This is libc.info, produced by makeinfo version 5.2 from libc.texinfo.

This file documents the GNU C Library.

   This is ‘The GNU C Library Reference Manual’, for version 2.23.

   Copyright © 1993–2016 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being “Free Software Needs Free Documentation” and
“GNU Lesser General Public License”, the Front-Cover texts being “A GNU
Manual”, and with the Back-Cover Texts as in (a) below.  A copy of the
license is included in the section entitled "GNU Free Documentation
License".

   (a) The FSF’s Back-Cover Text is: “You have the freedom to copy and
modify this GNU manual.  Buying copies from the FSF supports it in
developing GNU and promoting software freedom.”
INFO-DIR-SECTION Software libraries
START-INFO-DIR-ENTRY
* Libc: (libc).                 C library.
END-INFO-DIR-ENTRY

INFO-DIR-SECTION GNU C library functions and macros
START-INFO-DIR-ENTRY
* ALTWERASE: (libc)Local Modes.
* ARGP_ERR_UNKNOWN: (libc)Argp Parser Functions.
* ARG_MAX: (libc)General Limits.
* BC_BASE_MAX: (libc)Utility Limits.
* BC_DIM_MAX: (libc)Utility Limits.
* BC_SCALE_MAX: (libc)Utility Limits.
* BC_STRING_MAX: (libc)Utility Limits.
* BRKINT: (libc)Input Modes.
* BUFSIZ: (libc)Controlling Buffering.
* CCTS_OFLOW: (libc)Control Modes.
* CHILD_MAX: (libc)General Limits.
* CIGNORE: (libc)Control Modes.
* CLK_TCK: (libc)Processor Time.
* CLOCAL: (libc)Control Modes.
* CLOCKS_PER_SEC: (libc)CPU Time.
* COLL_WEIGHTS_MAX: (libc)Utility Limits.
* CPU_CLR: (libc)CPU Affinity.
* CPU_ISSET: (libc)CPU Affinity.
* CPU_SET: (libc)CPU Affinity.
* CPU_SETSIZE: (libc)CPU Affinity.
* CPU_ZERO: (libc)CPU Affinity.
* CREAD: (libc)Control Modes.
* CRTS_IFLOW: (libc)Control Modes.
* CS5: (libc)Control Modes.
* CS6: (libc)Control Modes.
* CS7: (libc)Control Modes.
* CS8: (libc)Control Modes.
* CSIZE: (libc)Control Modes.
* CSTOPB: (libc)Control Modes.
* DES_FAILED: (libc)DES Encryption.
* DTTOIF: (libc)Directory Entries.
* E2BIG: (libc)Error Codes.
* EACCES: (libc)Error Codes.
* EADDRINUSE: (libc)Error Codes.
* EADDRNOTAVAIL: (libc)Error Codes.
* EADV: (libc)Error Codes.
* EAFNOSUPPORT: (libc)Error Codes.
* EAGAIN: (libc)Error Codes.
* EALREADY: (libc)Error Codes.
* EAUTH: (libc)Error Codes.
* EBACKGROUND: (libc)Error Codes.
* EBADE: (libc)Error Codes.
* EBADF: (libc)Error Codes.
* EBADFD: (libc)Error Codes.
* EBADMSG: (libc)Error Codes.
* EBADR: (libc)Error Codes.
* EBADRPC: (libc)Error Codes.
* EBADRQC: (libc)Error Codes.
* EBADSLT: (libc)Error Codes.
* EBFONT: (libc)Error Codes.
* EBUSY: (libc)Error Codes.
* ECANCELED: (libc)Error Codes.
* ECHILD: (libc)Error Codes.
* ECHO: (libc)Local Modes.
* ECHOCTL: (libc)Local Modes.
* ECHOE: (libc)Local Modes.
* ECHOK: (libc)Local Modes.
* ECHOKE: (libc)Local Modes.
* ECHONL: (libc)Local Modes.
* ECHOPRT: (libc)Local Modes.
* ECHRNG: (libc)Error Codes.
* ECOMM: (libc)Error Codes.
* ECONNABORTED: (libc)Error Codes.
* ECONNREFUSED: (libc)Error Codes.
* ECONNRESET: (libc)Error Codes.
* ED: (libc)Error Codes.
* EDEADLK: (libc)Error Codes.
* EDEADLOCK: (libc)Error Codes.
* EDESTADDRREQ: (libc)Error Codes.
* EDIED: (libc)Error Codes.
* EDOM: (libc)Error Codes.
* EDOTDOT: (libc)Error Codes.
* EDQUOT: (libc)Error Codes.
* EEXIST: (libc)Error Codes.
* EFAULT: (libc)Error Codes.
* EFBIG: (libc)Error Codes.
* EFTYPE: (libc)Error Codes.
* EGRATUITOUS: (libc)Error Codes.
* EGREGIOUS: (libc)Error Codes.
* EHOSTDOWN: (libc)Error Codes.
* EHOSTUNREACH: (libc)Error Codes.
* EHWPOISON: (libc)Error Codes.
* EIDRM: (libc)Error Codes.
* EIEIO: (libc)Error Codes.
* EILSEQ: (libc)Error Codes.
* EINPROGRESS: (libc)Error Codes.
* EINTR: (libc)Error Codes.
* EINVAL: (libc)Error Codes.
* EIO: (libc)Error Codes.
* EISCONN: (libc)Error Codes.
* EISDIR: (libc)Error Codes.
* EISNAM: (libc)Error Codes.
* EKEYEXPIRED: (libc)Error Codes.
* EKEYREJECTED: (libc)Error Codes.
* EKEYREVOKED: (libc)Error Codes.
* EL2HLT: (libc)Error Codes.
* EL2NSYNC: (libc)Error Codes.
* EL3HLT: (libc)Error Codes.
* EL3RST: (libc)Error Codes.
* ELIBACC: (libc)Error Codes.
* ELIBBAD: (libc)Error Codes.
* ELIBEXEC: (libc)Error Codes.
* ELIBMAX: (libc)Error Codes.
* ELIBSCN: (libc)Error Codes.
* ELNRNG: (libc)Error Codes.
* ELOOP: (libc)Error Codes.
* EMEDIUMTYPE: (libc)Error Codes.
* EMFILE: (libc)Error Codes.
* EMLINK: (libc)Error Codes.
* EMSGSIZE: (libc)Error Codes.
* EMULTIHOP: (libc)Error Codes.
* ENAMETOOLONG: (libc)Error Codes.
* ENAVAIL: (libc)Error Codes.
* ENEEDAUTH: (libc)Error Codes.
* ENETDOWN: (libc)Error Codes.
* ENETRESET: (libc)Error Codes.
* ENETUNREACH: (libc)Error Codes.
* ENFILE: (libc)Error Codes.
* ENOANO: (libc)Error Codes.
* ENOBUFS: (libc)Error Codes.
* ENOCSI: (libc)Error Codes.
* ENODATA: (libc)Error Codes.
* ENODEV: (libc)Error Codes.
* ENOENT: (libc)Error Codes.
* ENOEXEC: (libc)Error Codes.
* ENOKEY: (libc)Error Codes.
* ENOLCK: (libc)Error Codes.
* ENOLINK: (libc)Error Codes.
* ENOMEDIUM: (libc)Error Codes.
* ENOMEM: (libc)Error Codes.
* ENOMSG: (libc)Error Codes.
* ENONET: (libc)Error Codes.
* ENOPKG: (libc)Error Codes.
* ENOPROTOOPT: (libc)Error Codes.
* ENOSPC: (libc)Error Codes.
* ENOSR: (libc)Error Codes.
* ENOSTR: (libc)Error Codes.
* ENOSYS: (libc)Error Codes.
* ENOTBLK: (libc)Error Codes.
* ENOTCONN: (libc)Error Codes.
* ENOTDIR: (libc)Error Codes.
* ENOTEMPTY: (libc)Error Codes.
* ENOTNAM: (libc)Error Codes.
* ENOTRECOVERABLE: (libc)Error Codes.
* ENOTSOCK: (libc)Error Codes.
* ENOTSUP: (libc)Error Codes.
* ENOTTY: (libc)Error Codes.
* ENOTUNIQ: (libc)Error Codes.
* ENXIO: (libc)Error Codes.
* EOF: (libc)EOF and Errors.
* EOPNOTSUPP: (libc)Error Codes.
* EOVERFLOW: (libc)Error Codes.
* EOWNERDEAD: (libc)Error Codes.
* EPERM: (libc)Error Codes.
* EPFNOSUPPORT: (libc)Error Codes.
* EPIPE: (libc)Error Codes.
* EPROCLIM: (libc)Error Codes.
* EPROCUNAVAIL: (libc)Error Codes.
* EPROGMISMATCH: (libc)Error Codes.
* EPROGUNAVAIL: (libc)Error Codes.
* EPROTO: (libc)Error Codes.
* EPROTONOSUPPORT: (libc)Error Codes.
* EPROTOTYPE: (libc)Error Codes.
* EQUIV_CLASS_MAX: (libc)Utility Limits.
* ERANGE: (libc)Error Codes.
* EREMCHG: (libc)Error Codes.
* EREMOTE: (libc)Error Codes.
* EREMOTEIO: (libc)Error Codes.
* ERESTART: (libc)Error Codes.
* ERFKILL: (libc)Error Codes.
* EROFS: (libc)Error Codes.
* ERPCMISMATCH: (libc)Error Codes.
* ESHUTDOWN: (libc)Error Codes.
* ESOCKTNOSUPPORT: (libc)Error Codes.
* ESPIPE: (libc)Error Codes.
* ESRCH: (libc)Error Codes.
* ESRMNT: (libc)Error Codes.
* ESTALE: (libc)Error Codes.
* ESTRPIPE: (libc)Error Codes.
* ETIME: (libc)Error Codes.
* ETIMEDOUT: (libc)Error Codes.
* ETOOMANYREFS: (libc)Error Codes.
* ETXTBSY: (libc)Error Codes.
* EUCLEAN: (libc)Error Codes.
* EUNATCH: (libc)Error Codes.
* EUSERS: (libc)Error Codes.
* EWOULDBLOCK: (libc)Error Codes.
* EXDEV: (libc)Error Codes.
* EXFULL: (libc)Error Codes.
* EXIT_FAILURE: (libc)Exit Status.
* EXIT_SUCCESS: (libc)Exit Status.
* EXPR_NEST_MAX: (libc)Utility Limits.
* FD_CLOEXEC: (libc)Descriptor Flags.
* FD_CLR: (libc)Waiting for I/O.
* FD_ISSET: (libc)Waiting for I/O.
* FD_SET: (libc)Waiting for I/O.
* FD_SETSIZE: (libc)Waiting for I/O.
* FD_ZERO: (libc)Waiting for I/O.
* FILENAME_MAX: (libc)Limits for Files.
* FLUSHO: (libc)Local Modes.
* FOPEN_MAX: (libc)Opening Streams.
* FP_ILOGB0: (libc)Exponents and Logarithms.
* FP_ILOGBNAN: (libc)Exponents and Logarithms.
* F_DUPFD: (libc)Duplicating Descriptors.
* F_GETFD: (libc)Descriptor Flags.
* F_GETFL: (libc)Getting File Status Flags.
* F_GETLK: (libc)File Locks.
* F_GETOWN: (libc)Interrupt Input.
* F_OFD_GETLK: (libc)Open File Description Locks.
* F_OFD_SETLK: (libc)Open File Description Locks.
* F_OFD_SETLKW: (libc)Open File Description Locks.
* F_OK: (libc)Testing File Access.
* F_SETFD: (libc)Descriptor Flags.
* F_SETFL: (libc)Getting File Status Flags.
* F_SETLK: (libc)File Locks.
* F_SETLKW: (libc)File Locks.
* F_SETOWN: (libc)Interrupt Input.
* HUGE_VAL: (libc)Math Error Reporting.
* HUGE_VALF: (libc)Math Error Reporting.
* HUGE_VALL: (libc)Math Error Reporting.
* HUPCL: (libc)Control Modes.
* I: (libc)Complex Numbers.
* ICANON: (libc)Local Modes.
* ICRNL: (libc)Input Modes.
* IEXTEN: (libc)Local Modes.
* IFNAMSIZ: (libc)Interface Naming.
* IFTODT: (libc)Directory Entries.
* IGNBRK: (libc)Input Modes.
* IGNCR: (libc)Input Modes.
* IGNPAR: (libc)Input Modes.
* IMAXBEL: (libc)Input Modes.
* INADDR_ANY: (libc)Host Address Data Type.
* INADDR_BROADCAST: (libc)Host Address Data Type.
* INADDR_LOOPBACK: (libc)Host Address Data Type.
* INADDR_NONE: (libc)Host Address Data Type.
* INFINITY: (libc)Infinity and NaN.
* INLCR: (libc)Input Modes.
* INPCK: (libc)Input Modes.
* IPPORT_RESERVED: (libc)Ports.
* IPPORT_USERRESERVED: (libc)Ports.
* ISIG: (libc)Local Modes.
* ISTRIP: (libc)Input Modes.
* IXANY: (libc)Input Modes.
* IXOFF: (libc)Input Modes.
* IXON: (libc)Input Modes.
* LINE_MAX: (libc)Utility Limits.
* LINK_MAX: (libc)Limits for Files.
* L_ctermid: (libc)Identifying the Terminal.
* L_cuserid: (libc)Who Logged In.
* L_tmpnam: (libc)Temporary Files.
* MAXNAMLEN: (libc)Limits for Files.
* MAXSYMLINKS: (libc)Symbolic Links.
* MAX_CANON: (libc)Limits for Files.
* MAX_INPUT: (libc)Limits for Files.
* MB_CUR_MAX: (libc)Selecting the Conversion.
* MB_LEN_MAX: (libc)Selecting the Conversion.
* MDMBUF: (libc)Control Modes.
* MSG_DONTROUTE: (libc)Socket Data Options.
* MSG_OOB: (libc)Socket Data Options.
* MSG_PEEK: (libc)Socket Data Options.
* NAME_MAX: (libc)Limits for Files.
* NAN: (libc)Infinity and NaN.
* NCCS: (libc)Mode Data Types.
* NGROUPS_MAX: (libc)General Limits.
* NOFLSH: (libc)Local Modes.
* NOKERNINFO: (libc)Local Modes.
* NSIG: (libc)Standard Signals.
* NULL: (libc)Null Pointer Constant.
* ONLCR: (libc)Output Modes.
* ONOEOT: (libc)Output Modes.
* OPEN_MAX: (libc)General Limits.
* OPOST: (libc)Output Modes.
* OXTABS: (libc)Output Modes.
* O_ACCMODE: (libc)Access Modes.
* O_APPEND: (libc)Operating Modes.
* O_ASYNC: (libc)Operating Modes.
* O_CREAT: (libc)Open-time Flags.
* O_EXCL: (libc)Open-time Flags.
* O_EXEC: (libc)Access Modes.
* O_EXLOCK: (libc)Open-time Flags.
* O_FSYNC: (libc)Operating Modes.
* O_IGNORE_CTTY: (libc)Open-time Flags.
* O_NDELAY: (libc)Operating Modes.
* O_NOATIME: (libc)Operating Modes.
* O_NOCTTY: (libc)Open-time Flags.
* O_NOLINK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Operating Modes.
* O_NOTRANS: (libc)Open-time Flags.
* O_RDONLY: (libc)Access Modes.
* O_RDWR: (libc)Access Modes.
* O_READ: (libc)Access Modes.
* O_SHLOCK: (libc)Open-time Flags.
* O_SYNC: (libc)Operating Modes.
* O_TRUNC: (libc)Open-time Flags.
* O_WRITE: (libc)Access Modes.
* O_WRONLY: (libc)Access Modes.
* PARENB: (libc)Control Modes.
* PARMRK: (libc)Input Modes.
* PARODD: (libc)Control Modes.
* PATH_MAX: (libc)Limits for Files.
* PA_FLAG_MASK: (libc)Parsing a Template String.
* PENDIN: (libc)Local Modes.
* PF_FILE: (libc)Local Namespace Details.
* PF_INET6: (libc)Internet Namespace.
* PF_INET: (libc)Internet Namespace.
* PF_LOCAL: (libc)Local Namespace Details.
* PF_UNIX: (libc)Local Namespace Details.
* PIPE_BUF: (libc)Limits for Files.
* P_tmpdir: (libc)Temporary Files.
* RAND_MAX: (libc)ISO Random.
* RE_DUP_MAX: (libc)General Limits.
* RLIM_INFINITY: (libc)Limits on Resources.
* R_OK: (libc)Testing File Access.
* SA_NOCLDSTOP: (libc)Flags for Sigaction.
* SA_ONSTACK: (libc)Flags for Sigaction.
* SA_RESTART: (libc)Flags for Sigaction.
* SEEK_CUR: (libc)File Positioning.
* SEEK_END: (libc)File Positioning.
* SEEK_SET: (libc)File Positioning.
* SIGABRT: (libc)Program Error Signals.
* SIGALRM: (libc)Alarm Signals.
* SIGBUS: (libc)Program Error Signals.
* SIGCHLD: (libc)Job Control Signals.
* SIGCLD: (libc)Job Control Signals.
* SIGCONT: (libc)Job Control Signals.
* SIGEMT: (libc)Program Error Signals.
* SIGFPE: (libc)Program Error Signals.
* SIGHUP: (libc)Termination Signals.
* SIGILL: (libc)Program Error Signals.
* SIGINFO: (libc)Miscellaneous Signals.
* SIGINT: (libc)Termination Signals.
* SIGIO: (libc)Asynchronous I/O Signals.
* SIGIOT: (libc)Program Error Signals.
* SIGKILL: (libc)Termination Signals.
* SIGLOST: (libc)Operation Error Signals.
* SIGPIPE: (libc)Operation Error Signals.
* SIGPOLL: (libc)Asynchronous I/O Signals.
* SIGPROF: (libc)Alarm Signals.
* SIGQUIT: (libc)Termination Signals.
* SIGSEGV: (libc)Program Error Signals.
* SIGSTOP: (libc)Job Control Signals.
* SIGSYS: (libc)Program Error Signals.
* SIGTERM: (libc)Termination Signals.
* SIGTRAP: (libc)Program Error Signals.
* SIGTSTP: (libc)Job Control Signals.
* SIGTTIN: (libc)Job Control Signals.
* SIGTTOU: (libc)Job Control Signals.
* SIGURG: (libc)Asynchronous I/O Signals.
* SIGUSR1: (libc)Miscellaneous Signals.
* SIGUSR2: (libc)Miscellaneous Signals.
* SIGVTALRM: (libc)Alarm Signals.
* SIGWINCH: (libc)Miscellaneous Signals.
* SIGXCPU: (libc)Operation Error Signals.
* SIGXFSZ: (libc)Operation Error Signals.
* SIG_ERR: (libc)Basic Signal Handling.
* SOCK_DGRAM: (libc)Communication Styles.
* SOCK_RAW: (libc)Communication Styles.
* SOCK_RDM: (libc)Communication Styles.
* SOCK_SEQPACKET: (libc)Communication Styles.
* SOCK_STREAM: (libc)Communication Styles.
* SOL_SOCKET: (libc)Socket-Level Options.
* SSIZE_MAX: (libc)General Limits.
* STREAM_MAX: (libc)General Limits.
* SUN_LEN: (libc)Local Namespace Details.
* S_IFMT: (libc)Testing File Type.
* S_ISBLK: (libc)Testing File Type.
* S_ISCHR: (libc)Testing File Type.
* S_ISDIR: (libc)Testing File Type.
* S_ISFIFO: (libc)Testing File Type.
* S_ISLNK: (libc)Testing File Type.
* S_ISREG: (libc)Testing File Type.
* S_ISSOCK: (libc)Testing File Type.
* S_TYPEISMQ: (libc)Testing File Type.
* S_TYPEISSEM: (libc)Testing File Type.
* S_TYPEISSHM: (libc)Testing File Type.
* TMP_MAX: (libc)Temporary Files.
* TOSTOP: (libc)Local Modes.
* TZNAME_MAX: (libc)General Limits.
* VDISCARD: (libc)Other Special.
* VDSUSP: (libc)Signal Characters.
* VEOF: (libc)Editing Characters.
* VEOL2: (libc)Editing Characters.
* VEOL: (libc)Editing Characters.
* VERASE: (libc)Editing Characters.
* VINTR: (libc)Signal Characters.
* VKILL: (libc)Editing Characters.
* VLNEXT: (libc)Other Special.
* VMIN: (libc)Noncanonical Input.
* VQUIT: (libc)Signal Characters.
* VREPRINT: (libc)Editing Characters.
* VSTART: (libc)Start/Stop Characters.
* VSTATUS: (libc)Other Special.
* VSTOP: (libc)Start/Stop Characters.
* VSUSP: (libc)Signal Characters.
* VTIME: (libc)Noncanonical Input.
* VWERASE: (libc)Editing Characters.
* WCHAR_MAX: (libc)Extended Char Intro.
* WCHAR_MIN: (libc)Extended Char Intro.
* WCOREDUMP: (libc)Process Completion Status.
* WEOF: (libc)EOF and Errors.
* WEOF: (libc)Extended Char Intro.
* WEXITSTATUS: (libc)Process Completion Status.
* WIFEXITED: (libc)Process Completion Status.
* WIFSIGNALED: (libc)Process Completion Status.
* WIFSTOPPED: (libc)Process Completion Status.
* WSTOPSIG: (libc)Process Completion Status.
* WTERMSIG: (libc)Process Completion Status.
* W_OK: (libc)Testing File Access.
* X_OK: (libc)Testing File Access.
* _Complex_I: (libc)Complex Numbers.
* _Exit: (libc)Termination Internals.
* _IOFBF: (libc)Controlling Buffering.
* _IOLBF: (libc)Controlling Buffering.
* _IONBF: (libc)Controlling Buffering.
* _Imaginary_I: (libc)Complex Numbers.
* _PATH_UTMP: (libc)Manipulating the Database.
* _PATH_WTMP: (libc)Manipulating the Database.
* _POSIX2_C_DEV: (libc)System Options.
* _POSIX2_C_VERSION: (libc)Version Supported.
* _POSIX2_FORT_DEV: (libc)System Options.
* _POSIX2_FORT_RUN: (libc)System Options.
* _POSIX2_LOCALEDEF: (libc)System Options.
* _POSIX2_SW_DEV: (libc)System Options.
* _POSIX_CHOWN_RESTRICTED: (libc)Options for Files.
* _POSIX_JOB_CONTROL: (libc)System Options.
* _POSIX_NO_TRUNC: (libc)Options for Files.
* _POSIX_SAVED_IDS: (libc)System Options.
* _POSIX_VDISABLE: (libc)Options for Files.
* _POSIX_VERSION: (libc)Version Supported.
* __fbufsize: (libc)Controlling Buffering.
* __flbf: (libc)Controlling Buffering.
* __fpending: (libc)Controlling Buffering.
* __fpurge: (libc)Flushing Buffers.
* __freadable: (libc)Opening Streams.
* __freading: (libc)Opening Streams.
* __fsetlocking: (libc)Streams and Threads.
* __fwritable: (libc)Opening Streams.
* __fwriting: (libc)Opening Streams.
* __gconv_end_fct: (libc)glibc iconv Implementation.
* __gconv_fct: (libc)glibc iconv Implementation.
* __gconv_init_fct: (libc)glibc iconv Implementation.
* __ppc_get_timebase: (libc)PowerPC.
* __ppc_get_timebase_freq: (libc)PowerPC.
* __ppc_mdoio: (libc)PowerPC.
* __ppc_mdoom: (libc)PowerPC.
* __ppc_set_ppr_low: (libc)PowerPC.
* __ppc_set_ppr_med: (libc)PowerPC.
* __ppc_set_ppr_med_high: (libc)PowerPC.
* __ppc_set_ppr_med_low: (libc)PowerPC.
* __ppc_set_ppr_very_low: (libc)PowerPC.
* __ppc_yield: (libc)PowerPC.
* __va_copy: (libc)Argument Macros.
* _exit: (libc)Termination Internals.
* _flushlbf: (libc)Flushing Buffers.
* _tolower: (libc)Case Conversion.
* _toupper: (libc)Case Conversion.
* a64l: (libc)Encode Binary Data.
* abort: (libc)Aborting a Program.
* abs: (libc)Absolute Value.
* accept: (libc)Accepting Connections.
* access: (libc)Testing File Access.
* acos: (libc)Inverse Trig Functions.
* acosf: (libc)Inverse Trig Functions.
* acosh: (libc)Hyperbolic Functions.
* acoshf: (libc)Hyperbolic Functions.
* acoshl: (libc)Hyperbolic Functions.
* acosl: (libc)Inverse Trig Functions.
* addmntent: (libc)mtab.
* addseverity: (libc)Adding Severity Classes.
* adjtime: (libc)High-Resolution Calendar.
* adjtimex: (libc)High-Resolution Calendar.
* aio_cancel64: (libc)Cancel AIO Operations.
* aio_cancel: (libc)Cancel AIO Operations.
* aio_error64: (libc)Status of AIO Operations.
* aio_error: (libc)Status of AIO Operations.
* aio_fsync64: (libc)Synchronizing AIO Operations.
* aio_fsync: (libc)Synchronizing AIO Operations.
* aio_init: (libc)Configuration of AIO.
* aio_read64: (libc)Asynchronous Reads/Writes.
* aio_read: (libc)Asynchronous Reads/Writes.
* aio_return64: (libc)Status of AIO Operations.
* aio_return: (libc)Status of AIO Operations.
* aio_suspend64: (libc)Synchronizing AIO Operations.
* aio_suspend: (libc)Synchronizing AIO Operations.
* aio_write64: (libc)Asynchronous Reads/Writes.
* aio_write: (libc)Asynchronous Reads/Writes.
* alarm: (libc)Setting an Alarm.
* aligned_alloc: (libc)Aligned Memory Blocks.
* alloca: (libc)Variable Size Automatic.
* alphasort64: (libc)Scanning Directory Content.
* alphasort: (libc)Scanning Directory Content.
* argp_error: (libc)Argp Helper Functions.
* argp_failure: (libc)Argp Helper Functions.
* argp_help: (libc)Argp Help.
* argp_parse: (libc)Argp.
* argp_state_help: (libc)Argp Helper Functions.
* argp_usage: (libc)Argp Helper Functions.
* argz_add: (libc)Argz Functions.
* argz_add_sep: (libc)Argz Functions.
* argz_append: (libc)Argz Functions.
* argz_count: (libc)Argz Functions.
* argz_create: (libc)Argz Functions.
* argz_create_sep: (libc)Argz Functions.
* argz_delete: (libc)Argz Functions.
* argz_extract: (libc)Argz Functions.
* argz_insert: (libc)Argz Functions.
* argz_next: (libc)Argz Functions.
* argz_replace: (libc)Argz Functions.
* argz_stringify: (libc)Argz Functions.
* asctime: (libc)Formatting Calendar Time.
* asctime_r: (libc)Formatting Calendar Time.
* asin: (libc)Inverse Trig Functions.
* asinf: (libc)Inverse Trig Functions.
* asinh: (libc)Hyperbolic Functions.
* asinhf: (libc)Hyperbolic Functions.
* asinhl: (libc)Hyperbolic Functions.
* asinl: (libc)Inverse Trig Functions.
* asprintf: (libc)Dynamic Output.
* assert: (libc)Consistency Checking.
* assert_perror: (libc)Consistency Checking.
* atan2: (libc)Inverse Trig Functions.
* atan2f: (libc)Inverse Trig Functions.
* atan2l: (libc)Inverse Trig Functions.
* atan: (libc)Inverse Trig Functions.
* atanf: (libc)Inverse Trig Functions.
* atanh: (libc)Hyperbolic Functions.
* atanhf: (libc)Hyperbolic Functions.
* atanhl: (libc)Hyperbolic Functions.
* atanl: (libc)Inverse Trig Functions.
* atexit: (libc)Cleanups on Exit.
* atof: (libc)Parsing of Floats.
* atoi: (libc)Parsing of Integers.
* atol: (libc)Parsing of Integers.
* atoll: (libc)Parsing of Integers.
* backtrace: (libc)Backtraces.
* backtrace_symbols: (libc)Backtraces.
* backtrace_symbols_fd: (libc)Backtraces.
* basename: (libc)Finding Tokens in a String.
* basename: (libc)Finding Tokens in a String.
* bcmp: (libc)String/Array Comparison.
* bcopy: (libc)Copying Strings and Arrays.
* bind: (libc)Setting Address.
* bind_textdomain_codeset: (libc)Charset conversion in gettext.
* bindtextdomain: (libc)Locating gettext catalog.
* brk: (libc)Resizing the Data Segment.
* bsearch: (libc)Array Search Function.
* btowc: (libc)Converting a Character.
* bzero: (libc)Copying Strings and Arrays.
* cabs: (libc)Absolute Value.
* cabsf: (libc)Absolute Value.
* cabsl: (libc)Absolute Value.
* cacos: (libc)Inverse Trig Functions.
* cacosf: (libc)Inverse Trig Functions.
* cacosh: (libc)Hyperbolic Functions.
* cacoshf: (libc)Hyperbolic Functions.
* cacoshl: (libc)Hyperbolic Functions.
* cacosl: (libc)Inverse Trig Functions.
* calloc: (libc)Allocating Cleared Space.
* canonicalize_file_name: (libc)Symbolic Links.
* carg: (libc)Operations on Complex.
* cargf: (libc)Operations on Complex.
* cargl: (libc)Operations on Complex.
* casin: (libc)Inverse Trig Functions.
* casinf: (libc)Inverse Trig Functions.
* casinh: (libc)Hyperbolic Functions.
* casinhf: (libc)Hyperbolic Functions.
* casinhl: (libc)Hyperbolic Functions.
* casinl: (libc)Inverse Trig Functions.
* catan: (libc)Inverse Trig Functions.
* catanf: (libc)Inverse Trig Functions.
* catanh: (libc)Hyperbolic Functions.
* catanhf: (libc)Hyperbolic Functions.
* catanhl: (libc)Hyperbolic Functions.
* catanl: (libc)Inverse Trig Functions.
* catclose: (libc)The catgets Functions.
* catgets: (libc)The catgets Functions.
* catopen: (libc)The catgets Functions.
* cbc_crypt: (libc)DES Encryption.
* cbrt: (libc)Exponents and Logarithms.
* cbrtf: (libc)Exponents and Logarithms.
* cbrtl: (libc)Exponents and Logarithms.
* ccos: (libc)Trig Functions.
* ccosf: (libc)Trig Functions.
* ccosh: (libc)Hyperbolic Functions.
* ccoshf: (libc)Hyperbolic Functions.
* ccoshl: (libc)Hyperbolic Functions.
* ccosl: (libc)Trig Functions.
* ceil: (libc)Rounding Functions.
* ceilf: (libc)Rounding Functions.
* ceill: (libc)Rounding Functions.
* cexp: (libc)Exponents and Logarithms.
* cexpf: (libc)Exponents and Logarithms.
* cexpl: (libc)Exponents and Logarithms.
* cfgetispeed: (libc)Line Speed.
* cfgetospeed: (libc)Line Speed.
* cfmakeraw: (libc)Noncanonical Input.
* cfree: (libc)Freeing after Malloc.
* cfsetispeed: (libc)Line Speed.
* cfsetospeed: (libc)Line Speed.
* cfsetspeed: (libc)Line Speed.
* chdir: (libc)Working Directory.
* chmod: (libc)Setting Permissions.
* chown: (libc)File Owner.
* cimag: (libc)Operations on Complex.
* cimagf: (libc)Operations on Complex.
* cimagl: (libc)Operations on Complex.
* clearenv: (libc)Environment Access.
* clearerr: (libc)Error Recovery.
* clearerr_unlocked: (libc)Error Recovery.
* clock: (libc)CPU Time.
* clog10: (libc)Exponents and Logarithms.
* clog10f: (libc)Exponents and Logarithms.
* clog10l: (libc)Exponents and Logarithms.
* clog: (libc)Exponents and Logarithms.
* clogf: (libc)Exponents and Logarithms.
* clogl: (libc)Exponents and Logarithms.
* close: (libc)Opening and Closing Files.
* closedir: (libc)Reading/Closing Directory.
* closelog: (libc)closelog.
* confstr: (libc)String Parameters.
* conj: (libc)Operations on Complex.
* conjf: (libc)Operations on Complex.
* conjl: (libc)Operations on Complex.
* connect: (libc)Connecting.
* copysign: (libc)FP Bit Twiddling.
* copysignf: (libc)FP Bit Twiddling.
* copysignl: (libc)FP Bit Twiddling.
* cos: (libc)Trig Functions.
* cosf: (libc)Trig Functions.
* cosh: (libc)Hyperbolic Functions.
* coshf: (libc)Hyperbolic Functions.
* coshl: (libc)Hyperbolic Functions.
* cosl: (libc)Trig Functions.
* cpow: (libc)Exponents and Logarithms.
* cpowf: (libc)Exponents and Logarithms.
* cpowl: (libc)Exponents and Logarithms.
* cproj: (libc)Operations on Complex.
* cprojf: (libc)Operations on Complex.
* cprojl: (libc)Operations on Complex.
* creal: (libc)Operations on Complex.
* crealf: (libc)Operations on Complex.
* creall: (libc)Operations on Complex.
* creat64: (libc)Opening and Closing Files.
* creat: (libc)Opening and Closing Files.
* crypt: (libc)crypt.
* crypt_r: (libc)crypt.
* csin: (libc)Trig Functions.
* csinf: (libc)Trig Functions.
* csinh: (libc)Hyperbolic Functions.
* csinhf: (libc)Hyperbolic Functions.
* csinhl: (libc)Hyperbolic Functions.
* csinl: (libc)Trig Functions.
* csqrt: (libc)Exponents and Logarithms.
* csqrtf: (libc)Exponents and Logarithms.
* csqrtl: (libc)Exponents and Logarithms.
* ctan: (libc)Trig Functions.
* ctanf: (libc)Trig Functions.
* ctanh: (libc)Hyperbolic Functions.
* ctanhf: (libc)Hyperbolic Functions.
* ctanhl: (libc)Hyperbolic Functions.
* ctanl: (libc)Trig Functions.
* ctermid: (libc)Identifying the Terminal.
* ctime: (libc)Formatting Calendar Time.
* ctime_r: (libc)Formatting Calendar Time.
* cuserid: (libc)Who Logged In.
* dcgettext: (libc)Translation with gettext.
* dcngettext: (libc)Advanced gettext functions.
* des_setparity: (libc)DES Encryption.
* dgettext: (libc)Translation with gettext.
* difftime: (libc)Elapsed Time.
* dirfd: (libc)Opening a Directory.
* dirname: (libc)Finding Tokens in a String.
* div: (libc)Integer Division.
* dngettext: (libc)Advanced gettext functions.
* drand48: (libc)SVID Random.
* drand48_r: (libc)SVID Random.
* drem: (libc)Remainder Functions.
* dremf: (libc)Remainder Functions.
* dreml: (libc)Remainder Functions.
* dup2: (libc)Duplicating Descriptors.
* dup: (libc)Duplicating Descriptors.
* ecb_crypt: (libc)DES Encryption.
* ecvt: (libc)System V Number Conversion.
* ecvt_r: (libc)System V Number Conversion.
* encrypt: (libc)DES Encryption.
* encrypt_r: (libc)DES Encryption.
* endfsent: (libc)fstab.
* endgrent: (libc)Scanning All Groups.
* endhostent: (libc)Host Names.
* endmntent: (libc)mtab.
* endnetent: (libc)Networks Database.
* endnetgrent: (libc)Lookup Netgroup.
* endprotoent: (libc)Protocols Database.
* endpwent: (libc)Scanning All Users.
* endservent: (libc)Services Database.
* endutent: (libc)Manipulating the Database.
* endutxent: (libc)XPG Functions.
* envz_add: (libc)Envz Functions.
* envz_entry: (libc)Envz Functions.
* envz_get: (libc)Envz Functions.
* envz_merge: (libc)Envz Functions.
* envz_remove: (libc)Envz Functions.
* envz_strip: (libc)Envz Functions.
* erand48: (libc)SVID Random.
* erand48_r: (libc)SVID Random.
* erf: (libc)Special Functions.
* erfc: (libc)Special Functions.
* erfcf: (libc)Special Functions.
* erfcl: (libc)Special Functions.
* erff: (libc)Special Functions.
* erfl: (libc)Special Functions.
* err: (libc)Error Messages.
* errno: (libc)Checking for Errors.
* error: (libc)Error Messages.
* error_at_line: (libc)Error Messages.
* errx: (libc)Error Messages.
* execl: (libc)Executing a File.
* execle: (libc)Executing a File.
* execlp: (libc)Executing a File.
* execv: (libc)Executing a File.
* execve: (libc)Executing a File.
* execvp: (libc)Executing a File.
* exit: (libc)Normal Termination.
* exp10: (libc)Exponents and Logarithms.
* exp10f: (libc)Exponents and Logarithms.
* exp10l: (libc)Exponents and Logarithms.
* exp2: (libc)Exponents and Logarithms.
* exp2f: (libc)Exponents and Logarithms.
* exp2l: (libc)Exponents and Logarithms.
* exp: (libc)Exponents and Logarithms.
* expf: (libc)Exponents and Logarithms.
* expl: (libc)Exponents and Logarithms.
* expm1: (libc)Exponents and Logarithms.
* expm1f: (libc)Exponents and Logarithms.
* expm1l: (libc)Exponents and Logarithms.
* fabs: (libc)Absolute Value.
* fabsf: (libc)Absolute Value.
* fabsl: (libc)Absolute Value.
* fchdir: (libc)Working Directory.
* fchmod: (libc)Setting Permissions.
* fchown: (libc)File Owner.
* fclose: (libc)Closing Streams.
* fcloseall: (libc)Closing Streams.
* fcntl: (libc)Control Operations.
* fcvt: (libc)System V Number Conversion.
* fcvt_r: (libc)System V Number Conversion.
* fdatasync: (libc)Synchronizing I/O.
* fdim: (libc)Misc FP Arithmetic.
* fdimf: (libc)Misc FP Arithmetic.
* fdiml: (libc)Misc FP Arithmetic.
* fdopen: (libc)Descriptors and Streams.
* fdopendir: (libc)Opening a Directory.
* feclearexcept: (libc)Status bit operations.
* fedisableexcept: (libc)Control Functions.
* feenableexcept: (libc)Control Functions.
* fegetenv: (libc)Control Functions.
* fegetexcept: (libc)Control Functions.
* fegetexceptflag: (libc)Status bit operations.
* fegetround: (libc)Rounding.
* feholdexcept: (libc)Control Functions.
* feof: (libc)EOF and Errors.
* feof_unlocked: (libc)EOF and Errors.
* feraiseexcept: (libc)Status bit operations.
* ferror: (libc)EOF and Errors.
* ferror_unlocked: (libc)EOF and Errors.
* fesetenv: (libc)Control Functions.
* fesetexceptflag: (libc)Status bit operations.
* fesetround: (libc)Rounding.
* fetestexcept: (libc)Status bit operations.
* feupdateenv: (libc)Control Functions.
* fflush: (libc)Flushing Buffers.
* fflush_unlocked: (libc)Flushing Buffers.
* fgetc: (libc)Character Input.
* fgetc_unlocked: (libc)Character Input.
* fgetgrent: (libc)Scanning All Groups.
* fgetgrent_r: (libc)Scanning All Groups.
* fgetpos64: (libc)Portable Positioning.
* fgetpos: (libc)Portable Positioning.
* fgetpwent: (libc)Scanning All Users.
* fgetpwent_r: (libc)Scanning All Users.
* fgets: (libc)Line Input.
* fgets_unlocked: (libc)Line Input.
* fgetwc: (libc)Character Input.
* fgetwc_unlocked: (libc)Character Input.
* fgetws: (libc)Line Input.
* fgetws_unlocked: (libc)Line Input.
* fileno: (libc)Descriptors and Streams.
* fileno_unlocked: (libc)Descriptors and Streams.
* finite: (libc)Floating Point Classes.
* finitef: (libc)Floating Point Classes.
* finitel: (libc)Floating Point Classes.
* flockfile: (libc)Streams and Threads.
* floor: (libc)Rounding Functions.
* floorf: (libc)Rounding Functions.
* floorl: (libc)Rounding Functions.
* fma: (libc)Misc FP Arithmetic.
* fmaf: (libc)Misc FP Arithmetic.
* fmal: (libc)Misc FP Arithmetic.
* fmax: (libc)Misc FP Arithmetic.
* fmaxf: (libc)Misc FP Arithmetic.
* fmaxl: (libc)Misc FP Arithmetic.
* fmemopen: (libc)String Streams.
* fmin: (libc)Misc FP Arithmetic.
* fminf: (libc)Misc FP Arithmetic.
* fminl: (libc)Misc FP Arithmetic.
* fmod: (libc)Remainder Functions.
* fmodf: (libc)Remainder Functions.
* fmodl: (libc)Remainder Functions.
* fmtmsg: (libc)Printing Formatted Messages.
* fnmatch: (libc)Wildcard Matching.
* fopen64: (libc)Opening Streams.
* fopen: (libc)Opening Streams.
* fopencookie: (libc)Streams and Cookies.
* fork: (libc)Creating a Process.
* forkpty: (libc)Pseudo-Terminal Pairs.
* fpathconf: (libc)Pathconf.
* fpclassify: (libc)Floating Point Classes.
* fprintf: (libc)Formatted Output Functions.
* fputc: (libc)Simple Output.
* fputc_unlocked: (libc)Simple Output.
* fputs: (libc)Simple Output.
* fputs_unlocked: (libc)Simple Output.
* fputwc: (libc)Simple Output.
* fputwc_unlocked: (libc)Simple Output.
* fputws: (libc)Simple Output.
* fputws_unlocked: (libc)Simple Output.
* fread: (libc)Block Input/Output.
* fread_unlocked: (libc)Block Input/Output.
* free: (libc)Freeing after Malloc.
* freopen64: (libc)Opening Streams.
* freopen: (libc)Opening Streams.
* frexp: (libc)Normalization Functions.
* frexpf: (libc)Normalization Functions.
* frexpl: (libc)Normalization Functions.
* fscanf: (libc)Formatted Input Functions.
* fseek: (libc)File Positioning.
* fseeko64: (libc)File Positioning.
* fseeko: (libc)File Positioning.
* fsetpos64: (libc)Portable Positioning.
* fsetpos: (libc)Portable Positioning.
* fstat64: (libc)Reading Attributes.
* fstat: (libc)Reading Attributes.
* fsync: (libc)Synchronizing I/O.
* ftell: (libc)File Positioning.
* ftello64: (libc)File Positioning.
* ftello: (libc)File Positioning.
* ftruncate64: (libc)File Size.
* ftruncate: (libc)File Size.
* ftrylockfile: (libc)Streams and Threads.
* ftw64: (libc)Working with Directory Trees.
* ftw: (libc)Working with Directory Trees.
* funlockfile: (libc)Streams and Threads.
* futimes: (libc)File Times.
* fwide: (libc)Streams and I18N.
* fwprintf: (libc)Formatted Output Functions.
* fwrite: (libc)Block Input/Output.
* fwrite_unlocked: (libc)Block Input/Output.
* fwscanf: (libc)Formatted Input Functions.
* gamma: (libc)Special Functions.
* gammaf: (libc)Special Functions.
* gammal: (libc)Special Functions.
* gcvt: (libc)System V Number Conversion.
* get_avphys_pages: (libc)Query Memory Parameters.
* get_current_dir_name: (libc)Working Directory.
* get_nprocs: (libc)Processor Resources.
