MAX' specifies the maximum number of bytes in the multibyte
     sequence for a single character in any of the supported locales.
     It is a compile-time constant and is defined in `limits.h'.  

 -- Macro: int MB_CUR_MAX
     `MB_CUR_MAX' expands into a positive integer expression that is the
     maximum number of bytes in a multibyte character in the current
     locale.  The value is never greater than `MB_LEN_MAX'.  Unlike
     `MB_LEN_MAX' this macro need not be a compile-time constant, and in
     the GNU C Library it is not.

     `MB_CUR_MAX' is defined in `stdlib.h'.

   Two different macros are necessary since strictly ISO C90 compilers
do not allow variable length array definitions, but still it is
desirable to avoid dynamic allocation.  This incomplete piece of code
shows the problem:

     {
       char buf[MB_LEN_MAX];
       ssize_t len = 0;

       while (! feof (fp))
         {
           fread (&buf[len], 1, MB_CUR_MAX - len, fp);
           /* ... process buf */
           len -= used;
         }
     }

   The code in the inner loop is expected to have always enough bytes in
the array BUF to convert one multibyte character.  The array BUF has to
be sized statically since many compilers do not allow a variable size.
The `fread' call makes sure that `MB_CUR_MAX' bytes are always
available in BUF.  Note that it isn't a problem if `MB_CUR_MAX' is not
a compile-time constant.


File: libc.info,  Node: Keeping the state,  Next: Converting a Character,  Prev: Selecting the Conversion,  Up: Restartable multibyte conversion

6.3.2 Representing the state of the conversion
----------------------------------------------

In the introduction of this chapter it was said that certain character
sets use a "stateful" encoding.  That is, the encoded values depend in
some way on the previous bytes in the text.

   Since the conversion functions allow converting a text in more than
one step we must have a way to pass this information from one call of
the functions to another.

 -- Data type: mbstate_t
     A variable of type `mbstate_t' can contain all the information
     about the "shift state" needed from one call to a conversion
     function to another.

     `mbstate_t' is defined in `wchar.h'.  It was introduced in
     Amendment 1 to ISO C90.

   To use objects of type `mbstate_t' the programmer has to define such
objects (normally as local variables on the stack) and pass a pointer to
the object to the conversion functions.  This way the conversion
function can update the object if the current multibyte character set
is stateful.

   There is no specific function or initializer to put the state object
in any specific state.  The rules are that the object should always
represent the initial state before the first use, and this is achieved
by clearing the whole variable with code such as follows:

     {
       mbstate_t state;
       memset (&state, '\0', sizeof (state));
       /* from now on STATE can be used.  */
       ...
     }

   When using the conversion functions to generate output it is often
necessary to test whether the current state corresponds to the initial
state.  This is necessary, for example, to decide whether to emit
escape sequences to set the state to the initial state at certain
sequence points.  Communication protocols often require this.

 -- Function: int mbsinit (const mbstate_t *PS)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `mbsinit' function determines whether the state object pointed
     to by PS is in the initial state.  If PS is a null pointer or the
     object is in the initial state the return value is nonzero.
     Otherwise it is zero.

     `mbsinit' was introduced in Amendment 1 to ISO C90 and is declared
     in `wchar.h'.

   Code using `mbsinit' often looks similar to this:

     {
       mbstate_t state;
       memset (&state, '\0', sizeof (state));
       /* Use STATE.  */
       ...
       if (! mbsinit (&state))
         {
           /* Emit code to return to initial state.  */
           const wchar_t empty[] = L"";
           const wchar_t *srcp = empty;
           wcsrtombs (outbuf, &srcp, outbuflen, &state);
         }
       ...
     }

   The code to emit the escape sequence to get back to the initial
state is interesting.  The `wcsrtombs' function can be used to
determine the necessary output code (*note Converting Strings::).
Please note that with the GNU C Library it is not necessary to perform
this extra action for the conversion from multibyte text to wide
character text since the wide character encoding is not stateful.  But
there is nothing mentioned in any standard that prohibits making
`wchar_t' use a stateful encoding.


File: libc.info,  Node: Converting a Character,  Next: Converting Strings,  Prev: Keeping the state,  Up: Restartable multibyte conversion

6.3.3 Converting Single Characters
----------------------------------

The most fundamental of the conversion functions are those dealing with
single characters.  Please note that this does not always mean single
bytes.  But since there is very often a subset of the multibyte
character set that consists of single byte sequences, there are
functions to help with converting bytes.  Frequently, ASCII is a subset
of the multibyte character set.  In such a scenario, each ASCII
character stands for itself, and all other characters have at least a
first byte that is beyond the range 0 to 127.

 -- Function: wint_t btowc (int C)
     Preliminary: | MT-Safe | AS-Unsafe corrupt heap lock dlopen |
     AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The `btowc' function ("byte to wide character") converts a valid
     single byte character C in the initial shift state into the wide
     character equivalent using the conversion rules from the currently
     selected locale of the `LC_CTYPE' category.

     If `(unsigned char) C' is no valid single byte multibyte character
     or if C is `EOF', the function returns `WEOF'.

     Please note the restriction of C being tested for validity only in
     the initial shift state.  No `mbstate_t' object is used from which
     the state information is taken, and the function also does not use
     any static state.

     The `btowc' function was introduced in Amendment 1 to ISO C90 and
     is declared in `wchar.h'.

   Despite the limitation that the single byte value is always
interpreted in the initial state, this function is actually useful most
of the time.  Most characters are either entirely single-byte character
sets or they are extensions to ASCII.  But then it is possible to write
code like this (not that this specific example is very useful):

     wchar_t *
     itow (unsigned long int val)
     {
       static wchar_t buf[30];
       wchar_t *wcp = &buf[29];
       *wcp = L'\0';
       while (val != 0)
         {
           *--wcp = btowc ('0' + val % 10);
           val /= 10;
         }
       if (wcp == &buf[29])
         *--wcp = L'0';
       return wcp;
     }

   Why is it necessary to use such a complicated implementation and not
simply cast `'0' + val % 10' to a wide character?  The answer is that
there is no guarantee that one can perform this kind of arithmetic on
the character of the character set used for `wchar_t' representation.
In other situations the bytes are not constant at compile time and so
the compiler cannot do the work.  In situations like this, using
`btowc' is required.

There is also a function for the conversion in the other direction.

 -- Function: int wctob (wint_t C)
     Preliminary: | MT-Safe | AS-Unsafe corrupt heap lock dlopen |
     AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The `wctob' function ("wide character to byte") takes as the
     parameter a valid wide character.  If the multibyte representation
     for this character in the initial state is exactly one byte long,
     the return value of this function is this character.  Otherwise
     the return value is `EOF'.

     `wctob' was introduced in Amendment 1 to ISO C90 and is declared
     in `wchar.h'.

   There are more general functions to convert single characters from
multibyte representation to wide characters and vice versa.  These
functions pose no limit on the length of the multibyte representation
and they also do not require it to be in the initial state.

 -- Function: size_t mbrtowc (wchar_t *restrict PWC, const char
          *restrict S, size_t N, mbstate_t *restrict PS)
     Preliminary: | MT-Unsafe race:mbrtowc/!ps | AS-Unsafe corrupt heap
     lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety
     Concepts::.

     The `mbrtowc' function ("multibyte restartable to wide character")
     converts the next multibyte character in the string pointed to by
     S into a wide character and stores it in the location pointed to
     by PWC.  The conversion is performed according to the locale
     currently selected for the `LC_CTYPE' category.  If the conversion
     for the character set used in the locale requires a state, the
     multibyte string is interpreted in the state represented by the
     object pointed to by PS.  If PS is a null pointer, a static,
     internal state variable used only by the `mbrtowc' function is
     used.

     If the next multibyte character corresponds to the null wide
     character, the return value of the function is 0 and the state
     object is afterwards in the initial state.  If the next N or fewer
     bytes form a correct multibyte character, the return value is the
     number of bytes starting from S that form the multibyte character.
     The conversion state is updated according to the bytes consumed
     in the conversion.  In both cases the wide character (either the
     `L'\0'' or the one found in the conversion) is stored in the
     string pointed to by PWC if PWC is not null.

     If the first N bytes of the multibyte string possibly form a valid
     multibyte character but there are more than N bytes needed to
     complete it, the return value of the function is `(size_t) -2' and
     no value is stored in `*PWC'.  The conversion state is updated and
     all N input bytes are consumed and should not be submitted again.
     Please note that this can happen even if N has a value greater
     than or equal to `MB_CUR_MAX' since the input might contain
     redundant shift sequences.

     If the first `n' bytes of the multibyte string cannot possibly form
     a valid multibyte character, no value is stored, the global
     variable `errno' is set to the value `EILSEQ', and the function
     returns `(size_t) -1'.  The conversion state is afterwards
     undefined.

     As specified, the `mbrtowc' function could deal with multibyte
     sequences which contain embedded null bytes (which happens in
     Unicode encodings such as UTF-16), but the GNU C Library does not
     support such multibyte encodings.  When encountering a null input
     byte, the function will either return zero, or return `(size_t)
     -1)' and report a `EILSEQ' error.  The `iconv' function can be
     used for converting between arbitrary encodings.  *Note Generic
     Conversion Interface::.

     `mbrtowc' was introduced in Amendment 1 to ISO C90 and is declared
     in `wchar.h'.

   A function that copies a multibyte string into a wide character
string while at the same time converting all lowercase characters into
uppercase could look like this:

     wchar_t *
     mbstouwcs (const char *s)
     {
       /* Include the null terminator in the conversion. */
       size_t len = strlen (s) + 1;
       wchar_t *result = reallocarray (NULL, len, sizeof (wchar_t));
       if (result == NULL)
         return NULL;

       wchar_t *wcp = result;
       mbstate_t state;
       memset (&state, '\0', sizeof (state));

       while (true)
         {
           wchar_t wc;
           size_t nbytes = mbrtowc (&wc, s, len, &state);
           if (nbytes == 0)
             {
               /* Terminate the result string. */
               *wcp = L'\0';
               break;
             }
           else if (nbytes == (size_t) -2)
             {
               /* Truncated input string. */
               errno = EILSEQ;
               free (result);
               return NULL;
             }
           else if (nbytes == (size_t) -1)
             {
               /* Some other error (including EILSEQ). */
               free (result);
               return NULL;
             }
           else
             {
               /* A character was converted. */
               *wcp++ = towupper (wc);
               len -= nbytes;
               s += nbytes;
             }
         }
       return result;
     }

   In the inner loop, a single wide character is stored in `wc', and
the number of consumed bytes is stored in the variable `nbytes'.  If
the conversion is successful, the uppercase variant of the wide
character is stored in the `result' array and the pointer to the input
string and the number of available bytes is adjusted.  If the `mbrtowc'
function returns zero, the null input byte has not been converted, so
it must be stored explicitly in the result.

   The above code uses the fact that there can never be more wide
characters in the converted result than there are bytes in the multibyte
input string.  This method yields a pessimistic guess about the size of
the result, and if many wide character strings have to be constructed
this way or if the strings are long, the extra memory required to be
allocated because the input string contains multibyte characters might
be significant.  The allocated memory block can be resized to the
correct size before returning it, but a better solution might be to
allocate just the right amount of space for the result right away.
Unfortunately there is no function to compute the length of the wide
character string directly from the multibyte string.  There is, however,
a function that does part of the work.

 -- Function: size_t mbrlen (const char *restrict S, size_t N,
          mbstate_t *PS)
     Preliminary: | MT-Unsafe race:mbrlen/!ps | AS-Unsafe corrupt heap
     lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety
     Concepts::.

     The `mbrlen' function ("multibyte restartable length") computes
     the number of at most N bytes starting at S, which form the next
     valid and complete multibyte character.

     If the next multibyte character corresponds to the NUL wide
     character, the return value is 0.  If the next N bytes form a valid
     multibyte character, the number of bytes belonging to this
     multibyte character byte sequence is returned.

     If the first N bytes possibly form a valid multibyte character but
     the character is incomplete, the return value is `(size_t) -2'.
     Otherwise the multibyte character sequence is invalid and the
     return value is `(size_t) -1'.

     The multibyte sequence is interpreted in the state represented by
     the object pointed to by PS.  If PS is a null pointer, a state
     object local to `mbrlen' is used.

     `mbrlen' was introduced in Amendment 1 to ISO C90 and is declared
     in `wchar.h'.

