[Mod] CMT2310 初始化完成

1. 使用系统延时实现硬件抽象层us、ms延时；
2. 完成SPI初始化、收发实现；

NSPE/WIFI_IOT/app/app_cfg.h

@@ -114,6 +114,8 @@ OF SUCH DAMAGE.
 #define ALICLOUD_TASK_PRIO                     TASK_PRIO_APP_BASE
 #endif
 
+//#define CONFIG_TASK_LED
+
 #ifdef CONFIG_IPERF_TEST
 #define IPERF_TASK_MAX                         1
 

NSPE/WIFI_IOT/app/main.c

@@ -82,7 +82,7 @@ void do_ram_code_copy(void)
 }
 #endif
 
-#if defined (CONFIG_GY3513)
+#if defined (CONFIG_TASK_LED)
 static int32_t led_init(void)
 {
     gd_eval_led_init(LED1);
@@ -104,7 +104,7 @@ void led_task(void *p_arg)
 
     sys_task_delete(NULL);
 }
-#endif // CONFIG_GY3513
+#endif // CONFIG_TASK_LED
 
 /*!
     \brief      initialize application
@@ -168,14 +168,14 @@ void start_task(void *p_arg)
 */
 int main(void)
 {
-#if defined (CONFIG_GY3513)
+#if defined (CONFIG_TASK_LED)
     TaskHandle_t *stTaskHndl_led = NULL;
-#endif // CONFIG_GY3513
+#endif // CONFIG_TASK_LED
 
     platform_init();
-#if defined (CONFIG_GY3513)
+#if defined (CONFIG_TASK_LED)
     led_init();
-#endif // CONFIG_GY3513
+#endif // CONFIG_TASK_LED
 
     DEBUGPRINT("SDK git revision: "WIFI_GIT_REVISION" \r\n");
     DEBUGPRINT("SDK version: V%d.%d.%d\r\n", (RE_NSPE_VERSION >> 24), ((RE_NSPE_VERSION & 0xFF0000) >> 16), (RE_NSPE_VERSION & 0xFFFF));
@@ -187,7 +187,7 @@ int main(void)
 
     systick_delay_init();
 
-#if defined (CONFIG_GY3513)
+#if defined (CONFIG_TASK_LED)
     #define LED_TASK_STK_SIZE       256
     #define LED_TASK_PRIO           (TASK_PRIO_APP_BASE + TASK_PRIO_HIGHER(1))
 
@@ -195,7 +195,7 @@ int main(void)
     if (stTaskHndl_led == NULL) {
         DEBUG_ERROR("Error, task create failed.\r\n");
     }
-#endif // CONFIG_GY3513
+#endif // CONFIG_TASK_LED
 
     if (NULL == sys_task_create(NULL, (const uint8_t *)"sub1g_task", NULL, START_TASK_STK_SIZE, 0, START_TASK_PRIO, sub1g_task, NULL)) {
         DEBUGPRINT("ERROR: create start task failed\r\n");

NSPE/WIFI_IOT/bsp/bsp_gd32w51x.c

@@ -735,6 +735,5 @@ void platform_init(void)
     gdm3210x_fpga_init();
 #elif CONFIG_PLATFORM == PLATFORM_ASIC_32W51X
     gd32w51x_asic_init();
-
 #endif
 }

NSPE/WIFI_IOT/bsp/drivers/0_Project/IAR_for_Stm8/Uart_PingPong/ebyte/ebyte_port.c

@@ -23,6 +23,7 @@
 
 /*= !!!<21><><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF>Ӳ<EFBFBD><D3B2>ƽ̨ͷ<CCA8>ļ<EFBFBD> =======================================*/
 #include "board.h"  //E15-EVB02 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+#include "wrapper_os.h"
 /*==================================================================*/
 
 /* !
@@ -77,22 +78,20 @@ void Ebyte_Port_SpiCsIoControl( uint8e_t cmd )
 void Ebyte_Port_DelayMs( uint16e_t time )
 {
     /* !<21><><EFBFBD><EFBFBD><EFBFBD>ṩ: <20><>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD> */
+    sys_ms_sleep(time);
+}
 