* get_nprocs_conf: (libc)Processor Resources.
* get_phys_pages: (libc)Query Memory Parameters.
* getauxval: (libc)Auxiliary Vector.
* getc: (libc)Character Input.
* getc_unlocked: (libc)Character Input.
* getchar: (libc)Character Input.
* getchar_unlocked: (libc)Character Input.
* getcontext: (libc)System V contexts.
* getcwd: (libc)Working Directory.
* getdate: (libc)General Time String Parsing.
* getdate_r: (libc)General Time String Parsing.
* getdelim: (libc)Line Input.
* getdomainnname: (libc)Host Identification.
* getegid: (libc)Reading Persona.
* getenv: (libc)Environment Access.
* geteuid: (libc)Reading Persona.
* getfsent: (libc)fstab.
* getfsfile: (libc)fstab.
* getfsspec: (libc)fstab.
* getgid: (libc)Reading Persona.
* getgrent: (libc)Scanning All Groups.
* getgrent_r: (libc)Scanning All Groups.
* getgrgid: (libc)Lookup Group.
* getgrgid_r: (libc)Lookup Group.
* getgrnam: (libc)Lookup Group.
* getgrnam_r: (libc)Lookup Group.
* getgrouplist: (libc)Setting Groups.
* getgroups: (libc)Reading Persona.
* gethostbyaddr: (libc)Host Names.
* gethostbyaddr_r: (libc)Host Names.
* gethostbyname2: (libc)Host Names.
* gethostbyname2_r: (libc)Host Names.
* gethostbyname: (libc)Host Names.
* gethostbyname_r: (libc)Host Names.
* gethostent: (libc)Host Names.
* gethostid: (libc)Host Identification.
* gethostname: (libc)Host Identification.
* getitimer: (libc)Setting an Alarm.
* getline: (libc)Line Input.
* getloadavg: (libc)Processor Resources.
* getlogin: (libc)Who Logged In.
* getmntent: (libc)mtab.
* getmntent_r: (libc)mtab.
* getnetbyaddr: (libc)Networks Database.
* getnetbyname: (libc)Networks Database.
* getnetent: (libc)Networks Database.
* getnetgrent: (libc)Lookup Netgroup.
* getnetgrent_r: (libc)Lookup Netgroup.
* getopt: (libc)Using Getopt.
* getopt_long: (libc)Getopt Long Options.
* getopt_long_only: (libc)Getopt Long Options.
* getpagesize: (libc)Query Memory Parameters.
* getpass: (libc)getpass.
* getpeername: (libc)Who is Connected.
* getpgid: (libc)Process Group Functions.
* getpgrp: (libc)Process Group Functions.
* getpid: (libc)Process Identification.
* getppid: (libc)Process Identification.
* getpriority: (libc)Traditional Scheduling Functions.
* getprotobyname: (libc)Protocols Database.
* getprotobynumber: (libc)Protocols Database.
* getprotoent: (libc)Protocols Database.
* getpt: (libc)Allocation.
* getpwent: (libc)Scanning All Users.
* getpwent_r: (libc)Scanning All Users.
* getpwnam: (libc)Lookup User.
* getpwnam_r: (libc)Lookup User.
* getpwuid: (libc)Lookup User.
* getpwuid_r: (libc)Lookup User.
* getrlimit64: (libc)Limits on Resources.
* getrlimit: (libc)Limits on Resources.
* getrusage: (libc)Resource Usage.
* gets: (libc)Line Input.
* getservbyname: (libc)Services Database.
* getservbyport: (libc)Services Database.
* getservent: (libc)Services Database.
* getsid: (libc)Process Group Functions.
* getsockname: (libc)Reading Address.
* getsockopt: (libc)Socket Option Functions.
* getsubopt: (libc)Suboptions.
* gettext: (libc)Translation with gettext.
* gettimeofday: (libc)High-Resolution Calendar.
* getuid: (libc)Reading Persona.
* getumask: (libc)Setting Permissions.
* getutent: (libc)Manipulating the Database.
* getutent_r: (libc)Manipulating the Database.
* getutid: (libc)Manipulating the Database.
* getutid_r: (libc)Manipulating the Database.
* getutline: (libc)Manipulating the Database.
* getutline_r: (libc)Manipulating the Database.
* getutmp: (libc)XPG Functions.
* getutmpx: (libc)XPG Functions.
* getutxent: (libc)XPG Functions.
* getutxid: (libc)XPG Functions.
* getutxline: (libc)XPG Functions.
* getw: (libc)Character Input.
* getwc: (libc)Character Input.
* getwc_unlocked: (libc)Character Input.
* getwchar: (libc)Character Input.
* getwchar_unlocked: (libc)Character Input.
* getwd: (libc)Working Directory.
* glob64: (libc)Calling Glob.
* glob: (libc)Calling Glob.
* globfree64: (libc)More Flags for Globbing.
* globfree: (libc)More Flags for Globbing.
* gmtime: (libc)Broken-down Time.
* gmtime_r: (libc)Broken-down Time.
* grantpt: (libc)Allocation.
* gsignal: (libc)Signaling Yourself.
* gtty: (libc)BSD Terminal Modes.
* hasmntopt: (libc)mtab.
* hcreate: (libc)Hash Search Function.
* hcreate_r: (libc)Hash Search Function.
* hdestroy: (libc)Hash Search Function.
* hdestroy_r: (libc)Hash Search Function.
* hsearch: (libc)Hash Search Function.
* hsearch_r: (libc)Hash Search Function.
* htonl: (libc)Byte Order.
* htons: (libc)Byte Order.
* hypot: (libc)Exponents and Logarithms.
* hypotf: (libc)Exponents and Logarithms.
* hypotl: (libc)Exponents and Logarithms.
* iconv: (libc)Generic Conversion Interface.
* iconv_close: (libc)Generic Conversion Interface.
* iconv_open: (libc)Generic Conversion Interface.
* if_freenameindex: (libc)Interface Naming.
* if_indextoname: (libc)Interface Naming.
* if_nameindex: (libc)Interface Naming.
* if_nametoindex: (libc)Interface Naming.
* ilogb: (libc)Exponents and Logarithms.
* ilogbf: (libc)Exponents and Logarithms.
* ilogbl: (libc)Exponents and Logarithms.
* imaxabs: (libc)Absolute Value.
* imaxdiv: (libc)Integer Division.
* in6addr_any: (libc)Host Address Data Type.
* in6addr_loopback: (libc)Host Address Data Type.
* index: (libc)Search Functions.
* inet_addr: (libc)Host Address Functions.
* inet_aton: (libc)Host Address Functions.
* inet_lnaof: (libc)Host Address Functions.
* inet_makeaddr: (libc)Host Address Functions.
* inet_netof: (libc)Host Address Functions.
* inet_network: (libc)Host Address Functions.
* inet_ntoa: (libc)Host Address Functions.
* inet_ntop: (libc)Host Address Functions.
* inet_pton: (libc)Host Address Functions.
* initgroups: (libc)Setting Groups.
* initstate: (libc)BSD Random.
* initstate_r: (libc)BSD Random.
* innetgr: (libc)Netgroup Membership.
* ioctl: (libc)IOCTLs.
* isalnum: (libc)Classification of Characters.
* isalpha: (libc)Classification of Characters.
* isascii: (libc)Classification of Characters.
* isatty: (libc)Is It a Terminal.
* isblank: (libc)Classification of Characters.
* iscntrl: (libc)Classification of Characters.
* isdigit: (libc)Classification of Characters.
* isfinite: (libc)Floating Point Classes.
* isgraph: (libc)Classification of Characters.
* isgreater: (libc)FP Comparison Functions.
* isgreaterequal: (libc)FP Comparison Functions.
* isinf: (libc)Floating Point Classes.
* isinff: (libc)Floating Point Classes.
* isinfl: (libc)Floating Point Classes.
* isless: (libc)FP Comparison Functions.
* islessequal: (libc)FP Comparison Functions.
* islessgreater: (libc)FP Comparison Functions.
* islower: (libc)Classification of Characters.
* isnan: (libc)Floating Point Classes.
* isnan: (libc)Floating Point Classes.
* isnanf: (libc)Floating Point Classes.
* isnanl: (libc)Floating Point Classes.
* isnormal: (libc)Floating Point Classes.
* isprint: (libc)Classification of Characters.
* ispunct: (libc)Classification of Characters.
* issignaling: (libc)Floating Point Classes.
* isspace: (libc)Classification of Characters.
* isunordered: (libc)FP Comparison Functions.
* isupper: (libc)Classification of Characters.
* iswalnum: (libc)Classification of Wide Characters.
* iswalpha: (libc)Classification of Wide Characters.
* iswblank: (libc)Classification of Wide Characters.
* iswcntrl: (libc)Classification of Wide Characters.
* iswctype: (libc)Classification of Wide Characters.
* iswdigit: (libc)Classification of Wide Characters.
* iswgraph: (libc)Classification of Wide Characters.
* iswlower: (libc)Classification of Wide Characters.
* iswprint: (libc)Classification of Wide Characters.
* iswpunct: (libc)Classification of Wide Characters.
* iswspace: (libc)Classification of Wide Characters.
* iswupper: (libc)Classification of Wide Characters.
* iswxdigit: (libc)Classification of Wide Characters.
* isxdigit: (libc)Classification of Characters.
* j0: (libc)Special Functions.
* j0f: (libc)Special Functions.
* j0l: (libc)Special Functions.
* j1: (libc)Special Functions.
* j1f: (libc)Special Functions.
* j1l: (libc)Special Functions.
* jn: (libc)Special Functions.
* jnf: (libc)Special Functions.
* jnl: (libc)Special Functions.
* jrand48: (libc)SVID Random.
* jrand48_r: (libc)SVID Random.
* kill: (libc)Signaling Another Process.
* killpg: (libc)Signaling Another Process.
* l64a: (libc)Encode Binary Data.
* labs: (libc)Absolute Value.
* lcong48: (libc)SVID Random.
* lcong48_r: (libc)SVID Random.
* ldexp: (libc)Normalization Functions.
* ldexpf: (libc)Normalization Functions.
* ldexpl: (libc)Normalization Functions.
* ldiv: (libc)Integer Division.
* lfind: (libc)Array Search Function.
* lgamma: (libc)Special Functions.
* lgamma_r: (libc)Special Functions.
* lgammaf: (libc)Special Functions.
* lgammaf_r: (libc)Special Functions.
* lgammal: (libc)Special Functions.
* lgammal_r: (libc)Special Functions.
* link: (libc)Hard Links.
* lio_listio64: (libc)Asynchronous Reads/Writes.
* lio_listio: (libc)Asynchronous Reads/Writes.
* listen: (libc)Listening.
* llabs: (libc)Absolute Value.
* lldiv: (libc)Integer Division.
* llrint: (libc)Rounding Functions.
* llrintf: (libc)Rounding Functions.
* llrintl: (libc)Rounding Functions.
* llround: (libc)Rounding Functions.
* llroundf: (libc)Rounding Functions.
* llroundl: (libc)Rounding Functions.
* localeconv: (libc)The Lame Way to Locale Data.
* localtime: (libc)Broken-down Time.
* localtime_r: (libc)Broken-down Time.
* log10: (libc)Exponents and Logarithms.
* log10f: (libc)Exponents and Logarithms.
* log10l: (libc)Exponents and Logarithms.
* log1p: (libc)Exponents and Logarithms.
* log1pf: (libc)Exponents and Logarithms.
* log1pl: (libc)Exponents and Logarithms.
* log2: (libc)Exponents and Logarithms.
* log2f: (libc)Exponents and Logarithms.
* log2l: (libc)Exponents and Logarithms.
* log: (libc)Exponents and Logarithms.
* logb: (libc)Exponents and Logarithms.
* logbf: (libc)Exponents and Logarithms.
* logbl: (libc)Exponents and Logarithms.
* logf: (libc)Exponents and Logarithms.
* login: (libc)Logging In and Out.
* login_tty: (libc)Logging In and Out.
* logl: (libc)Exponents and Logarithms.
* logout: (libc)Logging In and Out.
* logwtmp: (libc)Logging In and Out.
* longjmp: (libc)Non-Local Details.
* lrand48: (libc)SVID Random.
* lrand48_r: (libc)SVID Random.
* lrint: (libc)Rounding Functions.
* lrintf: (libc)Rounding Functions.
* lrintl: (libc)Rounding Functions.
* lround: (libc)Rounding Functions.
* lroundf: (libc)Rounding Functions.
* lroundl: (libc)Rounding Functions.
* lsearch: (libc)Array Search Function.
* lseek64: (libc)File Position Primitive.
* lseek: (libc)File Position Primitive.
* lstat64: (libc)Reading Attributes.
* lstat: (libc)Reading Attributes.
* lutimes: (libc)File Times.
* madvise: (libc)Memory-mapped I/O.
* makecontext: (libc)System V contexts.
* mallinfo: (libc)Statistics of Malloc.
* malloc: (libc)Basic Allocation.
* mallopt: (libc)Malloc Tunable Parameters.
* mblen: (libc)Non-reentrant Character Conversion.
* mbrlen: (libc)Converting a Character.
* mbrtowc: (libc)Converting a Character.
* mbsinit: (libc)Keeping the state.
* mbsnrtowcs: (libc)Converting Strings.
* mbsrtowcs: (libc)Converting Strings.
* mbstowcs: (libc)Non-reentrant String Conversion.
* mbtowc: (libc)Non-reentrant Character Conversion.
* mcheck: (libc)Heap Consistency Checking.
* memalign: (libc)Aligned Memory Blocks.
* memccpy: (libc)Copying Strings and Arrays.
* memchr: (libc)Search Functions.
* memcmp: (libc)String/Array Comparison.
* memcpy: (libc)Copying Strings and Arrays.
* memfrob: (libc)Trivial Encryption.
* memmem: (libc)Search Functions.
* memmove: (libc)Copying Strings and Arrays.
* mempcpy: (libc)Copying Strings and Arrays.
* memrchr: (libc)Search Functions.
* memset: (libc)Copying Strings and Arrays.
* mkdir: (libc)Creating Directories.
* mkdtemp: (libc)Temporary Files.
* mkfifo: (libc)FIFO Special Files.
* mknod: (libc)Making Special Files.
* mkstemp: (libc)Temporary Files.
* mktemp: (libc)Temporary Files.
* mktime: (libc)Broken-down Time.
* mlock: (libc)Page Lock Functions.
* mlockall: (libc)Page Lock Functions.
* mmap64: (libc)Memory-mapped I/O.
* mmap: (libc)Memory-mapped I/O.
* modf: (libc)Rounding Functions.
* modff: (libc)Rounding Functions.
* modfl: (libc)Rounding Functions.
* mount: (libc)Mount-Unmount-Remount.
* mprobe: (libc)Heap Consistency Checking.
* mrand48: (libc)SVID Random.
* mrand48_r: (libc)SVID Random.
* mremap: (libc)Memory-mapped I/O.
* msync: (libc)Memory-mapped I/O.
* mtrace: (libc)Tracing malloc.
* munlock: (libc)Page Lock Functions.
* munlockall: (libc)Page Lock Functions.
* munmap: (libc)Memory-mapped I/O.
* muntrace: (libc)Tracing malloc.
* nan: (libc)FP Bit Twiddling.
* nanf: (libc)FP Bit Twiddling.
* nanl: (libc)FP Bit Twiddling.
* nanosleep: (libc)Sleeping.
* nearbyint: (libc)Rounding Functions.
* nearbyintf: (libc)Rounding Functions.
* nearbyintl: (libc)Rounding Functions.
* nextafter: (libc)FP Bit Twiddling.
* nextafterf: (libc)FP Bit Twiddling.
* nextafterl: (libc)FP Bit Twiddling.
* nexttoward: (libc)FP Bit Twiddling.
* nexttowardf: (libc)FP Bit Twiddling.
* nexttowardl: (libc)FP Bit Twiddling.
* nftw64: (libc)Working with Directory Trees.
* nftw: (libc)Working with Directory Trees.
* ngettext: (libc)Advanced gettext functions.
* nice: (libc)Traditional Scheduling Functions.
* nl_langinfo: (libc)The Elegant and Fast Way.
* nrand48: (libc)SVID Random.
* nrand48_r: (libc)SVID Random.
* ntohl: (libc)Byte Order.
* ntohs: (libc)Byte Order.
* ntp_adjtime: (libc)High Accuracy Clock.
* ntp_gettime: (libc)High Accuracy Clock.
* obstack_1grow: (libc)Growing Objects.
* obstack_1grow_fast: (libc)Extra Fast Growing.
* obstack_alignment_mask: (libc)Obstacks Data Alignment.
* obstack_alloc: (libc)Allocation in an Obstack.
* obstack_base: (libc)Status of an Obstack.
* obstack_blank: (libc)Growing Objects.
* obstack_blank_fast: (libc)Extra Fast Growing.
* obstack_chunk_size: (libc)Obstack Chunks.
* obstack_copy0: (libc)Allocation in an Obstack.
* obstack_copy: (libc)Allocation in an Obstack.
* obstack_finish: (libc)Growing Objects.
* obstack_free: (libc)Freeing Obstack Objects.
* obstack_grow0: (libc)Growing Objects.
* obstack_grow: (libc)Growing Objects.
* obstack_init: (libc)Preparing for Obstacks.
* obstack_int_grow: (libc)Growing Objects.
* obstack_int_grow_fast: (libc)Extra Fast Growing.
* obstack_next_free: (libc)Status of an Obstack.
* obstack_object_size: (libc)Growing Objects.
* obstack_object_size: (libc)Status of an Obstack.
* obstack_printf: (libc)Dynamic Output.
* obstack_ptr_grow: (libc)Growing Objects.
* obstack_ptr_grow_fast: (libc)Extra Fast Growing.
* obstack_room: (libc)Extra Fast Growing.
* obstack_vprintf: (libc)Variable Arguments Output.
* offsetof: (libc)Structure Measurement.
* on_exit: (libc)Cleanups on Exit.
* open64: (libc)Opening and Closing Files.
* open: (libc)Opening and Closing Files.
* open_memstream: (libc)String Streams.
* opendir: (libc)Opening a Directory.
* openlog: (libc)openlog.
* openpty: (libc)Pseudo-Terminal Pairs.
* parse_printf_format: (libc)Parsing a Template String.
* pathconf: (libc)Pathconf.
* pause: (libc)Using Pause.
* pclose: (libc)Pipe to a Subprocess.
* perror: (libc)Error Messages.
* pipe: (libc)Creating a Pipe.
* popen: (libc)Pipe to a Subprocess.
* posix_fallocate64: (libc)Storage Allocation.
* posix_fallocate: (libc)Storage Allocation.
* posix_memalign: (libc)Aligned Memory Blocks.
* pow10: (libc)Exponents and Logarithms.
* pow10f: (libc)Exponents and Logarithms.
* pow10l: (libc)Exponents and Logarithms.
* pow: (libc)Exponents and Logarithms.
* powf: (libc)Exponents and Logarithms.
* powl: (libc)Exponents and Logarithms.
* pread64: (libc)I/O Primitives.
* pread: (libc)I/O Primitives.
* printf: (libc)Formatted Output Functions.
* printf_size: (libc)Predefined Printf Handlers.
* printf_size_info: (libc)Predefined Printf Handlers.
* psignal: (libc)Signal Messages.
* pthread_getattr_default_np: (libc)Default Thread Attributes.
* pthread_getspecific: (libc)Thread-specific Data.
* pthread_key_create: (libc)Thread-specific Data.
* pthread_key_delete: (libc)Thread-specific Data.
* pthread_setattr_default_np: (libc)Default Thread Attributes.
* pthread_setspecific: (libc)Thread-specific Data.
* ptsname: (libc)Allocation.
* ptsname_r: (libc)Allocation.
* putc: (libc)Simple Output.
* putc_unlocked: (libc)Simple Output.
* putchar: (libc)Simple Output.
* putchar_unlocked: (libc)Simple Output.
* putenv: (libc)Environment Access.
* putpwent: (libc)Writing a User Entry.
* puts: (libc)Simple Output.
* pututline: (libc)Manipulating the Database.
* pututxline: (libc)XPG Functions.
* putw: (libc)Simple Output.
* putwc: (libc)Simple Output.
* putwc_unlocked: (libc)Simple Output.
* putwchar: (libc)Simple Output.
* putwchar_unlocked: (libc)Simple Output.
* pwrite64: (libc)I/O Primitives.
* pwrite: (libc)I/O Primitives.
* qecvt: (libc)System V Number Conversion.
* qecvt_r: (libc)System V Number Conversion.
* qfcvt: (libc)System V Number Conversion.
* qfcvt_r: (libc)System V Number Conversion.
* qgcvt: (libc)System V Number Conversion.
* qsort: (libc)Array Sort Function.
* raise: (libc)Signaling Yourself.
* rand: (libc)ISO Random.
* rand_r: (libc)ISO Random.
* random: (libc)BSD Random.
* random_r: (libc)BSD Random.
* rawmemchr: (libc)Search Functions.
* read: (libc)I/O Primitives.
* readdir64: (libc)Reading/Closing Directory.
* readdir64_r: (libc)Reading/Closing Directory.
* readdir: (libc)Reading/Closing Directory.
* readdir_r: (libc)Reading/Closing Directory.
* readlink: (libc)Symbolic Links.
* readv: (libc)Scatter-Gather.
* realloc: (libc)Changing Block Size.
* realpath: (libc)Symbolic Links.
* recv: (libc)Receiving Data.
* recvfrom: (libc)Receiving Datagrams.
* recvmsg: (libc)Receiving Datagrams.
* regcomp: (libc)POSIX Regexp Compilation.
* regerror: (libc)Regexp Cleanup.
* regexec: (libc)Matching POSIX Regexps.
* regfree: (libc)Regexp Cleanup.
* register_printf_function: (libc)Registering New Conversions.
* remainder: (libc)Remainder Functions.
* remainderf: (libc)Remainder Functions.
* remainderl: (libc)Remainder Functions.
* remove: (libc)Deleting Files.
* rename: (libc)Renaming Files.
* rewind: (libc)File Positioning.
* rewinddir: (libc)Random Access Directory.
* rindex: (libc)Search Functions.
* rint: (libc)Rounding Functions.
* rintf: (libc)Rounding Functions.
* rintl: (libc)Rounding Functions.
* rmdir: (libc)Deleting Files.
* round: (libc)Rounding Functions.
* roundf: (libc)Rounding Functions.
* roundl: (libc)Rounding Functions.
* rpmatch: (libc)Yes-or-No Questions.
* sbrk: (libc)Resizing the Data Segment.
* scalb: (libc)Normalization Functions.
* scalbf: (libc)Normalization Functions.
* scalbl: (libc)Normalization Functions.
* scalbln: (libc)Normalization Functions.
* scalblnf: (libc)Normalization Functions.
* scalblnl: (libc)Normalization Functions.
* scalbn: (libc)Normalization Functions.
* scalbnf: (libc)Normalization Functions.
* scalbnl: (libc)Normalization Functions.
* scandir64: (libc)Scanning Directory Content.
* scandir: (libc)Scanning Directory Content.
* scanf: (libc)Formatted Input Functions.
* sched_get_priority_max: (libc)Basic Scheduling Functions.
* sched_get_priority_min: (libc)Basic Scheduling Functions.
* sched_getaffinity: (libc)CPU Affinity.
* sched_getparam: (libc)Basic Scheduling Functions.
* sched_getscheduler: (libc)Basic Scheduling Functions.
* sched_rr_get_interval: (libc)Basic Scheduling Functions.
* sched_setaffinity: (libc)CPU Affinity.
* sched_setparam: (libc)Basic Scheduling Functions.
* sched_setscheduler: (libc)Basic Scheduling Functions.
* sched_yield: (libc)Basic Scheduling Functions.
* secure_getenv: (libc)Environment Access.
* seed48: (libc)SVID Random.
* seed48_r: (libc)SVID Random.
* seekdir: (libc)Random Access Directory.
* select: (libc)Waiting for I/O.
* sem_close: (libc)Semaphores.
* sem_destroy: (libc)Semaphores.
* sem_getvalue: (libc)Semaphores.
* sem_init: (libc)Semaphores.
* sem_open: (libc)Semaphores.
* sem_post: (libc)Semaphores.
* sem_timedwait: (libc)Semaphores.
* sem_trywait: (libc)Semaphores.
* sem_unlink: (libc)Semaphores.
* sem_wait: (libc)Semaphores.
* semctl: (libc)Semaphores.
* semget: (libc)Semaphores.
* semop: (libc)Semaphores.
* semtimedop: (libc)Semaphores.
* send: (libc)Sending Data.
* sendmsg: (libc)Receiving Datagrams.
* sendto: (libc)Sending Datagrams.
* setbuf: (libc)Controlling Buffering.
* setbuffer: (libc)Controlling Buffering.
* setcontext: (libc)System V contexts.
* setdomainname: (libc)Host Identification.
* setegid: (libc)Setting Groups.
* setenv: (libc)Environment Access.
* seteuid: (libc)Setting User ID.
* setfsent: (libc)fstab.
* setgid: (libc)Setting Groups.
* setgrent: (libc)Scanning All Groups.
* setgroups: (libc)Setting Groups.
* sethostent: (libc)Host Names.
* sethostid: (libc)Host Identification.
* sethostname: (libc)Host Identification.
* setitimer: (libc)Setting an Alarm.
* setjmp: (libc)Non-Local Details.
* setkey: (libc)DES Encryption.
* setkey_r: (libc)DES Encryption.
* setlinebuf: (libc)Controlling Buffering.
* setlocale: (libc)Setting the Locale.
* setlogmask: (libc)setlogmask.
* setmntent: (libc)mtab.
* setnetent: (libc)Networks Database.
* setnetgrent: (libc)Lookup Netgroup.
* setpgid: (libc)Process Group Functions.
* setpgrp: (libc)Process Group Functions.
* setpriority: (libc)Traditional Scheduling Functions.
* setprotoent: (libc)Protocols Database.
* setpwent: (libc)Scanning All Users.
* setregid: (libc)Setting Groups.
* setreuid: (libc)Setting User ID.
* setrlimit64: (libc)Limits on Resources.
* setrlimit: (libc)Limits on Resources.
* setservent: (libc)Services Database.
* setsid: (libc)Process Group Functions.
* setsockopt: (libc)Socket Option Functions.
* setstate: (libc)BSD Random.
* setstate_r: (libc)BSD Random.
* settimeofday: (libc)High-Resolution Calendar.
* setuid: (libc)Setting User ID.
* setutent: (libc)Manipulating the Database.
* setutxent: (libc)XPG Functions.
* setvbuf: (libc)Controlling Buffering.
* shm_open: (libc)Memory-mapped I/O.
* shm_unlink: (libc)Memory-mapped I/O.
* shutdown: (libc)Closing a Socket.
* sigaction: (libc)Advanced Signal Handling.
* sigaddset: (libc)Signal Sets.
* sigaltstack: (libc)Signal Stack.
* sigblock: (libc)BSD Signal Handling.
* sigdelset: (libc)Signal Sets.
* sigemptyset: (libc)Signal Sets.
* sigfillset: (libc)Signal Sets.
* siginterrupt: (libc)BSD Signal Handling.
* sigismember: (libc)Signal Sets.
* siglongjmp: (libc)Non-Local Exits and Signals.
* sigmask: (libc)BSD Signal Handling.
* signal: (libc)Basic Signal Handling.
* signbit: (libc)FP Bit Twiddling.
* significand: (libc)Normalization Functions.
* significandf: (libc)Normalization Functions.
* significandl: (libc)Normalization Functions.
* sigpause: (libc)BSD Signal Handling.
* sigpending: (libc)Checking for Pending Signals.
* sigprocmask: (libc)Process Signal Mask.
* sigsetjmp: (libc)Non-Local Exits and Signals.
* sigsetmask: (libc)BSD Signal Handling.
* sigstack: (libc)Signal Stack.
* sigsuspend: (libc)Sigsuspend.
* sin: (libc)Trig Functions.
* sincos: (libc)Trig Functions.
* sincosf: (libc)Trig Functions.
* sincosl: (libc)Trig Functions.
* sinf: (libc)Trig Functions.
* sinh: (libc)Hyperbolic Functions.
* sinhf: (libc)Hyperbolic Functions.
* sinhl: (libc)Hyperbolic Functions.
* sinl: (libc)Trig Functions.
* sleep: (libc)Sleeping.
* snprintf: (libc)Formatted Output Functions.
* socket: (libc)Creating a Socket.
* socketpair: (libc)Socket Pairs.
* sprintf: (libc)Formatted Output Functions.
* sqrt: (libc)Exponents and Logarithms.
* sqrtf: (libc)Exponents and Logarithms.
* sqrtl: (libc)Exponents and Logarithms.
* srand48: (libc)SVID Random.
* srand48_r: (libc)SVID Random.
* srand: (libc)ISO Random.
* srandom: (libc)BSD Random.
* srandom_r: (libc)BSD Random.
* sscanf: (libc)Formatted Input Functions.
* ssignal: (libc)Basic Signal Handling.
* stat64: (libc)Reading Attributes.
* stat: (libc)Reading Attributes.
* stime: (libc)Simple Calendar Time.
* stpcpy: (libc)Copying Strings and Arrays.
* stpncpy: (libc)Truncating Strings.
* strcasecmp: (libc)String/Array Comparison.
* strcasestr: (libc)Search Functions.
* strcat: (libc)Concatenating Strings.
* strchr: (libc)Search Functions.
* strchrnul: (libc)Search Functions.
* strcmp: (libc)String/Array Comparison.
* strcoll: (libc)Collation Functions.
* strcpy: (libc)Copying Strings and Arrays.
* strcspn: (libc)Search Functions.
* strdup: (libc)Copying Strings and Arrays.
* strdupa: (libc)Copying Strings and Arrays.
* strerror: (libc)Error Messages.
* strerror_r: (libc)Error Messages.
* strfmon: (libc)Formatting Numbers.
* strfry: (libc)strfry.
* strftime: (libc)Formatting Calendar Time.
* strlen: (libc)String Length.
* strncasecmp: (libc)String/Array Comparison.
* strncat: (libc)Truncating Strings.
* strncmp: (libc)String/Array Comparison.
* strncpy: (libc)Truncating Strings.
* strndup: (libc)Truncating Strings.
* strndupa: (libc)Truncating Strings.
* strnlen: (libc)String Length.
* strpbrk: (libc)Search Functions.
* strptime: (libc)Low-Level Time String Parsing.
* strrchr: (libc)Search Functions.
* strsep: (libc)Finding Tokens in a String.
* strsignal: (libc)Signal Messages.
* strspn: (libc)Search Functions.
* strstr: (libc)Search Functions.
* strtod: (libc)Parsing of Floats.
* strtof: (libc)Parsing of Floats.
* strtoimax: (libc)Parsing of Integers.
* strtok: (libc)Finding Tokens in a String.
* strtok_r: (libc)Finding Tokens in a String.
* strtol: (libc)Parsing of Integers.
* strtold: (libc)Parsing of Floats.
* strtoll: (libc)Parsing of Integers.
* strtoq: (libc)Parsing of Integers.
* strtoul: (libc)Parsing of Integers.
* strtoull: (libc)Parsing of Integers.
* strtoumax: (libc)Parsing of Integers.
* strtouq: (libc)Parsing of Integers.
* strverscmp: (libc)String/Array Comparison.
* strxfrm: (libc)Collation Functions.
* stty: (libc)BSD Terminal Modes.
* swapcontext: (libc)System V contexts.
* swprintf: (libc)Formatted Output Functions.
* swscanf: (libc)Formatted Input Functions.
* symlink: (libc)Symbolic Links.
* sync: (libc)Synchronizing I/O.
* syscall: (libc)System Calls.
* sysconf: (libc)Sysconf Definition.
* sysctl: (libc)System Parameters.
* syslog: (libc)syslog; vsyslog.
* system: (libc)Running a Command.
* sysv_signal: (libc)Basic Signal Handling.
* tan: (libc)Trig Functions.
* tanf: (libc)Trig Functions.
* tanh: (libc)Hyperbolic Functions.
* tanhf: (libc)Hyperbolic Functions.
* tanhl: (libc)Hyperbolic Functions.
* tanl: (libc)Trig Functions.
* tcdrain: (libc)Line Control.
* tcflow: (libc)Line Control.
* tcflush: (libc)Line Control.
* tcgetattr: (libc)Mode Functions.
* tcgetpgrp: (libc)Terminal Access Functions.
* tcgetsid: (libc)Terminal Access Functions.
* tcsendbreak: (libc)Line Control.
* tcsetattr: (libc)Mode Functions.
* tcsetpgrp: (libc)Terminal Access Functions.
* tdelete: (libc)Tree Search Function.
* tdestroy: (libc)Tree Search Function.
* telldir: (libc)Random Access Directory.
* tempnam: (libc)Temporary Files.
* textdomain: (libc)Locating gettext catalog.
* tfind: (libc)Tree Search Function.
* tgamma: (libc)Special Functions.
* tgammaf: (libc)Special Functions.
* tgammal: (libc)Special Functions.
* time: (libc)Simple Calendar Time.
* timegm: (libc)Broken-down Time.
* timelocal: (libc)Broken-down Time.
* times: (libc)Processor Time.
* tmpfile64: (libc)Temporary Files.
* tmpfile: (libc)Temporary Files.
* tmpnam: (libc)Temporary Files.
* tmpnam_r: (libc)Temporary Files.
* toascii: (libc)Case Conversion.
* tolower: (libc)Case Conversion.
* toupper: (libc)Case Conversion.
* towctrans: (libc)Wide Character Case Conversion.
* towlower: (libc)Wide Character Case Conversion.
* towupper: (libc)Wide Character Case Conversion.
* trunc: (libc)Rounding Functions.
* truncate64: (libc)File Size.
* truncate: (libc)File Size.
* truncf: (libc)Rounding Functions.
* truncl: (libc)Rounding Functions.
* tsearch: (libc)Tree Search Function.
* ttyname: (libc)Is It a Terminal.
* ttyname_r: (libc)Is It a Terminal.
* twalk: (libc)Tree Search Function.
* tzset: (libc)Time Zone Functions.
* ulimit: (libc)Limits on Resources.
* umask: (libc)Setting Permissions.
* umount2: (libc)Mount-Unmount-Remount.
* umount: (libc)Mount-Unmount-Remount.
* uname: (libc)Platform Type.
* ungetc: (libc)How Unread.
* ungetwc: (libc)How Unread.
* unlink: (libc)Deleting Files.
* unlockpt: (libc)Allocation.
* unsetenv: (libc)Environment Access.
* updwtmp: (libc)Manipulating the Database.
* utime: (libc)File Times.
* utimes: (libc)File Times.
* utmpname: (libc)Manipulating the Database.
* utmpxname: (libc)XPG Functions.
* va_arg: (libc)Argument Macros.
* va_copy: (libc)Argument Macros.
* va_end: (libc)Argument Macros.
* va_start: (libc)Argument Macros.
* valloc: (libc)Aligned Memory Blocks.
* vasprintf: (libc)Variable Arguments Output.
* verr: (libc)Error Messages.
* verrx: (libc)Error Messages.
* versionsort64: (libc)Scanning Directory Content.
* versionsort: (libc)Scanning Directory Content.
* vfork: (libc)Creating a Process.
* vfprintf: (libc)Variable Arguments Output.
* vfscanf: (libc)Variable Arguments Input.
* vfwprintf: (libc)Variable Arguments Output.
* vfwscanf: (libc)Variable Arguments Input.
* vlimit: (libc)Limits on Resources.
* vprintf: (libc)Variable Arguments Output.
* vscanf: (libc)Variable Arguments Input.
* vsnprintf: (libc)Variable Arguments Output.
* vsprintf: (libc)Variable Arguments Output.
* vsscanf: (libc)Variable Arguments Input.
* vswprintf: (libc)Variable Arguments Output.
* vswscanf: (libc)Variable Arguments Input.
* vsyslog: (libc)syslog; vsyslog.
* vtimes: (libc)Resource Usage.
* vwarn: (libc)Error Messages.
* vwarnx: (libc)Error Messages.
* vwprintf: (libc)Variable Arguments Output.
* vwscanf: (libc)Variable Arguments Input.
* wait3: (libc)BSD Wait Functions.
* wait4: (libc)Process Completion.
* wait: (libc)Process Completion.
* waitpid: (libc)Process Completion.
* warn: (libc)Error Messages.
* warnx: (libc)Error Messages.
* wcpcpy: (libc)Copying Strings and Arrays.
* wcpncpy: (libc)Truncating Strings.
* wcrtomb: (libc)Converting a Character.
* wcscasecmp: (libc)String/Array Comparison.
* wcscat: (libc)Concatenating Strings.
* wcschr: (libc)Search Functions.
* wcschrnul: (libc)Search Functions.
* wcscmp: (libc)String/Array Comparison.
* wcscoll: (libc)Collation Functions.
* wcscpy: (libc)Copying Strings and Arrays.
* wcscspn: (libc)Search Functions.
* wcsdup: (libc)Copying Strings and Arrays.
* wcsftime: (libc)Formatting Calendar Time.
* wcslen: (libc)String Length.
* wcsncasecmp: (libc)String/Array Comparison.
* wcsncat: (libc)Truncating Strings.
* wcsncmp: (libc)String/Array Comparison.
* wcsncpy: (libc)Truncating Strings.
* wcsnlen: (libc)String Length.
* wcsnrtombs: (libc)Converting Strings.
* wcspbrk: (libc)Search Functions.
* wcsrchr: (libc)Search Functions.
* wcsrtombs: (libc)Converting Strings.
* wcsspn: (libc)Search Functions.
* wcsstr: (libc)Search Functions.
* wcstod: (libc)Parsing of Floats.
* wcstof: (libc)Parsing of Floats.
* wcstoimax: (libc)Parsing of Integers.
* wcstok: (libc)Finding Tokens in a String.
* wcstol: (libc)Parsing of Integers.
* wcstold: (libc)Parsing of Floats.
* wcstoll: (libc)Parsing of Integers.
* wcstombs: (libc)Non-reentrant String Conversion.
* wcstoq: (libc)Parsing of Integers.
* wcstoul: (libc)Parsing of Integers.
* wcstoull: (libc)Parsing of Integers.
* wcstoumax: (libc)Parsing of Integers.
* wcstouq: (libc)Parsing of Integers.
* wcswcs: (libc)Search Functions.
* wcsxfrm: (libc)Collation Functions.
* wctob: (libc)Converting a Character.
* wctomb: (libc)Non-reentrant Character Conversion.
* wctrans: (libc)Wide Character Case Conversion.
* wctype: (libc)Classification of Wide Characters.
* wmemchr: (libc)Search Functions.
* wmemcmp: (libc)String/Array Comparison.
* wmemcpy: (libc)Copying Strings and Arrays.
* wmemmove: (libc)Copying Strings and Arrays.
* wmempcpy: (libc)Copying Strings and Arrays.
* wmemset: (libc)Copying Strings and Arrays.
* wordexp: (libc)Calling Wordexp.
* wordfree: (libc)Calling Wordexp.
* wprintf: (libc)Formatted Output Functions.
* write: (libc)I/O Primitives.
* writev: (libc)Scatter-Gather.
* wscanf: (libc)Formatted Input Functions.
* y0: (libc)Special Functions.
* y0f: (libc)Special Functions.
* y0l: (libc)Special Functions.
* y1: (libc)Special Functions.
* y1f: (libc)Special Functions.
* y1l: (libc)Special Functions.
* yn: (libc)Special Functions.
* ynf: (libc)Special Functions.
* ynl: (libc)Special Functions.
END-INFO-DIR-ENTRY


