[Mod] LED 闪烁

Core/Inc/FreeRTOSConfig.h

@@ -0,0 +1,149 @@
+/* USER CODE BEGIN Header */
+/*
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+/* USER CODE END Header */
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * These parameters and more are described within the 'configuration' section of the
+ * FreeRTOS API documentation available on the FreeRTOS.org web site.
+ *
+ * See http://www.freertos.org/a00110.html
+ *----------------------------------------------------------*/
+
+/* USER CODE BEGIN Includes */
+/* Section where include file can be added */
+/* USER CODE END Includes */
+
+/* Ensure definitions are only used by the compiler, and not by the assembler. */
+#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
+  #include <stdint.h>
+  extern uint32_t SystemCoreClock;
+#endif
+#define configUSE_PREEMPTION                     1
+#define configSUPPORT_STATIC_ALLOCATION          1
+#define configSUPPORT_DYNAMIC_ALLOCATION         1
+#define configUSE_IDLE_HOOK                      0
+#define configUSE_TICK_HOOK                      0
+#define configCPU_CLOCK_HZ                       ( SystemCoreClock )
+#define configTICK_RATE_HZ                       ((TickType_t)1000)
+#define configMAX_PRIORITIES                     ( 56 )
+#define configMINIMAL_STACK_SIZE                 ((uint16_t)128)
+#define configTOTAL_HEAP_SIZE                    ((size_t)3072)
+#define configMAX_TASK_NAME_LEN                  ( 16 )
+#define configUSE_TRACE_FACILITY                 1
+#define configUSE_16_BIT_TICKS                   0
+#define configUSE_MUTEXES                        1
+#define configQUEUE_REGISTRY_SIZE                8
+#define configUSE_RECURSIVE_MUTEXES              1
+#define configUSE_COUNTING_SEMAPHORES            1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION  0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                    0
+#define configMAX_CO_ROUTINE_PRIORITIES          ( 2 )
+
+/* Software timer definitions. */
+#define configUSE_TIMERS                         1
+#define configTIMER_TASK_PRIORITY                ( 2 )
+#define configTIMER_QUEUE_LENGTH                 10
+#define configTIMER_TASK_STACK_DEPTH             256
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+#define INCLUDE_vTaskPrioritySet            1
+#define INCLUDE_uxTaskPriorityGet           1
+#define INCLUDE_vTaskDelete                 1
+#define INCLUDE_vTaskCleanUpResources       0
+#define INCLUDE_vTaskSuspend                1
+#define INCLUDE_vTaskDelayUntil             1
+#define INCLUDE_vTaskDelay                  1
+#define INCLUDE_xTaskGetSchedulerState      1
+#define INCLUDE_xTimerPendFunctionCall      1
+#define INCLUDE_xQueueGetMutexHolder        1
+#define INCLUDE_uxTaskGetStackHighWaterMark 1
+#define INCLUDE_eTaskGetState               1
+
+/*
+ * The CMSIS-RTOS V2 FreeRTOS wrapper is dependent on the heap implementation used
+ * by the application thus the correct define need to be enabled below
+ */
+#define USE_FreeRTOS_HEAP_4
+
+/* Cortex-M specific definitions. */
+#ifdef __NVIC_PRIO_BITS
+ /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
+ #define configPRIO_BITS         __NVIC_PRIO_BITS
+#else
+ #define configPRIO_BITS         4
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority"
+function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY   15
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* Normal assert() semantics without relying on the provision of an assert.h
+header file. */
+/* USER CODE BEGIN 1 */
+#define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); for( ;; );}
+/* USER CODE END 1 */
+
+/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
+standard names. */
+#define vPortSVCHandler    SVC_Handler
+#define xPortPendSVHandler PendSV_Handler
+
+/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick,
+              to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
+
+#define xPortSysTickHandler SysTick_Handler
+
+/* USER CODE BEGIN Defines */
+/* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */
+/* USER CODE END Defines */
+
+#endif /* FREERTOS_CONFIG_H */

Core/Inc/gpio.h

@@ -0,0 +1,49 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    gpio.h
+  * @brief   This file contains all the function prototypes for
+  *          the gpio.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __GPIO_H__
+#define __GPIO_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_GPIO_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ GPIO_H__ */
+