-    uint16e_t i,n;
 
-    while(time--)//<2F><><EFBFBD><EFBFBD>ʾ<EFBFBD><CABE><EFBFBD><EFBFBD>STM8L 16Mʱ<4D><CAB1>ǰ<EFBFBD><C7B0><EFBFBD>µĴ<C2B5><C4B4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ
+/* !
+ * @brief <20><><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF>Ӳ<EFBFBD><D3B2>ƽ̨<C6BD><CCA8>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>
+ *
+ * @param time <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>
+ * @note <20><>ע<EFBFBD><D7A2>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>ģ<EFBFBD><C4A3><EFBFBD><EFBFBD>ʼ<EFBFBD><CABC>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD><EFBFBD>ô˺<C3B4><CBBA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ע<EFBFBD><D7A2><EFBFBD>ж<EFBFBD><D0B6>Ƿ<EFBFBD><C7B7><EFBFBD>Ӱ<EFBFBD>쵽<EFBFBD>˺<EFBFBD><CBBA><EFBFBD>
+ */
+void Ebyte_Port_DelayUs( uint16e_t time )
 {
-        for(i=900;i>0;i--)
-        {
-              for( n=1 ;n>0 ;n--) {
-                __NOP();
-                __NOP();
-                __NOP();
-                __NOP();
-              }
-        }
-    }
+    /* !<21><><EFBFBD><EFBFBD><EFBFBD>ṩ: <20><>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD> */
+    sys_us_delay(time);
 }
 
 
-

NSPE/WIFI_IOT/bsp/drivers/0_Project/IAR_for_Stm8/Uart_PingPong/ebyte/ebyte_port.h

@@ -24,6 +24,7 @@ void Ebyte_Port_RstIoControl( uint8e_t cmd );
 void Ebyte_Port_TxenIoControl( uint8e_t cmd );
 void Ebyte_Port_RxenIoControl( uint8e_t cmd );
 void Ebyte_Port_DelayMs( uint16e_t time );
+void Ebyte_Port_DelayUs( uint16e_t time );
 void Ebyte_Port_SpiCsIoControl( uint8e_t cmd );
 
 uint8e_t Ebyte_Port_BusyIoRead( void );

NSPE/WIFI_IOT/bsp/drivers/0_Project/IAR_for_Stm8/Uart_PingPong/main.c

@@ -59,11 +59,11 @@ static BSP_BTN_EVENT_t BTN_Event;
 int ebyte_main( void )
 {
     /* <20><><EFBFBD><EFBFBD>Ӳ<EFBFBD><D3B2><EFBFBD><EFBFBD>Դ <20><>ʼ<EFBFBD><CABC> */
-//    Ebyte_BSP_Init();
+    Ebyte_BSP_Init();
     /* (<28><>ѡ) <20><><EFBFBD><EFBFBD><EFBFBD>жϽ<D0B6><CFBD><EFBFBD>FIFO <20>ɸ<EFBFBD><C9B8><EFBFBD><EFBFBD><EFBFBD>Ҫ<EFBFBD><D2AA><EFBFBD>д<EFBFBD><D0B4><EFBFBD> */
-//    Ebyte_FIFO_Init( &hfifo, EBYTE_FIFO_SIZE );
+    Ebyte_FIFO_Init( &hfifo, EBYTE_FIFO_SIZE );
     /* EBYTE <20><><EFBFBD><EFBFBD>ģ<EFBFBD><C4A3><EFBFBD><EFBFBD>ʼ<EFBFBD><CABC> */
-//    Ebyte_RF.Init();
+    Ebyte_RF.Init();
      /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ģ<EFBFBD><C4A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
 //    Ebyte_RF.EnterReceiveMode( 0 );
     /* MCU <20><>ȫ<EFBFBD><C8AB><EFBFBD>ж<EFBFBD> */

NSPE/WIFI_IOT/bsp/drivers/2_Ebyte_Board_Support/E15-EVB02/board.c

@@ -22,6 +22,7 @@
 #include "board.h"
 #include "ebyte_port.h"
 #include "ebyte_conf.h"
+#include "gd32w51x_gpio.h"
 #include "platform_def.h"
 