   The attentive reader now will note that `mbrlen' can be implemented
as

     mbrtowc (NULL, s, n, ps != NULL ? ps : &internal)

   This is true and in fact is mentioned in the official specification.
How can this function be used to determine the length of the wide
character string created from a multibyte character string?  It is not
directly usable, but we can define a function `mbslen' using it:

     size_t
     mbslen (const char *s)
     {
       mbstate_t state;
       size_t result = 0;
       size_t nbytes;
       memset (&state, '\0', sizeof (state));
       while ((nbytes = mbrlen (s, MB_LEN_MAX, &state)) > 0)
         {
           if (nbytes >= (size_t) -2)
             /* Something is wrong.  */
             return (size_t) -1;
           s += nbytes;
           ++result;
         }
       return result;
     }

   This function simply calls `mbrlen' for each multibyte character in
the string and counts the number of function calls.  Please note that
we here use `MB_LEN_MAX' as the size argument in the `mbrlen' call.
This is acceptable since a) this value is larger than the length of the
longest multibyte character sequence and b) we know that the string S
ends with a NUL byte, which cannot be part of any other multibyte
character sequence but the one representing the NUL wide character.
Therefore, the `mbrlen' function will never read invalid memory.

   Now that this function is available (just to make this clear, this
function is _not_ part of the GNU C Library) we can compute the number
of wide characters required to store the converted multibyte character
string S using

     wcs_bytes = (mbslen (s) + 1) * sizeof (wchar_t);

   Please note that the `mbslen' function is quite inefficient.  The
implementation of `mbstouwcs' with `mbslen' would have to perform the
conversion of the multibyte character input string twice, and this
conversion might be quite expensive.  So it is necessary to think about
the consequences of using the easier but imprecise method before doing
the work twice.

 -- Function: size_t wcrtomb (char *restrict S, wchar_t WC, mbstate_t
          *restrict PS)
     Preliminary: | MT-Unsafe race:wcrtomb/!ps | AS-Unsafe corrupt heap
     lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety
     Concepts::.

     The `wcrtomb' function ("wide character restartable to multibyte")
     converts a single wide character into a multibyte string
     corresponding to that wide character.

     If S is a null pointer, the function resets the state stored in
     the object pointed to by PS (or the internal `mbstate_t' object)
     to the initial state.  This can also be achieved by a call like
     this:

          wcrtombs (temp_buf, L'\0', ps)

     since, if S is a null pointer, `wcrtomb' performs as if it writes
     into an internal buffer, which is guaranteed to be large enough.

     If WC is the NUL wide character, `wcrtomb' emits, if necessary, a
     shift sequence to get the state PS into the initial state followed
     by a single NUL byte, which is stored in the string S.

     Otherwise a byte sequence (possibly including shift sequences) is
     written into the string S.  This only happens if WC is a valid wide
     character (i.e., it has a multibyte representation in the
     character set selected by locale of the `LC_CTYPE' category).  If
     WC is no valid wide character, nothing is stored in the strings S,
     `errno' is set to `EILSEQ', the conversion state in PS is
     undefined and the return value is `(size_t) -1'.

     If no error occurred the function returns the number of bytes
     stored in the string S.  This includes all bytes representing shift
     sequences.

     One word about the interface of the function: there is no parameter
     specifying the length of the array S.  Instead the function
     assumes that there are at least `MB_CUR_MAX' bytes available since
     this is the maximum length of any byte sequence representing a
     single character.  So the caller has to make sure that there is
     enough space available, otherwise buffer overruns can occur.

     `wcrtomb' was introduced in Amendment 1 to ISO C90 and is declared
     in `wchar.h'.

   Using `wcrtomb' is as easy as using `mbrtowc'.  The following
example appends a wide character string to a multibyte character string.
Again, the code is not really useful (or correct), it is simply here to
demonstrate the use and some problems.

     char *
     mbscatwcs (char *s, size_t len, const wchar_t *ws)
     {
       mbstate_t state;
       /* Find the end of the existing string.  */
       char *wp = strchr (s, '\0');
       len -= wp - s;
       memset (&state, '\0', sizeof (state));
       do
         {
           size_t nbytes;
           if (len < MB_CUR_LEN)
             {
               /* We cannot guarantee that the next
                  character fits into the buffer, so
                  return an error.  */
               errno = E2BIG;
               return NULL;
             }
           nbytes = wcrtomb (wp, *ws, &state);
           if (nbytes == (size_t) -1)
             /* Error in the conversion.  */
             return NULL;
           len -= nbytes;
           wp += nbytes;
         }
       while (*ws++ != L'\0');
       return s;
     }

   First the function has to find the end of the string currently in the
array S.  The `strchr' call does this very efficiently since a
requirement for multibyte character representations is that the NUL byte
is never used except to represent itself (and in this context, the end
of the string).

   After initializing the state object the loop is entered where the
first task is to make sure there is enough room in the array S.  We
abort if there are not at least `MB_CUR_LEN' bytes available.  This is
not always optimal but we have no other choice.  We might have less
than `MB_CUR_LEN' bytes available but the next multibyte character
might also be only one byte long.  At the time the `wcrtomb' call
returns it is too late to decide whether the buffer was large enough.
If this solution is unsuitable, there is a very slow but more accurate
solution.

       ...
       if (len < MB_CUR_LEN)
         {
           mbstate_t temp_state;
           memcpy (&temp_state, &state, sizeof (state));
           if (wcrtomb (NULL, *ws, &temp_state) > len)
             {
               /* We cannot guarantee that the next
                  character fits into the buffer, so
                  return an error.  */
               errno = E2BIG;
               return NULL;
             }
         }
       ...

   Here we perform the conversion that might overflow the buffer so that
we are afterwards in the position to make an exact decision about the
buffer size.  Please note the `NULL' argument for the destination
buffer in the new `wcrtomb' call; since we are not interested in the
converted text at this point, this is a nice way to express this.  The
most unusual thing about this piece of code certainly is the duplication
of the conversion state object, but if a change of the state is
necessary to emit the next multibyte character, we want to have the
same shift state change performed in the real conversion.  Therefore,
we have to preserve the initial shift state information.

   There are certainly many more and even better solutions to this
problem.  This example is only provided for educational purposes.


File: libc.info,  Node: Converting Strings,  Next: Multibyte Conversion Example,  Prev: Converting a Character,  Up: Restartable multibyte conversion

6.3.4 Converting Multibyte and Wide Character Strings
-----------------------------------------------------

The functions described in the previous section only convert a single
character at a time.  Most operations to be performed in real-world
programs include strings and therefore the ISO C standard also defines
conversions on entire strings.  However, the defined set of functions
is quite limited; therefore, the GNU C Library contains a few
extensions that can help in some important situations.

 -- Function: size_t mbsrtowcs (wchar_t *restrict DST, const char
          **restrict SRC, size_t LEN, mbstate_t *restrict PS)
     Preliminary: | MT-Unsafe race:mbsrtowcs/!ps | AS-Unsafe corrupt
     heap lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX
     Safety Concepts::.

     The `mbsrtowcs' function ("multibyte string restartable to wide
     character string") converts the NUL-terminated multibyte character
     string at `*SRC' into an equivalent wide character string,
     including the NUL wide character at the end.  The conversion is
     started using the state information from the object pointed to by
     PS or from an internal object of `mbsrtowcs' if PS is a null
     pointer.  Before returning, the state object is updated to match
     the state after the last converted character.  The state is the
     initial state if the terminating NUL byte is reached and converted.

     If DST is not a null pointer, the result is stored in the array
     pointed to by DST; otherwise, the conversion result is not
     available since it is stored in an internal buffer.

     If LEN wide characters are stored in the array DST before reaching
     the end of the input string, the conversion stops and LEN is
     returned.  If DST is a null pointer, LEN is never checked.

     Another reason for a premature return from the function call is if
     the input string contains an invalid multibyte sequence.  In this
     case the global variable `errno' is set to `EILSEQ' and the
     function returns `(size_t) -1'.

     In all other cases the function returns the number of wide
     characters converted during this call.  If DST is not null,
     `mbsrtowcs' stores in the pointer pointed to by SRC either a null
     pointer (if the NUL byte in the input string was reached) or the
     address of the byte following the last converted multibyte
     character.

     `mbsrtowcs' was introduced in Amendment 1 to ISO C90 and is
     declared in `wchar.h'.

   The definition of the `mbsrtowcs' function has one important
limitation.  The requirement that DST has to be a NUL-terminated string
provides problems if one wants to convert buffers with text.  A buffer
is not normally a collection of NUL-terminated strings but instead a
continuous collection of lines, separated by newline characters.  Now
assume that a function to convert one line from a buffer is needed.
Since the line is not NUL-terminated, the source pointer cannot
directly point into the unmodified text buffer.  This means, either one
inserts the NUL byte at the appropriate place for the time of the
`mbsrtowcs' function call (which is not doable for a read-only buffer
or in a multi-threaded application) or one copies the line in an extra
buffer where it can be terminated by a NUL byte.  Note that it is not
in general possible to limit the number of characters to convert by
setting the parameter LEN to any specific value.  Since it is not known
how many bytes each multibyte character sequence is in length, one can
only guess.

   There is still a problem with the method of NUL-terminating a line
right after the newline character, which could lead to very strange
results.  As said in the description of the `mbsrtowcs' function above,
the conversion state is guaranteed to be in the initial shift state
after processing the NUL byte at the end of the input string.  But this
NUL byte is not really part of the text (i.e., the conversion state
after the newline in the original text could be something different
than the initial shift state and therefore the first character of the
next line is encoded using this state).  But the state in question is
never accessible to the user since the conversion stops after the NUL
byte (which resets the state).  Most stateful character sets in use
today require that the shift state after a newline be the initial
state-but this is not a strict guarantee.  Therefore, simply
NUL-terminating a piece of a running text is not always an adequate
solution and, therefore, should never be used in generally used code.

   The generic conversion interface (*note Generic Charset Conversion::)
does not have this limitation (it simply works on buffers, not
strings), and the GNU C Library contains a set of functions that take
additional parameters specifying the maximal number of bytes that are
consumed from the input string.  This way the problem of `mbsrtowcs''s
example above could be solved by determining the line length and
passing this length to the function.

 -- Function: size_t wcsrtombs (char *restrict DST, const wchar_t
          **restrict SRC, size_t LEN, mbstate_t *restrict PS)
     Preliminary: | MT-Unsafe race:wcsrtombs/!ps | AS-Unsafe corrupt
     heap lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX
     Safety Concepts::.

     The `wcsrtombs' function ("wide character string restartable to
     multibyte string") converts the NUL-terminated wide character
     string at `*SRC' into an equivalent multibyte character string and
     stores the result in the array pointed to by DST.  The NUL wide
     character is also converted.  The conversion starts in the state
     described in the object pointed to by PS or by a state object
     local to `wcsrtombs' in case PS is a null pointer.  If DST is a
     null pointer, the conversion is performed as usual but the result
     is not available.  If all characters of the input string were
     successfully converted and if DST is not a null pointer, the
     pointer pointed to by SRC gets assigned a null pointer.

     If one of the wide characters in the input string has no valid
     multibyte character equivalent, the conversion stops early, sets
     the global variable `errno' to `EILSEQ', and returns `(size_t) -1'.

     Another reason for a premature stop is if DST is not a null
     pointer and the next converted character would require more than
     LEN bytes in total to the array DST.  In this case (and if DST is
     not a null pointer) the pointer pointed to by SRC is assigned a
     value pointing to the wide character right after the last one
     successfully converted.

     Except in the case of an encoding error the return value of the
     `wcsrtombs' function is the number of bytes in all the multibyte
     character sequences stored in DST.  Before returning, the state in
     the object pointed to by PS (or the internal object in case PS is
     a null pointer) is updated to reflect the state after the last
     conversion.  The state is the initial shift state in case the
     terminating NUL wide character was converted.

     The `wcsrtombs' function was introduced in Amendment 1 to ISO C90
     and is declared in `wchar.h'.

   The restriction mentioned above for the `mbsrtowcs' function applies
here also.  There is no possibility of directly controlling the number
of input characters.  One has to place the NUL wide character at the
correct place or control the consumed input indirectly via the
available output array size (the LEN parameter).

 -- Function: size_t mbsnrtowcs (wchar_t *restrict DST, const char
          **restrict SRC, size_t NMC, size_t LEN, mbstate_t *restrict
          PS)
     Preliminary: | MT-Unsafe race:mbsnrtowcs/!ps | AS-Unsafe corrupt
     heap lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX
     Safety Concepts::.

     The `mbsnrtowcs' function is very similar to the `mbsrtowcs'
     function.  All the parameters are the same except for NMC, which is
     new.  The return value is the same as for `mbsrtowcs'.

     This new parameter specifies how many bytes at most can be used
     from the multibyte character string.  In other words, the
     multibyte character string `*SRC' need not be NUL-terminated.  But
     if a NUL byte is found within the NMC first bytes of the string,
     the conversion stops there.

