px3se: Add board config and parameter

Nand flash use squashfs as default, and parameter adjusted
accordingly.

Change-Id: Ia6fddbc39a906f39b499b37ec03695ce3a8dfff1
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>

px3se/BoardConfig_nand.mk

@@ -0,0 +1,38 @@
+#!/bin/bash
+
+# Target arch
+export RK_ARCH=arm
+# Uboot defconfig
+export RK_UBOOT_DEFCONFIG=evb-px3se
+# Kernel defconfig
+export RK_KERNEL_DEFCONFIG=rockchip_linux_defconfig
+# Kernel dts
+export RK_KERNEL_DTS=px3se-evb
+# boot image type
+export RK_BOOT_IMG=zboot.img
+# parameter for GPT table
+export RK_PARAMETER=parameter-nand.txt
+# Buildroot config
+export RK_CFG_BUILDROOT=rockchip_px3se_nand
+# Recovery config
+export RK_CFG_RECOVERY=rockchip_px3se_recovery
+# Pcba config
+export RK_CFG_PCBA=rockchip_px3se_pcba
+# Build jobs
+export RK_JOBS=12
+# target chip
+export RK_TARGET_PRODUCT=px3se
+# Set rootfs type, including ext2 ext4 squashfs
+export RK_ROOTFS_TYPE=squashfs
+# rootfs image path
+export RK_ROOTFS_IMG=buildroot/output/$RK_CFG_BUILDROOT/images/rootfs.$RK_ROOTFS_TYPE
+# Set oem partition type, including ext2 squashfs
+export RK_OEM_FS_TYPE=ext2
+# Set userdata partition type, including ext2, fat
+export RK_USERDATA_FS_TYPE=ext2
+# Set flash type. support <emmc, nand, spi_nand, spi_nor>
+export RK_STORAGE_TYPE=nand
+#OEM config: /oem/dueros/aispeech/iflytekSDK/CaeDemo_VAD/smart_voice
+export RK_OEM_DIR=oem_empty
+#userdata config
+export RK_USERDATA_DIR=userdata_empty

px3se/parameter-nand.txt

@@ -0,0 +1,12 @@
+FIRMWARE_VER: 8.1
+MACHINE_MODEL: RK3128
+MACHINE_ID: 007
+MANUFACTURER: RK3128
+MAGIC: 0x5041524B
+ATAG: 0x00200800
+MACHINE: 3128
+CHECK_MASK: 0x80
+PWR_HLD: 0,0,A,0,1
+TYPE: GPT
+CMDLINE: mtdparts=rk29xxnand:0x00002000@0x00004000(uboot),0x00002000@0x00006000(trust),0x00002000@0x00008000(misc),0x00006000@0x0000a000(boot),0x0000a000@0x00010000(recovery),0x00002000@0x0001a000(backup),0x00002000@0x0001c000(oem),0x00010000@0x0001e000(rootfs),-@0x0002e000(userdata:grow)
+uuid:rootfs=614e0000-0000-4b53-8000-1d28000054a9