File: libc.info,  Node: Numeric Input Conversions,  Next: String Input Conversions,  Prev: Table of Input Conversions,  Up: Formatted Input

12.14.4 Numeric Input Conversions
---------------------------------

This section describes the ‘scanf’ conversions for reading numeric
values.

   The ‘%d’ conversion matches an optionally signed integer in decimal
radix.  The syntax that is recognized is the same as that for the
‘strtol’ function (*note Parsing of Integers::) with the value ‘10’ for
the BASE argument.

   The ‘%i’ conversion matches an optionally signed integer in any of
the formats that the C language defines for specifying an integer
constant.  The syntax that is recognized is the same as that for the
‘strtol’ function (*note Parsing of Integers::) with the value ‘0’ for
the BASE argument.  (You can print integers in this syntax with ‘printf’
by using the ‘#’ flag character with the ‘%x’, ‘%o’, or ‘%d’ conversion.
*Note Integer Conversions::.)

   For example, any of the strings ‘10’, ‘0xa’, or ‘012’ could be read
in as integers under the ‘%i’ conversion.  Each of these specifies a
number with decimal value ‘10’.

   The ‘%o’, ‘%u’, and ‘%x’ conversions match unsigned integers in
octal, decimal, and hexadecimal radices, respectively.  The syntax that
is recognized is the same as that for the ‘strtoul’ function (*note
Parsing of Integers::) with the appropriate value (‘8’, ‘10’, or ‘16’)
for the BASE argument.

   The ‘%X’ conversion is identical to the ‘%x’ conversion.  They both
permit either uppercase or lowercase letters to be used as digits.

   The default type of the corresponding argument for the ‘%d’ and ‘%i’
conversions is ‘int *’, and ‘unsigned int *’ for the other integer
conversions.  You can use the following type modifiers to specify other
sizes of integer:

‘hh’
     Specifies that the argument is a ‘signed char *’ or ‘unsigned char
     *’.

     This modifier was introduced in ISO C99.

‘h’
     Specifies that the argument is a ‘short int *’ or ‘unsigned short
     int *’.

‘j’
     Specifies that the argument is a ‘intmax_t *’ or ‘uintmax_t *’.

     This modifier was introduced in ISO C99.

‘l’
     Specifies that the argument is a ‘long int *’ or ‘unsigned long int
     *’.  Two ‘l’ characters is like the ‘L’ modifier, below.

     If used with ‘%c’ or ‘%s’ the corresponding parameter is considered
     as a pointer to a wide character or wide character string
     respectively.  This use of ‘l’ was introduced in Amendment 1 to
     ISO C90.

‘ll’
‘L’
‘q’
     Specifies that the argument is a ‘long long int *’ or ‘unsigned
     long long int *’.  (The ‘long long’ type is an extension supported
     by the GNU C compiler.  For systems that don’t provide extra-long
     integers, this is the same as ‘long int’.)

     The ‘q’ modifier is another name for the same thing, which comes
     from 4.4 BSD; a ‘long long int’ is sometimes called a “quad” ‘int’.

‘t’
     Specifies that the argument is a ‘ptrdiff_t *’.

     This modifier was introduced in ISO C99.

‘z’
     Specifies that the argument is a ‘size_t *’.

     This modifier was introduced in ISO C99.

   All of the ‘%e’, ‘%f’, ‘%g’, ‘%E’, and ‘%G’ input conversions are
interchangeable.  They all match an optionally signed floating point
number, in the same syntax as for the ‘strtod’ function (*note Parsing
of Floats::).

   For the floating-point input conversions, the default argument type
is ‘float *’.  (This is different from the corresponding output
conversions, where the default type is ‘double’; remember that ‘float’
arguments to ‘printf’ are converted to ‘double’ by the default argument
promotions, but ‘float *’ arguments are not promoted to ‘double *’.)
You can specify other sizes of float using these type modifiers:

‘l’
     Specifies that the argument is of type ‘double *’.

‘L’
     Specifies that the argument is of type ‘long double *’.

   For all the above number parsing formats there is an additional
optional flag ‘'’.  When this flag is given the ‘scanf’ function expects
the number represented in the input string to be formatted according to
the grouping rules of the currently selected locale (*note General
Numeric::).

   If the ‘"C"’ or ‘"POSIX"’ locale is selected there is no difference.
But for a locale which specifies values for the appropriate fields in
the locale the input must have the correct form in the input.  Otherwise
the longest prefix with a correct form is processed.


File: libc.info,  Node: String Input Conversions,  Next: Dynamic String Input,  Prev: Numeric Input Conversions,  Up: Formatted Input

12.14.5 String Input Conversions
--------------------------------

This section describes the ‘scanf’ input conversions for reading string
and character values: ‘%s’, ‘%S’, ‘%[’, ‘%c’, and ‘%C’.

   You have two options for how to receive the input from these
conversions:

   • Provide a buffer to store it in.  This is the default.  You should
     provide an argument of type ‘char *’ or ‘wchar_t *’ (the latter of
     the ‘l’ modifier is present).

     *Warning:* To make a robust program, you must make sure that the
     input (plus its terminating null) cannot possibly exceed the size
     of the buffer you provide.  In general, the only way to do this is
     to specify a maximum field width one less than the buffer size.
     *If you provide the buffer, always specify a maximum field width to
     prevent overflow.*

   • Ask ‘scanf’ to allocate a big enough buffer, by specifying the ‘a’
     flag character.  This is a GNU extension.  You should provide an
     argument of type ‘char **’ for the buffer address to be stored in.
     *Note Dynamic String Input::.

   The ‘%c’ conversion is the simplest: it matches a fixed number of
characters, always.  The maximum field width says how many characters to
read; if you don’t specify the maximum, the default is 1.  This
conversion doesn’t append a null character to the end of the text it
reads.  It also does not skip over initial whitespace characters.  It
reads precisely the next N characters, and fails if it cannot get that
many.  Since there is always a maximum field width with ‘%c’ (whether
specified, or 1 by default), you can always prevent overflow by making
the buffer long enough.

   If the format is ‘%lc’ or ‘%C’ the function stores wide characters
which are converted using the conversion determined at the time the
stream was opened from the external byte stream.  The number of bytes
read from the medium is limited by ‘MB_CUR_LEN * N’ but at most N wide
character get stored in the output string.

   The ‘%s’ conversion matches a string of non-whitespace characters.
It skips and discards initial whitespace, but stops when it encounters
more whitespace after having read something.  It stores a null character
at the end of the text that it reads.

   For example, reading the input:

      hello, world

with the conversion ‘%10c’ produces ‘" hello, wo"’, but reading the same
input with the conversion ‘%10s’ produces ‘"hello,"’.

   *Warning:* If you do not specify a field width for ‘%s’, then the
number of characters read is limited only by where the next whitespace
character appears.  This almost certainly means that invalid input can
make your program crash—which is a bug.

   The ‘%ls’ and ‘%S’ format are handled just like ‘%s’ except that the
external byte sequence is converted using the conversion associated with
the stream to wide characters with their own encoding.  A width or
precision specified with the format do not directly determine how many
bytes are read from the stream since they measure wide characters.  But
an upper limit can be computed by multiplying the value of the width or
precision by ‘MB_CUR_MAX’.

   To read in characters that belong to an arbitrary set of your choice,
use the ‘%[’ conversion.  You specify the set between the ‘[’ character
and a following ‘]’ character, using the same syntax used in regular
expressions for explicit sets of characters.  As special cases:

   • A literal ‘]’ character can be specified as the first character of
     the set.

   • An embedded ‘-’ character (that is, one that is not the first or
     last character of the set) is used to specify a range of
     characters.

   • If a caret character ‘^’ immediately follows the initial ‘[’, then
     the set of allowed input characters is the everything _except_ the
     characters listed.

   The ‘%[’ conversion does not skip over initial whitespace characters.

   Note that the "character class" syntax available in character sets
that appear inside regular expressions (such as ‘[:alpha:]’) is _not_
available in the ‘%[’ conversion.

   Here are some examples of ‘%[’ conversions and what they mean:

‘%25[1234567890]’
     Matches a string of up to 25 digits.

‘%25[][]’
     Matches a string of up to 25 square brackets.

‘%25[^ \f\n\r\t\v]’
     Matches a string up to 25 characters long that doesn’t contain any
     of the standard whitespace characters.  This is slightly different
     from ‘%s’, because if the input begins with a whitespace character,
     ‘%[’ reports a matching failure while ‘%s’ simply discards the
     initial whitespace.

‘%25[a-z]’
     Matches up to 25 lowercase characters.

   As for ‘%c’ and ‘%s’ the ‘%[’ format is also modified to produce wide
characters if the ‘l’ modifier is present.  All what is said about ‘%ls’
above is true for ‘%l[’.

   One more reminder: the ‘%s’ and ‘%[’ conversions are *dangerous* if
you don’t specify a maximum width or use the ‘a’ flag, because input too
long would overflow whatever buffer you have provided for it.  No matter
how long your buffer is, a user could supply input that is longer.  A
well-written program reports invalid input with a comprehensible error
message, not with a crash.


File: libc.info,  Node: Dynamic String Input,  Next: Other Input Conversions,  Prev: String Input Conversions,  Up: Formatted Input

12.14.6 Dynamically Allocating String Conversions
-------------------------------------------------

A GNU extension to formatted input lets you safely read a string with no
maximum size.  Using this feature, you don’t supply a buffer; instead,
‘scanf’ allocates a buffer big enough to hold the data and gives you its
address.  To use this feature, write ‘a’ as a flag character, as in
‘%as’ or ‘%a[0-9a-z]’.

   The pointer argument you supply for where to store the input should
have type ‘char **’.  The ‘scanf’ function allocates a buffer and stores
its address in the word that the argument points to.  You should free
the buffer with ‘free’ when you no longer need it.

   Here is an example of using the ‘a’ flag with the ‘%[…]’ conversion
specification to read a “variable assignment” of the form ‘VARIABLE =
VALUE’.

     {
       char *variable, *value;

       if (2 > scanf ("%a[a-zA-Z0-9] = %a[^\n]\n",
     		 &variable, &value))
         {
           invalid_input_error ();
           return 0;
         }

       …
     }


File: libc.info,  Node: Other Input Conversions,  Next: Formatted Input Functions,  Prev: Dynamic String Input,  Up: Formatted Input

12.14.7 Other Input Conversions
-------------------------------

This section describes the miscellaneous input conversions.

   The ‘%p’ conversion is used to read a pointer value.  It recognizes
the same syntax used by the ‘%p’ output conversion for ‘printf’ (*note
Other Output Conversions::); that is, a hexadecimal number just as the
‘%x’ conversion accepts.  The corresponding argument should be of type
‘void **’; that is, the address of a place to store a pointer.

   The resulting pointer value is not guaranteed to be valid if it was
not originally written during the same program execution that reads it
in.

   The ‘%n’ conversion produces the number of characters read so far by
this call.  The corresponding argument should be of type ‘int *’.  This
conversion works in the same way as the ‘%n’ conversion for ‘printf’;
see *note Other Output Conversions::, for an example.

   The ‘%n’ conversion is the only mechanism for determining the success
of literal matches or conversions with suppressed assignments.  If the
‘%n’ follows the locus of a matching failure, then no value is stored
for it since ‘scanf’ returns before processing the ‘%n’.  If you store
‘-1’ in that argument slot before calling ‘scanf’, the presence of ‘-1’
after ‘scanf’ indicates an error occurred before the ‘%n’ was reached.

   Finally, the ‘%%’ conversion matches a literal ‘%’ character in the
input stream, without using an argument.  This conversion does not
permit any flags, field width, or type modifier to be specified.


File: libc.info,  Node: Formatted Input Functions,  Next: Variable Arguments Input,  Prev: Other Input Conversions,  Up: Formatted Input

12.14.8 Formatted Input Functions
---------------------------------

Here are the descriptions of the functions for performing formatted
input.  Prototypes for these functions are in the header file ‘stdio.h’.

 -- Function: int scanf (const char *TEMPLATE, …)
     Preliminary: | MT-Safe locale | AS-Unsafe corrupt heap | AC-Unsafe
     mem lock corrupt | *Note POSIX Safety Concepts::.

     The ‘scanf’ function reads formatted input from the stream ‘stdin’
     under the control of the template string TEMPLATE.  The optional
     arguments are pointers to the places which receive the resulting
     values.

     The return value is normally the number of successful assignments.
     If an end-of-file condition is detected before any matches are
     performed, including matches against whitespace and literal
     characters in the template, then ‘EOF’ is returned.

 -- Function: int wscanf (const wchar_t *TEMPLATE, …)
     Preliminary: | MT-Safe locale | AS-Unsafe corrupt heap | AC-Unsafe
     mem lock corrupt | *Note POSIX Safety Concepts::.

     The ‘wscanf’ function reads formatted input from the stream ‘stdin’
     under the control of the template string TEMPLATE.  The optional
     arguments are pointers to the places which receive the resulting
     values.

     The return value is normally the number of successful assignments.
     If an end-of-file condition is detected before any matches are
     performed, including matches against whitespace and literal
     characters in the template, then ‘WEOF’ is returned.

 -- Function: int fscanf (FILE *STREAM, const char *TEMPLATE, …)
     Preliminary: | MT-Safe locale | AS-Unsafe corrupt heap | AC-Unsafe
     mem lock corrupt | *Note POSIX Safety Concepts::.

     This function is just like ‘scanf’, except that the input is read
     from the stream STREAM instead of ‘stdin’.

 -- Function: int fwscanf (FILE *STREAM, const wchar_t *TEMPLATE, …)
     Preliminary: | MT-Safe locale | AS-Unsafe corrupt heap | AC-Unsafe
     mem lock corrupt | *Note POSIX Safety Concepts::.

     This function is just like ‘wscanf’, except that the input is read
     from the stream STREAM instead of ‘stdin’.

 -- Function: int sscanf (const char *S, const char *TEMPLATE, …)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     This is like ‘scanf’, except that the characters are taken from the
     null-terminated string S instead of from a stream.  Reaching the
     end of the string is treated as an end-of-file condition.

     The behavior of this function is undefined if copying takes place
     between objects that overlap—for example, if S is also given as an
     argument to receive a string read under control of the ‘%s’, ‘%S’,
     or ‘%[’ conversion.

 -- Function: int swscanf (const wchar_t *WS, const wchar_t *TEMPLATE,
          …)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     This is like ‘wscanf’, except that the characters are taken from
     the null-terminated string WS instead of from a stream.  Reaching
     the end of the string is treated as an end-of-file condition.

     The behavior of this function is undefined if copying takes place
     between objects that overlap—for example, if WS is also given as an
     argument to receive a string read under control of the ‘%s’, ‘%S’,
     or ‘%[’ conversion.


File: libc.info,  Node: Variable Arguments Input,  Prev: Formatted Input Functions,  Up: Formatted Input

12.14.9 Variable Arguments Input Functions
------------------------------------------

The functions ‘vscanf’ and friends are provided so that you can define
your own variadic ‘scanf’-like functions that make use of the same
internals as the built-in formatted output functions.  These functions
are analogous to the ‘vprintf’ series of output functions.  *Note
Variable Arguments Output::, for important information on how to use
them.

   *Portability Note:* The functions listed in this section were
introduced in ISO C99 and were before available as GNU extensions.

 -- Function: int vscanf (const char *TEMPLATE, va_list AP)
     Preliminary: | MT-Safe locale | AS-Unsafe corrupt heap | AC-Unsafe
     mem lock corrupt | *Note POSIX Safety Concepts::.

     This function is similar to ‘scanf’, but instead of taking a
     variable number of arguments directly, it takes an argument list
     pointer AP of type ‘va_list’ (*note Variadic Functions::).

 -- Function: int vwscanf (const wchar_t *TEMPLATE, va_list AP)
     Preliminary: | MT-Safe locale | AS-Unsafe corrupt heap | AC-Unsafe
     mem lock corrupt | *Note POSIX Safety Concepts::.

     This function is similar to ‘wscanf’, but instead of taking a
     variable number of arguments directly, it takes an argument list
     pointer AP of type ‘va_list’ (*note Variadic Functions::).

 -- Function: int vfscanf (FILE *STREAM, const char *TEMPLATE, va_list
          AP)
     Preliminary: | MT-Safe locale | AS-Unsafe corrupt heap | AC-Unsafe
     mem lock corrupt | *Note POSIX Safety Concepts::.

     This is the equivalent of ‘fscanf’ with the variable argument list
     specified directly as for ‘vscanf’.

 -- Function: int vfwscanf (FILE *STREAM, const wchar_t *TEMPLATE,
          va_list AP)
     Preliminary: | MT-Safe locale | AS-Unsafe corrupt heap | AC-Unsafe
     mem lock corrupt | *Note POSIX Safety Concepts::.

     This is the equivalent of ‘fwscanf’ with the variable argument list
     specified directly as for ‘vwscanf’.

 -- Function: int vsscanf (const char *S, const char *TEMPLATE, va_list
          AP)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     This is the equivalent of ‘sscanf’ with the variable argument list
     specified directly as for ‘vscanf’.

 -- Function: int vswscanf (const wchar_t *S, const wchar_t *TEMPLATE,
          va_list AP)
     Preliminary: | MT-Safe locale | AS-Unsafe heap | AC-Unsafe mem |
     *Note POSIX Safety Concepts::.

     This is the equivalent of ‘swscanf’ with the variable argument list
     specified directly as for ‘vwscanf’.

   In GNU C, there is a special construct you can use to let the
compiler know that a function uses a ‘scanf’-style format string.  Then
it can check the number and types of arguments in each call to the
function, and warn you when they do not match the format string.  For
details, see *note Declaring Attributes of Functions: (gcc.info)Function
Attributes.


File: libc.info,  Node: EOF and Errors,  Next: Error Recovery,  Prev: Formatted Input,  Up: I/O on Streams

12.15 End-Of-File and Errors
============================

Many of the functions described in this chapter return the value of the
macro ‘EOF’ to indicate unsuccessful completion of the operation.  Since
‘EOF’ is used to report both end of file and random errors, it’s often
better to use the ‘feof’ function to check explicitly for end of file
and ‘ferror’ to check for errors.  These functions check indicators that
are part of the internal state of the stream object, indicators set if
the appropriate condition was detected by a previous I/O operation on
that stream.

 -- Macro: int EOF
     This macro is an integer value that is returned by a number of
     narrow stream functions to indicate an end-of-file condition, or
     some other error situation.  With the GNU C Library, ‘EOF’ is ‘-1’.
     In other libraries, its value may be some other negative number.

     This symbol is declared in ‘stdio.h’.

 -- Macro: int WEOF
     This macro is an integer value that is returned by a number of wide
     stream functions to indicate an end-of-file condition, or some
     other error situation.  With the GNU C Library, ‘WEOF’ is ‘-1’.  In
     other libraries, its value may be some other negative number.

     This symbol is declared in ‘wchar.h’.

 -- Function: int feof (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Safe | AC-Unsafe lock | *Note POSIX
     Safety Concepts::.

     The ‘feof’ function returns nonzero if and only if the end-of-file
     indicator for the stream STREAM is set.

     This symbol is declared in ‘stdio.h’.

 -- Function: int feof_unlocked (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘feof_unlocked’ function is equivalent to the ‘feof’ function
     except that it does not implicitly lock the stream.

     This function is a GNU extension.

     This symbol is declared in ‘stdio.h’.

 -- Function: int ferror (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Safe | AC-Unsafe lock | *Note POSIX
     Safety Concepts::.

     The ‘ferror’ function returns nonzero if and only if the error
     indicator for the stream STREAM is set, indicating that an error
     has occurred on a previous operation on the stream.

     This symbol is declared in ‘stdio.h’.

 -- Function: int ferror_unlocked (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘ferror_unlocked’ function is equivalent to the ‘ferror’
     function except that it does not implicitly lock the stream.

     This function is a GNU extension.

     This symbol is declared in ‘stdio.h’.

   In addition to setting the error indicator associated with the
stream, the functions that operate on streams also set ‘errno’ in the
same way as the corresponding low-level functions that operate on file
descriptors.  For example, all of the functions that perform output to a
stream—such as ‘fputc’, ‘printf’, and ‘fflush’—are implemented in terms
of ‘write’, and all of the ‘errno’ error conditions defined for ‘write’
are meaningful for these functions.  For more information about the
descriptor-level I/O functions, see *note Low-Level I/O::.


File: libc.info,  Node: Error Recovery,  Next: Binary Streams,  Prev: EOF and Errors,  Up: I/O on Streams

12.16 Recovering from errors
============================

You may explicitly clear the error and EOF flags with the ‘clearerr’
function.

 -- Function: void clearerr (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Safe | AC-Unsafe lock | *Note POSIX
     Safety Concepts::.

     This function clears the end-of-file and error indicators for the
     stream STREAM.

     The file positioning functions (*note File Positioning::) also
     clear the end-of-file indicator for the stream.