     This function is a GNU extension.  It is meant to work around the
     problems mentioned above.  Now it is possible to convert a buffer
     with multibyte character text piece by piece without having to
     care about inserting NUL bytes and the effect of NUL bytes on the
     conversion state.

   A function to convert a multibyte string into a wide character string
and display it could be written like this (this is not a really useful
example):

     void
     showmbs (const char *src, FILE *fp)
     {
       mbstate_t state;
       int cnt = 0;
       memset (&state, '\0', sizeof (state));
       while (1)
         {
           wchar_t linebuf[100];
           const char *endp = strchr (src, '\n');
           size_t n;

           /* Exit if there is no more line.  */
           if (endp == NULL)
             break;

           n = mbsnrtowcs (linebuf, &src, endp - src, 99, &state);
           linebuf[n] = L'\0';
           fprintf (fp, "line %d: \"%S\"\n", linebuf);
         }
     }

   There is no problem with the state after a call to `mbsnrtowcs'.
Since we don't insert characters in the strings that were not in there
right from the beginning and we use STATE only for the conversion of
the given buffer, there is no problem with altering the state.

 -- Function: size_t wcsnrtombs (char *restrict DST, const wchar_t
          **restrict SRC, size_t NWC, size_t LEN, mbstate_t *restrict
          PS)
     Preliminary: | MT-Unsafe race:wcsnrtombs/!ps | AS-Unsafe corrupt
     heap lock dlopen | AC-Unsafe corrupt lock mem fd | *Note POSIX
     Safety Concepts::.

     The `wcsnrtombs' function implements the conversion from wide
     character strings to multibyte character strings.  It is similar to
     `wcsrtombs' but, just like `mbsnrtowcs', it takes an extra
     parameter, which specifies the length of the input string.

     No more than NWC wide characters from the input string `*SRC' are
     converted.  If the input string contains a NUL wide character in
     the first NWC characters, the conversion stops at this place.

     The `wcsnrtombs' function is a GNU extension and just like
     `mbsnrtowcs' helps in situations where no NUL-terminated input
     strings are available.


File: libc.info,  Node: Multibyte Conversion Example,  Prev: Converting Strings,  Up: Restartable multibyte conversion

6.3.5 A Complete Multibyte Conversion Example
---------------------------------------------

The example programs given in the last sections are only brief and do
not contain all the error checking, etc.  Presented here is a complete
and documented example.  It features the `mbrtowc' function but it
should be easy to derive versions using the other functions.

     int
     file_mbsrtowcs (int input, int output)
     {
       /* Note the use of `MB_LEN_MAX'.
          `MB_CUR_MAX' cannot portably be used here.  */
       char buffer[BUFSIZ + MB_LEN_MAX];
       mbstate_t state;
       int filled = 0;
       int eof = 0;

       /* Initialize the state.  */
       memset (&state, '\0', sizeof (state));

       while (!eof)
         {
           ssize_t nread;
           ssize_t nwrite;
           char *inp = buffer;
           wchar_t outbuf[BUFSIZ];
           wchar_t *outp = outbuf;

           /* Fill up the buffer from the input file.  */
           nread = read (input, buffer + filled, BUFSIZ);
           if (nread < 0)
             {
               perror ("read");
               return 0;
             }
           /* If we reach end of file, make a note to read no more. */
           if (nread == 0)
             eof = 1;

           /* `filled' is now the number of bytes in `buffer'. */
           filled += nread;

           /* Convert those bytes to wide characters-as many as we can. */
           while (1)
             {
               size_t thislen = mbrtowc (outp, inp, filled, &state);
               /* Stop converting at invalid character;
                  this can mean we have read just the first part
                  of a valid character.  */
               if (thislen == (size_t) -1)
                 break;
               /* We want to handle embedded NUL bytes
                  but the return value is 0.  Correct this.  */
               if (thislen == 0)
                 thislen = 1;
               /* Advance past this character. */
               inp += thislen;
               filled -= thislen;
               ++outp;
             }

           /* Write the wide characters we just made.  */
           nwrite = write (output, outbuf,
                           (outp - outbuf) * sizeof (wchar_t));
           if (nwrite < 0)
             {
               perror ("write");
               return 0;
             }

           /* See if we have a _real_ invalid character. */
           if ((eof && filled > 0) || filled >= MB_CUR_MAX)
             {
               error (0, 0, "invalid multibyte character");
               return 0;
             }

           /* If any characters must be carried forward,
              put them at the beginning of `buffer'. */
           if (filled > 0)
             memmove (buffer, inp, filled);
         }

       return 1;
     }


File: libc.info,  Node: Non-reentrant Conversion,  Next: Generic Charset Conversion,  Prev: Restartable multibyte conversion,  Up: Character Set Handling

6.4 Non-reentrant Conversion Function
=====================================

The functions described in the previous chapter are defined in
Amendment 1 to ISO C90, but the original ISO C90 standard also
contained functions for character set conversion.  The reason that
these original functions are not described first is that they are almost
entirely useless.

   The problem is that all the conversion functions described in the
original ISO C90 use a local state.  Using a local state implies that
multiple conversions at the same time (not only when using threads)
cannot be done, and that you cannot first convert single characters and
then strings since you cannot tell the conversion functions which state
to use.

   These original functions are therefore usable only in a very limited
set of situations.  One must complete converting the entire string
before starting a new one, and each string/text must be converted with
the same function (there is no problem with the library itself; it is
guaranteed that no library function changes the state of any of these
functions).  *For the above reasons it is highly requested that the
functions described in the previous section be used in place of
non-reentrant conversion functions.*

* Menu:

* Non-reentrant Character Conversion::  Non-reentrant Conversion of Single
                                         Characters.
* Non-reentrant String Conversion::     Non-reentrant Conversion of Strings.
* Shift State::                         States in Non-reentrant Functions.


File: libc.info,  Node: Non-reentrant Character Conversion,  Next: Non-reentrant String Conversion,  Up: Non-reentrant Conversion

6.4.1 Non-reentrant Conversion of Single Characters
---------------------------------------------------

 -- Function: int mbtowc (wchar_t *restrict RESULT, const char
          *restrict STRING, size_t SIZE)
     Preliminary: | MT-Unsafe race | AS-Unsafe corrupt heap lock dlopen
     | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The `mbtowc' ("multibyte to wide character") function when called
     with non-null STRING converts the first multibyte character
     beginning at STRING to its corresponding wide character code.  It
     stores the result in `*RESULT'.

     `mbtowc' never examines more than SIZE bytes.  (The idea is to
     supply for SIZE the number of bytes of data you have in hand.)

     `mbtowc' with non-null STRING distinguishes three possibilities:
     the first SIZE bytes at STRING start with valid multibyte
     characters, they start with an invalid byte sequence or just part
     of a character, or STRING points to an empty string (a null
     character).

     For a valid multibyte character, `mbtowc' converts it to a wide
     character and stores that in `*RESULT', and returns the number of
     bytes in that character (always at least 1 and never more than
     SIZE).

     For an invalid byte sequence, `mbtowc' returns -1.  For an empty
     string, it returns 0, also storing `'\0'' in `*RESULT'.

     If the multibyte character code uses shift characters, then
     `mbtowc' maintains and updates a shift state as it scans.  If you
     call `mbtowc' with a null pointer for STRING, that initializes the
     shift state to its standard initial value.  It also returns
     nonzero if the multibyte character code in use actually has a
     shift state.  *Note Shift State::.

 -- Function: int wctomb (char *STRING, wchar_t WCHAR)
     Preliminary: | MT-Unsafe race | AS-Unsafe corrupt heap lock dlopen
     | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The `wctomb' ("wide character to multibyte") function converts the
     wide character code WCHAR to its corresponding multibyte character
     sequence, and stores the result in bytes starting at STRING.  At
     most `MB_CUR_MAX' characters are stored.

     `wctomb' with non-null STRING distinguishes three possibilities
     for WCHAR: a valid wide character code (one that can be translated
     to a multibyte character), an invalid code, and `L'\0''.

     Given a valid code, `wctomb' converts it to a multibyte character,
     storing the bytes starting at STRING.  Then it returns the number
     of bytes in that character (always at least 1 and never more than
     `MB_CUR_MAX').

     If WCHAR is an invalid wide character code, `wctomb' returns -1.
     If WCHAR is `L'\0'', it returns `0', also storing `'\0'' in
     `*STRING'.

     If the multibyte character code uses shift characters, then
     `wctomb' maintains and updates a shift state as it scans.  If you
     call `wctomb' with a null pointer for STRING, that initializes the
     shift state to its standard initial value.  It also returns
     nonzero if the multibyte character code in use actually has a
     shift state.  *Note Shift State::.

     Calling this function with a WCHAR argument of zero when STRING is
     not null has the side-effect of reinitializing the stored shift
     state _as well as_ storing the multibyte character `'\0'' and
     returning 0.

   Similar to `mbrlen' there is also a non-reentrant function that
computes the length of a multibyte character.  It can be defined in
terms of `mbtowc'.

 -- Function: int mblen (const char *STRING, size_t SIZE)
     Preliminary: | MT-Unsafe race | AS-Unsafe corrupt heap lock dlopen
     | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The `mblen' function with a non-null STRING argument returns the
     number of bytes that make up the multibyte character beginning at
     STRING, never examining more than SIZE bytes.  (The idea is to
     supply for SIZE the number of bytes of data you have in hand.)

     The return value of `mblen' distinguishes three possibilities: the
     first SIZE bytes at STRING start with valid multibyte characters,
     they start with an invalid byte sequence or just part of a
     character, or STRING points to an empty string (a null character).

     For a valid multibyte character, `mblen' returns the number of
     bytes in that character (always at least `1' and never more than
     SIZE).  For an invalid byte sequence, `mblen' returns -1.  For an
     empty string, it returns 0.

     If the multibyte character code uses shift characters, then `mblen'
     maintains and updates a shift state as it scans.  If you call
     `mblen' with a null pointer for STRING, that initializes the shift
     state to its standard initial value.  It also returns a nonzero
     value if the multibyte character code in use actually has a shift
     state.  *Note Shift State::.

     The function `mblen' is declared in `stdlib.h'.


File: libc.info,  Node: Non-reentrant String Conversion,  Next: Shift State,  Prev: Non-reentrant Character Conversion,  Up: Non-reentrant Conversion

6.4.2 Non-reentrant Conversion of Strings
-----------------------------------------

For convenience the ISO C90 standard also defines functions to convert
entire strings instead of single characters.  These functions suffer
from the same problems as their reentrant counterparts from Amendment 1
to ISO C90; see *Note Converting Strings::.

 -- Function: size_t mbstowcs (wchar_t *WSTRING, const char *STRING,
          size_t SIZE)
     Preliminary: | MT-Safe | AS-Unsafe corrupt heap lock dlopen |
     AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The `mbstowcs' ("multibyte string to wide character string")
     function converts the null-terminated string of multibyte
     characters STRING to an array of wide character codes, storing not
     more than SIZE wide characters into the array beginning at WSTRING.
     The terminating null character counts towards the size, so if SIZE
     is less than the actual number of wide characters resulting from
     STRING, no terminating null character is stored.

     The conversion of characters from STRING begins in the initial
     shift state.

     If an invalid multibyte character sequence is found, the `mbstowcs'
     function returns a value of -1.  Otherwise, it returns the number
     of wide characters stored in the array WSTRING.  This number does
     not include the terminating null character, which is present if the
     number is less than SIZE.

     Here is an example showing how to convert a string of multibyte
     characters, allocating enough space for the result.

          wchar_t *
          mbstowcs_alloc (const char *string)
          {
            size_t size = strlen (string) + 1;
            wchar_t *buf = xmalloc (size * sizeof (wchar_t));

            size = mbstowcs (buf, string, size);
            if (size == (size_t) -1)
              return NULL;
            buf = xrealloc (buf, (size + 1) * sizeof (wchar_t));
            return buf;
          }


 -- Function: size_t wcstombs (char *STRING, const wchar_t *WSTRING,
          size_t SIZE)
     Preliminary: | MT-Safe | AS-Unsafe corrupt heap lock dlopen |
     AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The `wcstombs' ("wide character string to multibyte string")
     function converts the null-terminated wide character array WSTRING
     into a string containing multibyte characters, storing not more
     than SIZE bytes starting at STRING, followed by a terminating null
     character if there is room.  The conversion of characters begins in
     the initial shift state.

     The terminating null character counts towards the size, so if SIZE
     is less than or equal to the number of bytes needed in WSTRING, no
     terminating null character is stored.

     If a code that does not correspond to a valid multibyte character
     is found, the `wcstombs' function returns a value of -1.
     Otherwise, the return value is the number of bytes stored in the
     array STRING.  This number does not include the terminating null
     character, which is present if the number is less than SIZE.