 BSP_BTN_FIFO_t BSP_BTN_FIFO;
@@ -45,11 +46,13 @@ void Ebyte_BSP_HSI_Init(void)
 
 void Ebyte_BSP_E48xGPIO_Init(void)
 {
-//    GPIO_Init( BSP_GPIO_PORT_E48_GP0, BSP_GPIO_PIN_E48_GP0, GPIO_Mode_In_PU_No_IT );
-//    GPIO_Init( BSP_GPIO_PORT_E48_NIRQ, BSP_GPIO_PIN_E48_NIRQ, GPIO_Mode_In_PU_No_IT );
-//    GPIO_Init( BSP_GPIO_PORT_E48_GP3, BSP_GPIO_PIN_E48_GP3, GPIO_Mode_In_PU_No_IT );
-//    GPIO_Init( BSP_GPIO_PORT_E48_GP4, BSP_GPIO_PIN_E48_GP4, GPIO_Mode_In_FL_No_IT );
-//    GPIO_Init( BSP_GPIO_PORT_E48_GP5, BSP_GPIO_PIN_E48_GP5, GPIO_Mode_In_PU_No_IT );
+    rcu_periph_clock_enable(BSP_GPIO_RCU_E48_GPIO);
+
+    gpio_mode_set( BSP_GPIO_PORT_E48_GP0,  GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, BSP_GPIO_PIN_E48_GP0);
+    gpio_mode_set( BSP_GPIO_PORT_E48_NIRQ, GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, BSP_GPIO_PIN_E48_NIRQ);
+    gpio_mode_set( BSP_GPIO_PORT_E48_GP3,  GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, BSP_GPIO_PIN_E48_GP3);
+    gpio_mode_set( BSP_GPIO_PORT_E48_GP4,  GPIO_MODE_INPUT, GPIO_PUPD_NONE,   BSP_GPIO_PIN_E48_GP4);
+    gpio_mode_set( BSP_GPIO_PORT_E48_GP5,  GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, BSP_GPIO_PIN_E48_GP5);
 }
 /* !
  * @brief <20><>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD><EFBFBD><EFBFBD>IO
@@ -58,15 +61,19 @@ void Ebyte_BSP_E48xGPIO_Init(void)
  */
 void Ebyte_BSP_GPIO_Init(void)
 {
-//    /* <20><><EFBFBD><EFBFBD>ģ<EFBFBD><C4A3>״̬<D7B4><CCAC><EFBFBD><EFBFBD> */
-//    Ebyte_BSP_E48xGPIO_Init();
-//    /* LED */
-//    GPIO_Init( BSP_GPIO_PORT_LED_1, BSP_GPIO_PIN_LED_1, GPIO_Mode_Out_PP_Low_Slow );
-//    GPIO_Init( BSP_GPIO_PORT_LED_2, BSP_GPIO_PIN_LED_2, GPIO_Mode_Out_PP_Low_Slow );
-//
-//    /* <20><><EFBFBD><EFBFBD> */
-//    GPIO_Init( BSP_GPIO_PORT_BUTTON_1, BSP_GPIO_PIN_BUTTON_1, GPIO_Mode_In_PU_No_IT );
-//
+    /* <20><><EFBFBD><EFBFBD>ģ<EFBFBD><C4A3>״̬<D7B4><CCAC><EFBFBD><EFBFBD> */
+    Ebyte_BSP_E48xGPIO_Init();
+
+    /* LED */
+    rcu_periph_clock_enable(BSP_GPIO_RCU_E48_LED);
+    gpio_mode_set( BSP_GPIO_PORT_LED_1, GPIO_MODE_OUTPUT, GPIO_PUPD_PULLUP, BSP_GPIO_PIN_LED_1 );
+    gpio_mode_set( BSP_GPIO_PORT_LED_2, GPIO_MODE_OUTPUT, GPIO_PUPD_PULLUP, BSP_GPIO_PIN_LED_2 );
+    gpio_output_options_set(BSP_GPIO_PORT_LED_1, GPIO_OTYPE_PP, GPIO_OSPEED_25MHZ, BSP_GPIO_PIN_LED_1);
+    gpio_output_options_set(BSP_GPIO_PORT_LED_2, GPIO_OTYPE_PP, GPIO_OSPEED_25MHZ, BSP_GPIO_PIN_LED_2);
+
+    /* Button */
+    rcu_periph_clock_enable(BSP_GPIO_RCU_E48_BUTTON);
+    gpio_mode_set( BSP_GPIO_PORT_BUTTON_1, GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, BSP_GPIO_PIN_BUTTON_1);
 //    GPIO_Init( BSP_GPIO_PORT_BUTTON_2, BSP_GPIO_PIN_BUTTON_2, GPIO_Mode_In_PU_No_IT );
 }
 
