Commit Graph

24 Commits

Author SHA1 Message Date
d47df63393 drm/panel: simple: Add AVIC TM070DDH03 panel support
The Shanghai AVIC Optoelectronics TM070DDH03 is a 7" 1024x600 TFT LCD
panel connecting to a 24-bit RGB LVDS interface.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-28 08:45:39 +01:00
d435a2af12 drm/panel: simple: Add support for Giantplus GPG482739QS5
This patch adds support for the GiantPlus GPG48273QS5 4.3" WQVGA TFT LCD
panel to the simple-panel driver.

This panel is connected via a parallel bus and uses both HSYNC and
VSYNC, whose lengths are unfortunately not clearly defined. The
datasheet only specifies the front- and backporch length, but the timing
diagram suggests that both sync signals should be asserted for exactly
one clock cycle.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-28 08:45:38 +01:00
1976dbca04 drm/panel: Add Sharp LQ101R1SX01 support
This panel requires dual-channel mode. The device accepts command-mode
data on 8 lanes and will therefore need a dual-channel DSI controller.
The two interfaces that make up this device need to be instantiated in
the controllers that gang up to provide the dual-channel DSI host.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:56:19 +01:00
61ac0bf89d drm/panel: simple: Add support for Hitachi TX23D38VM0CAA
The Hitachi TX23D38VM0CAA is a 9" WVGA TFT LCD panel and can be
supported by the simple-panel driver.

This panel is connected via LVDS and uses the data enable signal for
timing. Since HSYNC/VSYNC are ignored, the split between sync length and
porches is arbitrary, as long as the complete horizontal blanking interval
is 256 clocks, and the vertical blanking interval is 45 lines.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 10:04:23 +01:00
d731f661b5 drm/panel: simple: Add support for Innolux G121I1-L01
The Innolux G121I1-L01 is a 12.1" TFT LCD panel and can be supported by
the simple-panel driver.

This panel is connected via LVDS and uses the data enable signal for
timing. Since HSYNC/VSYNC are ignored, the split between sync length and
porches is arbitrary, as long as the complete horizontal blanking interval
is 160 clocks, and the vertical blanking interval is 24 lines.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 10:04:19 +01:00
e35e305eff drm/panel: simple: Add AUO B116XW03 panel support
The AUO B116XW03 is a 11.6" HD TFT LCD panel connecting to a LVDS
interface and with an integrated LED backlight unit.

This panel is used on the Samsung Chromebook(XE303C12).

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
[treding@nvidia.com: add missing .bpc field]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 09:58:55 +01:00
a853205efb drm/panel: simple: Add HannStar HSD070PWW1 7.0" WXGA TFT LCD panel
This patch adds support for the HannStar Display Corp. HSD070PWW1 7.0"
WXGA TFT LCD panel to the simple-panel driver. The binding documentation
is included.
This panel is connected via LVDS and uses the data enable signal for
timing. Since HSYNC/VSYNC are ignored, the split between sync length and
porches is arbitrary, as long as the complete horizontal blanking interval
is 160 clocks, and the vertical blanking interval is 23 lines.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 09:58:54 +01:00
dac746e04e drm/panel/simple: add optronics B101XTN01.0 (v3)
LVDS panel, make/model described as:

AU Optronics Corporation - B101XTN01.0 (H/W:0A)

See:
http://www.encore-electronic.com/media/B101XTN01.0.pdf

Tested with panel attached to an Inforce IFC6410 board.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-09-10 11:19:07 -04:00
3e51d60932 drm/panel: simple: Add AUO B133HTN01 panel support
The AUO B133HTN01 is a 13.6" FHD TFT LCD panel connecting to an eDP
interface and with an integrated LED backlight unit.

This panel is used on the Samsung Chromebook 2 (XE503C32).

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-06 16:44:15 +02:00
0a2288c06a drm/panel: simple: Add Innolux N116BGE panel support
The Innolux N116BGE is an 11.6" WXGA TFT LCD panel connecting to an eDP
interface and with an integrated LED backlight unit.

