Demo/NxpNfcRdLib
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
Develop_Raspi4B+PN5180
NxpNfcRdLib/Examples/NfcrdlibEx6_LPCD/Readme.txt
yegaogang 042721aab5 [Add] First commit
2024-07-08 21:03:06 +08:00

242 lines
8.3 KiB
Plaintext
Raw Permalink Blame History

__________________________________________________
NXPNFCRDLIB EXAMPLE : NFCRDLIBEX6_LPCD
(V07.10.00)
__________________________________________________
Table of Contents
_________________
1 Document Purpose
2 Description of the NfcrdlibEx6_LPCD
3 Restrictions on NfcrdlibEx6_LPCD
4 Configurations of NfcrdlibEx6_LPCD
5 Package Contents
6 Mandatory materials (not included)
7 Hardware Configuration
8 Software Configuration
9 Steps to build NfcrdlibEx6_LPCD for LPC1769 with PN5190 using MCUXpresso
10 Steps to build NfcrdlibEx6_LPCD for LPC1769 with PN5180 using MCUXpresso
11 Steps to build NfcrdlibEx6_LPCD for LPC1769 with RC663 using MCUXpresso
12 Steps to build NfcrdlibEx6_LPCD for PN7462AU using MCUXpresso
13 Steps to build NfcrdlibEx6_LPCD for FRDM-K82F using MCUXpresso
14 Selection of Board / OSAL / Frontend (MCUXpresso)
15 Running NfcrdlibEx6_LPCD
16 List of supported NFC Reader Boards/ICs
17 Reference Documents
1 Document Purpose
==================
This document describes the steps to be followed to execute
NfcrdlibEx6_LPCD example as well as it's known problems and
restrictions.
2 Description of the NfcrdlibEx6_LPCD
=====================================
- NfcrdlibEx6_LPCD can be run with CLEV663B, PN5180, PN5190 and
PN7462AU. (See Section-16 for supported versions)
- This example performs the LPCD Demonstartion of all the different
LPCD Options available with different NXP Reader IC's.
- LPCD Calibration and LPCD Card Detection Loops are separated to
shown the LPCD Capabilities of different NXP Reader IC's.
3 Restrictions on NfcrdlibEx6_LPCD
==================================
- NfcrdlibEx6_LPCD is restricted to be run on NFC Reader Boards/ICs
mentioned in Section-16.
- The APIs are intended for NXP contact-less reader ICs only, as such
the APIs are not to be ported to any technology from any other
vendor.
- NXP will not support porting to any other vendor platform.
- This software project requires NxpNfcRdLib v07.10.00 or later.
- **IMPORTANT** The default used MCU Type is K82. When executing
example on LPC1769 or PN7462AU, the MCU Type has to be changed in
the MCUXpresso IDE.
- For switching to MCU Type to PN7462AU, see Section-12
- For switching to MCU Type to LPC1769, see Section-9, Section-10 and
Section-11.
4 Configurations of NfcrdlibEx6_LPCD
====================================
- The example application is written to demonstrate LPCD functionality
of all NXP Reader IC's.
5 Package Contents
==================
- Readme.txt
+ This readme file
- NfcrdlibEx6_LPCD.c
+ Main example file.
- intfs/NfcrdlibEx6_LPCD.h
+ Interfaces/Defines specific to the example
- intfs/ph_NxpBuild_App.h
+ Reader library build configuration file
- src/phApp_Helper.c
- src/NfcrdlibEx6_Pn5180_LPCD_Demo.c
- src/NfcrdlibEx6_Pn5190_LPCD_Demo.c
- src/NfcrdlibEx6_Pn7462AU_LPCD_Demo.c
- src/NfcrdlibEx6_Rc663_LPCD_Demo.c
- src/phApp_Init.c and intfs/phApp_Init.h
+ Common utility functions (common across all examples)
- mcux/.cproject and mcux/.project
+ MCUXpresso project configuration file
- cr_startup_lpc175x_6x.c
+ Startup required to compile example for LPC1769 Micro Controller.
6 Mandatory materials (not included)
====================================
- MCUXpresso IDE. It can be downloaded from
[http://www.nxp.com/products/:MCUXpresso-IDE]
- SDK for Freedom K82 Board
([http://www.nxp.com/products/:FRDM-K82F]). The pre-build SDK can
be downloaded from
[https://mcuxpresso.nxp.com/en/license?hash=9897a8c19a6bc569c3fade7141f0f405&hash_download=true&to_vault=true]
See MCUXpresso User Manual for steps needed to install an SDK.