File: libc.info,  Node: Shift State,  Prev: Non-reentrant String Conversion,  Up: Non-reentrant Conversion

6.4.3 States in Non-reentrant Functions
---------------------------------------

In some multibyte character codes, the _meaning_ of any particular byte
sequence is not fixed; it depends on what other sequences have come
earlier in the same string.  Typically there are just a few sequences
that can change the meaning of other sequences; these few are called
"shift sequences" and we say that they set the "shift state" for other
sequences that follow.

   To illustrate shift state and shift sequences, suppose we decide that
the sequence `0200' (just one byte) enters Japanese mode, in which
pairs of bytes in the range from `0240' to `0377' are single
characters, while `0201' enters Latin-1 mode, in which single bytes in
the range from `0240' to `0377' are characters, and interpreted
according to the ISO Latin-1 character set.  This is a multibyte code
that has two alternative shift states ("Japanese mode" and "Latin-1
mode"), and two shift sequences that specify particular shift states.

   When the multibyte character code in use has shift states, then
`mblen', `mbtowc', and `wctomb' must maintain and update the current
shift state as they scan the string.  To make this work properly, you
must follow these rules:

   * Before starting to scan a string, call the function with a null
     pointer for the multibyte character address--for example, `mblen
     (NULL, 0)'.  This initializes the shift state to its standard
     initial value.

   * Scan the string one character at a time, in order.  Do not "back
     up" and rescan characters already scanned, and do not intersperse
     the processing of different strings.

   Here is an example of using `mblen' following these rules:

     void
     scan_string (char *s)
     {
       int length = strlen (s);

       /* Initialize shift state.  */
       mblen (NULL, 0);

       while (1)
         {
           int thischar = mblen (s, length);
           /* Deal with end of string and invalid characters.  */
           if (thischar == 0)
             break;
           if (thischar == -1)
             {
               error ("invalid multibyte character");
               break;
             }
           /* Advance past this character.  */
           s += thischar;
           length -= thischar;
         }
     }

   The functions `mblen', `mbtowc' and `wctomb' are not reentrant when
using a multibyte code that uses a shift state.  However, no other
library functions call these functions, so you don't have to worry that
the shift state will be changed mysteriously.


File: libc.info,  Node: Generic Charset Conversion,  Prev: Non-reentrant Conversion,  Up: Character Set Handling

6.5 Generic Charset Conversion
==============================

The conversion functions mentioned so far in this chapter all had in
common that they operate on character sets that are not directly
specified by the functions.  The multibyte encoding used is specified by
the currently selected locale for the `LC_CTYPE' category.  The wide
character set is fixed by the implementation (in the case of the GNU C
Library it is always UCS-4 encoded ISO 10646).

   This has of course several problems when it comes to general
character conversion:

   * For every conversion where neither the source nor the destination
     character set is the character set of the locale for the `LC_CTYPE'
     category, one has to change the `LC_CTYPE' locale using
     `setlocale'.

     Changing the `LC_CTYPE' locale introduces major problems for the
     rest of the programs since several more functions (e.g., the
     character classification functions, *note Classification of
     Characters::) use the `LC_CTYPE' category.

   * Parallel conversions to and from different character sets are not
     possible since the `LC_CTYPE' selection is global and shared by all
     threads.

   * If neither the source nor the destination character set is the
     character set used for `wchar_t' representation, there is at least
     a two-step process necessary to convert a text using the functions
     above.  One would have to select the source character set as the
     multibyte encoding, convert the text into a `wchar_t' text, select
     the destination character set as the multibyte encoding, and
     convert the wide character text to the multibyte (= destination)
     character set.

     Even if this is possible (which is not guaranteed) it is a very
     tiring work.  Plus it suffers from the other two raised points
     even more due to the steady changing of the locale.

   The XPG2 standard defines a completely new set of functions, which
has none of these limitations.  They are not at all coupled to the
selected locales, and they have no constraints on the character sets
selected for source and destination.  Only the set of available
conversions limits them.  The standard does not specify that any
conversion at all must be available.  Such availability is a measure of
the quality of the implementation.

   In the following text first the interface to `iconv' and then the
conversion function, will be described.  Comparisons with other
implementations will show what obstacles stand in the way of portable
applications.  Finally, the implementation is described in so far as
might interest the advanced user who wants to extend conversion
capabilities.

* Menu:

* Generic Conversion Interface::    Generic Character Set Conversion Interface.
* iconv Examples::                  A complete `iconv' example.
* Other iconv Implementations::     Some Details about other `iconv'
                                     Implementations.
* glibc iconv Implementation::      The `iconv' Implementation in the GNU C
                                     library.


File: libc.info,  Node: Generic Conversion Interface,  Next: iconv Examples,  Up: Generic Charset Conversion

6.5.1 Generic Character Set Conversion Interface
------------------------------------------------

This set of functions follows the traditional cycle of using a resource:
open-use-close.  The interface consists of three functions, each of
which implements one step.

   Before the interfaces are described it is necessary to introduce a
data type.  Just like other open-use-close interfaces the functions
introduced here work using handles and the `iconv.h' header defines a
special type for the handles used.

 -- Data Type: iconv_t
     This data type is an abstract type defined in `iconv.h'.  The user
     must not assume anything about the definition of this type; it
     must be completely opaque.

     Objects of this type can be assigned handles for the conversions
     using the `iconv' functions.  The objects themselves need not be
     freed, but the conversions for which the handles stand for have to.

The first step is the function to create a handle.

 -- Function: iconv_t iconv_open (const char *TOCODE, const char
          *FROMCODE)
     Preliminary: | MT-Safe locale | AS-Unsafe corrupt heap lock dlopen
     | AC-Unsafe corrupt lock mem fd | *Note POSIX Safety Concepts::.

     The `iconv_open' function has to be used before starting a
     conversion.  The two parameters this function takes determine the
     source and destination character set for the conversion, and if the
     implementation has the possibility to perform such a conversion,
     the function returns a handle.

     If the wanted conversion is not available, the `iconv_open'
     function returns `(iconv_t) -1'.  In this case the global variable
     `errno' can have the following values:

    `EMFILE'
          The process already has `OPEN_MAX' file descriptors open.

    `ENFILE'
          The system limit of open files is reached.

    `ENOMEM'
          Not enough memory to carry out the operation.

    `EINVAL'
          The conversion from FROMCODE to TOCODE is not supported.

     It is not possible to use the same descriptor in different threads
     to perform independent conversions.  The data structures associated
     with the descriptor include information about the conversion state.
     This must not be messed up by using it in different conversions.

     An `iconv' descriptor is like a file descriptor as for every use a
     new descriptor must be created.  The descriptor does not stand for
     all of the conversions from FROMSET to TOSET.

     The GNU C Library implementation of `iconv_open' has one
     significant extension to other implementations.  To ease the
     extension of the set of available conversions, the implementation
     allows storing the necessary files with data and code in an
     arbitrary number of directories.  How this extension must be
     written will be explained below (*note glibc iconv
     Implementation::).  Here it is only important to say that all
     directories mentioned in the `GCONV_PATH' environment variable are
     considered only if they contain a file `gconv-modules'.  These
     directories need not necessarily be created by the system
     administrator.  In fact, this extension is introduced to help users
     writing and using their own, new conversions.  Of course, this
     does not work for security reasons in SUID binaries; in this case
     only the system directory is considered and this normally is
     `PREFIX/lib/gconv'.  The `GCONV_PATH' environment variable is
     examined exactly once at the first call of the `iconv_open'
     function.  Later modifications of the variable have no effect.

     The `iconv_open' function was introduced early in the X/Open
     Portability Guide, version 2.  It is supported by all commercial
     Unices as it is required for the Unix branding.  However, the
     quality and completeness of the implementation varies widely.  The
     `iconv_open' function is declared in `iconv.h'.

   The `iconv' implementation can associate large data structure with
the handle returned by `iconv_open'.  Therefore, it is crucial to free
all the resources once all conversions are carried out and the
conversion is not needed anymore.

 -- Function: int iconv_close (iconv_t CD)
     Preliminary: | MT-Safe | AS-Unsafe corrupt heap lock dlopen |
     AC-Unsafe corrupt lock mem | *Note POSIX Safety Concepts::.

     The `iconv_close' function frees all resources associated with the
     handle CD, which must have been returned by a successful call to
     the `iconv_open' function.

     If the function call was successful the return value is 0.
     Otherwise it is -1 and `errno' is set appropriately.  Defined
     errors are:

    `EBADF'
          The conversion descriptor is invalid.

     The `iconv_close' function was introduced together with the rest
     of the `iconv' functions in XPG2 and is declared in `iconv.h'.

   The standard defines only one actual conversion function.  This has,
therefore, the most general interface: it allows conversion from one
buffer to another.  Conversion from a file to a buffer, vice versa, or
even file to file can be implemented on top of it.

 -- Function: size_t iconv (iconv_t CD, char **INBUF, size_t
          *INBYTESLEFT, char **OUTBUF, size_t *OUTBYTESLEFT)
     Preliminary: | MT-Safe race:cd | AS-Safe | AC-Unsafe corrupt |
     *Note POSIX Safety Concepts::.

     The `iconv' function converts the text in the input buffer
     according to the rules associated with the descriptor CD and
     stores the result in the output buffer.  It is possible to call the
     function for the same text several times in a row since for
     stateful character sets the necessary state information is kept in
     the data structures associated with the descriptor.

     The input buffer is specified by `*INBUF' and it contains
     `*INBYTESLEFT' bytes.  The extra indirection is necessary for
     communicating the used input back to the caller (see below).  It is
     important to note that the buffer pointer is of type `char' and the
     length is measured in bytes even if the input text is encoded in
     wide characters.

     The output buffer is specified in a similar way.  `*OUTBUF' points
     to the beginning of the buffer with at least `*OUTBYTESLEFT' bytes
     room for the result.  The buffer pointer again is of type `char'
     and the length is measured in bytes.  If OUTBUF or `*OUTBUF' is a
     null pointer, the conversion is performed but no output is
     available.

     If INBUF is a null pointer, the `iconv' function performs the
     necessary action to put the state of the conversion into the
     initial state.  This is obviously a no-op for non-stateful
     encodings, but if the encoding has a state, such a function call
     might put some byte sequences in the output buffer, which perform
     the necessary state changes.  The next call with INBUF not being a
     null pointer then simply goes on from the initial state.  It is
     important that the programmer never makes any assumption as to
     whether the conversion has to deal with states.  Even if the input
     and output character sets are not stateful, the implementation
     might still have to keep states.  This is due to the
     implementation chosen for the GNU C Library as it is described
     below.  Therefore an `iconv' call to reset the state should always
     be performed if some protocol requires this for the output text.

     The conversion stops for one of three reasons.  The first is that
     all characters from the input buffer are converted.  This actually
     can mean two things: either all bytes from the input buffer are
     consumed or there are some bytes at the end of the buffer that
     possibly can form a complete character but the input is
     incomplete.  The second reason for a stop is that the output
     buffer is full.  And the third reason is that the input contains
     invalid characters.

     In all of these cases the buffer pointers after the last successful
     conversion, for the input and output buffers, are stored in INBUF
     and OUTBUF, and the available room in each buffer is stored in
     INBYTESLEFT and OUTBYTESLEFT.

     Since the character sets selected in the `iconv_open' call can be
     almost arbitrary, there can be situations where the input buffer
     contains valid characters, which have no identical representation
     in the output character set.  The behavior in this situation is
     undefined.  The _current_ behavior of the GNU C Library in this
     situation is to return with an error immediately.  This certainly
     is not the most desirable solution; therefore, future versions
     will provide better ones, but they are not yet finished.

     If all input from the input buffer is successfully converted and
     stored in the output buffer, the function returns the number of
     non-reversible conversions performed.  In all other cases the
     return value is `(size_t) -1' and `errno' is set appropriately.
     In such cases the value pointed to by INBYTESLEFT is nonzero.

    `EILSEQ'
          The conversion stopped because of an invalid byte sequence in
          the input.  After the call, `*INBUF' points at the first byte
          of the invalid byte sequence.

    `E2BIG'
          The conversion stopped because it ran out of space in the
          output buffer.

    `EINVAL'
          The conversion stopped because of an incomplete byte sequence
          at the end of the input buffer.

    `EBADF'
          The CD argument is invalid.

     The `iconv' function was introduced in the XPG2 standard and is
     declared in the `iconv.h' header.

   The definition of the `iconv' function is quite good overall.  It
provides quite flexible functionality.  The only problems lie in the
boundary cases, which are incomplete byte sequences at the end of the
input buffer and invalid input.  A third problem, which is not really a
design problem, is the way conversions are selected.  The standard does
not say anything about the legitimate names, a minimal set of available
conversions.  We will see how this negatively impacts other
implementations, as demonstrated below.