It is used in the Tegra132 Norrin reference design.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-06 16:44:04 +02:00
ea44739db3 drm/panel: simple: add support for InnoLux N156BGE-L21 panel
This panel is used by the Medcom Wide and supported by the
simple-panel driver.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-22 09:10:53 +02:00
102932b0e4 drm/panel: add support for Foxlink FL500WVR00-A0T panel
This panel is used by Atmel's SAMA5D3 Evaluation Kits (sama5d3xek) and
supported by the simple-panel driver.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-15 12:40:19 +02:00
a333f7ad1d drm/panel: simple - Add AUO B133XTN01 panel support
This panel is used by nyan-big and can be supported by the simple-panel
driver.

Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
[treding@nvidia.com: add device tree binding document]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-09 12:17:21 +02:00
26ab006579 drm/panel: add support for EDT ET057090DHU panel
This panel is sold by Toradex for Colibri T20/T30 and Apalis T30
evaluation kits.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 16:46:40 +02:00
fff5de45ef drm/panel: Add support for EDT ETM0700G0DH6 and ET070080DH6 panels
The EDT ETM0700G0DH6 and ET070080DH6 are 7" 800x480 panels,
which can be supported by the simple panel driver.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 16:46:39 +02:00
243b930f8b Merge tag 'drm/panel/for-3.15-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v3.15-rc1

Add support for a couple more simple panels. A few cleanups to the
simple panel driver are also included (gpiod interface conversion,
removal of redundant call to regulator_disable()).

* tag 'drm/panel/for-3.15-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: add support for LG LD070WX3-SL01 panel
  drm/panel: add support for LG LH500WX1-SD03 panel
  drm/panel: simple: Allow DSI panels to provide mode flags
  drm/panel: simple: Allow GPIO accesses to sleep
  drm/panel: remove redundant regulator_disable()
  drm/panel: use gpiod interface for enable GPIO
  drm/panel: Add LG 12.9" LCD panel
  MAINTAINERS: Add entry for DRM panel drivers

Conflicts:
	MAINTAINERS
2014-04-05 16:12:27 +10:00
88072c39ed panel/ld9040: add DT bindings
The patch adds bindings for ld9040 panel.
Bindings describe panel resources, boot delays,
display timings and physical size.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04 21:24:48 +09:00
86f05ae826 panel/s6e8aa0: add DT bindings
The patch adds bindings for s6e8aa0 panel.
Bindings describes panel resources, boot delays,
display timings, orientation and physical size.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04 21:24:48 +09:00
712ac1ba63 drm/panel: add support for LG LD070WX3-SL01 panel
This panel is used by Tegra Note 7 and supported by the simple-panel
driver.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04 09:06:40 +02:00
499ce85af9 drm/panel: add support for LG LH500WX1-SD03 panel
This panel is used by the NVIDIA SHIELD and supported by the
simple-panel driver.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04 09:06:40 +02:00
ec7c565383 drm/panel: Add LG 12.9" LCD panel
The LP129QE LCD has an LED backlight and a display resolution of
2560x1700 pixels.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04 09:06:34 +02:00
4c9307577e drm/panel: Add support for Chunghwa CLAA101WA01A panel
The Chunghwa CLAA101WA01A is a 10.1" 1366x768 panel, which can be
supported by the simple panel driver.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-01-08 16:13:57 +01:00
6d54e3d275 drm/panel: Add support for Samsung LTN101NT05 panel
The Samsung LNT101NT05 10.1" WXVGA panel can be supported by the simple panel
driver.

Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-01-08 16:12:33 +01:00
d95f95eb96 of: Add simple panel device tree binding
This binding specifies a set of common properties for display panels. It
can be used as a basis by bindings for specific panels.

Bindings for three specific panels are provided to show how the simple
panel binding can be used.

Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-17 18:09:40 +01:00