f8fc109960
repo: https://github.com/u-boot/u-boot commit: d80bb749fab53da72c4a0e09b8c2d2aaa3103c91 Change-Id: Ie6434426e1ec15bc08bb1832798e371f3fd5fb29
31 lines
1.3 KiB
ReStructuredText
31 lines
1.3 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
.. sectionauthor:: Bin Meng <bmeng.cn@gmail.com>
|
|
|
|
Cherry Hill CRB
|
|
===============
|
|
|
|
This uses Intel FSP for Braswell platform. Download it from Intel FSP website,
|
|
put the .fd file to the board directory and rename it to fsp.bin.
|
|
|
|
Extract descriptor.bin and me.bin from the original BIOS on the board using
|
|
ifdtool and put them to the board directory as well.
|
|
|
|
Note the FSP package for Braswell does not ship a traditional legacy VGA BIOS
|
|
image for the integrated graphics device. Instead a new binary called Video
|
|
BIOS Table (VBT) is shipped. Put it to the board directory and rename it to
|
|
vbt.bin if you want graphics support in U-Boot.
|
|
|
|
Now you can build U-Boot and obtain u-boot.rom::
|
|
|
|
$ make cherryhill_defconfig
|
|
$ make all
|
|
|
|
An important note for programming u-boot.rom to the on-board SPI flash is that
|
|
you need make sure the SPI flash's 'quad enable' bit in its status register
|
|
matches the settings in the descriptor.bin, otherwise the board won't boot.
|
|
|
|
For the on-board SPI flash MX25U6435F, this can be done by writing 0x40 to the
|
|
status register by DediProg in: Config > Modify Status Register > Write Status
|
|
Register(s) > Register1 Value(Hex). This is is a one-time change. Once set, it
|
|
persists in SPI flash part regardless of the u-boot.rom image burned.
|