File: libc.info,  Node: iconv Examples,  Next: Other iconv Implementations,  Prev: Generic Conversion Interface,  Up: Generic Charset Conversion

6.5.2 A complete `iconv' example
--------------------------------

The example below features a solution for a common problem.  Given that
one knows the internal encoding used by the system for `wchar_t'
strings, one often is in the position to read text from a file and store
it in wide character buffers.  One can do this using `mbsrtowcs', but
then we run into the problems discussed above.

     int
     file2wcs (int fd, const char *charset, wchar_t *outbuf, size_t avail)
     {
       char inbuf[BUFSIZ];
       size_t insize = 0;
       char *wrptr = (char *) outbuf;
       int result = 0;
       iconv_t cd;

       cd = iconv_open ("WCHAR_T", charset);
       if (cd == (iconv_t) -1)
         {
           /* Something went wrong.  */
           if (errno == EINVAL)
             error (0, 0, "conversion from '%s' to wchar_t not available",
                    charset);
           else
             perror ("iconv_open");

           /* Terminate the output string.  */
           *outbuf = L'\0';

           return -1;
         }

       while (avail > 0)
         {
           size_t nread;
           size_t nconv;
           char *inptr = inbuf;

           /* Read more input.  */
           nread = read (fd, inbuf + insize, sizeof (inbuf) - insize);
           if (nread == 0)
             {
               /* When we come here the file is completely read.
                  This still could mean there are some unused
                  characters in the `inbuf'.  Put them back.  */
               if (lseek (fd, -insize, SEEK_CUR) == -1)
                 result = -1;

               /* Now write out the byte sequence to get into the
                  initial state if this is necessary.  */
               iconv (cd, NULL, NULL, &wrptr, &avail);

               break;
             }
           insize += nread;

           /* Do the conversion.  */
           nconv = iconv (cd, &inptr, &insize, &wrptr, &avail);
           if (nconv == (size_t) -1)
             {
               /* Not everything went right.  It might only be
                  an unfinished byte sequence at the end of the
                  buffer.  Or it is a real problem.  */
               if (errno == EINVAL)
                 /* This is harmless.  Simply move the unused
                    bytes to the beginning of the buffer so that
                    they can be used in the next round.  */
                 memmove (inbuf, inptr, insize);
               else
                 {
                   /* It is a real problem.  Maybe we ran out of
                      space in the output buffer or we have invalid
                      input.  In any case back the file pointer to
                      the position of the last processed byte.  */
                   lseek (fd, -insize, SEEK_CUR);
                   result = -1;
                   break;
                 }
             }
         }

       /* Terminate the output string.  */
       if (avail >= sizeof (wchar_t))
         *((wchar_t *) wrptr) = L'\0';

       if (iconv_close (cd) != 0)
         perror ("iconv_close");

       return (wchar_t *) wrptr - outbuf;
     }

   This example shows the most important aspects of using the `iconv'
functions.  It shows how successive calls to `iconv' can be used to
convert large amounts of text.  The user does not have to care about
stateful encodings as the functions take care of everything.

   An interesting point is the case where `iconv' returns an error and
`errno' is set to `EINVAL'.  This is not really an error in the
transformation.  It can happen whenever the input character set contains
byte sequences of more than one byte for some character and texts are
not processed in one piece.  In this case there is a chance that a
multibyte sequence is cut.  The caller can then simply read the
remainder of the takes and feed the offending bytes together with new
character from the input to `iconv' and continue the work.  The
internal state kept in the descriptor is _not_ unspecified after such
an event as is the case with the conversion functions from the ISO C
standard.

   The example also shows the problem of using wide character strings
with `iconv'.  As explained in the description of the `iconv' function
above, the function always takes a pointer to a `char' array and the
available space is measured in bytes.  In the example, the output
buffer is a wide character buffer; therefore, we use a local variable
WRPTR of type `char *', which is used in the `iconv' calls.

   This looks rather innocent but can lead to problems on platforms that
have tight restriction on alignment.  Therefore the caller of `iconv'
has to make sure that the pointers passed are suitable for access of
characters from the appropriate character set.  Since, in the above
case, the input parameter to the function is a `wchar_t' pointer, this
is the case (unless the user violates alignment when computing the
parameter).  But in other situations, especially when writing generic
functions where one does not know what type of character set one uses
and, therefore, treats text as a sequence of bytes, it might become
tricky.


File: libc.info,  Node: Other iconv Implementations,  Next: glibc iconv Implementation,  Prev: iconv Examples,  Up: Generic Charset Conversion

6.5.3 Some Details about other `iconv' Implementations
------------------------------------------------------

This is not really the place to discuss the `iconv' implementation of
other systems but it is necessary to know a bit about them to write
portable programs.  The above mentioned problems with the specification
of the `iconv' functions can lead to portability issues.

   The first thing to notice is that, due to the large number of
character sets in use, it is certainly not practical to encode the
conversions directly in the C library.  Therefore, the conversion
information must come from files outside the C library.  This is
usually done in one or both of the following ways:

   * The C library contains a set of generic conversion functions that
     can read the needed conversion tables and other information from
     data files.  These files get loaded when necessary.

     This solution is problematic as it requires a great deal of effort
     to apply to all character sets (potentially an infinite set).  The
     differences in the structure of the different character sets is so
     large that many different variants of the table-processing
     functions must be developed.  In addition, the generic nature of
     these functions make them slower than specifically implemented
     functions.

   * The C library only contains a framework that can dynamically load
     object files and execute the conversion functions contained
     therein.

     This solution provides much more flexibility.  The C library itself
     contains only very little code and therefore reduces the general
     memory footprint.  Also, with a documented interface between the C
     library and the loadable modules it is possible for third parties
     to extend the set of available conversion modules.  A drawback of
     this solution is that dynamic loading must be available.

   Some implementations in commercial Unices implement a mixture of
these possibilities; the majority implement only the second solution.
Using loadable modules moves the code out of the library itself and
keeps the door open for extensions and improvements, but this design is
also limiting on some platforms since not many platforms support dynamic
loading in statically linked programs.  On platforms without this
capability it is therefore not possible to use this interface in
statically linked programs.  The GNU C Library has, on ELF platforms, no
problems with dynamic loading in these situations; therefore, this
point is moot.  The danger is that one gets acquainted with this
situation and forgets about the restrictions on other systems.

   A second thing to know about other `iconv' implementations is that
the number of available conversions is often very limited.  Some
implementations provide, in the standard release (not special
international or developer releases), at most 100 to 200 conversion
possibilities.  This does not mean 200 different character sets are
supported; for example, conversions from one character set to a set of
10 others might count as 10 conversions.  Together with the other
direction this makes 20 conversion possibilities used up by one
character set.  One can imagine the thin coverage these platforms
provide.  Some Unix vendors even provide only a handful of conversions,
which renders them useless for almost all uses.

   This directly leads to a third and probably the most problematic
point.  The way the `iconv' conversion functions are implemented on all
known Unix systems and the availability of the conversion functions from
character set A to B and the conversion from B to C does _not_ imply
that the conversion from A to C is available.

   This might not seem unreasonable and problematic at first, but it is
a quite big problem as one will notice shortly after hitting it.  To
show the problem we assume to write a program that has to convert from
A to C.  A call like

     cd = iconv_open ("C", "A");

fails according to the assumption above.  But what does the program do
now?  The conversion is necessary; therefore, simply giving up is not
an option.

   This is a nuisance.  The `iconv' function should take care of this.
But how should the program proceed from here on?  If it tries to convert
to character set B, first the two `iconv_open' calls

     cd1 = iconv_open ("B", "A");

and

     cd2 = iconv_open ("C", "B");

will succeed, but how to find B?

   Unfortunately, the answer is: there is no general solution.  On some
systems guessing might help.  On those systems most character sets can
convert to and from UTF-8 encoded ISO 10646 or Unicode text.  Besides
this only some very system-specific methods can help.  Since the
conversion functions come from loadable modules and these modules must
be stored somewhere in the filesystem, one _could_ try to find them and
determine from the available file which conversions are available and
whether there is an indirect route from A to C.

   This example shows one of the design errors of `iconv' mentioned
above.  It should at least be possible to determine the list of
available conversions programmatically so that if `iconv_open' says
there is no such conversion, one could make sure this also is true for
indirect routes.


File: libc.info,  Node: glibc iconv Implementation,  Prev: Other iconv Implementations,  Up: Generic Charset Conversion

6.5.4 The `iconv' Implementation in the GNU C Library
-----------------------------------------------------

After reading about the problems of `iconv' implementations in the last
section it is certainly good to note that the implementation in the GNU
C Library has none of the problems mentioned above.  What follows is a
step-by-step analysis of the points raised above.  The evaluation is
based on the current state of the development (as of January 1999).
The development of the `iconv' functions is not complete, but basic
functionality has solidified.

   The GNU C Library's `iconv' implementation uses shared loadable
modules to implement the conversions.  A very small number of
conversions are built into the library itself but these are only rather
trivial conversions.

   All the benefits of loadable modules are available in the GNU C
Library implementation.  This is especially appealing since the
interface is well documented (see below), and it, therefore, is easy to
write new conversion modules.  The drawback of using loadable objects
is not a problem in the GNU C Library, at least on ELF systems.  Since
the library is able to load shared objects even in statically linked
binaries, static linking need not be forbidden in case one wants to use
`iconv'.

   The second mentioned problem is the number of supported conversions.
Currently, the GNU C Library supports more than 150 character sets.  The
way the implementation is designed the number of supported conversions
is greater than 22350 (150 times 149).  If any conversion from or to a
character set is missing, it can be added easily.

   Particularly impressive as it may be, this high number is due to the
fact that the GNU C Library implementation of `iconv' does not have the
third problem mentioned above (i.e., whenever there is a conversion
from a character set A to B and from B to C it is always possible to
convert from A to C directly).  If the `iconv_open' returns an error
and sets `errno' to `EINVAL', there is no known way, directly or
indirectly, to perform the wanted conversion.

   Triangulation is achieved by providing for each character set a
conversion from and to UCS-4 encoded ISO 10646.  Using ISO 10646 as an
intermediate representation it is possible to "triangulate" (i.e.,
convert with an intermediate representation).

   There is no inherent requirement to provide a conversion to
ISO 10646 for a new character set, and it is also possible to provide
other conversions where neither source nor destination character set is
ISO 10646.  The existing set of conversions is simply meant to cover all
conversions that might be of interest.

   All currently available conversions use the triangulation method
above, making conversion run unnecessarily slow.  If, for example,
somebody often needs the conversion from ISO-2022-JP to EUC-JP, a
quicker solution would involve direct conversion between the two
character sets, skipping the input to ISO 10646 first.  The two
character sets of interest are much more similar to each other than to
ISO 10646.

   In such a situation one easily can write a new conversion and
provide it as a better alternative.  The GNU C Library `iconv'
implementation would automatically use the module implementing the
conversion if it is specified to be more efficient.

6.5.4.1 Format of `gconv-modules' files
.......................................

All information about the available conversions comes from a file named
`gconv-modules', which can be found in any of the directories along the
`GCONV_PATH'.  The `gconv-modules' files are line-oriented text files,
where each of the lines has one of the following formats:

   * If the first non-whitespace character is a `#' the line contains
     only comments and is ignored.

   * Lines starting with `alias' define an alias name for a character
     set.  Two more words are expected on the line.  The first word
     defines the alias name, and the second defines the original name
     of the character set.  The effect is that it is possible to use
     the alias name in the FROMSET or TOSET parameters of `iconv_open'
     and achieve the same result as when using the real character set
     name.

     This is quite important as a character set has often many different
     names.  There is normally an official name but this need not
     correspond to the most popular name.  Besides this many character
     sets have special names that are somehow constructed.  For
     example, all character sets specified by the ISO have an alias of
     the form `ISO-IR-NNN' where NNN is the registration number.  This
     allows programs that know about the registration number to
     construct character set names and use them in `iconv_open' calls.
     More on the available names and aliases follows below.

   * Lines starting with `module' introduce an available conversion
     module.  These lines must contain three or four more words.

     The first word specifies the source character set, the second word
     the destination character set of conversion implemented in this
     module, and the third word is the name of the loadable module.
     The filename is constructed by appending the usual shared object
     suffix (normally `.so') and this file is then supposed to be found
     in the same directory the `gconv-modules' file is in.  The last
     word on the line, which is optional, is a numeric value
     representing the cost of the conversion.  If this word is missing,
     a cost of 1 is assumed.  The numeric value itself does not matter
     that much; what counts are the relative values of the sums of
     costs for all possible conversion paths.  Below is a more precise
     description of the use of the cost value.