 -- Function: void clearerr_unlocked (FILE *STREAM)
     Preliminary: | MT-Safe race:stream | AS-Safe | AC-Safe | *Note
     POSIX Safety Concepts::.

     The ‘clearerr_unlocked’ function is equivalent to the ‘clearerr’
     function except that it does not implicitly lock the stream.

     This function is a GNU extension.

   Note that it is _not_ correct to just clear the error flag and retry
a failed stream operation.  After a failed write, any number of
characters since the last buffer flush may have been committed to the
file, while some buffered data may have been discarded.  Merely retrying
can thus cause lost or repeated data.

   A failed read may leave the file pointer in an inappropriate position
for a second try.  In both cases, you should seek to a known position
before retrying.

   Most errors that can happen are not recoverable — a second try will
always fail again in the same way.  So usually it is best to give up and
report the error to the user, rather than install complicated recovery
logic.

   One important exception is ‘EINTR’ (*note Interrupted Primitives::).
Many stream I/O implementations will treat it as an ordinary error,
which can be quite inconvenient.  You can avoid this hassle by
installing all signals with the ‘SA_RESTART’ flag.

   For similar reasons, setting nonblocking I/O on a stream’s file
descriptor is not usually advisable.


File: libc.info,  Node: Binary Streams,  Next: File Positioning,  Prev: Error Recovery,  Up: I/O on Streams

12.17 Text and Binary Streams
=============================

GNU systems and other POSIX-compatible operating systems organize all
files as uniform sequences of characters.  However, some other systems
make a distinction between files containing text and files containing
binary data, and the input and output facilities of ISO C provide for
this distinction.  This section tells you how to write programs portable
to such systems.

   When you open a stream, you can specify either a "text stream" or a
"binary stream".  You indicate that you want a binary stream by
specifying the ‘b’ modifier in the OPENTYPE argument to ‘fopen’; see
*note Opening Streams::.  Without this option, ‘fopen’ opens the file as
a text stream.

   Text and binary streams differ in several ways:

   • The data read from a text stream is divided into "lines" which are
     terminated by newline (‘'\n'’) characters, while a binary stream is
     simply a long series of characters.  A text stream might on some
     systems fail to handle lines more than 254 characters long
     (including the terminating newline character).

   • On some systems, text files can contain only printing characters,
     horizontal tab characters, and newlines, and so text streams may
     not support other characters.  However, binary streams can handle
     any character value.

   • Space characters that are written immediately preceding a newline
     character in a text stream may disappear when the file is read in
     again.

   • More generally, there need not be a one-to-one mapping between
     characters that are read from or written to a text stream, and the
     characters in the actual file.

   Since a binary stream is always more capable and more predictable
than a text stream, you might wonder what purpose text streams serve.
Why not simply always use binary streams?  The answer is that on these
operating systems, text and binary streams use different file formats,
and the only way to read or write “an ordinary file of text” that can
work with other text-oriented programs is through a text stream.

   In the GNU C Library, and on all POSIX systems, there is no
difference between text streams and binary streams.  When you open a
stream, you get the same kind of stream regardless of whether you ask
for binary.  This stream can handle any file content, and has none of
the restrictions that text streams sometimes have.


File: libc.info,  Node: File Positioning,  Next: Portable Positioning,  Prev: Binary Streams,  Up: I/O on Streams

12.18 File Positioning
======================

The "file position" of a stream describes where in the file the stream
is currently reading or writing.  I/O on the stream advances the file
position through the file.  On GNU systems, the file position is
represented as an integer, which counts the number of bytes from the
beginning of the file.  *Note File Position::.

   During I/O to an ordinary disk file, you can change the file position
whenever you wish, so as to read or write any portion of the file.  Some
other kinds of files may also permit this.  Files which support changing
the file position are sometimes referred to as "random-access" files.

   You can use the functions in this section to examine or modify the
file position indicator associated with a stream.  The symbols listed
below are declared in the header file ‘stdio.h’.

 -- Function: long int ftell (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function returns the current file position of the stream
     STREAM.

     This function can fail if the stream doesn’t support file
     positioning, or if the file position can’t be represented in a
     ‘long int’, and possibly for other reasons as well.  If a failure
     occurs, a value of ‘-1’ is returned.

 -- Function: off_t ftello (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     The ‘ftello’ function is similar to ‘ftell’, except that it returns
     a value of type ‘off_t’.  Systems which support this type use it to
     describe all file positions, unlike the POSIX specification which
     uses a long int.  The two are not necessarily the same size.
     Therefore, using ftell can lead to problems if the implementation
     is written on top of a POSIX compliant low-level I/O
     implementation, and using ‘ftello’ is preferable whenever it is
     available.

     If this function fails it returns ‘(off_t) -1’.  This can happen
     due to missing support for file positioning or internal errors.
     Otherwise the return value is the current file position.

     The function is an extension defined in the Unix Single
     Specification version 2.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ on a
     32 bit system this function is in fact ‘ftello64’.  I.e., the LFS
     interface transparently replaces the old interface.

 -- Function: off64_t ftello64 (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function is similar to ‘ftello’ with the only difference that
     the return value is of type ‘off64_t’.  This also requires that the
     stream STREAM was opened using either ‘fopen64’, ‘freopen64’, or
     ‘tmpfile64’ since otherwise the underlying file operations to
     position the file pointer beyond the 2^31 bytes limit might fail.

     If the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ on a 32
     bits machine this function is available under the name ‘ftello’ and
     so transparently replaces the old interface.

 -- Function: int fseek (FILE *STREAM, long int OFFSET, int WHENCE)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     The ‘fseek’ function is used to change the file position of the
     stream STREAM.  The value of WHENCE must be one of the constants
     ‘SEEK_SET’, ‘SEEK_CUR’, or ‘SEEK_END’, to indicate whether the
     OFFSET is relative to the beginning of the file, the current file
     position, or the end of the file, respectively.

     This function returns a value of zero if the operation was
     successful, and a nonzero value to indicate failure.  A successful
     call also clears the end-of-file indicator of STREAM and discards
     any characters that were “pushed back” by the use of ‘ungetc’.

     ‘fseek’ either flushes any buffered output before setting the file
     position or else remembers it so it will be written later in its
     proper place in the file.

 -- Function: int fseeko (FILE *STREAM, off_t OFFSET, int WHENCE)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function is similar to ‘fseek’ but it corrects a problem with
     ‘fseek’ in a system with POSIX types.  Using a value of type ‘long
     int’ for the offset is not compatible with POSIX. ‘fseeko’ uses the
     correct type ‘off_t’ for the OFFSET parameter.

     For this reason it is a good idea to prefer ‘ftello’ whenever it is
     available since its functionality is (if different at all) closer
     the underlying definition.

     The functionality and return value is the same as for ‘fseek’.

     The function is an extension defined in the Unix Single
     Specification version 2.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ on a
     32 bit system this function is in fact ‘fseeko64’.  I.e., the LFS
     interface transparently replaces the old interface.

 -- Function: int fseeko64 (FILE *STREAM, off64_t OFFSET, int WHENCE)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function is similar to ‘fseeko’ with the only difference that
     the OFFSET parameter is of type ‘off64_t’.  This also requires that
     the stream STREAM was opened using either ‘fopen64’, ‘freopen64’,
     or ‘tmpfile64’ since otherwise the underlying file operations to
     position the file pointer beyond the 2^31 bytes limit might fail.

     If the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ on a 32
     bits machine this function is available under the name ‘fseeko’ and
     so transparently replaces the old interface.

   *Portability Note:* In non-POSIX systems, ‘ftell’, ‘ftello’, ‘fseek’
and ‘fseeko’ might work reliably only on binary streams.  *Note Binary
Streams::.

   The following symbolic constants are defined for use as the WHENCE
argument to ‘fseek’.  They are also used with the ‘lseek’ function
(*note I/O Primitives::) and to specify offsets for file locks (*note
Control Operations::).

 -- Macro: int SEEK_SET
     This is an integer constant which, when used as the WHENCE argument
     to the ‘fseek’ or ‘fseeko’ function, specifies that the offset
     provided is relative to the beginning of the file.

 -- Macro: int SEEK_CUR
     This is an integer constant which, when used as the WHENCE argument
     to the ‘fseek’ or ‘fseeko’ function, specifies that the offset
     provided is relative to the current file position.

 -- Macro: int SEEK_END
     This is an integer constant which, when used as the WHENCE argument
     to the ‘fseek’ or ‘fseeko’ function, specifies that the offset
     provided is relative to the end of the file.

 -- Function: void rewind (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     The ‘rewind’ function positions the stream STREAM at the beginning
     of the file.  It is equivalent to calling ‘fseek’ or ‘fseeko’ on
     the STREAM with an OFFSET argument of ‘0L’ and a WHENCE argument of
     ‘SEEK_SET’, except that the return value is discarded and the error
     indicator for the stream is reset.

   These three aliases for the ‘SEEK_…’ constants exist for the sake of
compatibility with older BSD systems.  They are defined in two different
header files: ‘fcntl.h’ and ‘sys/file.h’.

‘L_SET’
     An alias for ‘SEEK_SET’.

‘L_INCR’
     An alias for ‘SEEK_CUR’.

‘L_XTND’
     An alias for ‘SEEK_END’.


File: libc.info,  Node: Portable Positioning,  Next: Stream Buffering,  Prev: File Positioning,  Up: I/O on Streams

12.19 Portable File-Position Functions
======================================

On GNU systems, the file position is truly a character count.  You can
specify any character count value as an argument to ‘fseek’ or ‘fseeko’
and get reliable results for any random access file.  However, some ISO C
systems do not represent file positions in this way.

   On some systems where text streams truly differ from binary streams,
it is impossible to represent the file position of a text stream as a
count of characters from the beginning of the file.  For example, the
file position on some systems must encode both a record offset within
the file, and a character offset within the record.

   As a consequence, if you want your programs to be portable to these
systems, you must observe certain rules:

   • The value returned from ‘ftell’ on a text stream has no predictable
     relationship to the number of characters you have read so far.  The
     only thing you can rely on is that you can use it subsequently as
     the OFFSET argument to ‘fseek’ or ‘fseeko’ to move back to the same
     file position.

   • In a call to ‘fseek’ or ‘fseeko’ on a text stream, either the
     OFFSET must be zero, or WHENCE must be ‘SEEK_SET’ and the OFFSET
     must be the result of an earlier call to ‘ftell’ on the same
     stream.

   • The value of the file position indicator of a text stream is
     undefined while there are characters that have been pushed back
     with ‘ungetc’ that haven’t been read or discarded.  *Note
     Unreading::.

   But even if you observe these rules, you may still have trouble for
long files, because ‘ftell’ and ‘fseek’ use a ‘long int’ value to
represent the file position.  This type may not have room to encode all
the file positions in a large file.  Using the ‘ftello’ and ‘fseeko’
functions might help here since the ‘off_t’ type is expected to be able
to hold all file position values but this still does not help to handle
additional information which must be associated with a file position.

   So if you do want to support systems with peculiar encodings for the
file positions, it is better to use the functions ‘fgetpos’ and
‘fsetpos’ instead.  These functions represent the file position using
the data type ‘fpos_t’, whose internal representation varies from system
to system.

   These symbols are declared in the header file ‘stdio.h’.

 -- Data Type: fpos_t
     This is the type of an object that can encode information about the
     file position of a stream, for use by the functions ‘fgetpos’ and
     ‘fsetpos’.

     In the GNU C Library, ‘fpos_t’ is an opaque data structure that
     contains internal data to represent file offset and conversion
     state information.  In other systems, it might have a different
     internal representation.

     When compiling with ‘_FILE_OFFSET_BITS == 64’ on a 32 bit machine
     this type is in fact equivalent to ‘fpos64_t’ since the LFS
     interface transparently replaces the old interface.

 -- Data Type: fpos64_t
     This is the type of an object that can encode information about the
     file position of a stream, for use by the functions ‘fgetpos64’ and
     ‘fsetpos64’.

     In the GNU C Library, ‘fpos64_t’ is an opaque data structure that
     contains internal data to represent file offset and conversion
     state information.  In other systems, it might have a different
     internal representation.

 -- Function: int fgetpos (FILE *STREAM, fpos_t *POSITION)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function stores the value of the file position indicator for
     the stream STREAM in the ‘fpos_t’ object pointed to by POSITION.
     If successful, ‘fgetpos’ returns zero; otherwise it returns a
     nonzero value and stores an implementation-defined positive value
     in ‘errno’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ on a
     32 bit system the function is in fact ‘fgetpos64’.  I.e., the LFS
     interface transparently replaces the old interface.

 -- Function: int fgetpos64 (FILE *STREAM, fpos64_t *POSITION)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function is similar to ‘fgetpos’ but the file position is
     returned in a variable of type ‘fpos64_t’ to which POSITION points.

     If the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ on a 32
     bits machine this function is available under the name ‘fgetpos’
     and so transparently replaces the old interface.

 -- Function: int fsetpos (FILE *STREAM, const fpos_t *POSITION)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function sets the file position indicator for the stream
     STREAM to the position POSITION, which must have been set by a
     previous call to ‘fgetpos’ on the same stream.  If successful,
     ‘fsetpos’ clears the end-of-file indicator on the stream, discards
     any characters that were “pushed back” by the use of ‘ungetc’, and
     returns a value of zero.  Otherwise, ‘fsetpos’ returns a nonzero
     value and stores an implementation-defined positive value in
     ‘errno’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ on a
     32 bit system the function is in fact ‘fsetpos64’.  I.e., the LFS
     interface transparently replaces the old interface.

 -- Function: int fsetpos64 (FILE *STREAM, const fpos64_t *POSITION)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function is similar to ‘fsetpos’ but the file position used
     for positioning is provided in a variable of type ‘fpos64_t’ to
     which POSITION points.

     If the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ on a 32
     bits machine this function is available under the name ‘fsetpos’
     and so transparently replaces the old interface.


File: libc.info,  Node: Stream Buffering,  Next: Other Kinds of Streams,  Prev: Portable Positioning,  Up: I/O on Streams

12.20 Stream Buffering
======================

Characters that are written to a stream are normally accumulated and
transmitted asynchronously to the file in a block, instead of appearing
as soon as they are output by the application program.  Similarly,
streams often retrieve input from the host environment in blocks rather
than on a character-by-character basis.  This is called "buffering".

   If you are writing programs that do interactive input and output
using streams, you need to understand how buffering works when you
design the user interface to your program.  Otherwise, you might find
that output (such as progress or prompt messages) doesn’t appear when
you intended it to, or displays some other unexpected behavior.

   This section deals only with controlling when characters are
transmitted between the stream and the file or device, and _not_ with
how things like echoing, flow control, and the like are handled on
specific classes of devices.  For information on common control
operations on terminal devices, see *note Low-Level Terminal
Interface::.

   You can bypass the stream buffering facilities altogether by using
the low-level input and output functions that operate on file
descriptors instead.  *Note Low-Level I/O::.

* Menu:

* Buffering Concepts::          Terminology is defined here.
* Flushing Buffers::            How to ensure that output buffers are flushed.
* Controlling Buffering::       How to specify what kind of buffering to use.


File: libc.info,  Node: Buffering Concepts,  Next: Flushing Buffers,  Up: Stream Buffering

12.20.1 Buffering Concepts
--------------------------

There are three different kinds of buffering strategies:

   • Characters written to or read from an "unbuffered" stream are
     transmitted individually to or from the file as soon as possible.

   • Characters written to a "line buffered" stream are transmitted to
     the file in blocks when a newline character is encountered.

   • Characters written to or read from a "fully buffered" stream are
     transmitted to or from the file in blocks of arbitrary size.

   Newly opened streams are normally fully buffered, with one exception:
a stream connected to an interactive device such as a terminal is
initially line buffered.  *Note Controlling Buffering::, for information
on how to select a different kind of buffering.  Usually the automatic
selection gives you the most convenient kind of buffering for the file
or device you open.

   The use of line buffering for interactive devices implies that output
messages ending in a newline will appear immediately—which is usually
what you want.  Output that doesn’t end in a newline might or might not
show up immediately, so if you want them to appear immediately, you
should flush buffered output explicitly with ‘fflush’, as described in
*note Flushing Buffers::.


File: libc.info,  Node: Flushing Buffers,  Next: Controlling Buffering,  Prev: Buffering Concepts,  Up: Stream Buffering

12.20.2 Flushing Buffers
------------------------

"Flushing" output on a buffered stream means transmitting all
accumulated characters to the file.  There are many circumstances when
buffered output on a stream is flushed automatically:

   • When you try to do output and the output buffer is full.

   • When the stream is closed.  *Note Closing Streams::.

   • When the program terminates by calling ‘exit’.  *Note Normal
     Termination::.

   • When a newline is written, if the stream is line buffered.

   • Whenever an input operation on _any_ stream actually reads data
     from its file.

   If you want to flush the buffered output at another time, call
‘fflush’, which is declared in the header file ‘stdio.h’.

 -- Function: int fflush (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function causes any buffered output on STREAM to be delivered
     to the file.  If STREAM is a null pointer, then ‘fflush’ causes
     buffered output on _all_ open output streams to be flushed.

     This function returns ‘EOF’ if a write error occurs, or zero
     otherwise.

 -- Function: int fflush_unlocked (FILE *STREAM)
     Preliminary: | MT-Safe race:stream | AS-Unsafe corrupt | AC-Unsafe
     corrupt | *Note POSIX Safety Concepts::.

     The ‘fflush_unlocked’ function is equivalent to the ‘fflush’
     function except that it does not implicitly lock the stream.

   The ‘fflush’ function can be used to flush all streams currently
opened.  While this is useful in some situations it does often more than
necessary since it might be done in situations when terminal input is
required and the program wants to be sure that all output is visible on
the terminal.  But this means that only line buffered streams have to be
flushed.  Solaris introduced a function especially for this.  It was
always available in the GNU C Library in some form but never officially
exported.

 -- Function: void _flushlbf (void)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     The ‘_flushlbf’ function flushes all line buffered streams
     currently opened.

     This function is declared in the ‘stdio_ext.h’ header.

   *Compatibility Note:* Some brain-damaged operating systems have been
known to be so thoroughly fixated on line-oriented input and output that
flushing a line buffered stream causes a newline to be written!
Fortunately, this “feature” seems to be becoming less common.  You do
not need to worry about this with the GNU C Library.

   In some situations it might be useful to not flush the output pending
for a stream but instead simply forget it.  If transmission is costly
and the output is not needed anymore this is valid reasoning.  In this
situation a non-standard function introduced in Solaris and available in
the GNU C Library can be used.

 -- Function: void __fpurge (FILE *STREAM)
     Preliminary: | MT-Safe race:stream | AS-Unsafe corrupt | AC-Unsafe
     corrupt | *Note POSIX Safety Concepts::.

     The ‘__fpurge’ function causes the buffer of the stream STREAM to
     be emptied.  If the stream is currently in read mode all input in
     the buffer is lost.  If the stream is in output mode the buffered
     output is not written to the device (or whatever other underlying
     storage) and the buffer the cleared.

     This function is declared in ‘stdio_ext.h’.


File: libc.info,  Node: Controlling Buffering,  Prev: Flushing Buffers,  Up: Stream Buffering

12.20.3 Controlling Which Kind of Buffering
-------------------------------------------

After opening a stream (but before any other operations have been
performed on it), you can explicitly specify what kind of buffering you
want it to have using the ‘setvbuf’ function.

   The facilities listed in this section are declared in the header file
‘stdio.h’.

 -- Function: int setvbuf (FILE *STREAM, char *BUF, int MODE, size_t
          SIZE)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function is used to specify that the stream STREAM should have
     the buffering mode MODE, which can be either ‘_IOFBF’ (for full
     buffering), ‘_IOLBF’ (for line buffering), or ‘_IONBF’ (for
     unbuffered input/output).

     If you specify a null pointer as the BUF argument, then ‘setvbuf’
     allocates a buffer itself using ‘malloc’.  This buffer will be
     freed when you close the stream.

     Otherwise, BUF should be a character array that can hold at least
     SIZE characters.  You should not free the space for this array as
     long as the stream remains open and this array remains its buffer.
     You should usually either allocate it statically, or ‘malloc’
     (*note Unconstrained Allocation::) the buffer.  Using an automatic
     array is not a good idea unless you close the file before exiting
     the block that declares the array.

     While the array remains a stream buffer, the stream I/O functions
     will use the buffer for their internal purposes.  You shouldn’t try
     to access the values in the array directly while the stream is
     using it for buffering.

     The ‘setvbuf’ function returns zero on success, or a nonzero value
     if the value of MODE is not valid or if the request could not be
     honored.

 -- Macro: int _IOFBF
     The value of this macro is an integer constant expression that can
     be used as the MODE argument to the ‘setvbuf’ function to specify
     that the stream should be fully buffered.

 -- Macro: int _IOLBF
     The value of this macro is an integer constant expression that can
     be used as the MODE argument to the ‘setvbuf’ function to specify
     that the stream should be line buffered.

 -- Macro: int _IONBF
     The value of this macro is an integer constant expression that can
     be used as the MODE argument to the ‘setvbuf’ function to specify
     that the stream should be unbuffered.

 -- Macro: int BUFSIZ
     The value of this macro is an integer constant expression that is
     good to use for the SIZE argument to ‘setvbuf’.  This value is
     guaranteed to be at least ‘256’.

     The value of ‘BUFSIZ’ is chosen on each system so as to make stream
     I/O efficient.  So it is a good idea to use ‘BUFSIZ’ as the size
     for the buffer when you call ‘setvbuf’.

     Actually, you can get an even better value to use for the buffer
     size by means of the ‘fstat’ system call: it is found in the
     ‘st_blksize’ field of the file attributes.  *Note Attribute
     Meanings::.

     Sometimes people also use ‘BUFSIZ’ as the allocation size of
     buffers used for related purposes, such as strings used to receive
     a line of input with ‘fgets’ (*note Character Input::).  There is
     no particular reason to use ‘BUFSIZ’ for this instead of any other
     integer, except that it might lead to doing I/O in chunks of an
     efficient size.

 -- Function: void setbuf (FILE *STREAM, char *BUF)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     If BUF is a null pointer, the effect of this function is equivalent
     to calling ‘setvbuf’ with a MODE argument of ‘_IONBF’.  Otherwise,
     it is equivalent to calling ‘setvbuf’ with BUF, and a MODE of
     ‘_IOFBF’ and a SIZE argument of ‘BUFSIZ’.

     The ‘setbuf’ function is provided for compatibility with old code;
     use ‘setvbuf’ in all new programs.

 -- Function: void setbuffer (FILE *STREAM, char *BUF, size_t SIZE)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     If BUF is a null pointer, this function makes STREAM unbuffered.
     Otherwise, it makes STREAM fully buffered using BUF as the buffer.
     The SIZE argument specifies the length of BUF.

     This function is provided for compatibility with old BSD code.  Use
     ‘setvbuf’ instead.

 -- Function: void setlinebuf (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Unsafe corrupt | AC-Unsafe lock corrupt
     | *Note POSIX Safety Concepts::.

     This function makes STREAM be line buffered, and allocates the
     buffer for you.

     This function is provided for compatibility with old BSD code.  Use
     ‘setvbuf’ instead.

   It is possible to query whether a given stream is line buffered or
not using a non-standard function introduced in Solaris and available in
the GNU C Library.

 -- Function: int __flbf (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘__flbf’ function will return a nonzero value in case the
     stream STREAM is line buffered.  Otherwise the return value is
     zero.

     This function is declared in the ‘stdio_ext.h’ header.

   Two more extensions allow to determine the size of the buffer and how
much of it is used.  These functions were also introduced in Solaris.

 -- Function: size_t __fbufsize (FILE *STREAM)
     Preliminary: | MT-Safe race:stream | AS-Unsafe corrupt | AC-Safe |
     *Note POSIX Safety Concepts::.

     The ‘__fbufsize’ function return the size of the buffer in the
     stream STREAM.  This value can be used to optimize the use of the
     stream.

     This function is declared in the ‘stdio_ext.h’ header.

 -- Function: size_t __fpending (FILE *STREAM)
     Preliminary: | MT-Safe race:stream | AS-Unsafe corrupt | AC-Safe |
     *Note POSIX Safety Concepts::.

     The ‘__fpending’ function returns the number of bytes currently in
     the output buffer.  For wide-oriented stream the measuring unit is
     wide characters.  This function should not be used on buffers in
     read mode or opened read-only.

     This function is declared in the ‘stdio_ext.h’ header.


File: libc.info,  Node: Other Kinds of Streams,  Next: Formatted Messages,  Prev: Stream Buffering,  Up: I/O on Streams

12.21 Other Kinds of Streams
============================

The GNU C Library provides ways for you to define additional kinds of
streams that do not necessarily correspond to an open file.

   One such type of stream takes input from or writes output to a
string.  These kinds of streams are used internally to implement the
‘sprintf’ and ‘sscanf’ functions.  You can also create such a stream
explicitly, using the functions described in *note String Streams::.

   More generally, you can define streams that do input/output to
arbitrary objects using functions supplied by your program.  This
protocol is discussed in *note Custom Streams::.

   *Portability Note:* The facilities described in this section are
specific to GNU. Other systems or C implementations might or might not
provide equivalent functionality.

* Menu:

* String Streams::              Streams that get data from or put data in
				 a string or memory buffer.
* Custom Streams::              Defining your own streams with an arbitrary
				 input data source and/or output data sink.


File: libc.info,  Node: String Streams,  Next: Custom Streams,  Up: Other Kinds of Streams

12.21.1 String Streams
----------------------

The ‘fmemopen’ and ‘open_memstream’ functions allow you to do I/O to a
string or memory buffer.  These facilities are declared in ‘stdio.h’.

 -- Function: FILE * fmemopen (void *BUF, size_t SIZE, const char
          *OPENTYPE)
     Preliminary: | MT-Safe | AS-Unsafe heap lock | AC-Unsafe mem lock |
     *Note POSIX Safety Concepts::.

     This function opens a stream that allows the access specified by
     the OPENTYPE argument, that reads from or writes to the buffer
     specified by the argument BUF.  This array must be at least SIZE
     bytes long.

     If you specify a null pointer as the BUF argument, ‘fmemopen’
     dynamically allocates an array SIZE bytes long (as with ‘malloc’;
     *note Unconstrained Allocation::).  This is really only useful if
     you are going to write things to the buffer and then read them back
     in again, because you have no way of actually getting a pointer to
     the buffer (for this, try ‘open_memstream’, below).  The buffer is
     freed when the stream is closed.

     The argument OPENTYPE is the same as in ‘fopen’ (*note Opening
     Streams::).  If the OPENTYPE specifies append mode, then the
     initial file position is set to the first null character in the
     buffer.  Otherwise the initial file position is at the beginning of
     the buffer.

     When a stream open for writing is flushed or closed, a null
     character (zero byte) is written at the end of the buffer if it
     fits.  You should add an extra byte to the SIZE argument to account
     for this.  Attempts to write more than SIZE bytes to the buffer
     result in an error.

     For a stream open for reading, null characters (zero bytes) in the
     buffer do not count as “end of file”.  Read operations indicate end
     of file only when the file position advances past SIZE bytes.  So,
     if you want to read characters from a null-terminated string, you
     should supply the length of the string as the SIZE argument.

   Here is an example of using ‘fmemopen’ to create a stream for reading
from a string:


     #include <stdio.h>

     static char buffer[] = "foobar";

     int
     main (void)
     {
       int ch;
       FILE *stream;

       stream = fmemopen (buffer, strlen (buffer), "r");
       while ((ch = fgetc (stream)) != EOF)
         printf ("Got %c\n", ch);
       fclose (stream);

       return 0;
     }

   This program produces the following output:

     Got f
     Got o
     Got o
     Got b
     Got a
     Got r

 -- Function: FILE * open_memstream (char **PTR, size_t *SIZELOC)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     This function opens a stream for writing to a buffer.  The buffer
     is allocated dynamically and grown as necessary, using ‘malloc’.
     After you’ve closed the stream, this buffer is your responsibility
     to clean up using ‘free’ or ‘realloc’.  *Note Unconstrained
     Allocation::.

     When the stream is closed with ‘fclose’ or flushed with ‘fflush’,
     the locations PTR and SIZELOC are updated to contain the pointer to
     the buffer and its size.  The values thus stored remain valid only
     as long as no further output on the stream takes place.  If you do
     more output, you must flush the stream again to store new values
     before you use them again.

     A null character is written at the end of the buffer.  This null
     character is _not_ included in the size value stored at SIZELOC.

     You can move the stream’s file position with ‘fseek’ or ‘fseeko’
     (*note File Positioning::).  Moving the file position past the end
     of the data already written fills the intervening space with
     zeroes.

   Here is an example of using ‘open_memstream’:


     #include <stdio.h>

     int
     main (void)
     {
       char *bp;
       size_t size;
       FILE *stream;

       stream = open_memstream (&bp, &size);
       fprintf (stream, "hello");
       fflush (stream);
       printf ("buf = `%s', size = %d\n", bp, size);
       fprintf (stream, ", world");
       fclose (stream);
       printf ("buf = `%s', size = %d\n", bp, size);

       return 0;
     }

   This program produces the following output:

     buf = `hello', size = 5
     buf = `hello, world', size = 12


File: libc.info,  Node: Custom Streams,  Prev: String Streams,  Up: Other Kinds of Streams

12.21.2 Programming Your Own Custom Streams
-------------------------------------------

This section describes how you can make a stream that gets input from an
arbitrary data source or writes output to an arbitrary data sink
programmed by you.  We call these "custom streams".  The functions and
types described here are all GNU extensions.

* Menu:

* Streams and Cookies::         The "cookie" records where to fetch or
				 store data that is read or written.
* Hook Functions::              How you should define the four "hook
				 functions" that a custom stream needs.


File: libc.info,  Node: Streams and Cookies,  Next: Hook Functions,  Up: Custom Streams

12.21.2.1 Custom Streams and Cookies
....................................

Inside every custom stream is a special object called the "cookie".
This is an object supplied by you which records where to fetch or store
the data read or written.  It is up to you to define a data type to use
for the cookie.  The stream functions in the library never refer
directly to its contents, and they don’t even know what the type is;
they record its address with type ‘void *’.

   To implement a custom stream, you must specify _how_ to fetch or
store the data in the specified place.  You do this by defining "hook
functions" to read, write, change “file position”, and close the stream.
All four of these functions will be passed the stream’s cookie so they
can tell where to fetch or store the data.  The library functions don’t
know what’s inside the cookie, but your functions will know.

   When you create a custom stream, you must specify the cookie pointer,
and also the four hook functions stored in a structure of type
‘cookie_io_functions_t’.

   These facilities are declared in ‘stdio.h’.

 -- Data Type: cookie_io_functions_t
     This is a structure type that holds the functions that define the
     communications protocol between the stream and its cookie.  It has
     the following members:

     ‘cookie_read_function_t *read’
          This is the function that reads data from the cookie.  If the
          value is a null pointer instead of a function, then read
          operations on this stream always return ‘EOF’.

     ‘cookie_write_function_t *write’
          This is the function that writes data to the cookie.  If the
          value is a null pointer instead of a function, then data
          written to the stream is discarded.

     ‘cookie_seek_function_t *seek’
          This is the function that performs the equivalent of file
          positioning on the cookie.  If the value is a null pointer
          instead of a function, calls to ‘fseek’ or ‘fseeko’ on this
          stream can only seek to locations within the buffer; any
          attempt to seek outside the buffer will return an ‘ESPIPE’
          error.

     ‘cookie_close_function_t *close’
          This function performs any appropriate cleanup on the cookie
          when closing the stream.  If the value is a null pointer
          instead of a function, nothing special is done to close the
          cookie when the stream is closed.

 -- Function: FILE * fopencookie (void *COOKIE, const char *OPENTYPE,
          cookie_io_functions_t IO-FUNCTIONS)
     Preliminary: | MT-Safe | AS-Unsafe heap lock | AC-Unsafe mem lock |
     *Note POSIX Safety Concepts::.

     This function actually creates the stream for communicating with
     the COOKIE using the functions in the IO-FUNCTIONS argument.  The
     OPENTYPE argument is interpreted as for ‘fopen’; see *note Opening
     Streams::.  (But note that the “truncate on open” option is
     ignored.)  The new stream is fully buffered.

     The ‘fopencookie’ function returns the newly created stream, or a
     null pointer in case of an error.


File: libc.info,  Node: Hook Functions,  Prev: Streams and Cookies,  Up: Custom Streams

12.21.2.2 Custom Stream Hook Functions
......................................

Here are more details on how you should define the four hook functions
that a custom stream needs.

   You should define the function to read data from the cookie as:

     ssize_t READER (void *COOKIE, char *BUFFER, size_t SIZE)

   This is very similar to the ‘read’ function; see *note I/O
Primitives::.  Your function should transfer up to SIZE bytes into the
BUFFER, and return the number of bytes read, or zero to indicate
end-of-file.  You can return a value of ‘-1’ to indicate an error.

   You should define the function to write data to the cookie as:

     ssize_t WRITER (void *COOKIE, const char *BUFFER, size_t SIZE)

   This is very similar to the ‘write’ function; see *note I/O
Primitives::.  Your function should transfer up to SIZE bytes from the
buffer, and return the number of bytes written.  You can return a value
of ‘0’ to indicate an error.  You must not return any negative value.

   You should define the function to perform seek operations on the
cookie as:

     int SEEKER (void *COOKIE, off64_t *POSITION, int WHENCE)

   For this function, the POSITION and WHENCE arguments are interpreted
as for ‘fgetpos’; see *note Portable Positioning::.

   After doing the seek operation, your function should store the
resulting file position relative to the beginning of the file in
POSITION.  Your function should return a value of ‘0’ on success and
‘-1’ to indicate an error.

   You should define the function to do cleanup operations on the cookie
appropriate for closing the stream as:

     int CLEANER (void *COOKIE)

   Your function should return ‘-1’ to indicate an error, and ‘0’
otherwise.

 -- Data Type: cookie_read_function_t
     This is the data type that the read function for a custom stream
     should have.  If you declare the function as shown above, this is
     the type it will have.

 -- Data Type: cookie_write_function_t
     The data type of the write function for a custom stream.

 -- Data Type: cookie_seek_function_t
     The data type of the seek function for a custom stream.

 -- Data Type: cookie_close_function_t
     The data type of the close function for a custom stream.


File: libc.info,  Node: Formatted Messages,  Prev: Other Kinds of Streams,  Up: I/O on Streams

12.22 Formatted Messages
========================

On systems which are based on System V messages of programs (especially
the system tools) are printed in a strict form using the ‘fmtmsg’
function.  The uniformity sometimes helps the user to interpret messages
and the strictness tests of the ‘fmtmsg’ function ensure that the
programmer follows some minimal requirements.

