88 lines
4.1 KiB
C
88 lines
4.1 KiB
C
/*----------------------------------------------------------------------------*/
|
|
/* Copyright 2017-2021 NXP */
|
|
/* */
|
|
/* NXP Confidential. This software is owned or controlled by NXP and may only */
|
|
/* be used strictly in accordance with the applicable license terms. */
|
|
/* By expressly accepting such terms or by downloading, installing, */
|
|
/* activating and/or otherwise using the software, you are agreeing that you */
|
|
/* have read, and that you agree to comply with and are bound by, such */
|
|
/* license terms. If you do not agree to be bound by the applicable license */
|
|
/* terms, then you may not retain, install, activate or otherwise use the */
|
|
/* software. */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/** \file
|
|
* Generic phDriver Component of Reader Library Framework.
|
|
* $Author$
|
|
* $Revision$
|
|
* $Date$
|
|
*
|
|
*/
|
|
|
|
#ifndef BOARD_PIRC663_H
|
|
#define BOARD_PIRC663_H
|
|
|
|
/*******************************************************************
|
|
* Enable User space SPI.
|
|
******************************************************************/
|
|
#define PHDRIVER_LINUX_USER_SPI /**< User Space Spi. Kernel space is supported for PN5180 only. */
|
|
|
|
/******************************************************************
|
|
* Board Pin/Gpio configurations
|
|
******************************************************************/
|
|
#define PHDRIVER_PIN_RESET 24 /**< "/sys/class/gpio/gpio24/" */
|
|
#define PHDRIVER_PIN_IRQ 23 /**< "/sys/class/gpio/gpio23/" */
|
|
#define PHDRIVER_PIN_IFSEL0 27
|
|
#define PHDRIVER_PIN_IFSEL1 22
|
|
#define PHDRIVER_PIN_AD0 4
|
|
#define PHDRIVER_PIN_AD1 17
|
|
|
|
/******************************************************************
|
|
* PIN Pull-Up/Pull-Down configurations.
|
|
******************************************************************/
|
|
#define PHDRIVER_PIN_RESET_PULL_CFG PH_DRIVER_PULL_DOWN
|
|
#define PHDRIVER_PIN_IRQ_PULL_CFG PH_DRIVER_PULL_UP
|
|
|
|
/******************************************************************
|
|
* IRQ & BUSY PIN TRIGGER settings
|
|
******************************************************************/
|
|
#define PIN_IRQ_TRIGGER_TYPE PH_DRIVER_INTERRUPT_RISINGEDGE
|
|
|
|
/*****************************************************************
|
|
* Front End Reset logic level settings
|
|
****************************************************************/
|
|
#define PH_DRIVER_SET_HIGH 1 /**< Logic High. */
|
|
#define PH_DRIVER_SET_LOW 0 /**< Logic Low. */
|
|
#define RESET_POWERDOWN_LEVEL PH_DRIVER_SET_HIGH
|
|
#define RESET_POWERUP_LEVEL PH_DRIVER_SET_LOW
|
|
|
|
/*****************************************************************
|
|
* SPI Configuration
|
|
****************************************************************/
|
|
#ifdef PHDRIVER_LINUX_USER_SPI
|
|
# define PHDRIVER_USER_SPI_BUS 0 /**< "/dev/spidev0.0" */
|
|
# define PHDRIVER_USER_SPI_CS 0 /**< "/dev/spidev0.0" */
|
|
# define PHDRIVER_USER_SPI_FREQ 5000000 /**< 5 MHz. */
|
|
# define PHDRIVER_USER_SPI_CFG_DIR "/dev/spidev"
|
|
# define PHDRIVER_USER_SPI_CFG_MODE SPI_MODE_0
|
|
# define PHDRIVER_USER_SPI_CFG_BITS_PER_WORD 8
|
|
|
|
/*****************************************************************
|
|
* Dummy entries
|
|
* No functionality. To suppress build error in HAL. No pin functionality in SPI Linux BAL.
|
|
*****************************************************************/
|
|
# define PHDRIVER_PIN_SSEL 0xFFFF
|
|
# define PHDRIVER_PIN_NSS_PULL_CFG PH_DRIVER_PULL_UP
|
|
|
|
#endif
|
|
|
|
/*****************************************************************
|
|
* STATUS LED Configuration
|
|
****************************************************************/
|
|
#define PHDRIVER_LED_SUCCESS_DELAY 2
|
|
|
|
#define PHDRIVER_LED_FAILURE_DELAY_MS 250
|
|
#define PHDRIVER_LED_FAILURE_FLICKER 4
|
|
|
|
#endif /* BOARD_PIRC663_H */
|