   Returning to the example above where one has written a module to
directly convert from ISO-2022-JP to EUC-JP and back.  All that has to
be done is to put the new module, let its name be ISO2022JP-EUCJP.so,
in a directory and add a file `gconv-modules' with the following
content in the same directory:

     module  ISO-2022-JP//   EUC-JP//        ISO2022JP-EUCJP    1
     module  EUC-JP//        ISO-2022-JP//   ISO2022JP-EUCJP    1

   To see why this is sufficient, it is necessary to understand how the
conversion used by `iconv' (and described in the descriptor) is
selected.  The approach to this problem is quite simple.

   At the first call of the `iconv_open' function the program reads all
available `gconv-modules' files and builds up two tables: one
containing all the known aliases and another that contains the
information about the conversions and which shared object implements
them.

6.5.4.2 Finding the conversion path in `iconv'
..............................................

The set of available conversions form a directed graph with weighted
edges.  The weights on the edges are the costs specified in the
`gconv-modules' files.  The `iconv_open' function uses an algorithm
suitable for search for the best path in such a graph and so constructs
a list of conversions that must be performed in succession to get the
transformation from the source to the destination character set.

   Explaining why the above `gconv-modules' files allows the `iconv'
implementation to resolve the specific ISO-2022-JP to EUC-JP conversion
module instead of the conversion coming with the library itself is
straightforward.  Since the latter conversion takes two steps (from
ISO-2022-JP to ISO 10646 and then from ISO 10646 to EUC-JP), the cost
is 1+1 = 2.  The above `gconv-modules' file, however, specifies that
the new conversion modules can perform this conversion with only the
cost of 1.

   A mysterious item about the `gconv-modules' file above (and also the
file coming with the GNU C Library) are the names of the character sets
specified in the `module' lines.  Why do almost all the names end in
`//'?  And this is not all: the names can actually be regular
expressions.  At this point in time this mystery should not be
revealed, unless you have the relevant spell-casting materials: ashes
from an original DOS 6.2 boot disk burnt in effigy, a crucifix blessed
by St. Emacs, assorted herbal roots from Central America, sand from
Cebu, etc.  Sorry!  *The part of the implementation where this is used
is not yet finished.  For now please simply follow the existing
examples.  It'll become clearer once it is. -drepper*

   A last remark about the `gconv-modules' is about the names not
ending with `//'.  A character set named `INTERNAL' is often mentioned.
From the discussion above and the chosen name it should have become
clear that this is the name for the representation used in the
intermediate step of the triangulation.  We have said that this is UCS-4
but actually that is not quite right.  The UCS-4 specification also
includes the specification of the byte ordering used.  Since a UCS-4
value consists of four bytes, a stored value is affected by byte
ordering.  The internal representation is _not_ the same as UCS-4 in
case the byte ordering of the processor (or at least the running
process) is not the same as the one required for UCS-4.  This is done
for performance reasons as one does not want to perform unnecessary
byte-swapping operations if one is not interested in actually seeing
the result in UCS-4.  To avoid trouble with endianness, the internal
representation consistently is named `INTERNAL' even on big-endian
systems where the representations are identical.

6.5.4.3 `iconv' module data structures
......................................

So far this section has described how modules are located and considered
to be used.  What remains to be described is the interface of the
modules so that one can write new ones.  This section describes the
interface as it is in use in January 1999.  The interface will change a
bit in the future but, with luck, only in an upwardly compatible way.

   The definitions necessary to write new modules are publicly available
in the non-standard header `gconv.h'.  The following text, therefore,
describes the definitions from this header file.  First, however, it is
necessary to get an overview.

   From the perspective of the user of `iconv' the interface is quite
simple: the `iconv_open' function returns a handle that can be used in
calls to `iconv', and finally the handle is freed with a call to
`iconv_close'.  The problem is that the handle has to be able to
represent the possibly long sequences of conversion steps and also the
state of each conversion since the handle is all that is passed to the
`iconv' function.  Therefore, the data structures are really the
elements necessary to understanding the implementation.

   We need two different kinds of data structures.  The first describes
the conversion and the second describes the state etc.  There are
really two type definitions like this in `gconv.h'.  

 -- Data type: struct __gconv_step
     This data structure describes one conversion a module can perform.
     For each function in a loaded module with conversion functions
     there is exactly one object of this type.  This object is shared
     by all users of the conversion (i.e., this object does not contain
     any information corresponding to an actual conversion; it only
     describes the conversion itself).

    `struct __gconv_loaded_object *__shlib_handle'
    `const char *__modname'
    `int __counter'
          All these elements of the structure are used internally in
          the C library to coordinate loading and unloading the shared
          object.  One must not expect any of the other elements to be
          available or initialized.

    `const char *__from_name'
    `const char *__to_name'
          `__from_name' and `__to_name' contain the names of the source
          and destination character sets.  They can be used to identify
          the actual conversion to be carried out since one module
          might implement conversions for more than one character set
          and/or direction.

    `gconv_fct __fct'
    `gconv_init_fct __init_fct'
    `gconv_end_fct __end_fct'
          These elements contain pointers to the functions in the
          loadable module.  The interface will be explained below.

    `int __min_needed_from'
    `int __max_needed_from'
    `int __min_needed_to'
    `int __max_needed_to;'
          These values have to be supplied in the init function of the
          module.  The `__min_needed_from' value specifies how many
          bytes a character of the source character set at least needs.
          The `__max_needed_from' specifies the maximum value that
          also includes possible shift sequences.

          The `__min_needed_to' and `__max_needed_to' values serve the
          same purpose as `__min_needed_from' and `__max_needed_from'
          but this time for the destination character set.

          It is crucial that these values be accurate since otherwise
          the conversion functions will have problems or not work at
          all.

    `int __stateful'
          This element must also be initialized by the init function.
          `int __stateful' is nonzero if the source character set is
          stateful.  Otherwise it is zero.

    `void *__data'
          This element can be used freely by the conversion functions
          in the module.  `void *__data' can be used to communicate
          extra information from one call to another.  `void *__data'
          need not be initialized if not needed at all.  If `void
          *__data' element is assigned a pointer to dynamically
          allocated memory (presumably in the init function) it has to
          be made sure that the end function deallocates the memory.
          Otherwise the application will leak memory.

          It is important to be aware that this data structure is
          shared by all users of this specification conversion and
          therefore the `__data' element must not contain data specific
          to one specific use of the conversion function.

 -- Data type: struct __gconv_step_data
     This is the data structure that contains the information specific
     to each use of the conversion functions.

    `char *__outbuf'
    `char *__outbufend'
          These elements specify the output buffer for the conversion
          step.  The `__outbuf' element points to the beginning of the
          buffer, and `__outbufend' points to the byte following the
          last byte in the buffer.  The conversion function must not
          assume anything about the size of the buffer but it can be
          safely assumed there is room for at least one complete
          character in the output buffer.

          Once the conversion is finished, if the conversion is the
          last step, the `__outbuf' element must be modified to point
          after the last byte written into the buffer to signal how
          much output is available.  If this conversion step is not the
          last one, the element must not be modified.  The
          `__outbufend' element must not be modified.

    `int __is_last'
          This element is nonzero if this conversion step is the last
          one.  This information is necessary for the recursion.  See
          the description of the conversion function internals below.
          This element must never be modified.

    `int __invocation_counter'
          The conversion function can use this element to see how many
          calls of the conversion function already happened.  Some
          character sets require a certain prolog when generating
          output, and by comparing this value with zero, one can find
          out whether it is the first call and whether, therefore, the
          prolog should be emitted.  This element must never be
          modified.

    `int __internal_use'
          This element is another one rarely used but needed in certain
          situations.  It is assigned a nonzero value in case the
          conversion functions are used to implement `mbsrtowcs' et.al.
          (i.e., the function is not used directly through the `iconv'
          interface).

          This sometimes makes a difference as it is expected that the
          `iconv' functions are used to translate entire texts while the
          `mbsrtowcs' functions are normally used only to convert single
          strings and might be used multiple times to convert entire
          texts.

          But in this situation we would have problem complying with
          some rules of the character set specification.  Some
          character sets require a prolog, which must appear exactly
          once for an entire text.  If a number of `mbsrtowcs' calls
          are used to convert the text, only the first call must add
          the prolog.  However, because there is no communication
          between the different calls of `mbsrtowcs', the conversion
          functions have no possibility to find this out.  The
          situation is different for sequences of `iconv' calls since
          the handle allows access to the needed information.

          The `int __internal_use' element is mostly used together with
          `__invocation_counter' as follows:

               if (!data->__internal_use
                    && data->__invocation_counter == 0)
                 /* Emit prolog.  */
                 ...

          This element must never be modified.

    `mbstate_t *__statep'
          The `__statep' element points to an object of type `mbstate_t'
          (*note Keeping the state::).  The conversion of a stateful
          character set must use the object pointed to by `__statep' to
          store information about the conversion state.  The `__statep'
          element itself must never be modified.

    `mbstate_t __state'
          This element must _never_ be used directly.  It is only part
          of this structure to have the needed space allocated.

6.5.4.4 `iconv' module interfaces
.................................

With the knowledge about the data structures we now can describe the
conversion function itself.  To understand the interface a bit of
knowledge is necessary about the functionality in the C library that
loads the objects with the conversions.

   It is often the case that one conversion is used more than once
(i.e., there are several `iconv_open' calls for the same set of
character sets during one program run).  The `mbsrtowcs' et.al.
functions in the GNU C Library also use the `iconv' functionality, which
increases the number of uses of the same functions even more.

   Because of this multiple use of conversions, the modules do not get
loaded exclusively for one conversion.  Instead a module once loaded can
be used by an arbitrary number of `iconv' or `mbsrtowcs' calls at the
same time.  The splitting of the information between conversion-
function-specific information and conversion data makes this possible.
The last section showed the two data structures used to do this.

   This is of course also reflected in the interface and semantics of
the functions that the modules must provide.  There are three functions
that must have the following names:

`gconv_init'
     The `gconv_init' function initializes the conversion function
     specific data structure.  This very same object is shared by all
     conversions that use this conversion and, therefore, no state
     information about the conversion itself must be stored in here.
     If a module implements more than one conversion, the `gconv_init'
     function will be called multiple times.

`gconv_end'
     The `gconv_end' function is responsible for freeing all resources
     allocated by the `gconv_init' function.  If there is nothing to do,
     this function can be missing.  Special care must be taken if the
     module implements more than one conversion and the `gconv_init'
     function does not allocate the same resources for all conversions.

`gconv'
     This is the actual conversion function.  It is called to convert
     one block of text.  It gets passed the conversion step information
     initialized by `gconv_init' and the conversion data, specific to
     this use of the conversion functions.

   There are three data types defined for the three module interface
functions and these define the interface.

 -- Data type: int (*__gconv_init_fct) (struct __gconv_step *)
     This specifies the interface of the initialization function of the
     module.  It is called exactly once for each conversion the module
     implements.

     As explained in the description of the `struct __gconv_step' data
     structure above the initialization function has to initialize
     parts of it.

    `__min_needed_from'
    `__max_needed_from'
    `__min_needed_to'
    `__max_needed_to'
          These elements must be initialized to the exact numbers of
          the minimum and maximum number of bytes used by one character
          in the source and destination character sets, respectively.
          If the characters all have the same size, the minimum and
          maximum values are the same.

    `__stateful'
          This element must be initialized to a nonzero value if the
          source character set is stateful.  Otherwise it must be zero.

     If the initialization function needs to communicate some
     information to the conversion function, this communication can
     happen using the `__data' element of the `__gconv_step' structure.
     But since this data is shared by all the conversions, it must not
     be modified by the conversion function.  The example below shows
     how this can be used.