* Menu:

* Printing Formatted Messages::   The ‘fmtmsg’ function.
* Adding Severity Classes::       Add more severity classes.
* Example::                       How to use ‘fmtmsg’ and ‘addseverity’.


File: libc.info,  Node: Printing Formatted Messages,  Next: Adding Severity Classes,  Up: Formatted Messages

12.22.1 Printing Formatted Messages
-----------------------------------

Messages can be printed to standard error and/or to the console.  To
select the destination the programmer can use the following two values,
bitwise OR combined if wanted, for the CLASSIFICATION parameter of
‘fmtmsg’:

‘MM_PRINT’
     Display the message in standard error.
‘MM_CONSOLE’
     Display the message on the system console.

   The erroneous piece of the system can be signalled by exactly one of
the following values which also is bitwise ORed with the CLASSIFICATION
parameter to ‘fmtmsg’:

‘MM_HARD’
     The source of the condition is some hardware.
‘MM_SOFT’
     The source of the condition is some software.
‘MM_FIRM’
     The source of the condition is some firmware.

   A third component of the CLASSIFICATION parameter to ‘fmtmsg’ can
describe the part of the system which detects the problem.  This is done
by using exactly one of the following values:

‘MM_APPL’
     The erroneous condition is detected by the application.
‘MM_UTIL’
     The erroneous condition is detected by a utility.
‘MM_OPSYS’
     The erroneous condition is detected by the operating system.

   A last component of CLASSIFICATION can signal the results of this
message.  Exactly one of the following values can be used:

‘MM_RECOVER’
     It is a recoverable error.
‘MM_NRECOV’
     It is a non-recoverable error.

 -- Function: int fmtmsg (long int CLASSIFICATION, const char *LABEL,
          int SEVERITY, const char *TEXT, const char *ACTION, const char
          *TAG)
     Preliminary: | MT-Safe | AS-Unsafe lock | AC-Safe | *Note POSIX
     Safety Concepts::.

     Display a message described by its parameters on the device(s)
     specified in the CLASSIFICATION parameter.  The LABEL parameter
     identifies the source of the message.  The string should consist of
     two colon separated parts where the first part has not more than 10
     and the second part not more than 14 characters.  The TEXT
     parameter describes the condition of the error, the ACTION
     parameter possible steps to recover from the error and the TAG
     parameter is a reference to the online documentation where more
     information can be found.  It should contain the LABEL value and a
     unique identification number.

     Each of the parameters can be a special value which means this
     value is to be omitted.  The symbolic names for these values are:

     ‘MM_NULLLBL’
          Ignore LABEL parameter.
     ‘MM_NULLSEV’
          Ignore SEVERITY parameter.
     ‘MM_NULLMC’
          Ignore CLASSIFICATION parameter.  This implies that nothing is
          actually printed.
     ‘MM_NULLTXT’
          Ignore TEXT parameter.
     ‘MM_NULLACT’
          Ignore ACTION parameter.
     ‘MM_NULLTAG’
          Ignore TAG parameter.

     There is another way certain fields can be omitted from the output
     to standard error.  This is described below in the description of
     environment variables influencing the behavior.

     The SEVERITY parameter can have one of the values in the following
     table:

     ‘MM_NOSEV’
          Nothing is printed, this value is the same as ‘MM_NULLSEV’.
     ‘MM_HALT’
          This value is printed as ‘HALT’.
     ‘MM_ERROR’
          This value is printed as ‘ERROR’.
     ‘MM_WARNING’
          This value is printed as ‘WARNING’.
     ‘MM_INFO’
          This value is printed as ‘INFO’.

     The numeric value of these five macros are between ‘0’ and ‘4’.
     Using the environment variable ‘SEV_LEVEL’ or using the
     ‘addseverity’ function one can add more severity levels with their
     corresponding string to print.  This is described below (*note
     Adding Severity Classes::).

     If no parameter is ignored the output looks like this:

          LABEL: SEVERITY-STRING: TEXT
          TO FIX: ACTION TAG

     The colons, new line characters and the ‘TO FIX’ string are
     inserted if necessary, i.e., if the corresponding parameter is not
     ignored.

     This function is specified in the X/Open Portability Guide.  It is
     also available on all systems derived from System V.

     The function returns the value ‘MM_OK’ if no error occurred.  If
     only the printing to standard error failed, it returns ‘MM_NOMSG’.
     If printing to the console fails, it returns ‘MM_NOCON’.  If
     nothing is printed ‘MM_NOTOK’ is returned.  Among situations where
     all outputs fail this last value is also returned if a parameter
     value is incorrect.

   There are two environment variables which influence the behavior of
‘fmtmsg’.  The first is ‘MSGVERB’.  It is used to control the output
actually happening on standard error (_not_ the console output).  Each
of the five fields can explicitly be enabled.  To do this the user has
to put the ‘MSGVERB’ variable with a format like the following in the
environment before calling the ‘fmtmsg’ function the first time:

     MSGVERB=KEYWORD[:KEYWORD[:…]]

   Valid KEYWORDs are ‘label’, ‘severity’, ‘text’, ‘action’, and ‘tag’.
If the environment variable is not given or is the empty string, a not
supported keyword is given or the value is somehow else invalid, no part
of the message is masked out.

   The second environment variable which influences the behavior of
‘fmtmsg’ is ‘SEV_LEVEL’.  This variable and the change in the behavior
of ‘fmtmsg’ is not specified in the X/Open Portability Guide.  It is
available in System V systems, though.  It can be used to introduce new
severity levels.  By default, only the five severity levels described
above are available.  Any other numeric value would make ‘fmtmsg’ print
nothing.

   If the user puts ‘SEV_LEVEL’ with a format like

     SEV_LEVEL=[DESCRIPTION[:DESCRIPTION[:…]]]

in the environment of the process before the first call to ‘fmtmsg’,
where DESCRIPTION has a value of the form

     SEVERITY-KEYWORD,LEVEL,PRINTSTRING

   The SEVERITY-KEYWORD part is not used by ‘fmtmsg’ but it has to be
present.  The LEVEL part is a string representation of a number.  The
numeric value must be a number greater than 4.  This value must be used
in the SEVERITY parameter of ‘fmtmsg’ to select this class.  It is not
possible to overwrite any of the predefined classes.  The PRINTSTRING is
the string printed when a message of this class is processed by ‘fmtmsg’
(see above, ‘fmtsmg’ does not print the numeric value but instead the
string representation).


File: libc.info,  Node: Adding Severity Classes,  Next: Example,  Prev: Printing Formatted Messages,  Up: Formatted Messages

12.22.2 Adding Severity Classes
-------------------------------

There is another possibility to introduce severity classes besides using
the environment variable ‘SEV_LEVEL’.  This simplifies the task of
introducing new classes in a running program.  One could use the
‘setenv’ or ‘putenv’ function to set the environment variable, but this
is toilsome.

 -- Function: int addseverity (int SEVERITY, const char *STRING)
     Preliminary: | MT-Safe | AS-Unsafe heap lock | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     This function allows the introduction of new severity classes which
     can be addressed by the SEVERITY parameter of the ‘fmtmsg’
     function.  The SEVERITY parameter of ‘addseverity’ must match the
     value for the parameter with the same name of ‘fmtmsg’, and STRING
     is the string printed in the actual messages instead of the numeric
     value.

     If STRING is ‘NULL’ the severity class with the numeric value
     according to SEVERITY is removed.

     It is not possible to overwrite or remove one of the default
     severity classes.  All calls to ‘addseverity’ with SEVERITY set to
     one of the values for the default classes will fail.

     The return value is ‘MM_OK’ if the task was successfully performed.
     If the return value is ‘MM_NOTOK’ something went wrong.  This could
     mean that no more memory is available or a class is not available
     when it has to be removed.

     This function is not specified in the X/Open Portability Guide
     although the ‘fmtsmg’ function is.  It is available on System V
     systems.


File: libc.info,  Node: Example,  Prev: Adding Severity Classes,  Up: Formatted Messages

12.22.3 How to use ‘fmtmsg’ and ‘addseverity’
---------------------------------------------

Here is a simple example program to illustrate the use of the both
functions described in this section.


     #include <fmtmsg.h>

     int
     main (void)
     {
       addseverity (5, "NOTE2");
       fmtmsg (MM_PRINT, "only1field", MM_INFO, "text2", "action2", "tag2");
       fmtmsg (MM_PRINT, "UX:cat", 5, "invalid syntax", "refer to manual",
               "UX:cat:001");
       fmtmsg (MM_PRINT, "label:foo", 6, "text", "action", "tag");
       return 0;
     }

   The second call to ‘fmtmsg’ illustrates a use of this function as it
usually occurs on System V systems, which heavily use this function.  It
seems worthwhile to give a short explanation here of how this system
works on System V. The value of the LABEL field (‘UX:cat’) says that the
error occurred in the Unix program ‘cat’.  The explanation of the error
follows and the value for the ACTION parameter is ‘"refer to manual"’.
One could be more specific here, if necessary.  The TAG field contains,
as proposed above, the value of the string given for the LABEL
parameter, and additionally a unique ID (‘001’ in this case).  For a GNU
environment this string could contain a reference to the corresponding
node in the Info page for the program.

Running this program without specifying the ‘MSGVERB’ and ‘SEV_LEVEL’
function produces the following output:

     UX:cat: NOTE2: invalid syntax
     TO FIX: refer to manual UX:cat:001

   We see the different fields of the message and how the extra glue
(the colons and the ‘TO FIX’ string) are printed.  But only one of the
three calls to ‘fmtmsg’ produced output.  The first call does not print
anything because the LABEL parameter is not in the correct form.  The
string must contain two fields, separated by a colon (*note Printing
Formatted Messages::).  The third ‘fmtmsg’ call produced no output since
the class with the numeric value ‘6’ is not defined.  Although a class
with numeric value ‘5’ is also not defined by default, the call to
‘addseverity’ introduces it and the second call to ‘fmtmsg’ produces the
above output.

   When we change the environment of the program to contain
‘SEV_LEVEL=XXX,6,NOTE’ when running it we get a different result:

     UX:cat: NOTE2: invalid syntax
     TO FIX: refer to manual UX:cat:001
     label:foo: NOTE: text
     TO FIX: action tag

   Now the third call to ‘fmtmsg’ produced some output and we see how
the string ‘NOTE’ from the environment variable appears in the message.

   Now we can reduce the output by specifying which fields we are
interested in.  If we additionally set the environment variable
‘MSGVERB’ to the value ‘severity:label:action’ we get the following
output:

     UX:cat: NOTE2
     TO FIX: refer to manual
     label:foo: NOTE
     TO FIX: action

I.e., the output produced by the TEXT and the TAG parameters to ‘fmtmsg’
vanished.  Please also note that now there is no colon after the ‘NOTE’
and ‘NOTE2’ strings in the output.  This is not necessary since there is
no more output on this line because the text is missing.


File: libc.info,  Node: Low-Level I/O,  Next: File System Interface,  Prev: I/O on Streams,  Up: Top

13 Low-Level Input/Output
*************************

This chapter describes functions for performing low-level input/output
operations on file descriptors.  These functions include the primitives
for the higher-level I/O functions described in *note I/O on Streams::,
as well as functions for performing low-level control operations for
which there are no equivalents on streams.

   Stream-level I/O is more flexible and usually more convenient;
therefore, programmers generally use the descriptor-level functions only
when necessary.  These are some of the usual reasons:

   • For reading binary files in large chunks.

   • For reading an entire file into core before parsing it.

   • To perform operations other than data transfer, which can only be
     done with a descriptor.  (You can use ‘fileno’ to get the
     descriptor corresponding to a stream.)

   • To pass descriptors to a child process.  (The child can create its
     own stream to use a descriptor that it inherits, but cannot inherit
     a stream directly.)

* Menu:

* Opening and Closing Files::           How to open and close file
                                         descriptors.
* I/O Primitives::                      Reading and writing data.
* File Position Primitive::             Setting a descriptor’s file
                                         position.
* Descriptors and Streams::             Converting descriptor to stream
                                         or vice-versa.
* Stream/Descriptor Precautions::       Precautions needed if you use both
                                         descriptors and streams.
* Scatter-Gather::                      Fast I/O to discontinuous buffers.
* Memory-mapped I/O::                   Using files like memory.
* Waiting for I/O::                     How to check for input or output
					 on multiple file descriptors.
* Synchronizing I/O::                   Making sure all I/O actions completed.
* Asynchronous I/O::                    Perform I/O in parallel.
* Control Operations::                  Various other operations on file
					 descriptors.
* Duplicating Descriptors::             Fcntl commands for duplicating
                                         file descriptors.
* Descriptor Flags::                    Fcntl commands for manipulating
                                         flags associated with file
                                         descriptors.
* File Status Flags::                   Fcntl commands for manipulating
                                         flags associated with open files.
* File Locks::                          Fcntl commands for implementing
                                         file locking.
* Open File Description Locks::         Fcntl commands for implementing
                                         open file description locking.
* Open File Description Locks Example:: An example of open file description lock
                                         usage
* Interrupt Input::                     Getting an asynchronous signal when
                                         input arrives.
* IOCTLs::                              Generic I/O Control operations.


File: libc.info,  Node: Opening and Closing Files,  Next: I/O Primitives,  Up: Low-Level I/O

13.1 Opening and Closing Files
==============================

This section describes the primitives for opening and closing files
using file descriptors.  The ‘open’ and ‘creat’ functions are declared
in the header file ‘fcntl.h’, while ‘close’ is declared in ‘unistd.h’.

 -- Function: int open (const char *FILENAME, int FLAGS[, mode_t MODE])
     Preliminary: | MT-Safe | AS-Safe | AC-Safe fd | *Note POSIX Safety
     Concepts::.

     The ‘open’ function creates and returns a new file descriptor for
     the file named by FILENAME.  Initially, the file position indicator
     for the file is at the beginning of the file.  The argument MODE
     (*note Permission Bits::) is used only when a file is created, but
     it doesn’t hurt to supply the argument in any case.

     The FLAGS argument controls how the file is to be opened.  This is
     a bit mask; you create the value by the bitwise OR of the
     appropriate parameters (using the ‘|’ operator in C). *Note File
     Status Flags::, for the parameters available.

     The normal return value from ‘open’ is a non-negative integer file
     descriptor.  In the case of an error, a value of -1 is returned
     instead.  In addition to the usual file name errors (*note File
     Name Errors::), the following ‘errno’ error conditions are defined
     for this function:

     ‘EACCES’
          The file exists but is not readable/writable as requested by
          the FLAGS argument, the file does not exist and the directory
          is unwritable so it cannot be created.

     ‘EEXIST’
          Both ‘O_CREAT’ and ‘O_EXCL’ are set, and the named file
          already exists.

     ‘EINTR’
          The ‘open’ operation was interrupted by a signal.  *Note
          Interrupted Primitives::.

     ‘EISDIR’
          The FLAGS argument specified write access, and the file is a
          directory.

     ‘EMFILE’
          The process has too many files open.  The maximum number of
          file descriptors is controlled by the ‘RLIMIT_NOFILE’ resource
          limit; *note Limits on Resources::.

     ‘ENFILE’
          The entire system, or perhaps the file system which contains
          the directory, cannot support any additional open files at the
          moment.  (This problem cannot happen on GNU/Hurd systems.)

     ‘ENOENT’
          The named file does not exist, and ‘O_CREAT’ is not specified.

     ‘ENOSPC’
          The directory or file system that would contain the new file
          cannot be extended, because there is no disk space left.

     ‘ENXIO’
          ‘O_NONBLOCK’ and ‘O_WRONLY’ are both set in the FLAGS
          argument, the file named by FILENAME is a FIFO (*note Pipes
          and FIFOs::), and no process has the file open for reading.

     ‘EROFS’
          The file resides on a read-only file system and any of
          ‘O_WRONLY’, ‘O_RDWR’, and ‘O_TRUNC’ are set in the FLAGS
          argument, or ‘O_CREAT’ is set and the file does not already
          exist.

     If on a 32 bit machine the sources are translated with
     ‘_FILE_OFFSET_BITS == 64’ the function ‘open’ returns a file
     descriptor opened in the large file mode which enables the file
     handling functions to use files up to 2^63 bytes in size and offset
     from −2^63 to 2^63.  This happens transparently for the user since
     all of the lowlevel file handling functions are equally replaced.

     This function is a cancellation point in multi-threaded programs.
     This is a problem if the thread allocates some resources (like
     memory, file descriptors, semaphores or whatever) at the time
     ‘open’ is called.  If the thread gets canceled these resources stay
     allocated until the program ends.  To avoid this calls to ‘open’
     should be protected using cancellation handlers.

     The ‘open’ function is the underlying primitive for the ‘fopen’ and
     ‘freopen’ functions, that create streams.

 -- Function: int open64 (const char *FILENAME, int FLAGS[, mode_t
          MODE])
     Preliminary: | MT-Safe | AS-Safe | AC-Safe fd | *Note POSIX Safety
     Concepts::.

     This function is similar to ‘open’.  It returns a file descriptor
     which can be used to access the file named by FILENAME.  The only
     difference is that on 32 bit systems the file is opened in the
     large file mode.  I.e., file length and file offsets can exceed 31
     bits.

     When the sources are translated with ‘_FILE_OFFSET_BITS == 64’ this
     function is actually available under the name ‘open’.  I.e., the
     new, extended API using 64 bit file sizes and offsets transparently
     replaces the old API.

 -- Obsolete function: int creat (const char *FILENAME, mode_t MODE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe fd | *Note POSIX Safety
     Concepts::.

     This function is obsolete.  The call:

          creat (FILENAME, MODE)

     is equivalent to:

          open (FILENAME, O_WRONLY | O_CREAT | O_TRUNC, MODE)

     If on a 32 bit machine the sources are translated with
     ‘_FILE_OFFSET_BITS == 64’ the function ‘creat’ returns a file
     descriptor opened in the large file mode which enables the file
     handling functions to use files up to 2^63 in size and offset from
     −2^63 to 2^63.  This happens transparently for the user since all
     of the lowlevel file handling functions are equally replaced.

 -- Obsolete function: int creat64 (const char *FILENAME, mode_t MODE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe fd | *Note POSIX Safety
     Concepts::.

     This function is similar to ‘creat’.  It returns a file descriptor
     which can be used to access the file named by FILENAME.  The only
     the difference is that on 32 bit systems the file is opened in the
     large file mode.  I.e., file length and file offsets can exceed 31
     bits.

     To use this file descriptor one must not use the normal operations
     but instead the counterparts named ‘*64’, e.g., ‘read64’.

     When the sources are translated with ‘_FILE_OFFSET_BITS == 64’ this
     function is actually available under the name ‘open’.  I.e., the
     new, extended API using 64 bit file sizes and offsets transparently
     replaces the old API.

 -- Function: int close (int FILEDES)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe fd | *Note POSIX Safety
     Concepts::.

     The function ‘close’ closes the file descriptor FILEDES.  Closing a
     file has the following consequences:

        • The file descriptor is deallocated.

        • Any record locks owned by the process on the file are
          unlocked.

        • When all file descriptors associated with a pipe or FIFO have
          been closed, any unread data is discarded.

     This function is a cancellation point in multi-threaded programs.
     This is a problem if the thread allocates some resources (like
     memory, file descriptors, semaphores or whatever) at the time
     ‘close’ is called.  If the thread gets canceled these resources
     stay allocated until the program ends.  To avoid this, calls to
     ‘close’ should be protected using cancellation handlers.

     The normal return value from ‘close’ is 0; a value of -1 is
     returned in case of failure.  The following ‘errno’ error
     conditions are defined for this function:

     ‘EBADF’
          The FILEDES argument is not a valid file descriptor.

     ‘EINTR’
          The ‘close’ call was interrupted by a signal.  *Note
          Interrupted Primitives::.  Here is an example of how to handle
          ‘EINTR’ properly:

               TEMP_FAILURE_RETRY (close (desc));

     ‘ENOSPC’
     ‘EIO’
     ‘EDQUOT’
          When the file is accessed by NFS, these errors from ‘write’
          can sometimes not be detected until ‘close’.  *Note I/O
          Primitives::, for details on their meaning.

     Please note that there is _no_ separate ‘close64’ function.  This
     is not necessary since this function does not determine nor depend
     on the mode of the file.  The kernel which performs the ‘close’
     operation knows which mode the descriptor is used for and can
     handle this situation.

   To close a stream, call ‘fclose’ (*note Closing Streams::) instead of
trying to close its underlying file descriptor with ‘close’.  This
flushes any buffered output and updates the stream object to indicate
that it is closed.


File: libc.info,  Node: I/O Primitives,  Next: File Position Primitive,  Prev: Opening and Closing Files,  Up: Low-Level I/O

13.2 Input and Output Primitives
================================

This section describes the functions for performing primitive input and
output operations on file descriptors: ‘read’, ‘write’, and ‘lseek’.
These functions are declared in the header file ‘unistd.h’.

 -- Data Type: ssize_t
     This data type is used to represent the sizes of blocks that can be
     read or written in a single operation.  It is similar to ‘size_t’,
     but must be a signed type.

 -- Function: ssize_t read (int FILEDES, void *BUFFER, size_t SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘read’ function reads up to SIZE bytes from the file with
     descriptor FILEDES, storing the results in the BUFFER.  (This is
     not necessarily a character string, and no terminating null
     character is added.)

     The return value is the number of bytes actually read.  This might
     be less than SIZE; for example, if there aren’t that many bytes
     left in the file or if there aren’t that many bytes immediately
     available.  The exact behavior depends on what kind of file it is.
     Note that reading less than SIZE bytes is not an error.

     A value of zero indicates end-of-file (except if the value of the
     SIZE argument is also zero).  This is not considered an error.  If
     you keep calling ‘read’ while at end-of-file, it will keep
     returning zero and doing nothing else.

     If ‘read’ returns at least one character, there is no way you can
     tell whether end-of-file was reached.  But if you did reach the
     end, the next read will return zero.

     In case of an error, ‘read’ returns -1.  The following ‘errno’
     error conditions are defined for this function:

     ‘EAGAIN’
          Normally, when no input is immediately available, ‘read’ waits
          for some input.  But if the ‘O_NONBLOCK’ flag is set for the
          file (*note File Status Flags::), ‘read’ returns immediately
          without reading any data, and reports this error.

          *Compatibility Note:* Most versions of BSD Unix use a
          different error code for this: ‘EWOULDBLOCK’.  In the GNU C
          Library, ‘EWOULDBLOCK’ is an alias for ‘EAGAIN’, so it doesn’t
          matter which name you use.

          On some systems, reading a large amount of data from a
          character special file can also fail with ‘EAGAIN’ if the
          kernel cannot find enough physical memory to lock down the
          user’s pages.  This is limited to devices that transfer with
          direct memory access into the user’s memory, which means it
          does not include terminals, since they always use separate
          buffers inside the kernel.  This problem never happens on
          GNU/Hurd systems.

          Any condition that could result in ‘EAGAIN’ can instead result
          in a successful ‘read’ which returns fewer bytes than
          requested.  Calling ‘read’ again immediately would result in
          ‘EAGAIN’.

     ‘EBADF’
          The FILEDES argument is not a valid file descriptor, or is not
          open for reading.

     ‘EINTR’
          ‘read’ was interrupted by a signal while it was waiting for
          input.  *Note Interrupted Primitives::.  A signal will not
          necessary cause ‘read’ to return ‘EINTR’; it may instead
          result in a successful ‘read’ which returns fewer bytes than
          requested.

     ‘EIO’
          For many devices, and for disk files, this error code
          indicates a hardware error.

          ‘EIO’ also occurs when a background process tries to read from
          the controlling terminal, and the normal action of stopping
          the process by sending it a ‘SIGTTIN’ signal isn’t working.
          This might happen if the signal is being blocked or ignored,
          or because the process group is orphaned.  *Note Job
          Control::, for more information about job control, and *note
          Signal Handling::, for information about signals.

     ‘EINVAL’
          In some systems, when reading from a character or block
          device, position and size offsets must be aligned to a
          particular block size.  This error indicates that the offsets
          were not properly aligned.

     Please note that there is no function named ‘read64’.  This is not
     necessary since this function does not directly modify or handle
     the possibly wide file offset.  Since the kernel handles this state
     internally, the ‘read’ function can be used for all cases.

     This function is a cancellation point in multi-threaded programs.
     This is a problem if the thread allocates some resources (like
     memory, file descriptors, semaphores or whatever) at the time
     ‘read’ is called.  If the thread gets canceled these resources stay
     allocated until the program ends.  To avoid this, calls to ‘read’
     should be protected using cancellation handlers.

     The ‘read’ function is the underlying primitive for all of the
     functions that read from streams, such as ‘fgetc’.

 -- Function: ssize_t pread (int FILEDES, void *BUFFER, size_t SIZE,
          off_t OFFSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘pread’ function is similar to the ‘read’ function.  The first
     three arguments are identical, and the return values and error
     codes also correspond.

     The difference is the fourth argument and its handling.  The data
     block is not read from the current position of the file descriptor
     ‘filedes’.  Instead the data is read from the file starting at
     position OFFSET.  The position of the file descriptor itself is not
     affected by the operation.  The value is the same as before the
     call.

     When the source file is compiled with ‘_FILE_OFFSET_BITS == 64’ the
     ‘pread’ function is in fact ‘pread64’ and the type ‘off_t’ has 64
     bits, which makes it possible to handle files up to 2^63 bytes in
     length.

     The return value of ‘pread’ describes the number of bytes read.  In
     the error case it returns -1 like ‘read’ does and the error codes
     are also the same, with these additions:

     ‘EINVAL’
          The value given for OFFSET is negative and therefore illegal.

     ‘ESPIPE’
          The file descriptor FILEDES is associate with a pipe or a FIFO
          and this device does not allow positioning of the file
          pointer.

     The function is an extension defined in the Unix Single
     Specification version 2.

 -- Function: ssize_t pread64 (int FILEDES, void *BUFFER, size_t SIZE,
          off64_t OFFSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to the ‘pread’ function.  The difference
     is that the OFFSET parameter is of type ‘off64_t’ instead of
     ‘off_t’ which makes it possible on 32 bit machines to address files
     larger than 2^31 bytes and up to 2^63 bytes.  The file descriptor
     ‘filedes’ must be opened using ‘open64’ since otherwise the large
     offsets possible with ‘off64_t’ will lead to errors with a
     descriptor in small file mode.

     When the source file is compiled with ‘_FILE_OFFSET_BITS == 64’ on
     a 32 bit machine this function is actually available under the name
     ‘pread’ and so transparently replaces the 32 bit interface.

 -- Function: ssize_t write (int FILEDES, const void *BUFFER, size_t
          SIZE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘write’ function writes up to SIZE bytes from BUFFER to the
     file with descriptor FILEDES.  The data in BUFFER is not
     necessarily a character string and a null character is output like
     any other character.

     The return value is the number of bytes actually written.  This may
     be SIZE, but can always be smaller.  Your program should always
     call ‘write’ in a loop, iterating until all the data is written.

     Once ‘write’ returns, the data is enqueued to be written and can be
     read back right away, but it is not necessarily written out to
     permanent storage immediately.  You can use ‘fsync’ when you need
     to be sure your data has been permanently stored before continuing.
     (It is more efficient for the system to batch up consecutive writes
     and do them all at once when convenient.  Normally they will always
     be written to disk within a minute or less.)  Modern systems
     provide another function ‘fdatasync’ which guarantees integrity
     only for the file data and is therefore faster.  You can use the
     ‘O_FSYNC’ open mode to make ‘write’ always store the data to disk
     before returning; *note Operating Modes::.

     In the case of an error, ‘write’ returns -1.  The following ‘errno’
     error conditions are defined for this function:

     ‘EAGAIN’
          Normally, ‘write’ blocks until the write operation is
          complete.  But if the ‘O_NONBLOCK’ flag is set for the file
          (*note Control Operations::), it returns immediately without
          writing any data and reports this error.  An example of a
          situation that might cause the process to block on output is
          writing to a terminal device that supports flow control, where
          output has been suspended by receipt of a STOP character.

          *Compatibility Note:* Most versions of BSD Unix use a
          different error code for this: ‘EWOULDBLOCK’.  In the GNU C
          Library, ‘EWOULDBLOCK’ is an alias for ‘EAGAIN’, so it doesn’t
          matter which name you use.

          On some systems, writing a large amount of data from a
          character special file can also fail with ‘EAGAIN’ if the
          kernel cannot find enough physical memory to lock down the
          user’s pages.  This is limited to devices that transfer with
          direct memory access into the user’s memory, which means it
          does not include terminals, since they always use separate
          buffers inside the kernel.  This problem does not arise on
          GNU/Hurd systems.

     ‘EBADF’
          The FILEDES argument is not a valid file descriptor, or is not
          open for writing.

     ‘EFBIG’
          The size of the file would become larger than the
          implementation can support.

     ‘EINTR’
          The ‘write’ operation was interrupted by a signal while it was
          blocked waiting for completion.  A signal will not necessarily
          cause ‘write’ to return ‘EINTR’; it may instead result in a
          successful ‘write’ which writes fewer bytes than requested.
          *Note Interrupted Primitives::.

     ‘EIO’
          For many devices, and for disk files, this error code
          indicates a hardware error.

     ‘ENOSPC’
          The device containing the file is full.

     ‘EPIPE’
          This error is returned when you try to write to a pipe or FIFO
          that isn’t open for reading by any process.  When this
          happens, a ‘SIGPIPE’ signal is also sent to the process; see
          *note Signal Handling::.

     ‘EINVAL’
          In some systems, when writing to a character or block device,
          position and size offsets must be aligned to a particular
          block size.  This error indicates that the offsets were not
          properly aligned.

     Unless you have arranged to prevent ‘EINTR’ failures, you should
     check ‘errno’ after each failing call to ‘write’, and if the error
     was ‘EINTR’, you should simply repeat the call.  *Note Interrupted
     Primitives::.  The easy way to do this is with the macro
     ‘TEMP_FAILURE_RETRY’, as follows:

          nbytes = TEMP_FAILURE_RETRY (write (desc, buffer, count));

     Please note that there is no function named ‘write64’.  This is not
     necessary since this function does not directly modify or handle
     the possibly wide file offset.  Since the kernel handles this state
     internally the ‘write’ function can be used for all cases.

     This function is a cancellation point in multi-threaded programs.
     This is a problem if the thread allocates some resources (like
     memory, file descriptors, semaphores or whatever) at the time
     ‘write’ is called.  If the thread gets canceled these resources
     stay allocated until the program ends.  To avoid this, calls to
     ‘write’ should be protected using cancellation handlers.

     The ‘write’ function is the underlying primitive for all of the
     functions that write to streams, such as ‘fputc’.

 -- Function: ssize_t pwrite (int FILEDES, const void *BUFFER, size_t
          SIZE, off_t OFFSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘pwrite’ function is similar to the ‘write’ function.  The
     first three arguments are identical, and the return values and
     error codes also correspond.

     The difference is the fourth argument and its handling.  The data
     block is not written to the current position of the file descriptor
     ‘filedes’.  Instead the data is written to the file starting at
     position OFFSET.  The position of the file descriptor itself is not
     affected by the operation.  The value is the same as before the
     call.

     When the source file is compiled with ‘_FILE_OFFSET_BITS == 64’ the
     ‘pwrite’ function is in fact ‘pwrite64’ and the type ‘off_t’ has 64
     bits, which makes it possible to handle files up to 2^63 bytes in
     length.

     The return value of ‘pwrite’ describes the number of written bytes.
     In the error case it returns -1 like ‘write’ does and the error
     codes are also the same, with these additions:

     ‘EINVAL’
          The value given for OFFSET is negative and therefore illegal.

     ‘ESPIPE’
          The file descriptor FILEDES is associated with a pipe or a
          FIFO and this device does not allow positioning of the file
          pointer.

     The function is an extension defined in the Unix Single
     Specification version 2.

 -- Function: ssize_t pwrite64 (int FILEDES, const void *BUFFER, size_t
          SIZE, off64_t OFFSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to the ‘pwrite’ function.  The difference
     is that the OFFSET parameter is of type ‘off64_t’ instead of
     ‘off_t’ which makes it possible on 32 bit machines to address files
     larger than 2^31 bytes and up to 2^63 bytes.  The file descriptor
     ‘filedes’ must be opened using ‘open64’ since otherwise the large
     offsets possible with ‘off64_t’ will lead to errors with a
     descriptor in small file mode.

     When the source file is compiled using ‘_FILE_OFFSET_BITS == 64’ on
     a 32 bit machine this function is actually available under the name
     ‘pwrite’ and so transparently replaces the 32 bit interface.


File: libc.info,  Node: File Position Primitive,  Next: Descriptors and Streams,  Prev: I/O Primitives,  Up: Low-Level I/O

13.3 Setting the File Position of a Descriptor
==============================================

Just as you can set the file position of a stream with ‘fseek’, you can
set the file position of a descriptor with ‘lseek’.  This specifies the
position in the file for the next ‘read’ or ‘write’ operation.  *Note
File Positioning::, for more information on the file position and what
it means.

   To read the current file position value from a descriptor, use ‘lseek
(DESC, 0, SEEK_CUR)’.

 -- Function: off_t lseek (int FILEDES, off_t OFFSET, int WHENCE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘lseek’ function is used to change the file position of the
     file with descriptor FILEDES.

     The WHENCE argument specifies how the OFFSET should be interpreted,
     in the same way as for the ‘fseek’ function, and it must be one of
     the symbolic constants ‘SEEK_SET’, ‘SEEK_CUR’, or ‘SEEK_END’.

     ‘SEEK_SET’
          Specifies that OFFSET is a count of characters from the
          beginning of the file.

     ‘SEEK_CUR’
          Specifies that OFFSET is a count of characters from the
          current file position.  This count may be positive or
          negative.

     ‘SEEK_END’
          Specifies that OFFSET is a count of characters from the end of
          the file.  A negative count specifies a position within the
          current extent of the file; a positive count specifies a
          position past the current end.  If you set the position past
          the current end, and actually write data, you will extend the
          file with zeros up to that position.

     The return value from ‘lseek’ is normally the resulting file
     position, measured in bytes from the beginning of the file.  You
     can use this feature together with ‘SEEK_CUR’ to read the current
     file position.

     If you want to append to the file, setting the file position to the
     current end of file with ‘SEEK_END’ is not sufficient.  Another
     process may write more data after you seek but before you write,
     extending the file so the position you write onto clobbers their
     data.  Instead, use the ‘O_APPEND’ operating mode; *note Operating
     Modes::.