@@ -107,26 +114,36 @@ void Ebyte_BSP_ThreeLinesSPI_Init()
  */
 void Ebyte_BSP_SPI_Init( void )
 {
-//    /* ʱ<><CAB1> */
-//    CLK_PeripheralClockConfig( CLK_Peripheral_SPI1, ENABLE);
-//
-//    /* GPIO */
-//    GPIO_Init( BSP_GPIO_PORT_SPI_NSS,  BSP_GPIO_PIN_SPI_NSS,  GPIO_Mode_Out_PP_High_Slow); //Ƭѡ CS
+    spi_parameter_struct spi_init_struct;
+
+    /* ʱ<><CAB1> */
+    rcu_periph_clock_enable(BSP_RF_SPI_CLOCK);
+    rcu_periph_clock_enable(BSP_GPIO_RCU_E48_SPI);
+
+    /* SPI1 GPIO config: SCK/PB13, MISO/PB14, MOSI/PB15 */
+    gpio_af_set(BSP_GPIO_PORT_SPI, GPIO_AF_5, GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15);
+    gpio_mode_set(BSP_GPIO_PORT_SPI, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15);
+    gpio_output_options_set(BSP_GPIO_PORT_SPI, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15);
+
+    /* SPI0_NSS */
+    gpio_mode_set(BSP_GPIO_PORT_SPI, GPIO_MODE_OUTPUT, GPIO_PUPD_PULLUP, BSP_GPIO_PIN_SPI_NSS);        //Ƭѡ CS
+    gpio_output_options_set(BSP_GPIO_PORT_SPI, GPIO_OTYPE_PP, GPIO_OSPEED_25MHZ, BSP_GPIO_PIN_SPI_NSS);
+
 //    GPIO_ExternalPullUpConfig( BSP_GPIO_PORT_SPI_SCK, BSP_GPIO_PIN_SPI_MOSI | BSP_GPIO_PIN_SPI_MISO | BSP_GPIO_PIN_SPI_SCK, ENABLE); // MOSI MISO SCK
-//
-//    /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
-//    SPI_Init(  BSP_RF_SPI,
-//               SPI_FirstBit_MSB,                 //<2F>Ӹ<EFBFBD>λ<EFBFBD><EFBFBD>ʼ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-//               SPI_BaudRatePrescaler_8,          //16M/2 SCK<43><4B><EFBFBD><EFBFBD>
-//               SPI_Mode_Master,                  //<2F><><EFBFBD><EFBFBD>ģʽ
-//               SPI_CPOL_Low,                     //<2F><><EFBFBD><EFBFBD> CPOL=0
-//               SPI_CPHA_1Edge,                   //<EFBFBD><EFBFBD><EFBFBD><EFBFBD> CPHA=0  <20><>һ<EFBFBD><D2BB>ʱ<EFBFBD>ӱ<EFBFBD><D3B1>ز<EFBFBD><D8B2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-//               SPI_Direction_2Lines_FullDuplex,  //ȫ˫<EFBFBD><EFBFBD>
-//               SPI_NSS_Soft,                     //<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ƴӻ<C6B4>CSƬѡ
-//               0x07);                            //CRC<52><43><EFBFBD><EFBFBD>
-//
-//    /* ʹ<EFBFBD><EFBFBD> */
-//    SPI_Cmd( BSP_RF_SPI, ENABLE );
+
+    /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> */
+    spi_init_struct.trans_mode           = SPI_TRANSMODE_FULLDUPLEX;
+    spi_init_struct.device_mode          = SPI_MASTER;                  //<2F><><EFBFBD><EFBFBD>ģʽ
+    spi_init_struct.frame_size           = SPI_FRAMESIZE_8BIT;
+    spi_init_struct.clock_polarity_phase = SPI_CK_PL_LOW_PH_1EDGE;      // Mode0 {CPOL=0, CPHA=0}
+    spi_init_struct.nss                  = SPI_NSS_SOFT;                //<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ƴӻ<EFBFBD>CSƬѡ
+    spi_init_struct.prescale             = SPI_PSC_8;                   //16M/2 SCK<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+    spi_init_struct.endian               = SPI_ENDIAN_MSB;              //<EFBFBD>Ӹ<EFBFBD>λ<EFBFBD><EFBFBD>ʼ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+    spi_init(BSP_RF_SPI, &spi_init_struct);
+
+    /* ʹ<><CAB9> */
+    /* SPI enable */
+    spi_enable(BSP_RF_SPI);
 }
 