- Plugin to extend MCUXpresso to support PN7462AU. (Required for
MCUXpresso versions before MCUXpressoIDE_10.0.2)
- LPCXpresso LPC1769 / Freedom K82 development boards For NFC ICs
listed in Section-16 (Note: PN7462AU (Section-16 Bullet-3) does not
need any other other microcontroller).
7 Hardware Configuration
========================
Before starting this application, HW Changes may be required for the
used board. Refer to the following User Manuals / Application notes
before starting with this example.
- AN11211: Quick Start Up Guide RC663 Blueboard
- AN11744: PN5180 Evaluation board quick start guide
- AN11802: NFC Reader Library for Linux Installation Guidelines
- AN12550: PNEV5190B Evaluation board quick start guide
8 Software Configuration
========================
- The Software can be compiled for Cortex M3 LPC1769 micro-controller,
Cortex M4 Freedom K82 and Cortex M0 based PN7462AU from NXP.
- Since this example can be configured to run on various MCU ICs and
various NFC ICs, appropriate changes are required as mentioned in
Section-9, Section-10, Section-11, Section-12 and Section-13.
9 Steps to build NfcrdlibEx6_LPCD for LPC1769 with PN5190 using MCUXpresso
==========================================================================
See "PNEV5190B Evaluation board quick start guide" in AN12550 (See
Section-17, Bullet-6 below)
10 Steps to build NfcrdlibEx6_LPCD for LPC1769 with PN5180 using MCUXpresso
===========================================================================
See "Importing provided SW example projects" in AN11908 (See
Section-17, Bullet-2 below)
11 Steps to build NfcrdlibEx6_LPCD for LPC1769 with RC663 using MCUXpresso
==========================================================================
See "Importing provided SW example projects" in AN11022 (See
Section-17, Bullet-3 below)
12 Steps to build NfcrdlibEx6_LPCD for PN7462AU using MCUXpresso
================================================================
- For MCUXpresso versions before MCUXpressoIDE_10.0.2, See "Adding
PN7462AU Plugin" in UM10883. (See Section-17, Bullet-4 below)
- See "Importing provided SW example projects" in UM10883.
13 Steps to build NfcrdlibEx6_LPCD for FRDM-K82F using MCUXpresso
=================================================================
See "Import projects to the MCUXpresso" in AN11908. (See Section-17,
Bullet-2 below)
14 Selection of Board / OSAL / Frontend (MCUXpresso)
====================================================
For MCUXpresso, the selection of Board / OSAL / Frontend has to be
done via -D (Preprocessor defines).
1) To select the board go to "Project Properties" --> "C/C++ Build"
--> "Settings" --> "Preprocessor" --> "Defined symbols (-D)", and
define the relevant PHDRIVER_<BoardNFCCombination>_BOARD macro.
e.g. For using K82 with Pn5190 use PHDRIVER_K82F_PNEV5190B_BOARD
and for LPC1769 with PN5190 use PHDRIVER_LPC1769PN5190_BOARD. For
list of supported boards refer to
Platform\DAL\cfg\BoardSelection.h.
2) To select the osal/os type, go to "Project Properties" --> "C/C++
Build" --> "Settings" --> "Preprocessor" --> "Defined symbols
(-D)".
e.g. For using FreeRTOS use PH_OSAL_FREERTOS. For other options
refer to RTOS\phOsal\inc\phOsal_Config.h.
15 Running NfcrdlibEx6_LPCD
===========================
The example application is written to demonstrate LPCD functionality
of NXP Reader IC's.
16 List of supported NFC Reader Boards/ICs
==========================================
1) CLEV6630B v2.0 Customer Evaluation Board
2) PNEV5180B v2.0 Customer Evaluation Board
3) PN7462AU v2.1 Customer Evaluation Board
4) PNEV5190B v1.0 Customer Evaluation Board
17 Reference Documents
======================
1) UM10954 : PN5180 SW Quick start guide
[http://www.nxp.com/docs/en/user-guide/UM10954.pdf]
2) AN11908 : NFC Reader Library for FRDM-K82F Board Installation
guidelines
[http://www.nxp.com/docs/en/application-note/AN11908.pdf]
3) AN11022 : CLRC663 Evaluation board quick start guide
[http://www.nxp.com/docs/en/application-note/AN11022.pdf]
4) UM10883 : PN7462AU Quick Start Guide - Development Kit
[http://www.nxp.com/docs/en/user-guide/UM10883.pdf]
5) AN11802 : NFC Reader Library for Linux Installation Guidelines
[http://www.nxp.com/docs/en/application-note/AN11802.pdf]
6) AN12550 : PNEV5190B Evaluation board quick start guide
----------------------------------------------------------------------
For updates of this example, see
[http://www.nxp.com/products/:NFC-READER-LIBRARY]
Reference in New Issue View Git Blame Copy Permalink