          #define MIN_NEEDED_FROM         1
          #define MAX_NEEDED_FROM         4
          #define MIN_NEEDED_TO           4
          #define MAX_NEEDED_TO           4

          int
          gconv_init (struct __gconv_step *step)
          {
            /* Determine which direction.  */
            struct iso2022jp_data *new_data;
            enum direction dir = illegal_dir;
            enum variant var = illegal_var;
            int result;

            if (__strcasecmp (step->__from_name, "ISO-2022-JP//") == 0)
              {
                dir = from_iso2022jp;
                var = iso2022jp;
              }
            else if (__strcasecmp (step->__to_name, "ISO-2022-JP//") == 0)
              {
                dir = to_iso2022jp;
                var = iso2022jp;
              }
            else if (__strcasecmp (step->__from_name, "ISO-2022-JP-2//") == 0)
              {
                dir = from_iso2022jp;
                var = iso2022jp2;
              }
            else if (__strcasecmp (step->__to_name, "ISO-2022-JP-2//") == 0)
              {
                dir = to_iso2022jp;
                var = iso2022jp2;
              }

            result = __GCONV_NOCONV;
            if (dir != illegal_dir)
              {
                new_data = (struct iso2022jp_data *)
                  malloc (sizeof (struct iso2022jp_data));

                result = __GCONV_NOMEM;
                if (new_data != NULL)
                  {
                    new_data->dir = dir;
                    new_data->var = var;
                    step->__data = new_data;

                    if (dir == from_iso2022jp)
                      {
                        step->__min_needed_from = MIN_NEEDED_FROM;
                        step->__max_needed_from = MAX_NEEDED_FROM;
                        step->__min_needed_to = MIN_NEEDED_TO;
                        step->__max_needed_to = MAX_NEEDED_TO;
                      }
                    else
                      {
                        step->__min_needed_from = MIN_NEEDED_TO;
                        step->__max_needed_from = MAX_NEEDED_TO;
                        step->__min_needed_to = MIN_NEEDED_FROM;
                        step->__max_needed_to = MAX_NEEDED_FROM + 2;
                      }

                    /* Yes, this is a stateful encoding.  */
                    step->__stateful = 1;

                    result = __GCONV_OK;
                  }
              }

            return result;
          }

     The function first checks which conversion is wanted.  The module
     from which this function is taken implements four different
     conversions; which one is selected can be determined by comparing
     the names.  The comparison should always be done without paying
     attention to the case.

     Next, a data structure, which contains the necessary information
     about which conversion is selected, is allocated.  The data
     structure `struct iso2022jp_data' is locally defined since,
     outside the module, this data is not used at all.  Please note
     that if all four conversions this module supports are requested
     there are four data blocks.

     One interesting thing is the initialization of the `__min_' and
     `__max_' elements of the step data object.  A single ISO-2022-JP
     character can consist of one to four bytes.  Therefore the
     `MIN_NEEDED_FROM' and `MAX_NEEDED_FROM' macros are defined this
     way.  The output is always the `INTERNAL' character set (aka
     UCS-4) and therefore each character consists of exactly four
     bytes.  For the conversion from `INTERNAL' to ISO-2022-JP we have
     to take into account that escape sequences might be necessary to
     switch the character sets.  Therefore the `__max_needed_to'
     element for this direction gets assigned `MAX_NEEDED_FROM + 2'.
     This takes into account the two bytes needed for the escape
     sequences to signal the switching.  The asymmetry in the maximum
     values for the two directions can be explained easily: when
     reading ISO-2022-JP text, escape sequences can be handled alone
     (i.e., it is not necessary to process a real character since the
     effect of the escape sequence can be recorded in the state
     information).  The situation is different for the other direction.
     Since it is in general not known which character comes next, one
     cannot emit escape sequences to change the state in advance.  This
     means the escape sequences have to be emitted together with the
     next character.  Therefore one needs more room than only for the
     character itself.

     The possible return values of the initialization function are:

    `__GCONV_OK'
          The initialization succeeded

    `__GCONV_NOCONV'
          The requested conversion is not supported in the module.
          This can happen if the `gconv-modules' file has errors.

    `__GCONV_NOMEM'
          Memory required to store additional information could not be
          allocated.

   The function called before the module is unloaded is significantly
easier.  It often has nothing at all to do; in which case it can be left
out completely.

 -- Data type: void (*__gconv_end_fct) (struct gconv_step *)
     The task of this function is to free all resources allocated in the
     initialization function.  Therefore only the `__data' element of
     the object pointed to by the argument is of interest.  Continuing
     the example from the initialization function, the finalization
     function looks like this:

          void
          gconv_end (struct __gconv_step *data)
          {
            free (data->__data);
          }

   The most important function is the conversion function itself, which
can get quite complicated for complex character sets.  But since this
is not of interest here, we will only describe a possible skeleton for
the conversion function.

 -- Data type: int (*__gconv_fct) (struct __gconv_step *, struct
          __gconv_step_data *, const char **, const char *, size_t *,
          int)
     The conversion function can be called for two basic reasons: to
     convert text or to reset the state.  From the description of the
     `iconv' function it can be seen why the flushing mode is
     necessary.  What mode is selected is determined by the sixth
     argument, an integer.  This argument being nonzero means that
     flushing is selected.

     Common to both modes is where the output buffer can be found.  The
     information about this buffer is stored in the conversion step
     data.  A pointer to this information is passed as the second
     argument to this function.  The description of the `struct
     __gconv_step_data' structure has more information on the
     conversion step data.

     What has to be done for flushing depends on the source character
     set.  If the source character set is not stateful, nothing has to
     be done.  Otherwise the function has to emit a byte sequence to
     bring the state object into the initial state.  Once this all
     happened the other conversion modules in the chain of conversions
     have to get the same chance.  Whether another step follows can be
     determined from the `__is_last' element of the step data structure
     to which the first parameter points.

     The more interesting mode is when actual text has to be converted.
     The first step in this case is to convert as much text as
     possible from the input buffer and store the result in the output
     buffer.  The start of the input buffer is determined by the third
     argument, which is a pointer to a pointer variable referencing the
     beginning of the buffer.  The fourth argument is a pointer to the
     byte right after the last byte in the buffer.

     The conversion has to be performed according to the current state
     if the character set is stateful.  The state is stored in an
     object pointed to by the `__statep' element of the step data
     (second argument).  Once either the input buffer is empty or the
     output buffer is full the conversion stops.  At this point, the
     pointer variable referenced by the third parameter must point to
     the byte following the last processed byte (i.e., if all of the
     input is consumed, this pointer and the fourth parameter have the
     same value).

     What now happens depends on whether this step is the last one.  If
     it is the last step, the only thing that has to be done is to
     update the `__outbuf' element of the step data structure to point
     after the last written byte.  This update gives the caller the
     information on how much text is available in the output buffer.
     In addition, the variable pointed to by the fifth parameter, which
     is of type `size_t', must be incremented by the number of
     characters (_not bytes_) that were converted in a non-reversible
     way.  Then, the function can return.

     In case the step is not the last one, the later conversion
     functions have to get a chance to do their work.  Therefore, the
     appropriate conversion function has to be called.  The information
     about the functions is stored in the conversion data structures,
     passed as the first parameter.  This information and the step data
     are stored in arrays, so the next element in both cases can be
     found by simple pointer arithmetic:

          int
          gconv (struct __gconv_step *step, struct __gconv_step_data *data,
                 const char **inbuf, const char *inbufend, size_t *written,
                 int do_flush)
          {
            struct __gconv_step *next_step = step + 1;
            struct __gconv_step_data *next_data = data + 1;
            ...

     The `next_step' pointer references the next step information and
     `next_data' the next data record.  The call of the next function
     therefore will look similar to this:

            next_step->__fct (next_step, next_data, &outerr, outbuf,
                              written, 0)

     But this is not yet all.  Once the function call returns the
     conversion function might have some more to do.  If the return
     value of the function is `__GCONV_EMPTY_INPUT', more room is
     available in the output buffer.  Unless the input buffer is empty,
     the conversion functions start all over again and process the rest
     of the input buffer.  If the return value is not
     `__GCONV_EMPTY_INPUT', something went wrong and we have to recover
     from this.

     A requirement for the conversion function is that the input buffer
     pointer (the third argument) always point to the last character
     that was put in converted form into the output buffer.  This is
     trivially true after the conversion performed in the current step,
     but if the conversion functions deeper downstream stop
     prematurely, not all characters from the output buffer are
     consumed and, therefore, the input buffer pointers must be backed
     off to the right position.

     Correcting the input buffers is easy to do if the input and output
     character sets have a fixed width for all characters.  In this
     situation we can compute how many characters are left in the
     output buffer and, therefore, can correct the input buffer pointer
     appropriately with a similar computation.  Things are getting
     tricky if either character set has characters represented with
     variable length byte sequences, and it gets even more complicated
     if the conversion has to take care of the state.  In these cases
     the conversion has to be performed once again, from the known
     state before the initial conversion (i.e., if necessary the state
     of the conversion has to be reset and the conversion loop has to be
     executed again).  The difference now is that it is known how much
     input must be created, and the conversion can stop before
     converting the first unused character.  Once this is done the
     input buffer pointers must be updated again and the function can
     return.

     One final thing should be mentioned.  If it is necessary for the
     conversion to know whether it is the first invocation (in case a
     prolog has to be emitted), the conversion function should
     increment the `__invocation_counter' element of the step data
     structure just before returning to the caller.  See the
     description of the `struct __gconv_step_data' structure above for
     more information on how this can be used.

     The return value must be one of the following values:

    `__GCONV_EMPTY_INPUT'
          All input was consumed and there is room left in the output
          buffer.

    `__GCONV_FULL_OUTPUT'
          No more room in the output buffer.  In case this is not the
          last step this value is propagated down from the call of the
          next conversion function in the chain.

    `__GCONV_INCOMPLETE_INPUT'
          The input buffer is not entirely empty since it contains an
          incomplete character sequence.

     The following example provides a framework for a conversion
     function.  In case a new conversion has to be written the holes in
     this implementation have to be filled and that is it.

          int
          gconv (struct __gconv_step *step, struct __gconv_step_data *data,
                 const char **inbuf, const char *inbufend, size_t *written,
                 int do_flush)
          {
            struct __gconv_step *next_step = step + 1;
            struct __gconv_step_data *next_data = data + 1;
            gconv_fct fct = next_step->__fct;
            int status;

            /* If the function is called with no input this means we have
               to reset to the initial state.  The possibly partly
               converted input is dropped.  */
            if (do_flush)
              {
                status = __GCONV_OK;

                /* Possible emit a byte sequence which put the state object
                   into the initial state.  */

                /* Call the steps down the chain if there are any but only
                   if we successfully emitted the escape sequence.  */
                if (status == __GCONV_OK && ! data->__is_last)
                  status = fct (next_step, next_data, NULL, NULL,
                                written, 1);
              }
            else
              {
                /* We preserve the initial values of the pointer variables.  */
                const char *inptr = *inbuf;
                char *outbuf = data->__outbuf;
                char *outend = data->__outbufend;
                char *outptr;

                do
                  {
                    /* Remember the start value for this round.  */
                    inptr = *inbuf;
                    /* The outbuf buffer is empty.  */
                    outptr = outbuf;

                    /* For stateful encodings the state must be safe here.  */

                    /* Run the conversion loop.  `status' is set
                       appropriately afterwards.  */

                    /* If this is the last step, leave the loop.  There is
                       nothing we can do.  */
                    if (data->__is_last)
                      {
                        /* Store information about how many bytes are
                           available.  */
                        data->__outbuf = outbuf;

                       /* If any non-reversible conversions were performed,
                          add the number to `*written'.  */

                       break;
                     }

                    /* Write out all output that was produced.  */
                    if (outbuf > outptr)
                      {
                        const char *outerr = data->__outbuf;
                        int result;

                        result = fct (next_step, next_data, &outerr,
                                      outbuf, written, 0);

                        if (result != __GCONV_EMPTY_INPUT)
                          {
                            if (outerr != outbuf)
                              {
                                /* Reset the input buffer pointer.  We
                                   document here the complex case.  */
                                size_t nstatus;

                                /* Reload the pointers.  */
                                *inbuf = inptr;
                                outbuf = outptr;

                                /* Possibly reset the state.  */

                                /* Redo the conversion, but this time
                                   the end of the output buffer is at
                                   `outerr'.  */
                              }

                            /* Change the status.  */
                            status = result;
                          }
                        else
                          /* All the output is consumed, we can make
                              another run if everything was ok.  */
                          if (status == __GCONV_FULL_OUTPUT)
                            status = __GCONV_OK;
                     }
                  }
                while (status == __GCONV_OK);

                /* We finished one use of this step.  */
                ++data->__invocation_counter;
              }

            return status;
          }

   This information should be sufficient to write new modules.  Anybody
doing so should also take a look at the available source code in the
GNU C Library sources.  It contains many examples of working and
optimized modules.


File: libc.info,  Node: Locales,  Next: Message Translation,  Prev: Character Set Handling,  Up: Top

7 Locales and Internationalization
**********************************

Different countries and cultures have varying conventions for how to
communicate.  These conventions range from very simple ones, such as the
format for representing dates and times, to very complex ones, such as
the language spoken.

   "Internationalization" of software means programming it to be able
to adapt to the user's favorite conventions.  In ISO C,
internationalization works by means of "locales".  Each locale
specifies a collection of conventions, one convention for each purpose.
The user chooses a set of conventions by specifying a locale (via
environment variables).