Core/Inc/main.h

@@ -0,0 +1,83 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define B1_Pin GPIO_PIN_13
+#define B1_GPIO_Port GPIOC
+#define USART_TX_Pin GPIO_PIN_2
+#define USART_TX_GPIO_Port GPIOA
+#define USART_RX_Pin GPIO_PIN_3
+#define USART_RX_GPIO_Port GPIOA
+#define LD2_Pin GPIO_PIN_13
+#define LD2_GPIO_Port GPIOB
+#define TMS_Pin GPIO_PIN_13
+#define TMS_GPIO_Port GPIOA
+#define TCK_Pin GPIO_PIN_14
+#define TCK_GPIO_Port GPIOA
+#define SWO_Pin GPIO_PIN_3
+#define SWO_GPIO_Port GPIOB
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */

Core/Inc/stm32f3xx_hal_conf.h

@@ -0,0 +1,359 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_hal_conf.h
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CONF_H
+#define __STM32F3xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+
+#define HAL_MODULE_ENABLED
+  /*#define HAL_ADC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+/*#define HAL_CAN_MODULE_ENABLED   */
+/*#define HAL_CEC_MODULE_ENABLED   */
+/*#define HAL_NAND_MODULE_ENABLED   */
+/*#define HAL_NOR_MODULE_ENABLED   */
+/*#define HAL_PCCARD_MODULE_ENABLED   */
+/*#define HAL_SRAM_MODULE_ENABLED   */
+/*#define HAL_HRTIM_MODULE_ENABLED   */
+/*#define HAL_OPAMP_MODULE_ENABLED   */
+/*#define HAL_SDADC_MODULE_ENABLED   */
+/*#define HAL_TSC_MODULE_ENABLED   */
+/*#define HAL_COMP_MODULE_ENABLED   */
+/*#define HAL_CRC_MODULE_ENABLED   */
+/*#define HAL_CRYP_MODULE_ENABLED   */
+/*#define HAL_DAC_MODULE_ENABLED   */
+/*#define HAL_I2S_MODULE_ENABLED   */
+/*#define HAL_IWDG_MODULE_ENABLED   */
+/*#define HAL_LCD_MODULE_ENABLED   */
+/*#define HAL_LPTIM_MODULE_ENABLED   */
+/*#define HAL_RNG_MODULE_ENABLED   */
+/*#define HAL_RTC_MODULE_ENABLED   */
+/*#define HAL_SPI_MODULE_ENABLED   */
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_IRDA_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+/*#define HAL_SMBUS_MODULE_ENABLED   */
+/*#define HAL_WWDG_MODULE_ENABLED   */
+/*#define HAL_PCD_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+  * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+  *        Timeout value
+  */
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+  *        Timeout value
+  */
+#if !defined  (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT   ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE  ((uint32_t)40000)
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Time out for LSE start up value in ms.
+  */
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  *        - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal)
+  *        - External clock not generated on EVAL 373
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+
+#define  VDD_VALUE                   ((uint32_t)3300) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)15)    /*!< tick interrupt priority (lowest by default)  */
+#define  USE_RTOS                     0
+#define  PREFETCH_ENABLE              1
+#define  INSTRUCTION_CACHE_ENABLE     0
+#define  DATA_CACHE_ENABLE            0
+#define USE_SPI_CRC                     0U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_HRTIM_REGISTER_CALLBACKS       0U /* HRTIM register callback disabled     */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+#define  USE_HAL_OPAMP_REGISTER_CALLBACKS       0U /* OPAMP register callback disabled     */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f3xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f3xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f3xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f3xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f3xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "stm32f3xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f3xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f3xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f3xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f3xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f3xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f3xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f3xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f3xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f3xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f3xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SDADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_sdadc.h"
+#endif /* HAL_SDADC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f3xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f3xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f3xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f3xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f3xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f3xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CONF_H */

Core/Inc/stm32f3xx_it.h

@@ -0,0 +1,64 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_IT_H
+#define __STM32F3xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void DebugMon_Handler(void);
+void TIM1_UP_TIM16_IRQHandler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_IT_H */

Core/Inc/usart.h

@@ -0,0 +1,52 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    usart.h
+  * @brief   This file contains all the function prototypes for
+  *          the usart.c file
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USART_H__
+#define __USART_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern UART_HandleTypeDef huart2;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_USART2_UART_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USART_H__ */
+