 /* !
@@ -138,6 +155,12 @@ void Ebyte_BSP_SPI_Init( void )
  */
 uint8_t Ebyte_BSP_SpiTransAndRecv( uint8_t data )
 {
+    while(RESET == spi_i2s_flag_get(BSP_RF_SPI, SPI_FLAG_TBE));
+    spi_i2s_data_transmit(BSP_RF_SPI, data);
+
+    while(RESET == spi_i2s_flag_get(BSP_RF_SPI, SPI_FLAG_RBNE));
+    return spi_i2s_data_receive(BSP_RF_SPI);
+
 //    BSP_RF_SPI->DR = data;
 //    while ((BSP_RF_SPI->SR & SPI_FLAG_TXE) == RESET);
 //
@@ -154,18 +177,35 @@ uint8_t Ebyte_BSP_SpiTransAndRecv( uint8_t data )
  */
 void Ebyte_BSP_TIMER_Init( void )
 {
-//    /* ʱ<><CAB1> */
-//    CLK_PeripheralClockConfig( CLK_Peripheral_TIM3, ENABLE);
-//
-//    /* <20><><EFBFBD><EFBFBD> */
-//    TIM3_TimeBaseInit( TIM3_Prescaler_128 , TIM3_CounterMode_Up, 124);
-//
-//    /* <20><><EFBFBD><EFBFBD><EFBFBD>ж<EFBFBD> */
-//    TIM3_ClearFlag(TIM3_FLAG_Update);
-//    TIM3_ITConfig(TIM3_IT_Update, ENABLE);
-//
-//    /* ʹ<><CAB9> */
-//    TIM3_Cmd(ENABLE);
+    timer_parameter_struct timer_initpara;
+    /**
+      TIMER2 Configuration:
+      TIMER2CLK = SystemCoreClock/180 = 1MHz.
+      TIMER2 configuration is timing mode, and the timing is 1ms(1000/1 = 1ms).
+     */
+
+    /* enable the peripherals clock */
+    rcu_timer_clock_prescaler_config(RCU_TIMER_PSC_MUL4);
+    rcu_periph_clock_enable(BSP_RF_TIMER_RCU);
+
+    /* deinit a TIMER */
+    timer_deinit(BSP_RF_TIMER);
+    /* initialize TIMER init parameter struct */
+    timer_struct_para_init(&timer_initpara);
+    /* TIMER2 configuration */
+    timer_initpara.prescaler        = 179;
+    timer_initpara.alignedmode      = TIMER_COUNTER_EDGE;
+    timer_initpara.counterdirection = TIMER_COUNTER_UP;
+    timer_initpara.period           = 1000;
+    timer_initpara.clockdivision    = TIMER_CKDIV_DIV1;
+    timer_init(BSP_RF_TIMER, &timer_initpara);
+
+    /* clear interrupt bit */
+    timer_interrupt_flag_clear(BSP_RF_TIMER, TIMER_INT_FLAG_UP);
+    /* enable the TIMER interrupt */
+    timer_interrupt_enable(BSP_RF_TIMER, TIMER_INT_UP);
+    /* enable a TIMER */
+    timer_enable(BSP_RF_TIMER);
 }
 