   All programs inherit the chosen locale as part of their environment.
Provided the programs are written to obey the choice of locale, they
will follow the conventions preferred by the user.

* Menu:

* Effects of Locale::           Actions affected by the choice of
                                 locale.
* Choosing Locale::             How the user specifies a locale.
* Locale Categories::           Different purposes for which you can
                                 select a locale.
* Setting the Locale::          How a program specifies the locale
                                 with library functions.
* Standard Locales::            Locale names available on all systems.
* Locale Names::                Format of system-specific locale names.
* Locale Information::          How to access the information for the locale.
* Formatting Numbers::          A dedicated function to format numbers.
* Yes-or-No Questions::         Check a Response against the locale.


File: libc.info,  Node: Effects of Locale,  Next: Choosing Locale,  Up: Locales

7.1 What Effects a Locale Has
=============================

Each locale specifies conventions for several purposes, including the
following:

   * What multibyte character sequences are valid, and how they are
     interpreted (*note Character Set Handling::).

   * Classification of which characters in the local character set are
     considered alphabetic, and upper- and lower-case conversion
     conventions (*note Character Handling::).

   * The collating sequence for the local language and character set
     (*note Collation Functions::).

   * Formatting of numbers and currency amounts (*note General
     Numeric::).

   * Formatting of dates and times (*note Formatting Calendar Time::).

   * What language to use for output, including error messages (*note
     Message Translation::).

   * What language to use for user answers to yes-or-no questions
     (*note Yes-or-No Questions::).

   * What language to use for more complex user input.  (The C library
     doesn't yet help you implement this.)

   Some aspects of adapting to the specified locale are handled
automatically by the library subroutines.  For example, all your program
needs to do in order to use the collating sequence of the chosen locale
is to use `strcoll' or `strxfrm' to compare strings.

   Other aspects of locales are beyond the comprehension of the library.
For example, the library can't automatically translate your program's
output messages into other languages.  The only way you can support
output in the user's favorite language is to program this more or less
by hand.  The C library provides functions to handle translations for
multiple languages easily.

   This chapter discusses the mechanism by which you can modify the
current locale.  The effects of the current locale on specific library
functions are discussed in more detail in the descriptions of those
functions.


File: libc.info,  Node: Choosing Locale,  Next: Locale Categories,  Prev: Effects of Locale,  Up: Locales

7.2 Choosing a Locale
=====================

The simplest way for the user to choose a locale is to set the
environment variable `LANG'.  This specifies a single locale to use for
all purposes.  For example, a user could specify a hypothetical locale
named `espana-castellano' to use the standard conventions of most of
Spain.

   The set of locales supported depends on the operating system you are
using, and so do their names, except that the standard locale called
`C' or `POSIX' always exist.  *Note Locale Names::.

   In order to force the system to always use the default locale, the
user can set the `LC_ALL' environment variable to `C'.

   A user also has the option of specifying different locales for
different purposes--in effect, choosing a mixture of multiple locales.
*Note Locale Categories::.

   For example, the user might specify the locale `espana-castellano'
for most purposes, but specify the locale `usa-english' for currency
formatting.  This might make sense if the user is a Spanish-speaking
American, working in Spanish, but representing monetary amounts in US
dollars.

   Note that both locales `espana-castellano' and `usa-english', like
all locales, would include conventions for all of the purposes to which
locales apply.  However, the user can choose to use each locale for a
particular subset of those purposes.


File: libc.info,  Node: Locale Categories,  Next: Setting the Locale,  Prev: Choosing Locale,  Up: Locales

7.3 Locale Categories
=====================

The purposes that locales serve are grouped into "categories", so that
a user or a program can choose the locale for each category
independently.  Here is a table of categories; each name is both an
environment variable that a user can set, and a macro name that you can
use as the first argument to `setlocale'.

   The contents of the environment variable (or the string in the second
argument to `setlocale') has to be a valid locale name.  *Note Locale
Names::.

`LC_COLLATE'
     This category applies to collation of strings (functions `strcoll'
     and `strxfrm'); see *Note Collation Functions::.

`LC_CTYPE'
     This category applies to classification and conversion of
     characters, and to multibyte and wide characters; see *Note
     Character Handling::, and *Note Character Set Handling::.

`LC_MONETARY'
     This category applies to formatting monetary values; see *Note
     General Numeric::.

`LC_NUMERIC'
     This category applies to formatting numeric values that are not
     monetary; see *Note General Numeric::.

`LC_TIME'
     This category applies to formatting date and time values; see
     *Note Formatting Calendar Time::.

`LC_MESSAGES'
     This category applies to selecting the language used in the user
     interface for message translation (*note The Uniforum approach::;
     *note Message catalogs a la X/Open::)  and contains regular
     expressions for affirmative and negative responses.

`LC_ALL'
     This is not a category; it is only a macro that you can use with
     `setlocale' to set a single locale for all purposes.  Setting this
     environment variable overwrites all selections by the other `LC_*'
     variables or `LANG'.

`LANG'
     If this environment variable is defined, its value specifies the
     locale to use for all purposes except as overridden by the
     variables above.

   When developing the message translation functions it was felt that
the functionality provided by the variables above is not sufficient.
For example, it should be possible to specify more than one locale name.
Take a Swedish user who better speaks German than English, and a program
whose messages are output in English by default.  It should be possible
to specify that the first choice of language is Swedish, the second
German, and if this also fails to use English.  This is possible with
the variable `LANGUAGE'.  For further description of this GNU extension
see *Note Using gettextized software::.


File: libc.info,  Node: Setting the Locale,  Next: Standard Locales,  Prev: Locale Categories,  Up: Locales

7.4 How Programs Set the Locale
===============================

A C program inherits its locale environment variables when it starts up.
This happens automatically.  However, these variables do not
automatically control the locale used by the library functions, because
ISO C says that all programs start by default in the standard `C'
locale.  To use the locales specified by the environment, you must call
`setlocale'.  Call it as follows:

     setlocale (LC_ALL, "");

to select a locale based on the user choice of the appropriate
environment variables.

   You can also use `setlocale' to specify a particular locale, for
general use or for a specific category.

   The symbols in this section are defined in the header file
`locale.h'.

 -- Function: char * setlocale (int CATEGORY, const char *LOCALE)
     Preliminary: | MT-Unsafe const:locale env | AS-Unsafe init lock
     heap corrupt | AC-Unsafe init corrupt lock mem fd | *Note POSIX
     Safety Concepts::.

     The function `setlocale' sets the current locale for category
     CATEGORY to LOCALE.

     If CATEGORY is `LC_ALL', this specifies the locale for all
     purposes.  The other possible values of CATEGORY specify a single
     purpose (*note Locale Categories::).

     You can also use this function to find out the current locale by
     passing a null pointer as the LOCALE argument.  In this case,
     `setlocale' returns a string that is the name of the locale
     currently selected for category CATEGORY.

     The string returned by `setlocale' can be overwritten by subsequent
     calls, so you should make a copy of the string (*note Copying
     Strings and Arrays::) if you want to save it past any further
     calls to `setlocale'.  (The standard library is guaranteed never
     to call `setlocale' itself.)

     You should not modify the string returned by `setlocale'.  It might
     be the same string that was passed as an argument in a previous
     call to `setlocale'.  One requirement is that the CATEGORY must be
     the same in the call the string was returned and the one when the
     string is passed in as LOCALE parameter.

     When you read the current locale for category `LC_ALL', the value
     encodes the entire combination of selected locales for all
     categories.  If you specify the same "locale name" with `LC_ALL'
     in a subsequent call to `setlocale', it restores the same
     combination of locale selections.

     To be sure you can use the returned string encoding the currently
     selected locale at a later time, you must make a copy of the
     string.  It is not guaranteed that the returned pointer remains
     valid over time.

     When the LOCALE argument is not a null pointer, the string returned
     by `setlocale' reflects the newly-modified locale.

     If you specify an empty string for LOCALE, this means to read the
     appropriate environment variable and use its value to select the
     locale for CATEGORY.

     If a nonempty string is given for LOCALE, then the locale of that
     name is used if possible.

     The effective locale name (either the second argument to
     `setlocale', or if the argument is an empty string, the name
     obtained from the process environment) must be a valid locale name.
     *Note Locale Names::.

     If you specify an invalid locale name, `setlocale' returns a null
     pointer and leaves the current locale unchanged.

   Here is an example showing how you might use `setlocale' to
temporarily switch to a new locale.

     #include <stddef.h>
     #include <locale.h>
     #include <stdlib.h>
     #include <string.h>

     void
     with_other_locale (char *new_locale,
                        void (*subroutine) (int),
                        int argument)
     {
       char *old_locale, *saved_locale;

       /* Get the name of the current locale.  */
       old_locale = setlocale (LC_ALL, NULL);

       /* Copy the name so it won't be clobbered by `setlocale'. */
       saved_locale = strdup (old_locale);
       if (saved_locale == NULL)
         fatal ("Out of memory");

       /* Now change the locale and do some stuff with it. */
       setlocale (LC_ALL, new_locale);
       (*subroutine) (argument);

       /* Restore the original locale. */
       setlocale (LC_ALL, saved_locale);
       free (saved_locale);
     }

   *Portability Note:* Some ISO C systems may define additional locale
categories, and future versions of the library will do so.  For
portability, assume that any symbol beginning with `LC_' might be
defined in `locale.h'.


File: libc.info,  Node: Standard Locales,  Next: Locale Names,  Prev: Setting the Locale,  Up: Locales

7.5 Standard Locales
====================

The only locale names you can count on finding on all operating systems
are these three standard ones:

`"C"'
     This is the standard C locale.  The attributes and behavior it
     provides are specified in the ISO C standard.  When your program
     starts up, it initially uses this locale by default.

`"POSIX"'
     This is the standard POSIX locale.  Currently, it is an alias for
     the standard C locale.

`""'
     The empty name says to select a locale based on environment
     variables.  *Note Locale Categories::.

   Defining and installing named locales is normally a responsibility of
the system administrator at your site (or the person who installed the
GNU C Library).  It is also possible for the user to create private
locales.  All this will be discussed later when describing the tool to
do so.

   If your program needs to use something other than the `C' locale, it
will be more portable if you use whatever locale the user specifies
with the environment, rather than trying to specify some non-standard
locale explicitly by name.  Remember, different machines might have
different sets of locales installed.


File: libc.info,  Node: Locale Names,  Next: Locale Information,  Prev: Standard Locales,  Up: Locales

7.6 Locale Names
================

The following command prints a list of locales supported by the system:

       locale -a

   *Portability Note:* With the notable exception of the standard
locale names `C' and `POSIX', locale names are system-specific.

   Most locale names follow XPG syntax and consist of up to four parts:

     LANGUAGE[_TERRITORY[.CODESET]][@MODIFIER]

   Beside the first part, all of them are allowed to be missing.  If the
full specified locale is not found, less specific ones are looked for.
The various parts will be stripped off, in the following order:

  1. codeset

  2. normalized codeset

  3. territory

  4. modifier

   For example, the locale name `de_AT.iso885915@euro' denotes a
German-language locale for use in Austria, using the ISO-8859-15
(Latin-9) character set, and with the Euro as the currency symbol.

   In addition to locale names which follow XPG syntax, systems may
provide aliases such as `german'.  Both categories of names must not
contain the slash character `/'.

   If the locale name starts with a slash `/', it is treated as a path
relative to the configured locale directories; see `LOCPATH' below.
The specified path must not contain a component `..', or the name is
invalid, and `setlocale' will fail.

   *Portability Note:* POSIX suggests that if a locale name starts with
a slash `/', it is resolved as an absolute path.  However, the GNU C
Library treats it as a relative path under the directories listed in
`LOCPATH' (or the default locale directory if `LOCPATH' is unset).

   Locale names which are longer than an implementation-defined limit
are invalid and cause `setlocale' to fail.

   As a special case, locale names used with `LC_ALL' can combine
several locales, reflecting different locale settings for different
categories.  For example, you might want to use a U.S. locale with ISO
A4 paper format, so you set `LANG' to `en_US.UTF-8', and `LC_PAPER' to
`de_DE.UTF-8'.  In this case, the `LC_ALL'-style combined locale name is

     LC_CTYPE=en_US.UTF-8;LC_TIME=en_US.UTF-8;LC_PAPER=de_DE.UTF-8;...

   followed by other category settings not shown here.

   The path used for finding locale data can be set using the `LOCPATH'
environment variable.  This variable lists the directories in which to
search for locale definitions, separated by a colon `:'.

   The default path for finding locale data is system specific.  A
typical value for the `LOCPATH' default is:

     /usr/share/locale

   The value of `LOCPATH' is ignored by privileged programs for
security reasons, and only the default directory is used.