[Setup]
Make sure libusb is installed.
On Linux, type "sudo apt-get install libusb-1.0-0-dev".
On Windows, in step3 of the test flow, use zadig to install the winUSB (libusb).
[Test Flow]
* Follow below steps to do the Cvitek USB Gadget Test.
1. Boot into kernel. Connect the USB cable to PC and cv1835.
2. Type "/etc/uhubon.sh device" to setup the USB device.
3. Type "/etc/run_usb.sh probe cvg" and "/etc/run_usb.sh start".
4. Type "mdev -s" and make sure "/dev/cvi_gadget" exist.
5. Type "/usr/bin/sample_cvg [test case]" to run the test application.
[test case]: 0 blocking read/write, use mmap as data buffer
1 blocking read/write, use copy from user.
2 streaming read/write, use mmap as data buffer.
3 streaming read/write, use copy from user.
4 blind test. Do TX and RX concurrently.
5 blocking read/write, use ion data buffer.
6 streaming read/write, use ion data buffer.
6. On host PC, type "gen_patterns.sh" to generate test patterns.
7. To run test case except for [4] blind test, run "sudo python cv1835_cvg.py" on PC.
Check the test result.
8. To run test case [4] blind test, run "sudo python cv1835_cvg_blind.py" on PC.
Check the test result.
9. Type "Ctrl-C" to leave the test application on cv1835. Type "/etc/run_usb.sh stop"
to disconnect the usb connection.
10.Jump to step 3 for another test case.