     You can set the file position past the current end of the file.
     This does not by itself make the file longer; ‘lseek’ never changes
     the file.  But subsequent output at that position will extend the
     file.  Characters between the previous end of file and the new
     position are filled with zeros.  Extending the file in this way can
     create a “hole”: the blocks of zeros are not actually allocated on
     disk, so the file takes up less space than it appears to; it is
     then called a “sparse file”.

     If the file position cannot be changed, or the operation is in some
     way invalid, ‘lseek’ returns a value of -1.  The following ‘errno’
     error conditions are defined for this function:

     ‘EBADF’
          The FILEDES is not a valid file descriptor.

     ‘EINVAL’
          The WHENCE argument value is not valid, or the resulting file
          offset is not valid.  A file offset is invalid.

     ‘ESPIPE’
          The FILEDES corresponds to an object that cannot be
          positioned, such as a pipe, FIFO or terminal device.  (POSIX.1
          specifies this error only for pipes and FIFOs, but on GNU
          systems, you always get ‘ESPIPE’ if the object is not
          seekable.)

     When the source file is compiled with ‘_FILE_OFFSET_BITS == 64’ the
     ‘lseek’ function is in fact ‘lseek64’ and the type ‘off_t’ has 64
     bits which makes it possible to handle files up to 2^63 bytes in
     length.

     This function is a cancellation point in multi-threaded programs.
     This is a problem if the thread allocates some resources (like
     memory, file descriptors, semaphores or whatever) at the time
     ‘lseek’ is called.  If the thread gets canceled these resources
     stay allocated until the program ends.  To avoid this calls to
     ‘lseek’ should be protected using cancellation handlers.

     The ‘lseek’ function is the underlying primitive for the ‘fseek’,
     ‘fseeko’, ‘ftell’, ‘ftello’ and ‘rewind’ functions, which operate
     on streams instead of file descriptors.

 -- Function: off64_t lseek64 (int FILEDES, off64_t OFFSET, int WHENCE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to the ‘lseek’ function.  The difference
     is that the OFFSET parameter is of type ‘off64_t’ instead of
     ‘off_t’ which makes it possible on 32 bit machines to address files
     larger than 2^31 bytes and up to 2^63 bytes.  The file descriptor
     ‘filedes’ must be opened using ‘open64’ since otherwise the large
     offsets possible with ‘off64_t’ will lead to errors with a
     descriptor in small file mode.

     When the source file is compiled with ‘_FILE_OFFSET_BITS == 64’ on
     a 32 bits machine this function is actually available under the
     name ‘lseek’ and so transparently replaces the 32 bit interface.

   You can have multiple descriptors for the same file if you open the
file more than once, or if you duplicate a descriptor with ‘dup’.
Descriptors that come from separate calls to ‘open’ have independent
file positions; using ‘lseek’ on one descriptor has no effect on the
other.  For example,

     {
       int d1, d2;
       char buf[4];
       d1 = open ("foo", O_RDONLY);
       d2 = open ("foo", O_RDONLY);
       lseek (d1, 1024, SEEK_SET);
       read (d2, buf, 4);
     }

will read the first four characters of the file ‘foo’.  (The
error-checking code necessary for a real program has been omitted here
for brevity.)

   By contrast, descriptors made by duplication share a common file
position with the original descriptor that was duplicated.  Anything
which alters the file position of one of the duplicates, including
reading or writing data, affects all of them alike.  Thus, for example,

     {
       int d1, d2, d3;
       char buf1[4], buf2[4];
       d1 = open ("foo", O_RDONLY);
       d2 = dup (d1);
       d3 = dup (d2);
       lseek (d3, 1024, SEEK_SET);
       read (d1, buf1, 4);
       read (d2, buf2, 4);
     }

will read four characters starting with the 1024’th character of ‘foo’,
and then four more characters starting with the 1028’th character.

 -- Data Type: off_t
     This is a signed integer type used to represent file sizes.  In the
     GNU C Library, this type is no narrower than ‘int’.

     If the source is compiled with ‘_FILE_OFFSET_BITS == 64’ this type
     is transparently replaced by ‘off64_t’.

 -- Data Type: off64_t
     This type is used similar to ‘off_t’.  The difference is that even
     on 32 bit machines, where the ‘off_t’ type would have 32 bits,
     ‘off64_t’ has 64 bits and so is able to address files up to 2^63
     bytes in length.

     When compiling with ‘_FILE_OFFSET_BITS == 64’ this type is
     available under the name ‘off_t’.

   These aliases for the ‘SEEK_…’ constants exist for the sake of
compatibility with older BSD systems.  They are defined in two different
header files: ‘fcntl.h’ and ‘sys/file.h’.

‘L_SET’
     An alias for ‘SEEK_SET’.

‘L_INCR’
     An alias for ‘SEEK_CUR’.

‘L_XTND’
     An alias for ‘SEEK_END’.


File: libc.info,  Node: Descriptors and Streams,  Next: Stream/Descriptor Precautions,  Prev: File Position Primitive,  Up: Low-Level I/O

13.4 Descriptors and Streams
============================

Given an open file descriptor, you can create a stream for it with the
‘fdopen’ function.  You can get the underlying file descriptor for an
existing stream with the ‘fileno’ function.  These functions are
declared in the header file ‘stdio.h’.

 -- Function: FILE * fdopen (int FILEDES, const char *OPENTYPE)
     Preliminary: | MT-Safe | AS-Unsafe heap lock | AC-Unsafe mem lock |
     *Note POSIX Safety Concepts::.

     The ‘fdopen’ function returns a new stream for the file descriptor
     FILEDES.

     The OPENTYPE argument is interpreted in the same way as for the
     ‘fopen’ function (*note Opening Streams::), except that the ‘b’
     option is not permitted; this is because GNU systems make no
     distinction between text and binary files.  Also, ‘"w"’ and ‘"w+"’
     do not cause truncation of the file; these have an effect only when
     opening a file, and in this case the file has already been opened.
     You must make sure that the OPENTYPE argument matches the actual
     mode of the open file descriptor.

     The return value is the new stream.  If the stream cannot be
     created (for example, if the modes for the file indicated by the
     file descriptor do not permit the access specified by the OPENTYPE
     argument), a null pointer is returned instead.

     In some other systems, ‘fdopen’ may fail to detect that the modes
     for file descriptor do not permit the access specified by
     ‘opentype’.  The GNU C Library always checks for this.

   For an example showing the use of the ‘fdopen’ function, see *note
Creating a Pipe::.

 -- Function: int fileno (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function returns the file descriptor associated with the
     stream STREAM.  If an error is detected (for example, if the STREAM
     is not valid) or if STREAM does not do I/O to a file, ‘fileno’
     returns -1.

 -- Function: int fileno_unlocked (FILE *STREAM)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘fileno_unlocked’ function is equivalent to the ‘fileno’
     function except that it does not implicitly lock the stream if the
     state is ‘FSETLOCKING_INTERNAL’.

     This function is a GNU extension.

   There are also symbolic constants defined in ‘unistd.h’ for the file
descriptors belonging to the standard streams ‘stdin’, ‘stdout’, and
‘stderr’; see *note Standard Streams::.

‘STDIN_FILENO’
     This macro has value ‘0’, which is the file descriptor for standard
     input.

‘STDOUT_FILENO’
     This macro has value ‘1’, which is the file descriptor for standard
     output.

‘STDERR_FILENO’
     This macro has value ‘2’, which is the file descriptor for standard
     error output.


File: libc.info,  Node: Stream/Descriptor Precautions,  Next: Scatter-Gather,  Prev: Descriptors and Streams,  Up: Low-Level I/O

13.5 Dangers of Mixing Streams and Descriptors
==============================================

You can have multiple file descriptors and streams (let’s call both
streams and descriptors “channels” for short) connected to the same
file, but you must take care to avoid confusion between channels.  There
are two cases to consider: "linked" channels that share a single file
position value, and "independent" channels that have their own file
positions.

   It’s best to use just one channel in your program for actual data
transfer to any given file, except when all the access is for input.
For example, if you open a pipe (something you can only do at the file
descriptor level), either do all I/O with the descriptor, or construct a
stream from the descriptor with ‘fdopen’ and then do all I/O with the
stream.

* Menu:

* Linked Channels::	   Dealing with channels sharing a file position.
* Independent Channels::   Dealing with separately opened, unlinked channels.
* Cleaning Streams::	   Cleaning a stream makes it safe to use
                            another channel.


File: libc.info,  Node: Linked Channels,  Next: Independent Channels,  Up: Stream/Descriptor Precautions

13.5.1 Linked Channels
----------------------

Channels that come from a single opening share the same file position;
we call them "linked" channels.  Linked channels result when you make a
stream from a descriptor using ‘fdopen’, when you get a descriptor from
a stream with ‘fileno’, when you copy a descriptor with ‘dup’ or ‘dup2’,
and when descriptors are inherited during ‘fork’.  For files that don’t
support random access, such as terminals and pipes, _all_ channels are
effectively linked.  On random-access files, all append-type output
streams are effectively linked to each other.

   If you have been using a stream for I/O (or have just opened the
stream), and you want to do I/O using another channel (either a stream
or a descriptor) that is linked to it, you must first "clean up" the
stream that you have been using.  *Note Cleaning Streams::.

   Terminating a process, or executing a new program in the process,
destroys all the streams in the process.  If descriptors linked to these
streams persist in other processes, their file positions become
undefined as a result.  To prevent this, you must clean up the streams
before destroying them.


File: libc.info,  Node: Independent Channels,  Next: Cleaning Streams,  Prev: Linked Channels,  Up: Stream/Descriptor Precautions

13.5.2 Independent Channels
---------------------------

When you open channels (streams or descriptors) separately on a seekable
file, each channel has its own file position.  These are called
"independent channels".

   The system handles each channel independently.  Most of the time,
this is quite predictable and natural (especially for input): each
channel can read or write sequentially at its own place in the file.
However, if some of the channels are streams, you must take these
precautions:

   • You should clean an output stream after use, before doing anything
     else that might read or write from the same part of the file.

   • You should clean an input stream before reading data that may have
     been modified using an independent channel.  Otherwise, you might
     read obsolete data that had been in the stream’s buffer.

   If you do output to one channel at the end of the file, this will
certainly leave the other independent channels positioned somewhere
before the new end.  You cannot reliably set their file positions to the
new end of file before writing, because the file can always be extended
by another process between when you set the file position and when you
write the data.  Instead, use an append-type descriptor or stream; they
always output at the current end of the file.  In order to make the
end-of-file position accurate, you must clean the output channel you
were using, if it is a stream.

   It’s impossible for two channels to have separate file pointers for a
file that doesn’t support random access.  Thus, channels for reading or
writing such files are always linked, never independent.  Append-type
channels are also always linked.  For these channels, follow the rules
for linked channels; see *note Linked Channels::.


File: libc.info,  Node: Cleaning Streams,  Prev: Independent Channels,  Up: Stream/Descriptor Precautions

13.5.3 Cleaning Streams
-----------------------

You can use ‘fflush’ to clean a stream in most cases.

   You can skip the ‘fflush’ if you know the stream is already clean.  A
stream is clean whenever its buffer is empty.  For example, an
unbuffered stream is always clean.  An input stream that is at
end-of-file is clean.  A line-buffered stream is clean when the last
character output was a newline.  However, a just-opened input stream
might not be clean, as its input buffer might not be empty.

   There is one case in which cleaning a stream is impossible on most
systems.  This is when the stream is doing input from a file that is not
random-access.  Such streams typically read ahead, and when the file is
not random access, there is no way to give back the excess data already
read.  When an input stream reads from a random-access file, ‘fflush’
does clean the stream, but leaves the file pointer at an unpredictable
place; you must set the file pointer before doing any further I/O.

   Closing an output-only stream also does ‘fflush’, so this is a valid
way of cleaning an output stream.

   You need not clean a stream before using its descriptor for control
operations such as setting terminal modes; these operations don’t affect
the file position and are not affected by it.  You can use any
descriptor for these operations, and all channels are affected
simultaneously.  However, text already “output” to a stream but still
buffered by the stream will be subject to the new terminal modes when
subsequently flushed.  To make sure “past” output is covered by the
terminal settings that were in effect at the time, flush the output
streams for that terminal before setting the modes.  *Note Terminal
Modes::.


File: libc.info,  Node: Scatter-Gather,  Next: Memory-mapped I/O,  Prev: Stream/Descriptor Precautions,  Up: Low-Level I/O

13.6 Fast Scatter-Gather I/O
============================

Some applications may need to read or write data to multiple buffers,
which are separated in memory.  Although this can be done easily enough
with multiple calls to ‘read’ and ‘write’, it is inefficient because
there is overhead associated with each kernel call.

   Instead, many platforms provide special high-speed primitives to
perform these "scatter-gather" operations in a single kernel call.  The
GNU C Library will provide an emulation on any system that lacks these
primitives, so they are not a portability threat.  They are defined in
‘sys/uio.h’.

   These functions are controlled with arrays of ‘iovec’ structures,
which describe the location and size of each buffer.

 -- Data Type: struct iovec

     The ‘iovec’ structure describes a buffer.  It contains two fields:

     ‘void *iov_base’
          Contains the address of a buffer.

     ‘size_t iov_len’
          Contains the length of the buffer.

 -- Function: ssize_t readv (int FILEDES, const struct iovec *VECTOR,
          int COUNT)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The ‘readv’ function reads data from FILEDES and scatters it into
     the buffers described in VECTOR, which is taken to be COUNT
     structures long.  As each buffer is filled, data is sent to the
     next.

     Note that ‘readv’ is not guaranteed to fill all the buffers.  It
     may stop at any point, for the same reasons ‘read’ would.

     The return value is a count of bytes (_not_ buffers) read, 0
     indicating end-of-file, or -1 indicating an error.  The possible
     errors are the same as in ‘read’.

 -- Function: ssize_t writev (int FILEDES, const struct iovec *VECTOR,
          int COUNT)
     Preliminary: | MT-Safe | AS-Unsafe heap | AC-Unsafe mem | *Note
     POSIX Safety Concepts::.

     The ‘writev’ function gathers data from the buffers described in
     VECTOR, which is taken to be COUNT structures long, and writes them
     to ‘filedes’.  As each buffer is written, it moves on to the next.

     Like ‘readv’, ‘writev’ may stop midstream under the same conditions
     ‘write’ would.

     The return value is a count of bytes written, or -1 indicating an
     error.  The possible errors are the same as in ‘write’.

   Note that if the buffers are small (under about 1kB), high-level
streams may be easier to use than these functions.  However, ‘readv’ and
‘writev’ are more efficient when the individual buffers themselves (as
opposed to the total output), are large.  In that case, a high-level
stream would not be able to cache the data effectively.


File: libc.info,  Node: Memory-mapped I/O,  Next: Waiting for I/O,  Prev: Scatter-Gather,  Up: Low-Level I/O

13.7 Memory-mapped I/O
======================

On modern operating systems, it is possible to "mmap" (pronounced
“em-map”) a file to a region of memory.  When this is done, the file can
be accessed just like an array in the program.

   This is more efficient than ‘read’ or ‘write’, as only the regions of
the file that a program actually accesses are loaded.  Accesses to
not-yet-loaded parts of the mmapped region are handled in the same way
as swapped out pages.

   Since mmapped pages can be stored back to their file when physical
memory is low, it is possible to mmap files orders of magnitude larger
than both the physical memory _and_ swap space.  The only limit is
address space.  The theoretical limit is 4GB on a 32-bit machine -
however, the actual limit will be smaller since some areas will be
reserved for other purposes.  If the LFS interface is used the file size
on 32-bit systems is not limited to 2GB (offsets are signed which
reduces the addressable area of 4GB by half); the full 64-bit are
available.

   Memory mapping only works on entire pages of memory.  Thus, addresses
for mapping must be page-aligned, and length values will be rounded up.
To determine the size of a page the machine uses one should use

     size_t page_size = (size_t) sysconf (_SC_PAGESIZE);

These functions are declared in ‘sys/mman.h’.

 -- Function: void * mmap (void *ADDRESS, size_t LENGTH, int PROTECT,
          int FLAGS, int FILEDES, off_t OFFSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘mmap’ function creates a new mapping, connected to bytes
     (OFFSET) to (OFFSET + LENGTH - 1) in the file open on FILEDES.  A
     new reference for the file specified by FILEDES is created, which
     is not removed by closing the file.

     ADDRESS gives a preferred starting address for the mapping.  ‘NULL’
     expresses no preference.  Any previous mapping at that address is
     automatically removed.  The address you give may still be changed,
     unless you use the ‘MAP_FIXED’ flag.

     PROTECT contains flags that control what kind of access is
     permitted.  They include ‘PROT_READ’, ‘PROT_WRITE’, and
     ‘PROT_EXEC’, which permit reading, writing, and execution,
     respectively.  Inappropriate access will cause a segfault (*note
     Program Error Signals::).

     Note that most hardware designs cannot support write permission
     without read permission, and many do not distinguish read and
     execute permission.  Thus, you may receive wider permissions than
     you ask for, and mappings of write-only files may be denied even if
     you do not use ‘PROT_READ’.

     FLAGS contains flags that control the nature of the map.  One of
     ‘MAP_SHARED’ or ‘MAP_PRIVATE’ must be specified.

     They include:

     ‘MAP_PRIVATE’
          This specifies that writes to the region should never be
          written back to the attached file.  Instead, a copy is made
          for the process, and the region will be swapped normally if
          memory runs low.  No other process will see the changes.

          Since private mappings effectively revert to ordinary memory
          when written to, you must have enough virtual memory for a
          copy of the entire mmapped region if you use this mode with
          ‘PROT_WRITE’.

     ‘MAP_SHARED’
          This specifies that writes to the region will be written back
          to the file.  Changes made will be shared immediately with
          other processes mmaping the same file.

          Note that actual writing may take place at any time.  You need
          to use ‘msync’, described below, if it is important that other
          processes using conventional I/O get a consistent view of the
          file.

     ‘MAP_FIXED’
          This forces the system to use the exact mapping address
          specified in ADDRESS and fail if it can’t.

     ‘MAP_ANONYMOUS’
     ‘MAP_ANON’
          This flag tells the system to create an anonymous mapping, not
          connected to a file.  FILEDES and OFF are ignored, and the
          region is initialized with zeros.

          Anonymous maps are used as the basic primitive to extend the
          heap on some systems.  They are also useful to share data
          between multiple tasks without creating a file.

          On some systems using private anonymous mmaps is more
          efficient than using ‘malloc’ for large blocks.  This is not
          an issue with the GNU C Library, as the included ‘malloc’
          automatically uses ‘mmap’ where appropriate.

     ‘mmap’ returns the address of the new mapping, or ‘MAP_FAILED’ for
     an error.

     Possible errors include:

     ‘EINVAL’

          Either ADDRESS was unusable, or inconsistent FLAGS were given.

     ‘EACCES’

          FILEDES was not open for the type of access specified in
          PROTECT.

     ‘ENOMEM’

          Either there is not enough memory for the operation, or the
          process is out of address space.

     ‘ENODEV’

          This file is of a type that doesn’t support mapping.

     ‘ENOEXEC’

          The file is on a filesystem that doesn’t support mapping.

 -- Function: void * mmap64 (void *ADDRESS, size_t LENGTH, int PROTECT,
          int FLAGS, int FILEDES, off64_t OFFSET)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘mmap64’ function is equivalent to the ‘mmap’ function but the
     OFFSET parameter is of type ‘off64_t’.  On 32-bit systems this
     allows the file associated with the FILEDES descriptor to be larger
     than 2GB. FILEDES must be a descriptor returned from a call to
     ‘open64’ or ‘fopen64’ and ‘freopen64’ where the descriptor is
     retrieved with ‘fileno’.

     When the sources are translated with ‘_FILE_OFFSET_BITS == 64’ this
     function is actually available under the name ‘mmap’.  I.e., the
     new, extended API using 64 bit file sizes and offsets transparently
     replaces the old API.

 -- Function: int munmap (void *ADDR, size_t LENGTH)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     ‘munmap’ removes any memory maps from (ADDR) to (ADDR + LENGTH).
     LENGTH should be the length of the mapping.

     It is safe to unmap multiple mappings in one command, or include
     unmapped space in the range.  It is also possible to unmap only
     part of an existing mapping.  However, only entire pages can be
     removed.  If LENGTH is not an even number of pages, it will be
     rounded up.

     It returns 0 for success and -1 for an error.

     One error is possible:

     ‘EINVAL’
          The memory range given was outside the user mmap range or
          wasn’t page aligned.

 -- Function: int msync (void *ADDRESS, size_t LENGTH, int FLAGS)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     When using shared mappings, the kernel can write the file at any
     time before the mapping is removed.  To be certain data has
     actually been written to the file and will be accessible to
     non-memory-mapped I/O, it is necessary to use this function.

     It operates on the region ADDRESS to (ADDRESS + LENGTH).  It may be
     used on part of a mapping or multiple mappings, however the region
     given should not contain any unmapped space.

     FLAGS can contain some options:

     ‘MS_SYNC’

          This flag makes sure the data is actually written _to disk_.
          Normally ‘msync’ only makes sure that accesses to a file with
          conventional I/O reflect the recent changes.

     ‘MS_ASYNC’

          This tells ‘msync’ to begin the synchronization, but not to
          wait for it to complete.

     ‘msync’ returns 0 for success and -1 for error.  Errors include:

     ‘EINVAL’
          An invalid region was given, or the FLAGS were invalid.

     ‘EFAULT’
          There is no existing mapping in at least part of the given
          region.

 -- Function: void * mremap (void *ADDRESS, size_t LENGTH, size_t
          NEW_LENGTH, int FLAG)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function can be used to change the size of an existing memory
     area.  ADDRESS and LENGTH must cover a region entirely mapped in
     the same ‘mmap’ statement.  A new mapping with the same
     characteristics will be returned with the length NEW_LENGTH.

     One option is possible, ‘MREMAP_MAYMOVE’.  If it is given in FLAGS,
     the system may remove the existing mapping and create a new one of
     the desired length in another location.

     The address of the resulting mapping is returned, or -1.  Possible
     error codes include:

     ‘EFAULT’
          There is no existing mapping in at least part of the original
          region, or the region covers two or more distinct mappings.

     ‘EINVAL’
          The address given is misaligned or inappropriate.

     ‘EAGAIN’
          The region has pages locked, and if extended it would exceed
          the process’s resource limit for locked pages.  *Note Limits
          on Resources::.

     ‘ENOMEM’
          The region is private writable, and insufficient virtual
          memory is available to extend it.  Also, this error will occur
          if ‘MREMAP_MAYMOVE’ is not given and the extension would
          collide with another mapped region.

   This function is only available on a few systems.  Except for
performing optional optimizations one should not rely on this function.

   Not all file descriptors may be mapped.  Sockets, pipes, and most
devices only allow sequential access and do not fit into the mapping
abstraction.  In addition, some regular files may not be mmapable, and
older kernels may not support mapping at all.  Thus, programs using
‘mmap’ should have a fallback method to use should it fail.  *Note
(standards)Mmap::.

 -- Function: int madvise (void *ADDR, size_t LENGTH, int ADVICE)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function can be used to provide the system with ADVICE about
     the intended usage patterns of the memory region starting at ADDR
     and extending LENGTH bytes.

     The valid BSD values for ADVICE are:

     ‘MADV_NORMAL’
          The region should receive no further special treatment.

     ‘MADV_RANDOM’
          The region will be accessed via random page references.  The
          kernel should page-in the minimal number of pages for each
          page fault.

     ‘MADV_SEQUENTIAL’
          The region will be accessed via sequential page references.
          This may cause the kernel to aggressively read-ahead,
          expecting further sequential references after any page fault
          within this region.

     ‘MADV_WILLNEED’
          The region will be needed.  The pages within this region may
          be pre-faulted in by the kernel.

     ‘MADV_DONTNEED’
          The region is no longer needed.  The kernel may free these
          pages, causing any changes to the pages to be lost, as well as
          swapped out pages to be discarded.

     The POSIX names are slightly different, but with the same meanings:

     ‘POSIX_MADV_NORMAL’
          This corresponds with BSD’s ‘MADV_NORMAL’.

     ‘POSIX_MADV_RANDOM’
          This corresponds with BSD’s ‘MADV_RANDOM’.

     ‘POSIX_MADV_SEQUENTIAL’
          This corresponds with BSD’s ‘MADV_SEQUENTIAL’.

     ‘POSIX_MADV_WILLNEED’
          This corresponds with BSD’s ‘MADV_WILLNEED’.

     ‘POSIX_MADV_DONTNEED’
          This corresponds with BSD’s ‘MADV_DONTNEED’.

     ‘madvise’ returns 0 for success and -1 for error.  Errors include:

     ‘EINVAL’
          An invalid region was given, or the ADVICE was invalid.

     ‘EFAULT’
          There is no existing mapping in at least part of the given
          region.

 -- Function: int shm_open (const char *NAME, int OFLAG, mode_t MODE)
     Preliminary: | MT-Safe locale | AS-Unsafe init heap lock |
     AC-Unsafe lock mem fd | *Note POSIX Safety Concepts::.

     This function returns a file descriptor that can be used to
     allocate shared memory via mmap.  Unrelated processes can use same
     NAME to create or open existing shared memory objects.

     A NAME argument specifies the shared memory object to be opened.
     In the GNU C Library it must be a string smaller than ‘NAME_MAX’
     bytes starting with an optional slash but containing no other
     slashes.

     The semantics of OFLAG and MODE arguments is same as in ‘open’.

     ‘shm_open’ returns the file descriptor on success or -1 on error.
     On failure ‘errno’ is set.

 -- Function: int shm_unlink (const char *NAME)
     Preliminary: | MT-Safe locale | AS-Unsafe init heap lock |
     AC-Unsafe lock mem fd | *Note POSIX Safety Concepts::.

     This function is inverse of ‘shm_open’ and removes the object with
     the given NAME previously created by ‘shm_open’.

     ‘shm_unlink’ returns 0 on success or -1 on error.  On failure
     ‘errno’ is set.


File: libc.info,  Node: Waiting for I/O,  Next: Synchronizing I/O,  Prev: Memory-mapped I/O,  Up: Low-Level I/O

13.8 Waiting for Input or Output
================================

Sometimes a program needs to accept input on multiple input channels
whenever input arrives.  For example, some workstations may have devices
such as a digitizing tablet, function button box, or dial box that are
connected via normal asynchronous serial interfaces; good user interface
style requires responding immediately to input on any device.  Another
example is a program that acts as a server to several other processes
via pipes or sockets.

   You cannot normally use ‘read’ for this purpose, because this blocks
the program until input is available on one particular file descriptor;
input on other channels won’t wake it up.  You could set nonblocking
mode and poll each file descriptor in turn, but this is very
inefficient.

   A better solution is to use the ‘select’ function.  This blocks the
program until input or output is ready on a specified set of file
descriptors, or until a timer expires, whichever comes first.  This
facility is declared in the header file ‘sys/types.h’.

   In the case of a server socket (*note Listening::), we say that
“input” is available when there are pending connections that could be
accepted (*note Accepting Connections::).  ‘accept’ for server sockets
blocks and interacts with ‘select’ just as ‘read’ does for normal input.

   The file descriptor sets for the ‘select’ function are specified as
‘fd_set’ objects.  Here is the description of the data type and some
macros for manipulating these objects.

 -- Data Type: fd_set
     The ‘fd_set’ data type represents file descriptor sets for the
     ‘select’ function.  It is actually a bit array.

 -- Macro: int FD_SETSIZE
     The value of this macro is the maximum number of file descriptors
     that a ‘fd_set’ object can hold information about.  On systems with
     a fixed maximum number, ‘FD_SETSIZE’ is at least that number.  On
     some systems, including GNU, there is no absolute limit on the
     number of descriptors open, but this macro still has a constant
     value which controls the number of bits in an ‘fd_set’; if you get
     a file descriptor with a value as high as ‘FD_SETSIZE’, you cannot
     put that descriptor into an ‘fd_set’.

 -- Macro: void FD_ZERO (fd_set *SET)
     Preliminary: | MT-Safe race:set | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This macro initializes the file descriptor set SET to be the empty
     set.

 -- Macro: void FD_SET (int FILEDES, fd_set *SET)
     Preliminary: | MT-Safe race:set | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This macro adds FILEDES to the file descriptor set SET.

     The FILEDES parameter must not have side effects since it is
     evaluated more than once.

 -- Macro: void FD_CLR (int FILEDES, fd_set *SET)
     Preliminary: | MT-Safe race:set | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This macro removes FILEDES from the file descriptor set SET.

     The FILEDES parameter must not have side effects since it is
     evaluated more than once.

 -- Macro: int FD_ISSET (int FILEDES, const fd_set *SET)
     Preliminary: | MT-Safe race:set | AS-Safe | AC-Safe | *Note POSIX
     Safety Concepts::.

     This macro returns a nonzero value (true) if FILEDES is a member of
     the file descriptor set SET, and zero (false) otherwise.

     The FILEDES parameter must not have side effects since it is
     evaluated more than once.

   Next, here is the description of the ‘select’ function itself.

 -- Function: int select (int NFDS, fd_set *READ-FDS, fd_set *WRITE-FDS,
          fd_set *EXCEPT-FDS, struct timeval *TIMEOUT)
     Preliminary: | MT-Safe race:read-fds race:write-fds race:except-fds
     | AS-Safe | AC-Safe | *Note POSIX Safety Concepts::.

     The ‘select’ function blocks the calling process until there is
     activity on any of the specified sets of file descriptors, or until
     the timeout period has expired.

     The file descriptors specified by the READ-FDS argument are checked
     to see if they are ready for reading; the WRITE-FDS file
     descriptors are checked to see if they are ready for writing; and
     the EXCEPT-FDS file descriptors are checked for exceptional
     conditions.  You can pass a null pointer for any of these arguments
     if you are not interested in checking for that kind of condition.

     A file descriptor is considered ready for reading if a ‘read’ call
     will not block.  This usually includes the read offset being at the
     end of the file or there is an error to report.  A server socket is
     considered ready for reading if there is a pending connection which
     can be accepted with ‘accept’; *note Accepting Connections::.  A
     client socket is ready for writing when its connection is fully
     established; *note Connecting::.

     “Exceptional conditions” does not mean errors—errors are reported
     immediately when an erroneous system call is executed, and do not
     constitute a state of the descriptor.  Rather, they include
     conditions such as the presence of an urgent message on a socket.
     (*Note Sockets::, for information on urgent messages.)

     The ‘select’ function checks only the first NFDS file descriptors.
     The usual thing is to pass ‘FD_SETSIZE’ as the value of this
     argument.

     The TIMEOUT specifies the maximum time to wait.  If you pass a null
     pointer for this argument, it means to block indefinitely until one
     of the file descriptors is ready.  Otherwise, you should provide
     the time in ‘struct timeval’ format; see *note High-Resolution
     Calendar::.  Specify zero as the time (a ‘struct timeval’
     containing all zeros) if you want to find out which descriptors are
     ready without waiting if none are ready.

     The normal return value from ‘select’ is the total number of ready
     file descriptors in all of the sets.  Each of the argument sets is
     overwritten with information about the descriptors that are ready
     for the corresponding operation.  Thus, to see if a particular
     descriptor DESC has input, use ‘FD_ISSET (DESC, READ-FDS)’ after
     ‘select’ returns.

     If ‘select’ returns because the timeout period expires, it returns
     a value of zero.

     Any signal will cause ‘select’ to return immediately.  So if your
     program uses signals, you can’t rely on ‘select’ to keep waiting
     for the full time specified.  If you want to be sure of waiting for
     a particular amount of time, you must check for ‘EINTR’ and repeat
     the ‘select’ with a newly calculated timeout based on the current
     time.  See the example below.  See also *note Interrupted
     Primitives::.

     If an error occurs, ‘select’ returns ‘-1’ and does not modify the
     argument file descriptor sets.  The following ‘errno’ error
     conditions are defined for this function:

     ‘EBADF’
          One of the file descriptor sets specified an invalid file
          descriptor.

     ‘EINTR’
          The operation was interrupted by a signal.  *Note Interrupted
          Primitives::.

     ‘EINVAL’
          The TIMEOUT argument is invalid; one of the components is
          negative or too large.

   *Portability Note:* The ‘select’ function is a BSD Unix feature.

   Here is an example showing how you can use ‘select’ to establish a
timeout period for reading from a file descriptor.  The ‘input_timeout’
function blocks the calling process until input is available on the file
descriptor, or until the timeout period expires.


     #include <errno.h>
     #include <stdio.h>
     #include <unistd.h>
     #include <sys/types.h>
     #include <sys/time.h>

     int
     input_timeout (int filedes, unsigned int seconds)
     {
       fd_set set;
       struct timeval timeout;

       /* Initialize the file descriptor set. */
       FD_ZERO (&set);
       FD_SET (filedes, &set);

       /* Initialize the timeout data structure. */
       timeout.tv_sec = seconds;
       timeout.tv_usec = 0;

       /* ‘select’ returns 0 if timeout, 1 if input available, -1 if error. */
       return TEMP_FAILURE_RETRY (select (FD_SETSIZE,
                                          &set, NULL, NULL,
                                          &timeout));
     }

     int
     main (void)
     {
       fprintf (stderr, "select returned %d.\n",
                input_timeout (STDIN_FILENO, 5));
       return 0;
     }

   There is another example showing the use of ‘select’ to multiplex
input from multiple sockets in *note Server Example::.


File: libc.info,  Node: Synchronizing I/O,  Next: Asynchronous I/O,  Prev: Waiting for I/O,  Up: Low-Level I/O

13.9 Synchronizing I/O operations
=================================

In most modern operating systems, the normal I/O operations are not
executed synchronously.  I.e., even if a ‘write’ system call returns,
this does not mean the data is actually written to the media, e.g., the
disk.

   In situations where synchronization points are necessary, you can use
special functions which ensure that all operations finish before they
return.

 -- Function: void sync (void)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     A call to this function will not return as long as there is data
     which has not been written to the device.  All dirty buffers in the
     kernel will be written and so an overall consistent system can be
     achieved (if no other process in parallel writes data).

     A prototype for ‘sync’ can be found in ‘unistd.h’.

   Programs more often want to ensure that data written to a given file
is committed, rather than all data in the system.  For this, ‘sync’ is
overkill.

 -- Function: int fsync (int FILDES)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘fsync’ function can be used to make sure all data associated
     with the open file FILDES is written to the device associated with
     the descriptor.  The function call does not return unless all
     actions have finished.

     A prototype for ‘fsync’ can be found in ‘unistd.h’.

     This function is a cancellation point in multi-threaded programs.
     This is a problem if the thread allocates some resources (like
     memory, file descriptors, semaphores or whatever) at the time
     ‘fsync’ is called.  If the thread gets canceled these resources
     stay allocated until the program ends.  To avoid this, calls to
     ‘fsync’ should be protected using cancellation handlers.

