Files
SDK_SG200x_V2/u-boot-2021.10/doc/board/nxp/imx8mp_evk.rst
carbon 0545e9dc6d init version 2024-05-07
commit d1edce71135cc6d98c0a4b5729774542b676e769
Author: sophgo-forum-service <forum_service@sophgo.com>
Date:   Fri Mar 15 16:07:33 2024 +0800

    [fix] recommend using ssh method to clone repo.
    [fix] fix sensor driver repo branch name.
2024-05-07 19:36:36 +08:00

62 lines
1.6 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0+
imx8mp_evk
==========
U-Boot for the NXP i.MX8MP EVK board
Quick Start
-----------
- Build the ARM Trusted firmware binary
- Get the firmware-imx package
- Build U-Boot
- Boot
Get and Build the ARM Trusted firmware
--------------------------------------
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_5.4.70_2.3.0
.. code-block:: bash
$ make PLAT=imx8mp bl31
Get the ddr firmware
--------------------
.. code-block:: bash
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.bin
$ chmod +x firmware-imx-8.10.bin
$ ./firmware-imx-8.10.bin
Build U-Boot
------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make O=build imx8mp_evk_defconfig
$ cp ../imx-atf/build/imx8mp/release/bl31.bin ./build/bl31.bin
$ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_202006.bin ./build/
$ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_202006.bin ./build/
$ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_202006.bin ./build/
$ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_202006.bin ./build/
$ export ATF_LOAD_ADDR=0x970000
$ make O=build
Burn the flash.bin to the MicroSD card at offset 32KB:
.. code-block:: bash
$sudo dd if=build/flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync
$sudo dd if=build/u-boot.itb of=/dev/sd[x] bs=1K seek=384 conv=notrunc; sync
Boot
----
Set Boot switch to SD boot
Use /dev/ttyUSB2 for U-Boot console