 /* !
@@ -181,13 +221,13 @@ void Ebyte_BSP_TIMER_Init( void )
 void Ebyte_BSP_Init( void )
 {
     /* ʱ<><CAB1>     <20><>ʼ<EFBFBD><CABC> */
-    Ebyte_BSP_HSI_Init();
+//    Ebyte_BSP_HSI_Init();
 
     /* IO       <20><>ʼ<EFBFBD><CABC> */
     Ebyte_BSP_GPIO_Init();
 
     /* <20><><EFBFBD><EFBFBD>     <20><>ʼ<EFBFBD><CABC> */
-    Ebyte_BSP_UART_Init();
+//    Ebyte_BSP_UART_Init();
 
     /* SPI<50>ӿ<EFBFBD>  <20><>ʼ<EFBFBD><CABC>   */
     Ebyte_BSP_SPI_Init();
@@ -276,8 +316,8 @@ uint8_t Ebyte_BSP_ReadButton( BSP_BUTTON_t btn )
 
     switch ( btn )
     {
-      case BSP_BUTTON_1: result = GPIO_ReadInputDataBit( BSP_GPIO_PORT_BUTTON_1 , BSP_GPIO_PIN_BUTTON_1); break;
-      case BSP_BUTTON_2: result = GPIO_ReadInputDataBit( BSP_GPIO_PORT_BUTTON_2 , BSP_GPIO_PIN_BUTTON_2); break;
+      case BSP_BUTTON_1: result = gpio_input_bit_get( BSP_GPIO_PORT_BUTTON_1 , BSP_GPIO_PIN_BUTTON_1); break;
+//      case BSP_BUTTON_2: result = GPIO_ReadInputDataBit( BSP_GPIO_PORT_BUTTON_2 , BSP_GPIO_PIN_BUTTON_2); break;
       default : break;
     }
 

NSPE/WIFI_IOT/bsp/drivers/2_Ebyte_Board_Support/E15-EVB02/board.h

@@ -28,31 +28,29 @@
 #include "board_mini_printf.h"
 
 /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> LED   */
-#define BSP_GPIO_PORT_LED_1       GPIOC
+#define BSP_GPIO_RCU_E48_LED      RCU_GPIOB
+#define BSP_GPIO_PORT_LED_1       GPIOB
 #define BSP_GPIO_PIN_LED_1        GPIO_PIN_6
 
-#define BSP_GPIO_PORT_LED_2       GPIOC
-#define BSP_GPIO_PIN_LED_2        GPIO_PIN_5
+#define BSP_GPIO_PORT_LED_2       GPIOA
+#define BSP_GPIO_PIN_LED_2        GPIO_PIN_15
 
 /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD> */
+#define BSP_GPIO_RCU_E48_BUTTON   RCU_GPIOA
 #define BSP_GPIO_PORT_BUTTON_1    GPIOA
-#define BSP_GPIO_PIN_BUTTON_1     GPIO_PIN_4
+#define BSP_GPIO_PIN_BUTTON_1     GPIO_PIN_2
 
-#define BSP_GPIO_PORT_BUTTON_2    GPIOA
-#define BSP_GPIO_PIN_BUTTON_2     GPIO_PIN_5
+//#define BSP_GPIO_PORT_BUTTON_2    GPIOA
+//#define BSP_GPIO_PIN_BUTTON_2     GPIO_PIN_5
 
 /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> SPIͨ<49>Žӿ<C5BD> */
-#define BSP_GPIO_PORT_SPI_NSS     GPIOB
-#define BSP_GPIO_PIN_SPI_NSS      GPIO_PIN_4
+#define BSP_GPIO_RCU_E48_SPI     RCU_GPIOB
 
-#define BSP_GPIO_PORT_SPI_MOSI    GPIOB
-#define BSP_GPIO_PIN_SPI_MOSI     GPIO_PIN_6
-
-#define BSP_GPIO_PORT_SPI_MISO    GPIOB
-#define BSP_GPIO_PIN_SPI_MISO     GPIO_PIN_7
-
-#define BSP_GPIO_PORT_SPI_SCK     GPIOB
-#define BSP_GPIO_PIN_SPI_SCK      GPIO_PIN_5
+#define BSP_GPIO_PORT_SPI         GPIOB
+#define BSP_GPIO_PIN_SPI_NSS      GPIO_PIN_12
+#define BSP_GPIO_PIN_SPI_SCK      GPIO_PIN_13
+#define BSP_GPIO_PIN_SPI_MISO     GPIO_PIN_14
+#define BSP_GPIO_PIN_SPI_MOSI     GPIO_PIN_15
 
 /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> ͨ<>Ŵ<EFBFBD><C5B4><EFBFBD> */
 #define BSP_GPIO_PORT_UART_TX     GPIOA
@@ -65,24 +63,28 @@
 
 
 /* E48 */
+#define BSP_GPIO_RCU_E48_GPIO   RCU_GPIOC
+
 #define BSP_GPIO_PORT_E48_GP0   GPIOC
-#define BSP_GPIO_PIN_E48_GP0    GPIO_PIN_1
-#define BSP_GPIO_PORT_E48_NIRQ  GPIOD
-#define BSP_GPIO_PIN_E48_NIRQ   GPIO_PIN_4
+#define BSP_GPIO_PIN_E48_GP0    GPIO_PIN_0
+#define BSP_GPIO_PORT_E48_NIRQ  GPIOC
+#define BSP_GPIO_PIN_E48_NIRQ   GPIO_PIN_1
 #define BSP_GPIO_PORT_E48_GP3   GPIOC
 #define BSP_GPIO_PIN_E48_GP3    GPIO_PIN_3
 #define BSP_GPIO_PORT_E48_GP4   GPIOC
-#define BSP_GPIO_PIN_E48_GP4    GPIO_PIN_1
+#define BSP_GPIO_PIN_E48_GP4    GPIO_PIN_4
 #define BSP_GPIO_PORT_E48_GP5   GPIOC
-#define BSP_GPIO_PIN_E48_GP5    GPIO_PIN_2
-
-
+#define BSP_GPIO_PIN_E48_GP5    GPIO_PIN_5
 
 /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> SPI */
 #define BSP_RF_SPI                  SPI1
-#define BSP_RF_SPI_CLOCK            CLK_Peripheral_SPI1
-#define Ebyte_BSP_RfSpiSelected()   gpio_bit_write( BSP_GPIO_PORT_SPI_NSS , BSP_GPIO_PIN_SPI_NSS, RESET )
-#define Ebyte_BSP_RfSpiUnselected() gpio_bit_write( BSP_GPIO_PORT_SPI_NSS , BSP_GPIO_PIN_SPI_NSS, SET )
+#define BSP_RF_SPI_CLOCK            RCU_SPI1
+#define Ebyte_BSP_RfSpiSelected()   gpio_bit_write( BSP_GPIO_PORT_SPI, BSP_GPIO_PIN_SPI_NSS, RESET )
+#define Ebyte_BSP_RfSpiUnselected() gpio_bit_write( BSP_GPIO_PORT_SPI, BSP_GPIO_PIN_SPI_NSS, SET )
+
+/* <20><><EFBFBD><EFBFBD> Timer  */
+#define BSP_RF_TIMER            TIMER2
+#define BSP_RF_TIMER_RCU        RCU_TIMER2
 
 /* <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD>ģ<EFBFBD><C4A3><EFBFBD><EFBFBD><EFBFBD><EFBFBD>IO */
 

NSPE/WIFI_IOT/bsp/drivers/3_Ebyte_WirelessModule_Drivers/E48xMx/radio_hal.c

@@ -7,13 +7,7 @@ void delay1ms(uint16_t cnt)
 
 void delay10us(uint32_t cnt)
 {
-    uint8_t i;
-
-    while( cnt-- ) {
-        i = 20;
-        while(i--)
-            __NOP();
-    }
+    Ebyte_Port_DelayUs(cnt * 10);
 }
 
 /******************************