     The return value of the function is zero if no error occurred.
     Otherwise it is -1 and the global variable ERRNO is set to the
     following values:
     ‘EBADF’
          The descriptor FILDES is not valid.

     ‘EINVAL’
          No synchronization is possible since the system does not
          implement this.

   Sometimes it is not even necessary to write all data associated with
a file descriptor.  E.g., in database files which do not change in size
it is enough to write all the file content data to the device.
Meta-information, like the modification time etc., are not that
important and leaving such information uncommitted does not prevent a
successful recovering of the file in case of a problem.

 -- Function: int fdatasync (int FILDES)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     When a call to the ‘fdatasync’ function returns, it is ensured that
     all of the file data is written to the device.  For all pending I/O
     operations, the parts guaranteeing data integrity finished.

     Not all systems implement the ‘fdatasync’ operation.  On systems
     missing this functionality ‘fdatasync’ is emulated by a call to
     ‘fsync’ since the performed actions are a superset of those
     required by ‘fdatasync’.

     The prototype for ‘fdatasync’ is in ‘unistd.h’.

     The return value of the function is zero if no error occurred.
     Otherwise it is -1 and the global variable ERRNO is set to the
     following values:
     ‘EBADF’
          The descriptor FILDES is not valid.

     ‘EINVAL’
          No synchronization is possible since the system does not
          implement this.


File: libc.info,  Node: Asynchronous I/O,  Next: Control Operations,  Prev: Synchronizing I/O,  Up: Low-Level I/O

13.10 Perform I/O Operations in Parallel
========================================

The POSIX.1b standard defines a new set of I/O operations which can
significantly reduce the time an application spends waiting at I/O. The
new functions allow a program to initiate one or more I/O operations and
then immediately resume normal work while the I/O operations are
executed in parallel.  This functionality is available if the ‘unistd.h’
file defines the symbol ‘_POSIX_ASYNCHRONOUS_IO’.

   These functions are part of the library with realtime functions named
‘librt’.  They are not actually part of the ‘libc’ binary.  The
implementation of these functions can be done using support in the
kernel (if available) or using an implementation based on threads at
userlevel.  In the latter case it might be necessary to link
applications with the thread library ‘libpthread’ in addition to
‘librt’.

   All AIO operations operate on files which were opened previously.
There might be arbitrarily many operations running for one file.  The
asynchronous I/O operations are controlled using a data structure named
‘struct aiocb’ ("AIO control block").  It is defined in ‘aio.h’ as
follows.

 -- Data Type: struct aiocb
     The POSIX.1b standard mandates that the ‘struct aiocb’ structure
     contains at least the members described in the following table.
     There might be more elements which are used by the implementation,
     but depending upon these elements is not portable and is highly
     deprecated.

     ‘int aio_fildes’
          This element specifies the file descriptor to be used for the
          operation.  It must be a legal descriptor, otherwise the
          operation will fail.

          The device on which the file is opened must allow the seek
          operation.  I.e., it is not possible to use any of the AIO
          operations on devices like terminals where an ‘lseek’ call
          would lead to an error.

     ‘off_t aio_offset’
          This element specifies the offset in the file at which the
          operation (input or output) is performed.  Since the
          operations are carried out in arbitrary order and more than
          one operation for one file descriptor can be started, one
          cannot expect a current read/write position of the file
          descriptor.

     ‘volatile void *aio_buf’
          This is a pointer to the buffer with the data to be written or
          the place where the read data is stored.

     ‘size_t aio_nbytes’
          This element specifies the length of the buffer pointed to by
          ‘aio_buf’.

     ‘int aio_reqprio’
          If the platform has defined ‘_POSIX_PRIORITIZED_IO’ and
          ‘_POSIX_PRIORITY_SCHEDULING’, the AIO requests are processed
          based on the current scheduling priority.  The ‘aio_reqprio’
          element can then be used to lower the priority of the AIO
          operation.

     ‘struct sigevent aio_sigevent’
          This element specifies how the calling process is notified
          once the operation terminates.  If the ‘sigev_notify’ element
          is ‘SIGEV_NONE’, no notification is sent.  If it is
          ‘SIGEV_SIGNAL’, the signal determined by ‘sigev_signo’ is
          sent.  Otherwise, ‘sigev_notify’ must be ‘SIGEV_THREAD’.  In
          this case, a thread is created which starts executing the
          function pointed to by ‘sigev_notify_function’.

     ‘int aio_lio_opcode’
          This element is only used by the ‘lio_listio’ and
          ‘lio_listio64’ functions.  Since these functions allow an
          arbitrary number of operations to start at once, and each
          operation can be input or output (or nothing), the information
          must be stored in the control block.  The possible values are:

          ‘LIO_READ’
               Start a read operation.  Read from the file at position
               ‘aio_offset’ and store the next ‘aio_nbytes’ bytes in the
               buffer pointed to by ‘aio_buf’.

          ‘LIO_WRITE’
               Start a write operation.  Write ‘aio_nbytes’ bytes
               starting at ‘aio_buf’ into the file starting at position
               ‘aio_offset’.

          ‘LIO_NOP’
               Do nothing for this control block.  This value is useful
               sometimes when an array of ‘struct aiocb’ values contains
               holes, i.e., some of the values must not be handled
               although the whole array is presented to the ‘lio_listio’
               function.

     When the sources are compiled using ‘_FILE_OFFSET_BITS == 64’ on a
     32 bit machine, this type is in fact ‘struct aiocb64’, since the
     LFS interface transparently replaces the ‘struct aiocb’ definition.

   For use with the AIO functions defined in the LFS, there is a similar
type defined which replaces the types of the appropriate members with
larger types but otherwise is equivalent to ‘struct aiocb’.
Particularly, all member names are the same.

 -- Data Type: struct aiocb64
     ‘int aio_fildes’
          This element specifies the file descriptor which is used for
          the operation.  It must be a legal descriptor since otherwise
          the operation fails for obvious reasons.

          The device on which the file is opened must allow the seek
          operation.  I.e., it is not possible to use any of the AIO
          operations on devices like terminals where an ‘lseek’ call
          would lead to an error.

     ‘off64_t aio_offset’
          This element specifies at which offset in the file the
          operation (input or output) is performed.  Since the operation
          are carried in arbitrary order and more than one operation for
          one file descriptor can be started, one cannot expect a
          current read/write position of the file descriptor.

     ‘volatile void *aio_buf’
          This is a pointer to the buffer with the data to be written or
          the place where the read data is stored.

     ‘size_t aio_nbytes’
          This element specifies the length of the buffer pointed to by
          ‘aio_buf’.

     ‘int aio_reqprio’
          If for the platform ‘_POSIX_PRIORITIZED_IO’ and
          ‘_POSIX_PRIORITY_SCHEDULING’ are defined the AIO requests are
          processed based on the current scheduling priority.  The
          ‘aio_reqprio’ element can then be used to lower the priority
          of the AIO operation.

     ‘struct sigevent aio_sigevent’
          This element specifies how the calling process is notified
          once the operation terminates.  If the ‘sigev_notify’, element
          is ‘SIGEV_NONE’ no notification is sent.  If it is
          ‘SIGEV_SIGNAL’, the signal determined by ‘sigev_signo’ is
          sent.  Otherwise, ‘sigev_notify’ must be ‘SIGEV_THREAD’ in
          which case a thread which starts executing the function
          pointed to by ‘sigev_notify_function’.

     ‘int aio_lio_opcode’
          This element is only used by the ‘lio_listio’ and
          ‘[lio_listio64’ functions.  Since these functions allow an
          arbitrary number of operations to start at once, and since
          each operation can be input or output (or nothing), the
          information must be stored in the control block.  See the
          description of ‘struct aiocb’ for a description of the
          possible values.

     When the sources are compiled using ‘_FILE_OFFSET_BITS == 64’ on a
     32 bit machine, this type is available under the name ‘struct
     aiocb64’, since the LFS transparently replaces the old interface.

* Menu:

* Asynchronous Reads/Writes::    Asynchronous Read and Write Operations.
* Status of AIO Operations::     Getting the Status of AIO Operations.
* Synchronizing AIO Operations:: Getting into a consistent state.
* Cancel AIO Operations::        Cancellation of AIO Operations.
* Configuration of AIO::         How to optimize the AIO implementation.


File: libc.info,  Node: Asynchronous Reads/Writes,  Next: Status of AIO Operations,  Up: Asynchronous I/O

13.10.1 Asynchronous Read and Write Operations
----------------------------------------------

 -- Function: int aio_read (struct aiocb *AIOCBP)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     This function initiates an asynchronous read operation.  It
     immediately returns after the operation was enqueued or when an
     error was encountered.

     The first ‘aiocbp->aio_nbytes’ bytes of the file for which
     ‘aiocbp->aio_fildes’ is a descriptor are written to the buffer
     starting at ‘aiocbp->aio_buf’.  Reading starts at the absolute
     position ‘aiocbp->aio_offset’ in the file.

     If prioritized I/O is supported by the platform the
     ‘aiocbp->aio_reqprio’ value is used to adjust the priority before
     the request is actually enqueued.

     The calling process is notified about the termination of the read
     request according to the ‘aiocbp->aio_sigevent’ value.

     When ‘aio_read’ returns, the return value is zero if no error
     occurred that can be found before the process is enqueued.  If such
     an early error is found, the function returns -1 and sets ‘errno’
     to one of the following values:

     ‘EAGAIN’
          The request was not enqueued due to (temporarily) exceeded
          resource limitations.
     ‘ENOSYS’
          The ‘aio_read’ function is not implemented.
     ‘EBADF’
          The ‘aiocbp->aio_fildes’ descriptor is not valid.  This
          condition need not be recognized before enqueueing the request
          and so this error might also be signaled asynchronously.
     ‘EINVAL’
          The ‘aiocbp->aio_offset’ or ‘aiocbp->aio_reqpiro’ value is
          invalid.  This condition need not be recognized before
          enqueueing the request and so this error might also be
          signaled asynchronously.

     If ‘aio_read’ returns zero, the current status of the request can
     be queried using ‘aio_error’ and ‘aio_return’ functions.  As long
     as the value returned by ‘aio_error’ is ‘EINPROGRESS’ the operation
     has not yet completed.  If ‘aio_error’ returns zero, the operation
     successfully terminated, otherwise the value is to be interpreted
     as an error code.  If the function terminated, the result of the
     operation can be obtained using a call to ‘aio_return’.  The
     returned value is the same as an equivalent call to ‘read’ would
     have returned.  Possible error codes returned by ‘aio_error’ are:

     ‘EBADF’
          The ‘aiocbp->aio_fildes’ descriptor is not valid.
     ‘ECANCELED’
          The operation was canceled before the operation was finished
          (*note Cancel AIO Operations::)
     ‘EINVAL’
          The ‘aiocbp->aio_offset’ value is invalid.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ this
     function is in fact ‘aio_read64’ since the LFS interface
     transparently replaces the normal implementation.

 -- Function: int aio_read64 (struct aiocb64 *AIOCBP)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     This function is similar to the ‘aio_read’ function.  The only
     difference is that on 32 bit machines, the file descriptor should
     be opened in the large file mode.  Internally, ‘aio_read64’ uses
     functionality equivalent to ‘lseek64’ (*note File Position
     Primitive::) to position the file descriptor correctly for the
     reading, as opposed to ‘lseek’ functionality used in ‘aio_read’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’, this
     function is available under the name ‘aio_read’ and so
     transparently replaces the interface for small files on 32 bit
     machines.

   To write data asynchronously to a file, there exists an equivalent
pair of functions with a very similar interface.

 -- Function: int aio_write (struct aiocb *AIOCBP)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     This function initiates an asynchronous write operation.  The
     function call immediately returns after the operation was enqueued
     or if before this happens an error was encountered.

     The first ‘aiocbp->aio_nbytes’ bytes from the buffer starting at
     ‘aiocbp->aio_buf’ are written to the file for which
     ‘aiocbp->aio_fildes’ is a descriptor, starting at the absolute
     position ‘aiocbp->aio_offset’ in the file.

     If prioritized I/O is supported by the platform, the
     ‘aiocbp->aio_reqprio’ value is used to adjust the priority before
     the request is actually enqueued.

     The calling process is notified about the termination of the read
     request according to the ‘aiocbp->aio_sigevent’ value.

     When ‘aio_write’ returns, the return value is zero if no error
     occurred that can be found before the process is enqueued.  If such
     an early error is found the function returns -1 and sets ‘errno’ to
     one of the following values.

     ‘EAGAIN’
          The request was not enqueued due to (temporarily) exceeded
          resource limitations.
     ‘ENOSYS’
          The ‘aio_write’ function is not implemented.
     ‘EBADF’
          The ‘aiocbp->aio_fildes’ descriptor is not valid.  This
          condition may not be recognized before enqueueing the request,
          and so this error might also be signaled asynchronously.
     ‘EINVAL’
          The ‘aiocbp->aio_offset’ or ‘aiocbp->aio_reqprio’ value is
          invalid.  This condition may not be recognized before
          enqueueing the request and so this error might also be
          signaled asynchronously.

     In the case ‘aio_write’ returns zero, the current status of the
     request can be queried using ‘aio_error’ and ‘aio_return’
     functions.  As long as the value returned by ‘aio_error’ is
     ‘EINPROGRESS’ the operation has not yet completed.  If ‘aio_error’
     returns zero, the operation successfully terminated, otherwise the
     value is to be interpreted as an error code.  If the function
     terminated, the result of the operation can be get using a call to
     ‘aio_return’.  The returned value is the same as an equivalent call
     to ‘read’ would have returned.  Possible error codes returned by
     ‘aio_error’ are:

     ‘EBADF’
          The ‘aiocbp->aio_fildes’ descriptor is not valid.
     ‘ECANCELED’
          The operation was canceled before the operation was finished.
          (*note Cancel AIO Operations::)
     ‘EINVAL’
          The ‘aiocbp->aio_offset’ value is invalid.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’, this
     function is in fact ‘aio_write64’ since the LFS interface
     transparently replaces the normal implementation.

 -- Function: int aio_write64 (struct aiocb64 *AIOCBP)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     This function is similar to the ‘aio_write’ function.  The only
     difference is that on 32 bit machines the file descriptor should be
     opened in the large file mode.  Internally ‘aio_write64’ uses
     functionality equivalent to ‘lseek64’ (*note File Position
     Primitive::) to position the file descriptor correctly for the
     writing, as opposed to ‘lseek’ functionality used in ‘aio_write’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’, this
     function is available under the name ‘aio_write’ and so
     transparently replaces the interface for small files on 32 bit
     machines.

   Besides these functions with the more or less traditional interface,
POSIX.1b also defines a function which can initiate more than one
operation at a time, and which can handle freely mixed read and write
operations.  It is therefore similar to a combination of ‘readv’ and
‘writev’.

 -- Function: int lio_listio (int MODE, struct aiocb *const LIST[], int
          NENT, struct sigevent *SIG)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     The ‘lio_listio’ function can be used to enqueue an arbitrary
     number of read and write requests at one time.  The requests can
     all be meant for the same file, all for different files or every
     solution in between.

     ‘lio_listio’ gets the NENT requests from the array pointed to by
     LIST.  The operation to be performed is determined by the
     ‘aio_lio_opcode’ member in each element of LIST.  If this field is
     ‘LIO_READ’ a read operation is enqueued, similar to a call of
     ‘aio_read’ for this element of the array (except that the way the
     termination is signalled is different, as we will see below).  If
     the ‘aio_lio_opcode’ member is ‘LIO_WRITE’ a write operation is
     enqueued.  Otherwise the ‘aio_lio_opcode’ must be ‘LIO_NOP’ in
     which case this element of LIST is simply ignored.  This
     “operation” is useful in situations where one has a fixed array of
     ‘struct aiocb’ elements from which only a few need to be handled at
     a time.  Another situation is where the ‘lio_listio’ call was
     canceled before all requests are processed (*note Cancel AIO
     Operations::) and the remaining requests have to be reissued.

     The other members of each element of the array pointed to by ‘list’
     must have values suitable for the operation as described in the
     documentation for ‘aio_read’ and ‘aio_write’ above.

     The MODE argument determines how ‘lio_listio’ behaves after having
     enqueued all the requests.  If MODE is ‘LIO_WAIT’ it waits until
     all requests terminated.  Otherwise MODE must be ‘LIO_NOWAIT’ and
     in this case the function returns immediately after having enqueued
     all the requests.  In this case the caller gets a notification of
     the termination of all requests according to the SIG parameter.  If
     SIG is ‘NULL’ no notification is send.  Otherwise a signal is sent
     or a thread is started, just as described in the description for
     ‘aio_read’ or ‘aio_write’.

     If MODE is ‘LIO_WAIT’, the return value of ‘lio_listio’ is 0 when
     all requests completed successfully.  Otherwise the function return
     -1 and ‘errno’ is set accordingly.  To find out which request or
     requests failed one has to use the ‘aio_error’ function on all the
     elements of the array LIST.

     In case MODE is ‘LIO_NOWAIT’, the function returns 0 if all
     requests were enqueued correctly.  The current state of the
     requests can be found using ‘aio_error’ and ‘aio_return’ as
     described above.  If ‘lio_listio’ returns -1 in this mode, the
     global variable ‘errno’ is set accordingly.  If a request did not
     yet terminate, a call to ‘aio_error’ returns ‘EINPROGRESS’.  If the
     value is different, the request is finished and the error value (or
     0) is returned and the result of the operation can be retrieved
     using ‘aio_return’.

     Possible values for ‘errno’ are:

     ‘EAGAIN’
          The resources necessary to queue all the requests are not
          available at the moment.  The error status for each element of
          LIST must be checked to determine which request failed.

          Another reason could be that the system wide limit of AIO
          requests is exceeded.  This cannot be the case for the
          implementation on GNU systems since no arbitrary limits exist.
     ‘EINVAL’
          The MODE parameter is invalid or NENT is larger than
          ‘AIO_LISTIO_MAX’.
     ‘EIO’
          One or more of the request’s I/O operations failed.  The error
          status of each request should be checked to determine which
          one failed.
     ‘ENOSYS’
          The ‘lio_listio’ function is not supported.

     If the MODE parameter is ‘LIO_NOWAIT’ and the caller cancels a
     request, the error status for this request returned by ‘aio_error’
     is ‘ECANCELED’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’, this
     function is in fact ‘lio_listio64’ since the LFS interface
     transparently replaces the normal implementation.

 -- Function: int lio_listio64 (int MODE, struct aiocb64 *const LIST[],
          int NENT, struct sigevent *SIG)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     This function is similar to the ‘lio_listio’ function.  The only
     difference is that on 32 bit machines, the file descriptor should
     be opened in the large file mode.  Internally, ‘lio_listio64’ uses
     functionality equivalent to ‘lseek64’ (*note File Position
     Primitive::) to position the file descriptor correctly for the
     reading or writing, as opposed to ‘lseek’ functionality used in
     ‘lio_listio’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’, this
     function is available under the name ‘lio_listio’ and so
     transparently replaces the interface for small files on 32 bit
     machines.


File: libc.info,  Node: Status of AIO Operations,  Next: Synchronizing AIO Operations,  Prev: Asynchronous Reads/Writes,  Up: Asynchronous I/O

13.10.2 Getting the Status of AIO Operations
--------------------------------------------

As already described in the documentation of the functions in the last
section, it must be possible to get information about the status of an
I/O request.  When the operation is performed truly asynchronously (as
with ‘aio_read’ and ‘aio_write’ and with ‘lio_listio’ when the mode is
‘LIO_NOWAIT’), one sometimes needs to know whether a specific request
already terminated and if so, what the result was.  The following two
functions allow you to get this kind of information.

 -- Function: int aio_error (const struct aiocb *AIOCBP)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function determines the error state of the request described
     by the ‘struct aiocb’ variable pointed to by AIOCBP.  If the
     request has not yet terminated the value returned is always
     ‘EINPROGRESS’.  Once the request has terminated the value
     ‘aio_error’ returns is either 0 if the request completed
     successfully or it returns the value which would be stored in the
     ‘errno’ variable if the request would have been done using ‘read’,
     ‘write’, or ‘fsync’.

     The function can return ‘ENOSYS’ if it is not implemented.  It
     could also return ‘EINVAL’ if the AIOCBP parameter does not refer
     to an asynchronous operation whose return status is not yet known.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ this
     function is in fact ‘aio_error64’ since the LFS interface
     transparently replaces the normal implementation.

 -- Function: int aio_error64 (const struct aiocb64 *AIOCBP)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to ‘aio_error’ with the only difference
     that the argument is a reference to a variable of type ‘struct
     aiocb64’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ this
     function is available under the name ‘aio_error’ and so
     transparently replaces the interface for small files on 32 bit
     machines.

 -- Function: ssize_t aio_return (struct aiocb *AIOCBP)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function can be used to retrieve the return status of the
     operation carried out by the request described in the variable
     pointed to by AIOCBP.  As long as the error status of this request
     as returned by ‘aio_error’ is ‘EINPROGRESS’ the return of this
     function is undefined.

     Once the request is finished this function can be used exactly once
     to retrieve the return value.  Following calls might lead to
     undefined behavior.  The return value itself is the value which
     would have been returned by the ‘read’, ‘write’, or ‘fsync’ call.

     The function can return ‘ENOSYS’ if it is not implemented.  It
     could also return ‘EINVAL’ if the AIOCBP parameter does not refer
     to an asynchronous operation whose return status is not yet known.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ this
     function is in fact ‘aio_return64’ since the LFS interface
     transparently replaces the normal implementation.

 -- Function: ssize_t aio_return64 (struct aiocb64 *AIOCBP)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function is similar to ‘aio_return’ with the only difference
     that the argument is a reference to a variable of type ‘struct
     aiocb64’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ this
     function is available under the name ‘aio_return’ and so
     transparently replaces the interface for small files on 32 bit
     machines.


File: libc.info,  Node: Synchronizing AIO Operations,  Next: Cancel AIO Operations,  Prev: Status of AIO Operations,  Up: Asynchronous I/O

13.10.3 Getting into a Consistent State
---------------------------------------

When dealing with asynchronous operations it is sometimes necessary to
get into a consistent state.  This would mean for AIO that one wants to
know whether a certain request or a group of request were processed.
This could be done by waiting for the notification sent by the system
after the operation terminated, but this sometimes would mean wasting
resources (mainly computation time).  Instead POSIX.1b defines two
functions which will help with most kinds of consistency.

   The ‘aio_fsync’ and ‘aio_fsync64’ functions are only available if the
symbol ‘_POSIX_SYNCHRONIZED_IO’ is defined in ‘unistd.h’.

 -- Function: int aio_fsync (int OP, struct aiocb *AIOCBP)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     Calling this function forces all I/O operations operating queued at
     the time of the function call operating on the file descriptor
     ‘aiocbp->aio_fildes’ into the synchronized I/O completion state
     (*note Synchronizing I/O::).  The ‘aio_fsync’ function returns
     immediately but the notification through the method described in
     ‘aiocbp->aio_sigevent’ will happen only after all requests for this
     file descriptor have terminated and the file is synchronized.  This
     also means that requests for this very same file descriptor which
     are queued after the synchronization request are not affected.

     If OP is ‘O_DSYNC’ the synchronization happens as with a call to
     ‘fdatasync’.  Otherwise OP should be ‘O_SYNC’ and the
     synchronization happens as with ‘fsync’.

     As long as the synchronization has not happened, a call to
     ‘aio_error’ with the reference to the object pointed to by AIOCBP
     returns ‘EINPROGRESS’.  Once the synchronization is done
     ‘aio_error’ return 0 if the synchronization was not successful.
     Otherwise the value returned is the value to which the ‘fsync’ or
     ‘fdatasync’ function would have set the ‘errno’ variable.  In this
     case nothing can be assumed about the consistency for the data
     written to this file descriptor.

     The return value of this function is 0 if the request was
     successfully enqueued.  Otherwise the return value is -1 and
     ‘errno’ is set to one of the following values:

     ‘EAGAIN’
          The request could not be enqueued due to temporary lack of
          resources.
     ‘EBADF’
          The file descriptor ‘AIOCBP->aio_fildes’ is not valid.
     ‘EINVAL’
          The implementation does not support I/O synchronization or the
          OP parameter is other than ‘O_DSYNC’ and ‘O_SYNC’.
     ‘ENOSYS’
          This function is not implemented.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ this
     function is in fact ‘aio_fsync64’ since the LFS interface
     transparently replaces the normal implementation.

 -- Function: int aio_fsync64 (int OP, struct aiocb64 *AIOCBP)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     This function is similar to ‘aio_fsync’ with the only difference
     that the argument is a reference to a variable of type ‘struct
     aiocb64’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ this
     function is available under the name ‘aio_fsync’ and so
     transparently replaces the interface for small files on 32 bit
     machines.

   Another method of synchronization is to wait until one or more
requests of a specific set terminated.  This could be achieved by the
‘aio_*’ functions to notify the initiating process about the termination
but in some situations this is not the ideal solution.  In a program
which constantly updates clients somehow connected to the server it is
not always the best solution to go round robin since some connections
might be slow.  On the other hand letting the ‘aio_*’ function notify
the caller might also be not the best solution since whenever the
process works on preparing data for on client it makes no sense to be
interrupted by a notification since the new client will not be handled
before the current client is served.  For situations like this
‘aio_suspend’ should be used.

 -- Function: int aio_suspend (const struct aiocb *const LIST[], int
          NENT, const struct timespec *TIMEOUT)
     Preliminary: | MT-Safe | AS-Unsafe lock | AC-Unsafe lock | *Note
     POSIX Safety Concepts::.

     When calling this function, the calling thread is suspended until
     at least one of the requests pointed to by the NENT elements of the
     array LIST has completed.  If any of the requests has already
     completed at the time ‘aio_suspend’ is called, the function returns
     immediately.  Whether a request has terminated or not is determined
     by comparing the error status of the request with ‘EINPROGRESS’.
     If an element of LIST is ‘NULL’, the entry is simply ignored.

     If no request has finished, the calling process is suspended.  If
     TIMEOUT is ‘NULL’, the process is not woken until a request has
     finished.  If TIMEOUT is not ‘NULL’, the process remains suspended
     at least as long as specified in TIMEOUT.  In this case,
     ‘aio_suspend’ returns with an error.

     The return value of the function is 0 if one or more requests from
     the LIST have terminated.  Otherwise the function returns -1 and
     ‘errno’ is set to one of the following values:

     ‘EAGAIN’
          None of the requests from the LIST completed in the time
          specified by TIMEOUT.
     ‘EINTR’
          A signal interrupted the ‘aio_suspend’ function.  This signal
          might also be sent by the AIO implementation while signalling
          the termination of one of the requests.
     ‘ENOSYS’
          The ‘aio_suspend’ function is not implemented.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ this
     function is in fact ‘aio_suspend64’ since the LFS interface
     transparently replaces the normal implementation.

 -- Function: int aio_suspend64 (const struct aiocb64 *const LIST[], int
          NENT, const struct timespec *TIMEOUT)
     Preliminary: | MT-Safe | AS-Unsafe lock | AC-Unsafe lock | *Note
     POSIX Safety Concepts::.

     This function is similar to ‘aio_suspend’ with the only difference
     that the argument is a reference to a variable of type ‘struct
     aiocb64’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’ this
     function is available under the name ‘aio_suspend’ and so
     transparently replaces the interface for small files on 32 bit
     machines.


File: libc.info,  Node: Cancel AIO Operations,  Next: Configuration of AIO,  Prev: Synchronizing AIO Operations,  Up: Asynchronous I/O

13.10.4 Cancellation of AIO Operations
--------------------------------------

When one or more requests are asynchronously processed, it might be
useful in some situations to cancel a selected operation, e.g., if it
becomes obvious that the written data is no longer accurate and would
have to be overwritten soon.  As an example, assume an application,
which writes data in files in a situation where new incoming data would
have to be written in a file which will be updated by an enqueued
request.  The POSIX AIO implementation provides such a function, but
this function is not capable of forcing the cancellation of the request.
It is up to the implementation to decide whether it is possible to
cancel the operation or not.  Therefore using this function is merely a
hint.

 -- Function: int aio_cancel (int FILDES, struct aiocb *AIOCBP)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     The ‘aio_cancel’ function can be used to cancel one or more
     outstanding requests.  If the AIOCBP parameter is ‘NULL’, the
     function tries to cancel all of the outstanding requests which
     would process the file descriptor FILDES (i.e., whose ‘aio_fildes’
     member is FILDES).  If AIOCBP is not ‘NULL’, ‘aio_cancel’ attempts
     to cancel the specific request pointed to by AIOCBP.

     For requests which were successfully canceled, the normal
     notification about the termination of the request should take
     place.  I.e., depending on the ‘struct sigevent’ object which
     controls this, nothing happens, a signal is sent or a thread is
     started.  If the request cannot be canceled, it terminates the
     usual way after performing the operation.

     After a request is successfully canceled, a call to ‘aio_error’
     with a reference to this request as the parameter will return
     ‘ECANCELED’ and a call to ‘aio_return’ will return -1.  If the
     request wasn’t canceled and is still running the error status is
     still ‘EINPROGRESS’.

     The return value of the function is ‘AIO_CANCELED’ if there were
     requests which haven’t terminated and which were successfully
     canceled.  If there is one or more requests left which couldn’t be
     canceled, the return value is ‘AIO_NOTCANCELED’.  In this case
     ‘aio_error’ must be used to find out which of the, perhaps
     multiple, requests (in AIOCBP is ‘NULL’) weren’t successfully
     canceled.  If all requests already terminated at the time
     ‘aio_cancel’ is called the return value is ‘AIO_ALLDONE’.

     If an error occurred during the execution of ‘aio_cancel’ the
     function returns -1 and sets ‘errno’ to one of the following
     values.

     ‘EBADF’
          The file descriptor FILDES is not valid.
     ‘ENOSYS’
          ‘aio_cancel’ is not implemented.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’, this
     function is in fact ‘aio_cancel64’ since the LFS interface
     transparently replaces the normal implementation.

 -- Function: int aio_cancel64 (int FILDES, struct aiocb64 *AIOCBP)
     Preliminary: | MT-Safe | AS-Unsafe lock heap | AC-Unsafe lock mem |
     *Note POSIX Safety Concepts::.

     This function is similar to ‘aio_cancel’ with the only difference
     that the argument is a reference to a variable of type ‘struct
     aiocb64’.

     When the sources are compiled with ‘_FILE_OFFSET_BITS == 64’, this
     function is available under the name ‘aio_cancel’ and so
     transparently replaces the interface for small files on 32 bit
     machines.


File: libc.info,  Node: Configuration of AIO,  Prev: Cancel AIO Operations,  Up: Asynchronous I/O

13.10.5 How to optimize the AIO implementation
----------------------------------------------

The POSIX standard does not specify how the AIO functions are
implemented.  They could be system calls, but it is also possible to
emulate them at userlevel.

   At the point of this writing, the available implementation is a
userlevel implementation which uses threads for handling the enqueued
requests.  While this implementation requires making some decisions
about limitations, hard limitations are something which is best avoided
in the GNU C Library.  Therefore, the GNU C Library provides a means for
tuning the AIO implementation according to the individual use.

 -- Data Type: struct aioinit
     This data type is used to pass the configuration or tunable
     parameters to the implementation.  The program has to initialize
     the members of this struct and pass it to the implementation using
     the ‘aio_init’ function.

     ‘int aio_threads’
          This member specifies the maximal number of threads which may
          be used at any one time.
     ‘int aio_num’
          This number provides an estimate on the maximal number of
          simultaneously enqueued requests.
     ‘int aio_locks’
          Unused.
     ‘int aio_usedba’
          Unused.
     ‘int aio_debug’
          Unused.
     ‘int aio_numusers’
          Unused.
     ‘int aio_reserved[2]’
          Unused.

 -- Function: void aio_init (const struct aioinit *INIT)
     Preliminary: | MT-Safe | AS-Unsafe lock | AC-Unsafe lock | *Note
     POSIX Safety Concepts::.

     This function must be called before any other AIO function.
     Calling it is completely voluntary, as it is only meant to help the
     AIO implementation perform better.

     Before calling the ‘aio_init’, function the members of a variable
     of type ‘struct aioinit’ must be initialized.  Then a reference to
     this variable is passed as the parameter to ‘aio_init’ which itself
     may or may not pay attention to the hints.

     The function has no return value and no error cases are defined.
     It is a extension which follows a proposal from the SGI
     implementation in Irix 6.  It is not covered by POSIX.1b or Unix98.


File: libc.info,  Node: Control Operations,  Next: Duplicating Descriptors,  Prev: Asynchronous I/O,  Up: Low-Level I/O

13.11 Control Operations on Files
=================================

This section describes how you can perform various other operations on
file descriptors, such as inquiring about or setting flags describing
the status of the file descriptor, manipulating record locks, and the
like.  All of these operations are performed by the function ‘fcntl’.

   The second argument to the ‘fcntl’ function is a command that
specifies which operation to perform.  The function and macros that name
various flags that are used with it are declared in the header file
‘fcntl.h’.  Many of these flags are also used by the ‘open’ function;
see *note Opening and Closing Files::.

 -- Function: int fcntl (int FILEDES, int COMMAND, …)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The ‘fcntl’ function performs the operation specified by COMMAND on
     the file descriptor FILEDES.  Some commands require additional
     arguments to be supplied.  These additional arguments and the
     return value and error conditions are given in the detailed
     descriptions of the individual commands.

     Briefly, here is a list of what the various commands are.

     ‘F_DUPFD’
          Duplicate the file descriptor (return another file descriptor
          pointing to the same open file).  *Note Duplicating
          Descriptors::.

     ‘F_GETFD’
          Get flags associated with the file descriptor.  *Note
          Descriptor Flags::.

     ‘F_SETFD’
          Set flags associated with the file descriptor.  *Note
          Descriptor Flags::.

     ‘F_GETFL’
          Get flags associated with the open file.  *Note File Status
          Flags::.

     ‘F_SETFL’
          Set flags associated with the open file.  *Note File Status
          Flags::.

     ‘F_GETLK’
          Test a file lock.  *Note File Locks::.

     ‘F_SETLK’
          Set or clear a file lock.  *Note File Locks::.

     ‘F_SETLKW’
          Like ‘F_SETLK’, but wait for completion.  *Note File Locks::.

     ‘F_OFD_GETLK’
          Test an open file description lock.  *Note Open File
          Description Locks::.  Specific to Linux.

     ‘F_OFD_SETLK’
          Set or clear an open file description lock.  *Note Open File
          Description Locks::.  Specific to Linux.