Core/Src/freertos.c

@@ -0,0 +1,130 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * File Name          : freertos.c
+  * Description        : Code for freertos applications
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "FreeRTOS.h"
+#include "task.h"
+#include "main.h"
+#include "cmsis_os.h"
+#include "stm32f3xx_hal_gpio.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN Variables */
+
+/* USER CODE END Variables */
+/* Definitions for defaultTask */
+osThreadId_t defaultTaskHandle;
+const osThreadAttr_t defaultTask_attributes = {
+  .name = "defaultTask",
+  .stack_size = 128 * 4,
+  .priority = (osPriority_t) osPriorityNormal,
+};
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN FunctionPrototypes */
+
+/* USER CODE END FunctionPrototypes */
+
+void StartDefaultTask(void *argument);
+
+void MX_FREERTOS_Init(void); /* (MISRA C 2004 rule 8.1) */
+
+/**
+  * @brief  FreeRTOS initialization
+  * @param  None
+  * @retval None
+  */
+void MX_FREERTOS_Init(void) {
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* USER CODE BEGIN RTOS_MUTEX */
+  /* add mutexes, ... */
+  /* USER CODE END RTOS_MUTEX */
+
+  /* USER CODE BEGIN RTOS_SEMAPHORES */
+  /* add semaphores, ... */
+  /* USER CODE END RTOS_SEMAPHORES */
+
+  /* USER CODE BEGIN RTOS_TIMERS */
+  /* start timers, add new ones, ... */
+  /* USER CODE END RTOS_TIMERS */
+
+  /* USER CODE BEGIN RTOS_QUEUES */
+  /* add queues, ... */
+  /* USER CODE END RTOS_QUEUES */
+
+  /* Create the thread(s) */
+  /* creation of defaultTask */
+  defaultTaskHandle = osThreadNew(StartDefaultTask, NULL, &defaultTask_attributes);
+
+  /* USER CODE BEGIN RTOS_THREADS */
+  /* add threads, ... */
+  /* USER CODE END RTOS_THREADS */
+
+  /* USER CODE BEGIN RTOS_EVENTS */
+  /* add events, ... */
+  /* USER CODE END RTOS_EVENTS */
+
+}
+
+/* USER CODE BEGIN Header_StartDefaultTask */
+/**
+  * @brief  Function implementing the defaultTask thread.
+  * @param  argument: Not used
+  * @retval None
+  */
+/* USER CODE END Header_StartDefaultTask */
+void StartDefaultTask(void *argument)
+{
+  /* USER CODE BEGIN StartDefaultTask */
+  /* Infinite loop */
+  for(;;) {
+    HAL_GPIO_TogglePin(LD2_GPIO_Port, LD2_Pin);
+    osDelay(200);
+  }
+  /* USER CODE END StartDefaultTask */
+}
+
+/* Private application code --------------------------------------------------*/
+/* USER CODE BEGIN Application */
+
+/* USER CODE END Application */
+

Core/Src/gpio.c

@@ -0,0 +1,73 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    gpio.c
+  * @brief   This file provides code for the configuration
+  *          of all used GPIO pins.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "gpio.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/*----------------------------------------------------------------------------*/
+/* Configure GPIO                                                             */
+/*----------------------------------------------------------------------------*/
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/** Configure pins as
+        * Analog
+        * Input
+        * Output
+        * EVENT_OUT
+        * EXTI
+*/
+void MX_GPIO_Init(void)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOF_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(LD2_GPIO_Port, LD2_Pin, GPIO_PIN_RESET);
+
+  /*Configure GPIO pin : PtPin */
+  GPIO_InitStruct.Pin = B1_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PtPin */
+  GPIO_InitStruct.Pin = LD2_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct);
+
+}
+
+/* USER CODE BEGIN 2 */
+
+/* USER CODE END 2 */

Core/Src/main.c

@@ -0,0 +1,207 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "cmsis_os.h"
+#include "usart.h"
+#include "gpio.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+void MX_FREERTOS_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_USART2_UART_Init();
+  /* USER CODE BEGIN 2 */
+
+  /* USER CODE END 2 */
+
+  /* Init scheduler */
+  osKernelInitialize();  /* Call init function for freertos objects (in freertos.c) */
+  MX_FREERTOS_Init();
+
+  /* Start scheduler */
+  osKernelStart();
+  /* We should never get here as control is now taken by the scheduler */
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  Period elapsed callback in non blocking mode
+  * @note   This function is called  when TIM1 interrupt took place, inside
+  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
+  * a global variable "uwTick" used as application time base.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* USER CODE BEGIN Callback 0 */
+
+  /* USER CODE END Callback 0 */
+  if (htim->Instance == TIM1) {
+    HAL_IncTick();
+  }
+  /* USER CODE BEGIN Callback 1 */
+
+  /* USER CODE END Callback 1 */
+}
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+  __disable_irq();
+  while (1)
+  {
+  }
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

