0545e9dc6d
commit d1edce71135cc6d98c0a4b5729774542b676e769 Author: sophgo-forum-service <forum_service@sophgo.com> Date: Fri Mar 15 16:07:33 2024 +0800 [fix] recommend using ssh method to clone repo. [fix] fix sensor driver repo branch name.
41 lines
1.4 KiB
Plaintext
41 lines
1.4 KiB
Plaintext
What: /sys/class/power_supply/wilco-charger/charge_type
|
|
Date: April 2019
|
|
KernelVersion: 5.2
|
|
Description:
|
|
What charging algorithm to use:
|
|
|
|
Standard:
|
|
Fully charges battery at a standard rate.
|
|
Adaptive:
|
|
Battery settings adaptively optimized based on
|
|
typical battery usage pattern.
|
|
Fast:
|
|
Battery charges over a shorter period.
|
|
Trickle:
|
|
Extends battery lifespan, intended for users who
|
|
primarily use their Chromebook while connected to AC.
|
|
Custom:
|
|
A low and high threshold percentage is specified.
|
|
Charging begins when level drops below
|
|
charge_control_start_threshold, and ceases when
|
|
level is above charge_control_end_threshold.
|
|
Long Life:
|
|
Customized charge rate for last longer battery life.
|
|
On Wilco device this mode is pre-configured in the factory
|
|
through EC's private PID. Swiching to a different mode will
|
|
be denied by Wilco EC when Long Life mode is enabled.
|
|
|
|
What: /sys/class/power_supply/wilco-charger/charge_control_start_threshold
|
|
Date: April 2019
|
|
KernelVersion: 5.2
|
|
Description:
|
|
Used when charge_type="Custom", as described above. Measured in
|
|
percentages. The valid range is [50, 95].
|
|
|
|
What: /sys/class/power_supply/wilco-charger/charge_control_end_threshold
|
|
Date: April 2019
|
|
KernelVersion: 5.2
|
|
Description:
|
|
Used when charge_type="Custom", as described above. Measured in
|
|
percentages. The valid range is [55, 100].
|