gaoyang3513/MilkV-Duo
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
b7e531da4e196e358a655fef9e9e7191faae5ae2
MilkV-Duo/u-boot-2021.10/include/configs/cv181x-asic.h
forum_service b7e531da4e uboot: version release v4.1.5 
[feat] add cvi_update_rtos tool
[feat](uboot):Support uart download

Change-Id: I4027f9ceba4205d2d5c7c5135b888172ac49203a
2023-12-22 09:56:07 +08:00

337 lines
9.9 KiB
C
Raw Blame History

/*
* Configuration for Versatile Express. Parts were derived from other ARM
* configurations.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CV181X_ASIC_H__
#define __CV181X_ASIC_H__
#include <../../../board/cvitek/cv181x/cv181x_reg.h>
/* defined in cvipart.h */
#undef CONFIG_ENV_OFFSET
#undef CONFIG_ENV_OFFSET_REDUND
#undef CONFIG_ENV_SIZE
#undef CONFIG_ENV_IS_IN_SPI_FLASH
#undef CONFIG_ENV_IS_IN_MMC
#undef CONFIG_ENV_IS_IN_NAND
#undef CONFIG_ENV_SECT_SIZE
/* cvi_board_memmap.h is generated from build/boards/{CHIP_ARCH}/{BOARD}/memmap.py */
#include "cvi_board_memmap.h"
/* partition definitions header which is created by mkcvipart.py */
/* please do not modify header manually */
#include "cvipart.h"
#include "cvi_panels/cvi_panel_diffs.h"
// defined in this .h
#undef CONFIG_BOOTCOMMAND
#if defined(__aarch64__)
#define CONFIG_ARMV8_SWITCH_TO_EL1
#endif
#define CONFIG_REMAKE_ELF
/* Physical Memory Map */
#define CONFIG_SYS_RESVIONSZ CVIMMAP_ION_SIZE
#define CONFIG_SYS_RESVLOGOSZ CVIMMAP_BOOTLOGO_SIZE
#define CONFIG_SYS_BOOTMAPSZ CVIMMAP_KERNEL_MEMORY_SIZE
#define PHYS_SDRAM_1 CVIMMAP_KERNEL_MEMORY_ADDR
#define PHYS_SDRAM_1_SIZE CVIMMAP_KERNEL_MEMORY_SIZE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR CVIMMAP_CONFIG_SYS_INIT_SP_ADDR
/* default address for bootm command without arguments */
#define CONFIG_SYS_LOAD_ADDR 0x80080000
#define CONFIG_SYS_BOOTM_LEN (64 << 20)
/* Generic Interrupt Controller Definitions */
#define GICD_BASE (0x01F01000)
#define GICC_BASE (0x01F02000)
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (9 << 20))
#if defined(__aarch64__)
#define CONFIG_SYS_NONCACHED_MEMORY BIT(20) /* 1 MiB */
#endif
#if defined(__riscv)
#define CONFIG_SYS_CACHELINE_SIZE 64
#endif
// Frequency of ARM arch timer and RISC-V rdtime
#define SYS_COUNTER_FREQ_IN_SECOND 25000000
/* 16550 Serial Configuration */
#define CONFIG_SYS_NS16550_COM1 0x04140000
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SYS_NS16550_CLK 25000000
/* include/generated/autoconf.h would define CONFIG_BAUDRATE from drivers/serial/Kconfig (default 115200) */
/*#define CONFIG_MENU_SHOW*/
/* Download related definitions */
#define UPGRADE_SRAM_ADDR 0x0e000030
#define UBOOT_PID_SRAM_ADDR 0x0e000030
#define UPDATE_ADDR CVIMMAP_ION_ADDR
#define HEADER_ADDR UPDATE_ADDR
#define USB_UPDATE_MAGIC MAGIC_NUM_USB_DL
/*----------------------------------------------------------------------
* SPI Flash Configuration
* ---------------------------------------------------------------------
*/
#ifdef CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_CVSFC
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_FLASH_CFI_MTD
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SPI_FLASH_MTD
#endif /* CONFIG_SPI_FLASH */
/*-----------------------------------------------------------------------
* SPI NAND Flash Configuration
*----------------------------------------------------------------------
*/
#ifdef CONFIG_NAND_SUPPORT
/*#define CONFIG_ENV_IS_IN_NAND*/ /* env in nand flash */
#define CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_NAND_FLASH_CVSNFC
#define CONFIG_SYS_MAX_NAND_CHIPS 1
/*#define CONFIG_SYS_NAND_SELF_INIT*/
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
/* For CMD_UBI && CMD_UBIFS */
#define CONFIG_RBTREE
#define CONFIG_LZO
//#define CONFIG_CMD_UBI
//#define CONFIG_CMD_UBIFS
#define CONFIG_MTD_UBI_WL_THRESHOLD 4096
#define CONFIG_MTD_UBI_BEB_LIMIT 20
#define NANDBOOT_V2
#endif /* CONFIG_NAND_SUPPORT */
#ifdef CONFIG_NAND_FLASH_CVSNFC
#define SPI_NAND_TX_DATA_BASE 0x4060060
#define SPI_NAND_RX_DATA_BASE 0x4060064
#define SPI_NAND_REG_BASE 0x4060000
#define CONFIG_SYS_NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE SPI_NAND_REG_BASE
#define CONFIG_CVSNFC_MAX_CHIP CONFIG_SYS_MAX_NAND_DEVICE
#define CONFIG_CVSNFC_REG_BASE_ADDRESS SPI_NAND_REG_BASE
#define CONFIG_CVSNFC_BUFFER_BASE_ADDRESS SPI_NAND_MEM_BASE
#define CONFIG_CVSNFC_HARDWARE_PAGESIZE_ECC
#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE}
#endif /* CONFIG_NAND_SUPPORT */
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MAXARGS 64 /* max command args */
#ifndef CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_SECT_SIZE 0x00040000
#endif
#define CONFIG_ENV_OVERWRITE
#define CONFIG_MMC_UHS_SUPPORT
#define CONFIG_MMC_HS200_SUPPORT
#define CONFIG_MMC_SUPPORTS_TUNING
/* #define CONFIG_USB_DWC2 */
/* #define CONFIG_USB_DWC2_REG_ADDR 0x04340000 */
/* Enable below CONFIG for fastboot */
/* To use usb fastboot, you need to enable below Kconfig
* CONFIG_USB, CONFIG_USB_GADGET and CONFIG_USB_GADGET_DWC2_OTG
*/
#ifdef CONFIG_USB_GADGET
#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_G_DNL_MANUFACTURER "Cvitek"
#define CONFIG_G_DNL_VENDOR_NUM 0x18d1
#define CONFIG_G_DNL_PRODUCT_NUM 0x4ee0
#endif
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_GATEWAYIP 192.168.0.11
#define CONFIG_SERVERIP 192.168.56.101
#ifdef CONFIG_USE_DEFAULT_ENV
/* The following Settings are chip dependent */
/******************************************************************************/
#define UIMAG_ADDR CVIMMAP_UIMAG_ADDR
#ifdef CONFIG_BOOTLOGO
#define LOGO_RESERVED_ADDR __stringify(CVIMMAP_BOOTLOGO_ADDR)//yuv load addr
#define LOGO_READ_ADDR "0x84080000" //jpeg load addr
#define VO_ALIGNMENT "16"
#define LOGOSIZE "0x80000" //jpeg max size
#endif
/******************************************************************************/
/* define common env */
/*******************************************************************************/
/* Config FDT_NO */
#ifndef USE_HOSTCC
#define FDT_NO __stringify(CVICHIP) "_" __stringify(CVIBOARD)
#else
#define FDT_NO ""
#endif
/* config root */
#ifdef CONFIG_NAND_SUPPORT
#ifdef CONFIG_SKIP_RAMDISK
#define ROOTARGS "ubi.mtd=ROOTFS ubi.block=0,0 root=/dev/ubiblock0_0 rootfstype=squashfs"
#else
#define ROOTARGS "ubi.mtd=ROOTFS ubi.block=0,0"
#endif /* CONFIG_SKIP_RAMDISK */
#else
#define ROOTARGS "rootfstype=squashfs rootwait ro root=" ROOTFS_DEV
#endif
/* BOOTARGS */
#define PARTS PART_LAYOUT
/* config uart */
#define CONSOLEDEV "ttyS0\0"
/* config loglevel */
#ifdef RELEASE
#define CONSOLE_LOGLEVEL " loglevel=0"