Core/Src/stm32f3xx_hal_msp.c

@@ -0,0 +1,83 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file         stm32f3xx_hal_msp.c
+  * @brief        This file provides code for the MSP Initialization
+  *               and de-Initialization codes.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* System interrupt init*/
+  /* PendSV_IRQn interrupt configuration */
+  HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */

Core/Src/stm32f3xx_hal_timebase_tim.c

@@ -0,0 +1,128 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_hal_timebase_TIM.c
+  * @brief   HAL time base based on the hardware TIM.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal.h"
+#include "stm32f3xx_hal_tim.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+TIM_HandleTypeDef        htim1;
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @brief  This function configures the TIM1 as a time base source.
+  *         The time source is configured  to have 1ms time base with a dedicated
+  *         Tick interrupt priority.
+  * @note   This function is called  automatically at the beginning of program after
+  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
+  * @param  TickPriority: Tick interrupt priority.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  RCC_ClkInitTypeDef    clkconfig;
+  uint32_t              uwTimclock = 0U;
+
+  uint32_t              uwPrescalerValue = 0U;
+  uint32_t              pFLatency;
+  HAL_StatusTypeDef     status;
+
+  /* Enable TIM1 clock */
+  __HAL_RCC_TIM1_CLK_ENABLE();
+
+  /* Get clock configuration */
+  HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
+
+  /* Compute TIM1 clock */
+      uwTimclock = HAL_RCC_GetPCLK2Freq();
+
+  /* Compute the prescaler value to have TIM1 counter clock equal to 1MHz */
+  uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
+
+  /* Initialize TIM1 */
+  htim1.Instance = TIM1;
+
+  /* Initialize TIMx peripheral as follow:
+
+  + Period = [(TIM1CLK/1000) - 1]. to have a (1/1000) s time base.
+  + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
+  + ClockDivision = 0
+  + Counter direction = Up
+  */
+  htim1.Init.Period = (1000000U / 1000U) - 1U;
+  htim1.Init.Prescaler = uwPrescalerValue;
+  htim1.Init.ClockDivision = 0;
+  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+
+  status = HAL_TIM_Base_Init(&htim1);
+  if (status == HAL_OK)
+  {
+    /* Start the TIM time Base generation in interrupt mode */
+    status = HAL_TIM_Base_Start_IT(&htim1);
+    if (status == HAL_OK)
+    {
+    /* Enable the TIM1 global Interrupt */
+        HAL_NVIC_EnableIRQ(TIM1_UP_TIM16_IRQn);
+      /* Configure the SysTick IRQ priority */
+      if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+      {
+        /* Configure the TIM IRQ priority */
+        HAL_NVIC_SetPriority(TIM1_UP_TIM16_IRQn, TickPriority, 0U);
+        uwTickPrio = TickPriority;
+      }
+      else
+      {
+        status = HAL_ERROR;
+      }
+    }
+  }
+
+ /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  Suspend Tick increment.
+  * @note   Disable the tick increment by disabling TIM1 update interrupt.
+  * @param  None
+  * @retval None
+  */
+void HAL_SuspendTick(void)
+{
+  /* Disable TIM1 update Interrupt */
+  __HAL_TIM_DISABLE_IT(&htim1, TIM_IT_UPDATE);
+}
+
+/**
+  * @brief  Resume Tick increment.
+  * @note   Enable the tick increment by Enabling TIM1 update interrupt.
+  * @param  None
+  * @retval None
+  */
+void HAL_ResumeTick(void)
+{
+  /* Enable TIM1 Update interrupt */
+  __HAL_TIM_ENABLE_IT(&htim1, TIM_IT_UPDATE);
+}
+

Core/Src/stm32f3xx_it.c

@@ -0,0 +1,178 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f3xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern TIM_HandleTypeDef htim1;
+
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M4 Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+  while (1)
+  {
+  }
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Pre-fetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F3xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f3xx.s).                    */
+/******************************************************************************/
+
+/**
+  * @brief This function handles TIM1 update and TIM16 interrupts.
+  */
+void TIM1_UP_TIM16_IRQHandler(void)
+{
+  /* USER CODE BEGIN TIM1_UP_TIM16_IRQn 0 */
+
+  /* USER CODE END TIM1_UP_TIM16_IRQn 0 */
+  HAL_TIM_IRQHandler(&htim1);
+  /* USER CODE BEGIN TIM1_UP_TIM16_IRQn 1 */
+
+  /* USER CODE END TIM1_UP_TIM16_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */