446ba0b5f8
support u-boot-spl [feat](PQbin) add config json param option [panel] add st7785m config in uboot adjust opensbi mem from 512KB to 256KB. [sensor]add sensor byd_bf2253l [sensor]add sensor sc1336_1l [sensor]add sensor gc2083 [build] add cv1813h_wevb_0007a_emmc build config delete property of ion node, ion size can be freely set by env [board] sync huashanpi emmc board configurations to nand and nor Change-Id: I705a04fd2f60b4cbe9919196770a396d72c1dcee
59 lines
2.5 KiB
Makefile
59 lines
2.5 KiB
Makefile
opensbi: export CROSS_COMPILE=$(CONFIG_CROSS_COMPILE_SDK)
|
|
opensbi: u-boot-build
|
|
$(call print_target)
|
|
${Q}$(MAKE) -j${NPROC} -C ${OPENSBI_PATH} PLATFORM=generic \
|
|
FW_PAYLOAD_PATH=${UBOOT_PATH}/${UBOOT_OUTPUT_FOLDER}/u-boot-raw.bin \
|
|
FW_FDT_PATH=${UBOOT_PATH}/${UBOOT_OUTPUT_FOLDER}/arch/riscv/dts/${CHIP}_${BOARD}.dtb
|
|
|
|
opensbi-clean:
|
|
$(call print_target)
|
|
${Q}$(MAKE) -C ${OPENSBI_PATH} PLATFORM=generic distclean
|
|
|
|
FSBL_OUTPUT_PATH = ${FSBL_PATH}/build/${PROJECT_FULLNAME}
|
|
ifeq ($(call qstrip,${CONFIG_ARCH}),riscv)
|
|
fsbl-build: opensbi
|
|
endif
|
|
ifeq (${CONFIG_ENABLE_FREERTOS},y)
|
|
fsbl-build: rtos
|
|
fsbl%: export BLCP_2ND_PATH=${FREERTOS_PATH}/cvitek/install/bin/cvirtos.bin
|
|
fsbl%: export RTOS_DUMP_PRINT_ENABLE=$(CONFIG_ENABLE_RTOS_DUMP_PRINT)
|
|
fsbl%: export RTOS_DUMP_PRINT_SZ_IDX=$(CONFIG_DUMP_PRINT_SZ_IDX)
|
|
fsbl%: export RTOS_FAST_IMAGE_TYPE=${CONFIG_FAST_IMAGE_TYPE}
|
|
fsbl%: export RTOS_ENABLE_FREERTOS=${CONFIG_ENABLE_FREERTOS}
|
|
endif
|
|
fsbl%: export FSBL_SECURE_BOOT_SUPPORT=${CONFIG_FSBL_SECURE_BOOT_SUPPORT}
|
|
fsbl%: export ARCH=$(call qstrip,${CONFIG_ARCH})
|
|
fsbl%: export OD_CLK_SEL=${CONFIG_OD_CLK_SEL}
|
|
fsbl%: export VC_CLK_OVERDRIVE=${CONFIG_VC_CLK_OVERDRIVE}
|
|
fsbl-build: u-boot-build memory-map
|
|
$(call print_target)
|
|
${Q}mkdir -p ${FSBL_PATH}/build
|
|
${Q}ln -snrf -t ${FSBL_PATH}/build ${CVI_BOARD_MEMMAP_H_PATH}
|
|
${Q}$(MAKE) -j${NPROC} -C ${FSBL_PATH} O=${FSBL_OUTPUT_PATH} BLCP_2ND_PATH=${BLCP_2ND_PATH} \
|
|
LOADER_2ND_PATH=${UBOOT_PATH}/${UBOOT_OUTPUT_FOLDER}/u-boot-raw.bin
|
|
${Q}cp ${FSBL_OUTPUT_PATH}/fip.bin ${OUTPUT_DIR}/
|
|
ifeq (${CONFIG_UBOOT_SPL_CUSTOM},y)
|
|
${Q}$(MAKE) -C ${FSBL_PATH} clean O=${FSBL_OUTPUT_PATH}
|
|
${Q}$(MAKE) -j${NPROC} -C ${FSBL_PATH} O=${FSBL_OUTPUT_PATH} BLCP_2ND_PATH=${BLCP_2ND_PATH} \
|
|
CONFIG_SKIP_UBOOT=$(CONFIG_SKIP_UBOOT) LOADER_2ND_PATH=${UBOOT_PATH}/${UBOOT_OUTPUT_FOLDER}/spl/u-boot-spl-raw.bin
|
|
${Q}cp ${FSBL_OUTPUT_PATH}/fip.bin ${OUTPUT_DIR}/fip_spl.bin
|
|
else
|
|
${Q}cp ${FSBL_OUTPUT_PATH}/fip.bin ${OUTPUT_DIR}/fip_spl.bin
|
|
endif
|
|
|
|
fsbl-clean: rtos-clean
|
|
$(call print_target)
|
|
${Q}$(MAKE) -C ${FSBL_PATH} clean O=${FSBL_OUTPUT_PATH}
|
|
|
|
u-boot-dep: fsbl-build ${OUTPUT_DIR}/elf
|
|
$(call print_target)
|
|
ifeq ($(call qstrip,${CONFIG_ARCH}),riscv)
|
|
${Q}cp ${OPENSBI_PATH}/build/platform/generic/firmware/fw_payload.bin ${OUTPUT_DIR}/fw_payload_uboot.bin
|
|
${Q}cp ${OPENSBI_PATH}/build/platform/generic/firmware/fw_payload.elf ${OUTPUT_DIR}/elf/fw_payload_uboot.elf
|
|
endif
|
|
|
|
ifeq ($(call qstrip,${CONFIG_ARCH}),riscv)
|
|
u-boot-clean: opensbi-clean
|
|
endif
|
|
u-boot-clean: fsbl-clean
|