README: rename targets
This commit is contained in:
carbon
44
README-ja.md
44
README-ja.md
@ -23,7 +23,7 @@ Milk-V DuoはCV1800Bをベースにした超小型の組み込みプラットフ
|
||||
├── isp_tuning // カメラ効果パラメータ
|
||||
├── linux_5.10 // Linuxカーネル
|
||||
├── middleware // 自家製マルチメディアフレームワーク
|
||||
├── milkv // Milk-Vのコンフィグレーションファイル
|
||||
├── device // Milk-Vのコンフィグレーションファイル
|
||||
├── opensbi // opensbiライブラリ
|
||||
├── out // 完成したSDカード用イメージはここに出てきます
|
||||
├── ramdisk // 完成済みramsidk
|
||||
@ -72,11 +72,11 @@ Usage:
|
||||
./build.sh lunch - Select a board to build
|
||||
./build.sh [board] - Build [board] directly, supported boards asfollows:
|
||||
milkv-duo
|
||||
milkv-duo-python
|
||||
milkv-duo-lite
|
||||
milkv-duo256m
|
||||
milkv-duo256m-python
|
||||
milkv-duo256m-lite
|
||||
```
|
||||
Listed at the bottom is the list of currently supported target versions. Those with the `python` suffix include the python, pip, and pinpong libraries.
|
||||
Listed at the bottom is the list of currently supported target versions. Those with the `lite` suffix is a simplified version and does not include libraries and application packages such as python, pip, pinpong, etc.
|
||||
|
||||
As shown in the prompt, there are two ways to compile the target version.
|
||||
|
||||
@ -85,18 +85,18 @@ The first method is to execute `./build.sh lunch` to bring up the interactive me
|
||||
# ./build.sh lunch
|
||||
Select a target to build:
|
||||
1. milkv-duo
|
||||
2. milkv-duo-python
|
||||
2. milkv-duo-lite
|
||||
3. milkv-duo256m
|
||||
4. milkv-duo256m-python
|
||||
4. milkv-duo256m-lite
|
||||
Which would you like:
|
||||
```
|
||||
|
||||
The second method is to put the name of the target version after the script and compile it directly. For example, if you need to compile a Duo image with python and pinpong libraries, the command is as follows:
|
||||
The second method is to put the name of the target version after the script and compile it directly. For example, if you need to compile the image of `milkv-duo`, the command is as follows:
|
||||
```bash
|
||||
# ./build.sh milkv-duo-python
|
||||
# ./build.sh milkv-duo
|
||||
```
|
||||
|
||||
正常にコンパイルされるとSDカード用イメージ`milkv-duo-python-*-*.img`が`out`ディレクトリの中に出てきます。
|
||||
正常にコンパイルされるとSDカード用イメージ`milkv-duo-*-*.img`が`out`ディレクトリの中に出てきます。
|
||||
|
||||
*注意：最初のコンパイル時に必要なツールチェーン(およそ840MB)が自動でダウンロードされます。一度ダウンロードされると`host-tools`内に自動で展開されます。以後のコンパイルでは`host-tools`ディレクトリがある場合再びダウンロードはされません。*
|
||||
|
||||
@ -111,9 +111,9 @@ tar -xf host-tools.tar.gz -C /your/sdk/path/
|
||||
Then enter the following commands in sequence to complete the step-by-step compilation. Replace `[board]` and `[config]` in the command with the version that needs to be compiled. The currently supported `board` and corresponding `config` are as follows:
|
||||
```
|
||||
milkv-duo cv1800b_milkv_duo_sd
|
||||
milkv-duo-python cv1800b_milkv_duo_sd
|
||||
milkv-duo-lite cv1800b_milkv_duo_sd
|
||||
milkv-duo256m cv1812cp_milkv_duo256m_sd
|
||||
milkv-duo256m-python cv1812cp_milkv_duo256m_sd
|
||||
milkv-duo256m-lite cv1812cp_milkv_duo256m_sd
|
||||
```
|
||||
|
||||
```bash
|
||||
@ -126,9 +126,9 @@ build_all
|
||||
pack_sd_image
|
||||
```
|
||||
|
||||
For example, if you need to compile a Duo image with python and pinpong libraries, the step-by-step compilation command is as follows:
|
||||
For example, if you need to compile the image of `milkv-duo`, the step-by-step compilation command is as follows:
|
||||
```bash
|
||||
source device/milkv-duo-python/boardconfig.sh
|
||||
source device/milkv-duo/boardconfig.sh
|
||||
|
||||
source build/milkvsetup.sh
|
||||
defconfig cv1800b_milkv_duo_sd
|
||||
@ -189,11 +189,11 @@ docker exec -it duodocker /bin/bash -c "cd /home/work && cat /etc/issue && ./bui
|
||||
Note that the `./build.sh [board]` at the end of the command is the same as the previous usage in the one-click compilation instructions in Ubuntu 22.04. Use `./build.sh` can see how to use the command, use `./ build.sh lunch` can bring up the interactive selection menu, use `./build.sh [board]` to directly compile the target version, `[board]` can be replaced with:
|
||||
```
|
||||
milkv-duo
|
||||
milkv-duo-python
|
||||
milkv-duo-lite
|
||||
milkv-duo256m
|
||||
milkv-duo256m-python
|
||||
milkv-duo256m-lite
|
||||
```
|
||||
*Versions with `python` suffix include python, pip, pinpong libraries*
|
||||
*Versions with the `lite` suffix is a simplified version and does not include libraries and application packages such as python, pip, pinpong, etc.*
|
||||
|
||||
コマンド中のパラメータについて:
|
||||
- `duodocker` 実行中のDockerの名前です。先程設定したものと同じである必要があります。
|
||||
@ -202,9 +202,9 @@ milkv-duo256m-python
|
||||
- `cat /etc/issue` Dockerで実行されているイメージのバージョンを表示します。これはいまのところ「Ubuntu 22.04.3 LTS」で、デバッグに使われます。
|
||||
- `./build.sh [board]` 自動コンパイルスクリプトを実行します。
|
||||
|
||||
For example, if you need to compile a Duo image with python and pinpong libraries, the command is as follows:
|
||||
For example, if you need to compile the image of `milkv-duo`, the command is as follows:
|
||||
```bash
|
||||
docker exec -it duodocker /bin/bash -c "cd /home/work && cat /etc/issue && ./build.sh milkv-duo-python"
|
||||
docker exec -it duodocker /bin/bash -c "cd /home/work && cat /etc/issue && ./build.sh milkv-duo"
|
||||
```
|
||||
|
||||
コンパイルが成功すると、`out`ディレクトリの中に`milkv-duo-*-*.img`が出てきます。
|
||||
@ -232,9 +232,9 @@ root@8edea33c2239:/# cd /home/work/
|
||||
Then enter the following commands in sequence to complete the step-by-step compilation. Replace `[board]` and `[config]` in the command with the version that needs to be compiled. The currently supported `board` and corresponding `config` are as follows:
|
||||
```
|
||||
milkv-duo cv1800b_milkv_duo_sd
|
||||
milkv-duo-python cv1800b_milkv_duo_sd
|
||||
milkv-duo-lite cv1800b_milkv_duo_sd
|
||||
milkv-duo256m cv1812cp_milkv_duo256m_sd
|
||||
milkv-duo256m-python cv1812cp_milkv_duo256m_sd
|
||||
milkv-duo256m-lite cv1812cp_milkv_duo256m_sd
|
||||
```
|
||||
|
||||
```bash
|
||||
@ -247,9 +247,9 @@ build_all
|
||||
pack_sd_image
|
||||
```
|
||||
|
||||
For example, if you need to compile a Duo image with python and pinpong libraries, the step-by-step compilation command is as follows:
|
||||
For example, if you need to compile the image of `milkv-duo`, the step-by-step compilation command is as follows:
|
||||
```bash
|
||||
source device/milkv-duo-python/boardconfig.sh
|
||||
source device/milkv-duo/boardconfig.sh
|
||||
|
||||
source build/milkvsetup.sh
|
||||
defconfig cv1800b_milkv_duo_sd
|
||||
|
||||
Reference in New Issue
Block a user