rv1108: BoardConfig: update BoardConfig.mk

The default BoardConfig.mk is too old to lead mistakes to our customers.
So let's update it in this patch. The new BoardConfig.mk is synced from
BoardConfig-minievb-v10.mk by the following command:

cp BoardConfig-minievb-v10.mk BoardConfig.mk

Change-Id: Iec7a80b2c151c0eec1c26b6326664392de253a75
Signed-off-by: Zhichao Yu <zhichao.yu@rock-chips.com>

rv1108/BoardConfig.mk

@@ -1,58 +1,85 @@
 #!/bin/bash
 
+########################################
+#              Chip Info               #
+########################################
 # Target arch
 export RK_ARCH=arm
-# Uboot defconfig
-#export RK_UBOOT_DEFCONFIG=rv1108
-# Kernel defconfig
-export RK_KERNEL_DEFCONFIG=rv1108-lock-evb-v10_defconfig
-# Kernel dts
-export RK_KERNEL_DTS=rv1108-lock-evb-v10
-# boot image type
-#export RK_BOOT_IMG=zboot.img
-# kernel image path
-export RK_KERNEL_IMG=kernel/arch/arm/boot/Image
-# parameter for GPT table
-#export RK_PARAMETER=parameter-64bit.txt
-# setting.ini for firmware
-export RK_SETTING_INI=setting-emmc.ini
-# Buildroot config
-export RK_CFG_BUILDROOT=rockchip_rv1108_lock_defconfig
-# Recovery config
-#export RK_CFG_RECOVERY=rockchip_rk3308_recovery
-# ramboot config
-#export RK_CFG_RAMBOOT=
-# Pcba config
-#export RK_CFG_PCBA=rockchip_rk3308_pcba
-# Build jobs
-export RK_JOBS=12
 # target chip
 export RK_TARGET_PRODUCT=rv1108
+
+########################################
+#             Board Info               #
+########################################
+#Target Board Version
+export RK_TARGET_BOARD_VERSION=minievb-v10
+# Set flash type. support <emmc, nand, nor>
+export RK_STORAGE_TYPE=nor
+# Set depth camera
+export RK_HAS_DEPTH_CAMERA=n
+
+########################################
+#           Buildroot Config           #
+########################################
+# Buildroot config
+export RK_CFG_BUILDROOT=rockchip_rv1108_lock_defconfig
+
+########################################
+#            Rootfs Config             #
+########################################
 # Set rootfs type, including ext2 ext4 squashfs
-export RK_ROOTFS_TYPE=cpio.lzo
-# rootfs image path
-export RK_ROOTFS_IMG=rockdev/rootfs.${RK_ROOTFS_TYPE}
-# Set oem partition type, including ext2 squashfs
-#export RK_OEM_FS_TYPE=ext2
-# Set userdata partition type, including ext2, fat
-#export RK_USERDATA_FS_TYPE=ext2
-# Set flash type. support <emmc, nand, spi_nand, spi_nor>
-export RK_STORAGE_TYPE=emmc
-#OEM config: /oem/dueros/aispeech-6mic-64bit/aispeech-2mic-64bit/aispeech-4mic-32bit/aispeech-2mic-32bit/aispeech-2mic-kongtiao-32bit/iflytekSDK/CaeDemo_VAD/smart_voice
-#export RK_OEM_DIR=oem
-#userdata config
-export RK_USERDATA_FILESYSTEM_TYPE=ext4
-export RK_USERDATA_FILESYSTEM_SIZE=32M
-export RK_USERDATA_DIR=common/userdata
-#MIC_NUM=6
-#misc image
-#export RK_MISC=wipe_all-misc.img
-#choose enable distro module
-#export RK_DISTRO_MODULE=
-#choose enable Linux A/B
-#export RK_LINUX_AB_ENABLE=
-export RK_LOADER_POWER_HOLD_GPIO_GROUP=3
-export RK_LOADER_POWER_HOLD_GPIO_INDEX=12
+export RK_ROOTFS_TYPE=cpio.lz4
+
+########################################
+#            Loader Config             #
+########################################
+# Set loader config
+export RK_LOADER_POWER_HOLD_GPIO_GROUP=none
+export RK_LOADER_POWER_HOLD_GPIO_INDEX=none
 export RK_LOADER_EMMC_TURNING_DEGREE=0
 export RK_LOADER_BOOTPART_SELECT=0
+export RK_LOADER_PREISP_EN=0
 
+########################################
+#            Kernel Config             #
+########################################
+# Kernel defconfig
+export RK_KERNEL_DEFCONFIG=rv1108_defconfig
+# Kernel dts
+export RK_KERNEL_DTS=rv1108-${RK_TARGET_BOARD_VERSION}
+
+########################################
+#           Userdata Config            #
+########################################
+# Set userdata config
+export RK_USERDATA_FILESYSTEM_TYPE=jffs2
+export RK_USERDATA_FILESYSTEM_SIZE=6M
+
+########################################
+#             Root Config              #
+########################################
+# Set root data config
+export RK_ROOT_FILESYSTEM_TYPE=jffs2
+export RK_ROOT_FILESYSTEM_SIZE=6M
+
+########################################
+#            Firmware Config           #
+########################################
+# setting.ini for firmware
+export RK_SETTING_INI=setting.ini
+
+########################################
+#            Build Config              #
+########################################
+# Build jobs
+export RK_JOBS=12
+
+########################################
+#              APP Config              #
+########################################
+#Set ui_resolution
+export RK_UI_RESOLUTION=1280x720
+# Set UVC source
+export RK_UVC_USE_SL_MODULE=n
+# Set first start application
+export RK_FIRST_START_APP="lock_app system_manager face_service uvc_app"