63 lines
3.6 KiB
Plaintext
63 lines
3.6 KiB
Plaintext
/*!
|
|
\file readme.txt
|
|
\brief description of running LED example with TZEN = 1
|
|
|
|
\version 2021-10-30, V1.0.0, firmware for GD32W51x
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2021, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
This example is based on the GD32W515P-EVAL-V1.0 board, the project consists of
|
|
two sub-projects, secure project and non-secure project. It shows how to switch from
|
|
secure application to non-secure application, and call secure functions in nonsecure
|
|
application. The led_nonsecure_cfg function is defined in non-secure callable area in
|
|
secure application, and is called by nonsecure application.
|
|
The system always starts from the secure application, and the secure application is
|
|
responsible for starting the nonsecure application. Therefore, in the compilation process,
|
|
first compile the secure project, and then compile the non-secure project
|
|
In secure application, the program execution follows the following steps:
|
|
1.configure SAU/IDAU, FPU and secure/nosecure interrupts allocations in partition_gd32w51x.h file
|
|
the key configuration is as follows:
|
|
Enable SAU
|
|
SAU Region 0 start address: 0x0C03E000 end address: 0xC003FFFF Attributes: S/NSC
|
|
SAU Region 1 start address: 0x08040000 end address: 0x081FFFFF Attributes: NS
|
|
SAU Region 2 start address: 0x20010000 end address: 0x2001FFFF Attributes: NS
|
|
SAU Region 3 start address: 0x40000000 end address: 0x4FFFFFFF Attributes: NS
|
|
2.enable trustzone
|
|
TZEN = 1
|
|
3.configure secure mark pages
|
|
startpage :0x00 endpage:0x3F means that the first 64 pages of flash are configured as secure
|
|
4.configure TZBMPC
|
|
TZBMPC1 vector register y(y=0 to 7):0x00000000 means that SRAM1(64KB) are configured as nonsecure
|
|
5.Setup and jump to non-secure application
|
|
|
|
Non-secure Application :
|
|
In non-secure application, code will first call NSC function led_nonsecure_cfg to configure LED pin to
|
|
nonsecure, then LED1 on, LED2 on, three LEDs can light periodically.
|
|
On the GD32W515P-EVAL-V1.0 board, LED1 connected to PB6, LED2 connected to PA15,LED3 connected to PA8.
|
|
|