SDK_GD32W51x/NSPE/Example/USART/IDLE_receiver_interrupt/main.c

/*!
    \file    main.c
    \brief   USART DMA receive by IDLE interrupt

    \version 2021-10-30, V1.0.0, firmware for GD32W51x
*/

/*
    Copyright (c) 2021, GigaDevice Semiconductor Inc.

    Redistribution and use in source and binary forms, with or without modification, 
are permitted provided that the following conditions are met:

    1. Redistributions of source code must retain the above copyright notice, this 
       list of conditions and the following disclaimer.
    2. Redistributions in binary form must reproduce the above copyright notice, 
       this list of conditions and the following disclaimer in the documentation 
       and/or other materials provided with the distribution.
    3. Neither the name of the copyright holder nor the names of its contributors 
       may be used to endorse or promote products derived from this software without 
       specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGE.
*/

#include "gd32w51x.h"
#include <stdio.h>
#include "gd32w515p_eval.h"

#define USART2_RDATA_ADDRESS      ((uint32_t)&USART_RDATA(USART2))

uint8_t rxbuffer[256];
uint8_t rx_count = 0;
uint8_t tx_count = 0;
__IO uint8_t receive_flag = 0;

void dma_config(void);
void usart_config(void);
void nvic_config(void);

/*!
    \brief      main function
    \param[in]  none
    \param[out] none
    \retval     none
*/
int main(void)
{
    gd_eval_led_init(LED1);
    gd_eval_led_on(LED1);
    nvic_config();
    
    /* initialize DMA */
    dma_config();
    
    /* initialize USART */
    usart_config();
    
    /*wait IDLEF set and clear it*/
    while(RESET == usart_flag_get(EVAL_COM0, USART_FLAG_IDLE));
    usart_flag_clear(EVAL_COM0, USART_FLAG_IDLE);
    usart_interrupt_enable(EVAL_COM0, USART_INT_IDLE);

    /* wait the data is received and send to the hyperterminal */
    while(1){
        if(1 == receive_flag){
            for(tx_count = 0; tx_count < rx_count; tx_count++){
                while(RESET == usart_flag_get(EVAL_COM0, USART_FLAG_TBE));
                usart_data_transmit(EVAL_COM0, rxbuffer[tx_count]);
            }
            receive_flag = 0;
        }
    }
}

/*!
    \brief      DMA configuration
    \param[in]  none
    \param[out] none
    \retval     none
*/
void dma_config(void)
{
    dma_single_data_parameter_struct dma_init_struct;
    rcu_periph_clock_enable(RCU_DMA0);
    dma_deinit(DMA0, DMA_CH1);
    dma_single_data_para_struct_init(&dma_init_struct);
    dma_init_struct.periph_addr = USART2_RDATA_ADDRESS;
    dma_init_struct.periph_inc = DMA_PERIPH_INCREASE_DISABLE;
    dma_init_struct.memory0_addr = (uint32_t)rxbuffer;
    dma_init_struct.memory_inc = DMA_MEMORY_INCREASE_ENABLE;
    dma_init_struct.periph_memory_width = DMA_MEMORY_WIDTH_8BIT;
    dma_init_struct.circular_mode = DMA_CIRCULAR_MODE_DISABLE;
    dma_init_struct.direction = DMA_PERIPH_TO_MEMORY;
    dma_init_struct.number = 256;
    dma_init_struct.priority = DMA_PRIORITY_ULTRA_HIGH;
    dma_single_data_mode_init(DMA0, DMA_CH1, &dma_init_struct);
    
    /* select DMA0 channel1 peripheral */
    dma_channel_subperipheral_select(DMA0, DMA_CH1, DMA_SUBPERI4);
    /* enable DMA0 channel1 */
    dma_channel_enable(DMA0, DMA_CH1);
}

/*!
    \brief      configure USART
    \param[in]  none
    \param[out] none
    \retval     none
*/
void usart_config(void)
{
    /* enable GPIO clock */
    rcu_periph_clock_enable(RCU_GPIOB);

    /* enable USART clock */
    rcu_periph_clock_enable(RCU_USART2);
    
    /* connect port to USART TX */
    gpio_af_set(GPIOB, GPIO_AF_7, GPIO_PIN_10);
    /* connect port to USART RX */
    gpio_af_set(GPIOB, GPIO_AF_7, GPIO_PIN_11);
    
    /* configure USART TX as alternate function push-pull */
    gpio_mode_set(GPIOB, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_10);
    gpio_output_options_set(GPIOB, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, GPIO_PIN_10);

    /* configure USART RX as alternate function push-pull */
    gpio_mode_set(GPIOB, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_11);
    gpio_output_options_set(GPIOB, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, GPIO_PIN_11);

    /* USART configuration */
    usart_deinit(USART2);
    usart_baudrate_set(USART2, 115200U);
    usart_receive_config(USART2, USART_RECEIVE_ENABLE);
    usart_transmit_config(USART2, USART_TRANSMIT_ENABLE);
    usart_dma_enable(USART2, USART_DMA_RECEIVE);
    usart_dma_enable(USART2, USART_DMA_TRANSMIT);
    usart_enable(USART2);
}

/*!
    \brief      configure NVIC
    \param[in]  none
    \param[out] none
    \retval     none
*/
void nvic_config(void)
{
    nvic_irq_enable(USART2_IRQn, 0, 0);
}

/* retarget the C library printf function to the USART */
int fputc(int ch, FILE *f)
{
    usart_data_transmit(EVAL_COM0, (uint8_t)ch);
    while(RESET == usart_flag_get(EVAL_COM0, USART_FLAG_TBE));
    return ch;
}