     ‘F_OFD_SETLKW’
          Like ‘F_OFD_SETLK’, but block until lock is acquired.  *Note
          Open File Description Locks::.  Specific to Linux.

     ‘F_GETOWN’
          Get process or process group ID to receive ‘SIGIO’ signals.
          *Note Interrupt Input::.

     ‘F_SETOWN’
          Set process or process group ID to receive ‘SIGIO’ signals.
          *Note Interrupt Input::.

     This function is a cancellation point in multi-threaded programs.
     This is a problem if the thread allocates some resources (like
     memory, file descriptors, semaphores or whatever) at the time
     ‘fcntl’ is called.  If the thread gets canceled these resources
     stay allocated until the program ends.  To avoid this calls to
     ‘fcntl’ should be protected using cancellation handlers.


File: libc.info,  Node: Duplicating Descriptors,  Next: Descriptor Flags,  Prev: Control Operations,  Up: Low-Level I/O

13.12 Duplicating Descriptors
=============================

You can "duplicate" a file descriptor, or allocate another file
descriptor that refers to the same open file as the original.  Duplicate
descriptors share one file position and one set of file status flags
(*note File Status Flags::), but each has its own set of file descriptor
flags (*note Descriptor Flags::).

   The major use of duplicating a file descriptor is to implement
"redirection" of input or output: that is, to change the file or pipe
that a particular file descriptor corresponds to.

   You can perform this operation using the ‘fcntl’ function with the
‘F_DUPFD’ command, but there are also convenient functions ‘dup’ and
‘dup2’ for duplicating descriptors.

   The ‘fcntl’ function and flags are declared in ‘fcntl.h’, while
prototypes for ‘dup’ and ‘dup2’ are in the header file ‘unistd.h’.

 -- Function: int dup (int OLD)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function copies descriptor OLD to the first available
     descriptor number (the first number not currently open).  It is
     equivalent to ‘fcntl (OLD, F_DUPFD, 0)’.

 -- Function: int dup2 (int OLD, int NEW)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This function copies the descriptor OLD to descriptor number NEW.

     If OLD is an invalid descriptor, then ‘dup2’ does nothing; it does
     not close NEW.  Otherwise, the new duplicate of OLD replaces any
     previous meaning of descriptor NEW, as if NEW were closed first.

     If OLD and NEW are different numbers, and OLD is a valid descriptor
     number, then ‘dup2’ is equivalent to:

          close (NEW);
          fcntl (OLD, F_DUPFD, NEW)

     However, ‘dup2’ does this atomically; there is no instant in the
     middle of calling ‘dup2’ at which NEW is closed and not yet a
     duplicate of OLD.

 -- Macro: int F_DUPFD
     This macro is used as the COMMAND argument to ‘fcntl’, to copy the
     file descriptor given as the first argument.

     The form of the call in this case is:

          fcntl (OLD, F_DUPFD, NEXT-FILEDES)

     The NEXT-FILEDES argument is of type ‘int’ and specifies that the
     file descriptor returned should be the next available one greater
     than or equal to this value.

     The return value from ‘fcntl’ with this command is normally the
     value of the new file descriptor.  A return value of -1 indicates
     an error.  The following ‘errno’ error conditions are defined for
     this command:

     ‘EBADF’
          The OLD argument is invalid.

     ‘EINVAL’
          The NEXT-FILEDES argument is invalid.

     ‘EMFILE’
          There are no more file descriptors available—your program is
          already using the maximum.  In BSD and GNU, the maximum is
          controlled by a resource limit that can be changed; *note
          Limits on Resources::, for more information about the
          ‘RLIMIT_NOFILE’ limit.

     ‘ENFILE’ is not a possible error code for ‘dup2’ because ‘dup2’
     does not create a new opening of a file; duplicate descriptors do
     not count toward the limit which ‘ENFILE’ indicates.  ‘EMFILE’ is
     possible because it refers to the limit on distinct descriptor
     numbers in use in one process.

   Here is an example showing how to use ‘dup2’ to do redirection.
Typically, redirection of the standard streams (like ‘stdin’) is done by
a shell or shell-like program before calling one of the ‘exec’ functions
(*note Executing a File::) to execute a new program in a child process.
When the new program is executed, it creates and initializes the
standard streams to point to the corresponding file descriptors, before
its ‘main’ function is invoked.

   So, to redirect standard input to a file, the shell could do
something like:

     pid = fork ();
     if (pid == 0)
       {
         char *filename;
         char *program;
         int file;
         …
         file = TEMP_FAILURE_RETRY (open (filename, O_RDONLY));
         dup2 (file, STDIN_FILENO);
         TEMP_FAILURE_RETRY (close (file));
         execv (program, NULL);
       }

   There is also a more detailed example showing how to implement
redirection in the context of a pipeline of processes in *note Launching
Jobs::.


File: libc.info,  Node: Descriptor Flags,  Next: File Status Flags,  Prev: Duplicating Descriptors,  Up: Low-Level I/O

13.13 File Descriptor Flags
===========================

"File descriptor flags" are miscellaneous attributes of a file
descriptor.  These flags are associated with particular file
descriptors, so that if you have created duplicate file descriptors from
a single opening of a file, each descriptor has its own set of flags.

   Currently there is just one file descriptor flag: ‘FD_CLOEXEC’, which
causes the descriptor to be closed if you use any of the ‘exec…’
functions (*note Executing a File::).

   The symbols in this section are defined in the header file ‘fcntl.h’.

 -- Macro: int F_GETFD
     This macro is used as the COMMAND argument to ‘fcntl’, to specify
     that it should return the file descriptor flags associated with the
     FILEDES argument.

     The normal return value from ‘fcntl’ with this command is a
     nonnegative number which can be interpreted as the bitwise OR of
     the individual flags (except that currently there is only one flag
     to use).

     In case of an error, ‘fcntl’ returns -1.  The following ‘errno’
     error conditions are defined for this command:

     ‘EBADF’
          The FILEDES argument is invalid.

 -- Macro: int F_SETFD
     This macro is used as the COMMAND argument to ‘fcntl’, to specify
     that it should set the file descriptor flags associated with the
     FILEDES argument.  This requires a third ‘int’ argument to specify
     the new flags, so the form of the call is:

          fcntl (FILEDES, F_SETFD, NEW-FLAGS)

     The normal return value from ‘fcntl’ with this command is an
     unspecified value other than -1, which indicates an error.  The
     flags and error conditions are the same as for the ‘F_GETFD’
     command.

   The following macro is defined for use as a file descriptor flag with
the ‘fcntl’ function.  The value is an integer constant usable as a bit
mask value.

 -- Macro: int FD_CLOEXEC
     This flag specifies that the file descriptor should be closed when
     an ‘exec’ function is invoked; see *note Executing a File::.  When
     a file descriptor is allocated (as with ‘open’ or ‘dup’), this bit
     is initially cleared on the new file descriptor, meaning that
     descriptor will survive into the new program after ‘exec’.

   If you want to modify the file descriptor flags, you should get the
current flags with ‘F_GETFD’ and modify the value.  Don’t assume that
the flags listed here are the only ones that are implemented; your
program may be run years from now and more flags may exist then.  For
example, here is a function to set or clear the flag ‘FD_CLOEXEC’
without altering any other flags:

     /* Set the ‘FD_CLOEXEC’ flag of DESC if VALUE is nonzero,
        or clear the flag if VALUE is 0.
        Return 0 on success, or -1 on error with ‘errno’ set. */

     int
     set_cloexec_flag (int desc, int value)
     {
       int oldflags = fcntl (desc, F_GETFD, 0);
       /* If reading the flags failed, return error indication now. */
       if (oldflags < 0)
         return oldflags;
       /* Set just the flag we want to set. */
       if (value != 0)
         oldflags |= FD_CLOEXEC;
       else
         oldflags &= ~FD_CLOEXEC;
       /* Store modified flag word in the descriptor. */
       return fcntl (desc, F_SETFD, oldflags);
     }


File: libc.info,  Node: File Status Flags,  Next: File Locks,  Prev: Descriptor Flags,  Up: Low-Level I/O

13.14 File Status Flags
=======================

"File status flags" are used to specify attributes of the opening of a
file.  Unlike the file descriptor flags discussed in *note Descriptor
Flags::, the file status flags are shared by duplicated file descriptors
resulting from a single opening of the file.  The file status flags are
specified with the FLAGS argument to ‘open’; *note Opening and Closing
Files::.

   File status flags fall into three categories, which are described in
the following sections.

   • *note Access Modes::, specify what type of access is allowed to the
     file: reading, writing, or both.  They are set by ‘open’ and are
     returned by ‘fcntl’, but cannot be changed.

   • *note Open-time Flags::, control details of what ‘open’ will do.
     These flags are not preserved after the ‘open’ call.

   • *note Operating Modes::, affect how operations such as ‘read’ and
     ‘write’ are done.  They are set by ‘open’, and can be fetched or
     changed with ‘fcntl’.

   The symbols in this section are defined in the header file ‘fcntl.h’.

* Menu:

* Access Modes::                Whether the descriptor can read or write.
* Open-time Flags::             Details of ‘open’.
* Operating Modes::             Special modes to control I/O operations.
* Getting File Status Flags::   Fetching and changing these flags.


File: libc.info,  Node: Access Modes,  Next: Open-time Flags,  Up: File Status Flags

13.14.1 File Access Modes
-------------------------

The file access modes allow a file descriptor to be used for reading,
writing, or both.  (On GNU/Hurd systems, they can also allow none of
these, and allow execution of the file as a program.)  The access modes
are chosen when the file is opened, and never change.

 -- Macro: int O_RDONLY
     Open the file for read access.

 -- Macro: int O_WRONLY
     Open the file for write access.

 -- Macro: int O_RDWR
     Open the file for both reading and writing.

   On GNU/Hurd systems (and not on other systems), ‘O_RDONLY’ and
‘O_WRONLY’ are independent bits that can be bitwise-ORed together, and
it is valid for either bit to be set or clear.  This means that ‘O_RDWR’
is the same as ‘O_RDONLY|O_WRONLY’.  A file access mode of zero is
permissible; it allows no operations that do input or output to the
file, but does allow other operations such as ‘fchmod’.  On GNU/Hurd
systems, since “read-only” or “write-only” is a misnomer, ‘fcntl.h’
defines additional names for the file access modes.  These names are
preferred when writing GNU-specific code.  But most programs will want
to be portable to other POSIX.1 systems and should use the POSIX.1 names
above instead.

 -- Macro: int O_READ
     Open the file for reading.  Same as ‘O_RDONLY’; only defined on
     GNU.

 -- Macro: int O_WRITE
     Open the file for writing.  Same as ‘O_WRONLY’; only defined on
     GNU.

 -- Macro: int O_EXEC
     Open the file for executing.  Only defined on GNU.

   To determine the file access mode with ‘fcntl’, you must extract the
access mode bits from the retrieved file status flags.  On GNU/Hurd
systems, you can just test the ‘O_READ’ and ‘O_WRITE’ bits in the flags
word.  But in other POSIX.1 systems, reading and writing access modes
are not stored as distinct bit flags.  The portable way to extract the
file access mode bits is with ‘O_ACCMODE’.

 -- Macro: int O_ACCMODE
     This macro stands for a mask that can be bitwise-ANDed with the
     file status flag value to produce a value representing the file
     access mode.  The mode will be ‘O_RDONLY’, ‘O_WRONLY’, or ‘O_RDWR’.
     (On GNU/Hurd systems it could also be zero, and it never includes
     the ‘O_EXEC’ bit.)


File: libc.info,  Node: Open-time Flags,  Next: Operating Modes,  Prev: Access Modes,  Up: File Status Flags

13.14.2 Open-time Flags
-----------------------

The open-time flags specify options affecting how ‘open’ will behave.
These options are not preserved once the file is open.  The exception to
this is ‘O_NONBLOCK’, which is also an I/O operating mode and so it _is_
saved.  *Note Opening and Closing Files::, for how to call ‘open’.

   There are two sorts of options specified by open-time flags.

   • "File name translation flags" affect how ‘open’ looks up the file
     name to locate the file, and whether the file can be created.

   • "Open-time action flags" specify extra operations that ‘open’ will
     perform on the file once it is open.

   Here are the file name translation flags.

 -- Macro: int O_CREAT
     If set, the file will be created if it doesn’t already exist.

 -- Macro: int O_EXCL
     If both ‘O_CREAT’ and ‘O_EXCL’ are set, then ‘open’ fails if the
     specified file already exists.  This is guaranteed to never clobber
     an existing file.

 -- Macro: int O_NONBLOCK
     This prevents ‘open’ from blocking for a “long time” to open the
     file.  This is only meaningful for some kinds of files, usually
     devices such as serial ports; when it is not meaningful, it is
     harmless and ignored.  Often opening a port to a modem blocks until
     the modem reports carrier detection; if ‘O_NONBLOCK’ is specified,
     ‘open’ will return immediately without a carrier.

     Note that the ‘O_NONBLOCK’ flag is overloaded as both an I/O
     operating mode and a file name translation flag.  This means that
     specifying ‘O_NONBLOCK’ in ‘open’ also sets nonblocking I/O mode;
     *note Operating Modes::.  To open the file without blocking but do
     normal I/O that blocks, you must call ‘open’ with ‘O_NONBLOCK’ set
     and then call ‘fcntl’ to turn the bit off.

 -- Macro: int O_NOCTTY
     If the named file is a terminal device, don’t make it the
     controlling terminal for the process.  *Note Job Control::, for
     information about what it means to be the controlling terminal.

     On GNU/Hurd systems and 4.4 BSD, opening a file never makes it the
     controlling terminal and ‘O_NOCTTY’ is zero.  However, GNU/Linux
     systems and some other systems use a nonzero value for ‘O_NOCTTY’
     and set the controlling terminal when you open a file that is a
     terminal device; so to be portable, use ‘O_NOCTTY’ when it is
     important to avoid this.

   The following three file name translation flags exist only on
GNU/Hurd systems.

 -- Macro: int O_IGNORE_CTTY
     Do not recognize the named file as the controlling terminal, even
     if it refers to the process’s existing controlling terminal device.
     Operations on the new file descriptor will never induce job control
     signals.  *Note Job Control::.

 -- Macro: int O_NOLINK
     If the named file is a symbolic link, open the link itself instead
     of the file it refers to.  (‘fstat’ on the new file descriptor will
     return the information returned by ‘lstat’ on the link’s name.)

 -- Macro: int O_NOTRANS
     If the named file is specially translated, do not invoke the
     translator.  Open the bare file the translator itself sees.

   The open-time action flags tell ‘open’ to do additional operations
which are not really related to opening the file.  The reason to do them
as part of ‘open’ instead of in separate calls is that ‘open’ can do
them atomically.

 -- Macro: int O_TRUNC
     Truncate the file to zero length.  This option is only useful for
     regular files, not special files such as directories or FIFOs.
     POSIX.1 requires that you open the file for writing to use
     ‘O_TRUNC’.  In BSD and GNU you must have permission to write the
     file to truncate it, but you need not open for write access.

     This is the only open-time action flag specified by POSIX.1.  There
     is no good reason for truncation to be done by ‘open’, instead of
     by calling ‘ftruncate’ afterwards.  The ‘O_TRUNC’ flag existed in
     Unix before ‘ftruncate’ was invented, and is retained for backward
     compatibility.

   The remaining operating modes are BSD extensions.  They exist only on
some systems.  On other systems, these macros are not defined.

 -- Macro: int O_SHLOCK
     Acquire a shared lock on the file, as with ‘flock’.  *Note File
     Locks::.

     If ‘O_CREAT’ is specified, the locking is done atomically when
     creating the file.  You are guaranteed that no other process will
     get the lock on the new file first.

 -- Macro: int O_EXLOCK
     Acquire an exclusive lock on the file, as with ‘flock’.  *Note File
     Locks::.  This is atomic like ‘O_SHLOCK’.


File: libc.info,  Node: Operating Modes,  Next: Getting File Status Flags,  Prev: Open-time Flags,  Up: File Status Flags

13.14.3 I/O Operating Modes
---------------------------

The operating modes affect how input and output operations using a file
descriptor work.  These flags are set by ‘open’ and can be fetched and
changed with ‘fcntl’.

 -- Macro: int O_APPEND
     The bit that enables append mode for the file.  If set, then all
     ‘write’ operations write the data at the end of the file, extending
     it, regardless of the current file position.  This is the only
     reliable way to append to a file.  In append mode, you are
     guaranteed that the data you write will always go to the current
     end of the file, regardless of other processes writing to the file.
     Conversely, if you simply set the file position to the end of file
     and write, then another process can extend the file after you set
     the file position but before you write, resulting in your data
     appearing someplace before the real end of file.

 -- Macro: int O_NONBLOCK
     The bit that enables nonblocking mode for the file.  If this bit is
     set, ‘read’ requests on the file can return immediately with a
     failure status if there is no input immediately available, instead
     of blocking.  Likewise, ‘write’ requests can also return
     immediately with a failure status if the output can’t be written
     immediately.

     Note that the ‘O_NONBLOCK’ flag is overloaded as both an I/O
     operating mode and a file name translation flag; *note Open-time
     Flags::.

 -- Macro: int O_NDELAY
     This is an obsolete name for ‘O_NONBLOCK’, provided for
     compatibility with BSD. It is not defined by the POSIX.1 standard.

   The remaining operating modes are BSD and GNU extensions.  They exist
only on some systems.  On other systems, these macros are not defined.

 -- Macro: int O_ASYNC
     The bit that enables asynchronous input mode.  If set, then ‘SIGIO’
     signals will be generated when input is available.  *Note Interrupt
     Input::.

     Asynchronous input mode is a BSD feature.

 -- Macro: int O_FSYNC
     The bit that enables synchronous writing for the file.  If set,
     each ‘write’ call will make sure the data is reliably stored on
     disk before returning.

     Synchronous writing is a BSD feature.

 -- Macro: int O_SYNC
     This is another name for ‘O_FSYNC’.  They have the same value.

 -- Macro: int O_NOATIME
     If this bit is set, ‘read’ will not update the access time of the
     file.  *Note File Times::.  This is used by programs that do
     backups, so that backing a file up does not count as reading it.
     Only the owner of the file or the superuser may use this bit.

     This is a GNU extension.


File: libc.info,  Node: Getting File Status Flags,  Prev: Operating Modes,  Up: File Status Flags

13.14.4 Getting and Setting File Status Flags
---------------------------------------------

The ‘fcntl’ function can fetch or change file status flags.

 -- Macro: int F_GETFL
     This macro is used as the COMMAND argument to ‘fcntl’, to read the
     file status flags for the open file with descriptor FILEDES.

     The normal return value from ‘fcntl’ with this command is a
     nonnegative number which can be interpreted as the bitwise OR of
     the individual flags.  Since the file access modes are not
     single-bit values, you can mask off other bits in the returned
     flags with ‘O_ACCMODE’ to compare them.

     In case of an error, ‘fcntl’ returns -1.  The following ‘errno’
     error conditions are defined for this command:

     ‘EBADF’
          The FILEDES argument is invalid.

 -- Macro: int F_SETFL
     This macro is used as the COMMAND argument to ‘fcntl’, to set the
     file status flags for the open file corresponding to the FILEDES
     argument.  This command requires a third ‘int’ argument to specify
     the new flags, so the call looks like this:

          fcntl (FILEDES, F_SETFL, NEW-FLAGS)

     You can’t change the access mode for the file in this way; that is,
     whether the file descriptor was opened for reading or writing.

     The normal return value from ‘fcntl’ with this command is an
     unspecified value other than -1, which indicates an error.  The
     error conditions are the same as for the ‘F_GETFL’ command.

   If you want to modify the file status flags, you should get the
current flags with ‘F_GETFL’ and modify the value.  Don’t assume that
the flags listed here are the only ones that are implemented; your
program may be run years from now and more flags may exist then.  For
example, here is a function to set or clear the flag ‘O_NONBLOCK’
without altering any other flags:

     /* Set the ‘O_NONBLOCK’ flag of DESC if VALUE is nonzero,
        or clear the flag if VALUE is 0.
        Return 0 on success, or -1 on error with ‘errno’ set. */

     int
     set_nonblock_flag (int desc, int value)
     {
       int oldflags = fcntl (desc, F_GETFL, 0);
       /* If reading the flags failed, return error indication now. */
       if (oldflags == -1)
         return -1;
       /* Set just the flag we want to set. */
       if (value != 0)
         oldflags |= O_NONBLOCK;
       else
         oldflags &= ~O_NONBLOCK;
       /* Store modified flag word in the descriptor. */
       return fcntl (desc, F_SETFL, oldflags);
     }


File: libc.info,  Node: File Locks,  Next: Open File Description Locks,  Prev: File Status Flags,  Up: Low-Level I/O

13.15 File Locks
================

This section describes record locks that are associated with the
process.  There is also a different type of record lock that is
associated with the open file description instead of the process.  *Note
Open File Description Locks::.

   The remaining ‘fcntl’ commands are used to support "record locking",
which permits multiple cooperating programs to prevent each other from
simultaneously accessing parts of a file in error-prone ways.

   An "exclusive" or "write" lock gives a process exclusive access for
writing to the specified part of the file.  While a write lock is in
place, no other process can lock that part of the file.

   A "shared" or "read" lock prohibits any other process from requesting
a write lock on the specified part of the file.  However, other
processes can request read locks.

   The ‘read’ and ‘write’ functions do not actually check to see whether
there are any locks in place.  If you want to implement a locking
protocol for a file shared by multiple processes, your application must
do explicit ‘fcntl’ calls to request and clear locks at the appropriate
points.

   Locks are associated with processes.  A process can only have one
kind of lock set for each byte of a given file.  When any file
descriptor for that file is closed by the process, all of the locks that
process holds on that file are released, even if the locks were made
using other descriptors that remain open.  Likewise, locks are released
when a process exits, and are not inherited by child processes created
using ‘fork’ (*note Creating a Process::).

   When making a lock, use a ‘struct flock’ to specify what kind of lock
and where.  This data type and the associated macros for the ‘fcntl’
function are declared in the header file ‘fcntl.h’.

 -- Data Type: struct flock
     This structure is used with the ‘fcntl’ function to describe a file
     lock.  It has these members:

     ‘short int l_type’
          Specifies the type of the lock; one of ‘F_RDLCK’, ‘F_WRLCK’,
          or ‘F_UNLCK’.

     ‘short int l_whence’
          This corresponds to the WHENCE argument to ‘fseek’ or ‘lseek’,
          and specifies what the offset is relative to.  Its value can
          be one of ‘SEEK_SET’, ‘SEEK_CUR’, or ‘SEEK_END’.

     ‘off_t l_start’
          This specifies the offset of the start of the region to which
          the lock applies, and is given in bytes relative to the point
          specified by ‘l_whence’ member.

     ‘off_t l_len’
          This specifies the length of the region to be locked.  A value
          of ‘0’ is treated specially; it means the region extends to
          the end of the file.

     ‘pid_t l_pid’
          This field is the process ID (*note Process Creation
          Concepts::) of the process holding the lock.  It is filled in
          by calling ‘fcntl’ with the ‘F_GETLK’ command, but is ignored
          when making a lock.  If the conflicting lock is an open file
          description lock (*note Open File Description Locks::), then
          this field will be set to -1.

 -- Macro: int F_GETLK
     This macro is used as the COMMAND argument to ‘fcntl’, to specify
     that it should get information about a lock.  This command requires
     a third argument of type ‘struct flock *’ to be passed to ‘fcntl’,
     so that the form of the call is:

          fcntl (FILEDES, F_GETLK, LOCKP)

     If there is a lock already in place that would block the lock
     described by the LOCKP argument, information about that lock
     overwrites ‘*LOCKP’.  Existing locks are not reported if they are
     compatible with making a new lock as specified.  Thus, you should
     specify a lock type of ‘F_WRLCK’ if you want to find out about both
     read and write locks, or ‘F_RDLCK’ if you want to find out about
     write locks only.

     There might be more than one lock affecting the region specified by
     the LOCKP argument, but ‘fcntl’ only returns information about one
     of them.  The ‘l_whence’ member of the LOCKP structure is set to
     ‘SEEK_SET’ and the ‘l_start’ and ‘l_len’ fields set to identify the
     locked region.

     If no lock applies, the only change to the LOCKP structure is to
     update the ‘l_type’ to a value of ‘F_UNLCK’.

     The normal return value from ‘fcntl’ with this command is an
     unspecified value other than -1, which is reserved to indicate an
     error.  The following ‘errno’ error conditions are defined for this
     command:

     ‘EBADF’
          The FILEDES argument is invalid.

     ‘EINVAL’
          Either the LOCKP argument doesn’t specify valid lock
          information, or the file associated with FILEDES doesn’t
          support locks.

 -- Macro: int F_SETLK
     This macro is used as the COMMAND argument to ‘fcntl’, to specify
     that it should set or clear a lock.  This command requires a third
     argument of type ‘struct flock *’ to be passed to ‘fcntl’, so that
     the form of the call is:

          fcntl (FILEDES, F_SETLK, LOCKP)

     If the process already has a lock on any part of the region, the
     old lock on that part is replaced with the new lock.  You can
     remove a lock by specifying a lock type of ‘F_UNLCK’.

     If the lock cannot be set, ‘fcntl’ returns immediately with a value
     of -1.  This function does not block waiting for other processes to
     release locks.  If ‘fcntl’ succeeds, it return a value other than
     -1.

     The following ‘errno’ error conditions are defined for this
     function:

     ‘EAGAIN’
     ‘EACCES’
          The lock cannot be set because it is blocked by an existing
          lock on the file.  Some systems use ‘EAGAIN’ in this case, and
          other systems use ‘EACCES’; your program should treat them
          alike, after ‘F_SETLK’.  (GNU/Linux and GNU/Hurd systems
          always use ‘EAGAIN’.)

     ‘EBADF’
          Either: the FILEDES argument is invalid; you requested a read
          lock but the FILEDES is not open for read access; or, you
          requested a write lock but the FILEDES is not open for write
          access.

     ‘EINVAL’
          Either the LOCKP argument doesn’t specify valid lock
          information, or the file associated with FILEDES doesn’t
          support locks.

     ‘ENOLCK’
          The system has run out of file lock resources; there are
          already too many file locks in place.

          Well-designed file systems never report this error, because
          they have no limitation on the number of locks.  However, you
          must still take account of the possibility of this error, as
          it could result from network access to a file system on
          another machine.

 -- Macro: int F_SETLKW
     This macro is used as the COMMAND argument to ‘fcntl’, to specify
     that it should set or clear a lock.  It is just like the ‘F_SETLK’
     command, but causes the process to block (or wait) until the
     request can be specified.

     This command requires a third argument of type ‘struct flock *’, as
     for the ‘F_SETLK’ command.

     The ‘fcntl’ return values and errors are the same as for the
     ‘F_SETLK’ command, but these additional ‘errno’ error conditions
     are defined for this command:

     ‘EINTR’
          The function was interrupted by a signal while it was waiting.
          *Note Interrupted Primitives::.

     ‘EDEADLK’
          The specified region is being locked by another process.  But
          that process is waiting to lock a region which the current
          process has locked, so waiting for the lock would result in
          deadlock.  The system does not guarantee that it will detect
          all such conditions, but it lets you know if it notices one.

   The following macros are defined for use as values for the ‘l_type’
member of the ‘flock’ structure.  The values are integer constants.

‘F_RDLCK’
     This macro is used to specify a read (or shared) lock.

‘F_WRLCK’
     This macro is used to specify a write (or exclusive) lock.

‘F_UNLCK’
     This macro is used to specify that the region is unlocked.

   As an example of a situation where file locking is useful, consider a
program that can be run simultaneously by several different users, that
logs status information to a common file.  One example of such a program
might be a game that uses a file to keep track of high scores.  Another
example might be a program that records usage or accounting information
for billing purposes.

   Having multiple copies of the program simultaneously writing to the
file could cause the contents of the file to become mixed up.  But you
can prevent this kind of problem by setting a write lock on the file
before actually writing to the file.

   If the program also needs to read the file and wants to make sure
that the contents of the file are in a consistent state, then it can
also use a read lock.  While the read lock is set, no other process can
lock that part of the file for writing.

   Remember that file locks are only an _advisory_ protocol for
controlling access to a file.  There is still potential for access to
the file by programs that don’t use the lock protocol.


File: libc.info,  Node: Open File Description Locks,  Next: Open File Description Locks Example,  Prev: File Locks,  Up: Low-Level I/O

13.16 Open File Description Locks
=================================

In contrast to process-associated record locks (*note File Locks::),
open file description record locks are associated with an open file
description rather than a process.

   Using ‘fcntl’ to apply an open file description lock on a region that
already has an existing open file description lock that was created via
the same file descriptor will never cause a lock conflict.

   Open file description locks are also inherited by child processes
across ‘fork’, or ‘clone’ with ‘CLONE_FILES’ set (*note Creating a
Process::), along with the file descriptor.

   It is important to distinguish between the open file _description_
(an instance of an open file, usually created by a call to ‘open’) and
an open file _descriptor_, which is a numeric value that refers to the
open file description.  The locks described here are associated with the
open file _description_ and not the open file _descriptor_.

   Using ‘dup’ (*note Duplicating Descriptors::) to copy a file
descriptor does not give you a new open file description, but rather
copies a reference to an existing open file description and assigns it
to a new file descriptor.  Thus, open file description locks set on a
file descriptor cloned by ‘dup’ will never conflict with open file
description locks set on the original descriptor since they refer to the
same open file description.  Depending on the range and type of lock
involved, the original lock may be modified by a ‘F_OFD_SETLK’ or
‘F_OFD_SETLKW’ command in this situation however.

   Open file description locks always conflict with process-associated
locks, even if acquired by the same process or on the same open file
descriptor.

   Open file description locks use the same ‘struct flock’ as
process-associated locks as an argument (*note File Locks::) and the
macros for the ‘command’ values are also declared in the header file
‘fcntl.h’.  To use them, the macro ‘_GNU_SOURCE’ must be defined prior
to including any header file.

   In contrast to process-associated locks, any ‘struct flock’ used as
an argument to open file description lock commands must have the ‘l_pid’
value set to 0.  Also, when returning information about an open file
description lock in a ‘F_GETLK’ or ‘F_OFD_GETLK’ request, the ‘l_pid’
field in ‘struct flock’ will be set to -1 to indicate that the lock is
not associated with a process.

   When the same ‘struct flock’ is reused as an argument to a
‘F_OFD_SETLK’ or ‘F_OFD_SETLKW’ request after being used for an
‘F_OFD_GETLK’ request, it is necessary to inspect and reset the ‘l_pid’
field to 0.

 -- Macro: int F_OFD_GETLK
     This macro is used as the COMMAND argument to ‘fcntl’, to specify
     that it should get information about a lock.  This command requires
     a third argument of type ‘struct flock *’ to be passed to ‘fcntl’,
     so that the form of the call is:

          fcntl (FILEDES, F_OFD_GETLK, LOCKP)

     If there is a lock already in place that would block the lock
     described by the LOCKP argument, information about that lock is
     written to ‘*LOCKP’.  Existing locks are not reported if they are
     compatible with making a new lock as specified.  Thus, you should
     specify a lock type of ‘F_WRLCK’ if you want to find out about both
     read and write locks, or ‘F_RDLCK’ if you want to find out about
     write locks only.

     There might be more than one lock affecting the region specified by
     the LOCKP argument, but ‘fcntl’ only returns information about one
     of them.  Which lock is returned in this situation is undefined.

     The ‘l_whence’ member of the LOCKP structure are set to ‘SEEK_SET’
     and the ‘l_start’ and ‘l_len’ fields are set to identify the locked
     region.

     If no conflicting lock exists, the only change to the LOCKP
     structure is to update the ‘l_type’ field to the value ‘F_UNLCK’.

     The normal return value from ‘fcntl’ with this command is either 0
     on success or -1, which indicates an error.  The following ‘errno’
     error conditions are defined for this command:

     ‘EBADF’
          The FILEDES argument is invalid.

     ‘EINVAL’
          Either the LOCKP argument doesn’t specify valid lock
          information, the operating system kernel doesn’t support open
          file description locks, or the file associated with FILEDES
          doesn’t support locks.

 -- Macro: int F_OFD_SETLK
     This macro is used as the COMMAND argument to ‘fcntl’, to specify
     that it should set or clear a lock.  This command requires a third
     argument of type ‘struct flock *’ to be passed to ‘fcntl’, so that
     the form of the call is:

          fcntl (FILEDES, F_OFD_SETLK, LOCKP)

     If the open file already has a lock on any part of the region, the
     old lock on that part is replaced with the new lock.  You can
     remove a lock by specifying a lock type of ‘F_UNLCK’.

     If the lock cannot be set, ‘fcntl’ returns immediately with a value
     of -1.  This command does not wait for other tasks to release
     locks.  If ‘fcntl’ succeeds, it returns 0.

     The following ‘errno’ error conditions are defined for this
     command:

     ‘EAGAIN’
          The lock cannot be set because it is blocked by an existing
          lock on the file.

     ‘EBADF’
          Either: the FILEDES argument is invalid; you requested a read
          lock but the FILEDES is not open for read access; or, you
          requested a write lock but the FILEDES is not open for write
          access.

     ‘EINVAL’
          Either the LOCKP argument doesn’t specify valid lock
          information, the operating system kernel doesn’t support open
          file description locks, or the file associated with FILEDES
          doesn’t support locks.

     ‘ENOLCK’
          The system has run out of file lock resources; there are
          already too many file locks in place.

          Well-designed file systems never report this error, because
          they have no limitation on the number of locks.  However, you
          must still take account of the possibility of this error, as
          it could result from network access to a file system on
          another machine.

 -- Macro: int F_OFD_SETLKW
     This macro is used as the COMMAND argument to ‘fcntl’, to specify
     that it should set or clear a lock.  It is just like the
     ‘F_OFD_SETLK’ command, but causes the process to wait until the
     request can be completed.

     This command requires a third argument of type ‘struct flock *’, as
     for the ‘F_OFD_SETLK’ command.

     The ‘fcntl’ return values and errors are the same as for the
     ‘F_OFD_SETLK’ command, but these additional ‘errno’ error
     conditions are defined for this command:

     ‘EINTR’
          The function was interrupted by a signal while it was waiting.
          *Note Interrupted Primitives::.

   Open file description locks are useful in the same sorts of
situations as process-associated locks.  They can also be used to
synchronize file access between threads within the same process by
having each thread perform its own ‘open’ of the file, to obtain its own
open file description.

   Because open file description locks are automatically freed only upon
closing the last file descriptor that refers to the open file
description, this locking mechanism avoids the possibility that locks
are inadvertently released due to a library routine opening and closing
a file without the application being aware.

   As with process-associated locks, open file description locks are
advisory.