#define EARLYCON_RELEASE " release "
#else
#define CONSOLE_LOGLEVEL " loglevel=9"
#define EARLYCON_RELEASE " "
#endif
#define OTHERBOOTARGS "earlycon=sbi riscv.fwsz=" __stringify(CVIMMAP_OPENSBI_SIZE) " " \
EARLYCON_RELEASE CONSOLE_LOGLEVEL
/* config mtdids */
#ifdef CONFIG_NAND_SUPPORT
#define MTDIDS_DEFAULT "nand0=cvsnfc"
#elif CONFIG_SPI_FLASH
#define MTDIDS_DEFAULT "nor1=flash-0"
#else
#define MTDIDS_DEFAULT ""
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=" CONSOLEDEV \
"baudrate=115200\0" \
"uImage_addr=" __stringify(UIMAG_ADDR) "\0" \
"update_addr=" __stringify(UPDATE_ADDR) "\0" \
"mtdparts=" PARTS "\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
"root=" ROOTARGS "\0" \
"sdboot=" SD_BOOTM_COMMAND "\0" \
"othbootargs=" OTHERBOOTARGS "\0" \
PARTS_OFFSET
/********************************************************************************/
/* UBOOT_VBOOT commands */
#ifdef UBOOT_VBOOT
#define UBOOT_VBOOT_BOOTM_COMMAND \
"aes_itb dec_fdt_key 0 ${uImage_addr} ${uImage_addr}; " \
"if test $? -ne 0; then " \
" echo ITB decryption failed; " \
"else; " \
" bootm ${uImage_addr}#config-" FDT_NO ";" \
"fi;"
#else
#define UBOOT_VBOOT_BOOTM_COMMAND "bootm ${uImage_addr}#config-" FDT_NO ";"
#endif
/* BOOTLOGO */
#ifdef CONFIG_BOOTLOGO
#define SHOWLOGOCMD "run showlogo;"
#ifdef CONFIG_NAND_SUPPORT
#define LOAD_LOGO "nand read " LOGO_READ_ADDR " MISC;"
#elif defined(CONFIG_SPI_FLASH)
#define LOAD_LOGO "sf probe;sf read " LOGO_READ_ADDR " ${MISC_PART_OFFSET} ${MISC_PART_SIZE};"
#else
#define LOAD_LOGO "mmc dev 0;mmc read " LOGO_READ_ADDR " ${MISC_PART_OFFSET} ${MISC_PART_SIZE};"
#endif
#define SHOWLOGOCOMMAND LOAD_LOGO CVI_JPEG START_VO START_VL SET_VO_BG
#else
#define SHOWLOGOCMD
#endif
#define SET_BOOTARGS "setenv bootargs ${reserved_mem} ${root} ${mtdparts} " \
"console=$consoledev,$baudrate $othbootargs;"
#define SD_BOOTM_COMMAND \
SET_BOOTARGS \
"echo Boot from SD with ramboot.itb;" \
"mmc dev 1 && fatload mmc 1 ${uImage_addr} ramboot.itb; " \
"if test $? -eq 0; then " \
UBOOT_VBOOT_BOOTM_COMMAND \
"fi;"
#ifdef CONFIG_ENABLE_ALIOS_UPDATE
#define CONFIG_BOOTCOMMAND "cvi_update_rtos"
#else
#define CONFIG_BOOTCOMMAND SHOWLOGOCMD "cvi_update || run norboot || run nandboot ||run emmcboot"
#endif
#if defined(CONFIG_NAND_SUPPORT)
/* For spi nand boot, need to reset DMA and its setting before exiting uboot */
/* 0x4330058 : DMA reset */
/* 0x3000154 : restore DMA remap to 0 */
#define CONFIG_NANDBOOTCOMMAND \
SET_BOOTARGS \
"nand read ${uImage_addr} BOOT;" \
"mw.l 4330058 1 1; md.l 4330058 1; mw.l 3000154 0 1;" \
UBOOT_VBOOT_BOOTM_COMMAND
#elif defined(CONFIG_SPI_FLASH)
#define CONFIG_NORBOOTCOMMAND \
SET_BOOTARGS \
"sf probe;sf read ${uImage_addr} ${BOOT_PART_OFFSET} ${BOOT_PART_SIZE};" \
UBOOT_VBOOT_BOOTM_COMMAND
#elif defined(CONFIG_EMMC_SUPPORT)
#define CONFIG_EMMCBOOTCOMMAND \
SET_BOOTARGS \
"mmc dev 0 ;" \
"mmc read ${uImage_addr} ${BOOT_PART_OFFSET} ${BOOT_PART_SIZE} ;" \
UBOOT_VBOOT_BOOTM_COMMAND
#endif
#else
/* define your environment */
#define CONFIG_BOOTCOMMAND ""
#endif /* CONFIG_USE_DEFAULT_ENV */
#define CVI_SPL_BOOTAGRS \
PARTS " " \
ROOTARGS " " \
"console=ttyS0,115200 " \
OTHERBOOTARGS "\0"
#endif /* __CV181X_ASIC_H__ */
Reference in New Issue View Git Blame Copy Permalink