add board sg2002_milkv_duo256m_glibc_arm64_sd
Signed-off-by: carbon <carbon@milkv.io>
This commit is contained in:
carbon
@ -0,0 +1,8 @@
|
||||
{
|
||||
"ddr_cfg_list": [
|
||||
"ddr3_1866_x16",
|
||||
"ddr3_2133_x16",
|
||||
"ddr_auto_x16"
|
||||
],
|
||||
"board_information": "CA53 + DDR 256MB"
|
||||
}
|
||||
@ -0,0 +1,14 @@
|
||||
/dts-v1/;
|
||||
#include "cv181x_base_arm.dtsi"
|
||||
#include "cv181x_asic_qfn.dtsi"
|
||||
#include "cv181x_asic_sd.dtsi"
|
||||
#include "cv181x_default_memmap.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Milk-V Duo256M";
|
||||
|
||||
sd:cv-sd@4310000 {
|
||||
max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -0,0 +1,285 @@
|
||||
CONFIG_KERNEL_XZ=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_FRAME_WARN=2048
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_LOG_BUF_SHIFT=15
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
# CONFIG_UID16 is not set
|
||||
# CONFIG_SYSFS_SYSCALL is not set
|
||||
# CONFIG_FHANDLE is not set
|
||||
# CONFIG_BASE_FULL is not set
|
||||
# CONFIG_AIO is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_SLUB_DEBUG is not set
|
||||
CONFIG_ARM_LPAE=y
|
||||
CONFIG_SWP_EMULATE=y
|
||||
# CONFIG_VDSO is not set
|
||||
CONFIG_HAVE_ARM_ARCH_TIMER=y
|
||||
CONFIG_ARM_PSCI=y
|
||||
CONFIG_THUMB2_KERNEL=y
|
||||
CONFIG_FORCE_MAX_ZONEORDER=10
|
||||
# CONFIG_ATAGS is not set
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
# CONFIG_SUSPEND is not set
|
||||
CONFIG_ARCH_CVITEK=y
|
||||
CONFIG_ARCH_CV181X=y
|
||||
CONFIG_ARCH_CVITEK_CHIP="cv181x"
|
||||
CONFIG_ARCH_CV181X_ASIC=y
|
||||
CONFIG_POWER_RESET=y
|
||||
# CONFIG_STACKPROTECTOR is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_FORCE_LOAD=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_LBDAF is not set
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
# CONFIG_MQ_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_MQ_IOSCHED_KYBER is not set
|
||||
# CONFIG_COREDUMP is not set
|
||||
CONFIG_CMA=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_CFG80211=m
|
||||
CONFIG_RFKILL=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_ALLOW_DEV_COREDUMP is not set
|
||||
CONFIG_DMA_CMA=n
|
||||
CONFIG_CMA_SIZE_MBYTES=0
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
# CONFIG_MTD_OF_PARTS is not set
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_NAND_PLATFORM=y
|
||||
CONFIG_MTD_NAND_CVSNFC=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_SPI_CVI_SPIF=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NET_CORE is not set
|
||||
# CONFIG_NET_VENDOR_ALACRITECH is not set
|
||||
# CONFIG_NET_VENDOR_AMAZON is not set
|
||||
# CONFIG_NET_VENDOR_AQUANTIA is not set
|
||||
# CONFIG_NET_VENDOR_ARC is not set
|
||||
# CONFIG_NET_VENDOR_AURORA is not set
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_CADENCE is not set
|
||||
# CONFIG_NET_VENDOR_CAVIUM is not set
|
||||
# CONFIG_NET_VENDOR_CIRRUS is not set
|
||||
# CONFIG_NET_VENDOR_CORTINA is not set
|
||||
# CONFIG_NET_VENDOR_EZCHIP is not set
|
||||
# CONFIG_NET_VENDOR_FARADAY is not set
|
||||
# CONFIG_NET_VENDOR_HISILICON is not set
|
||||
# CONFIG_NET_VENDOR_HUAWEI is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MELLANOX is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_MICROCHIP is not set
|
||||
# CONFIG_NET_VENDOR_MICROSEMI is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
# CONFIG_NET_VENDOR_NETRONOME is not set
|
||||
# CONFIG_NET_VENDOR_NI is not set
|
||||
# CONFIG_NET_VENDOR_QUALCOMM is not set
|
||||
# CONFIG_NET_VENDOR_RENESAS is not set
|
||||
# CONFIG_NET_VENDOR_ROCKER is not set
|
||||
# CONFIG_NET_VENDOR_SAMSUNG is not set
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SOLARFLARE is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
# CONFIG_NET_VENDOR_SOCIONEXT is not set
|
||||
CONFIG_STMMAC_ETH=y
|
||||
# CONFIG_DWMAC_GENERIC is not set
|
||||
# CONFIG_NET_VENDOR_SYNOPSYS is not set
|
||||
# CONFIG_NET_VENDOR_VIA is not set
|
||||
# CONFIG_NET_VENDOR_WIZNET is not set
|
||||
CONFIG_CVITEK_PHY=y
|
||||
# CONFIG_USB_NET_DRIVERS is not set
|
||||
# CONFIG_WLAN_VENDOR_ADMTEK is not set
|
||||
# CONFIG_WLAN_VENDOR_ATH is not set
|
||||
# CONFIG_WLAN_VENDOR_ATMEL is not set
|
||||
# CONFIG_WLAN_VENDOR_BROADCOM is not set
|
||||
# CONFIG_WLAN_VENDOR_CISCO is not set
|
||||
# CONFIG_WLAN_VENDOR_INTEL is not set
|
||||
# CONFIG_WLAN_VENDOR_INTERSIL is not set
|
||||
# CONFIG_WLAN_VENDOR_MARVELL is not set
|
||||
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
|
||||
# CONFIG_WLAN_VENDOR_RALINK is not set
|
||||
CONFIG_RTL8188FU=m
|
||||
# CONFIG_WLAN_VENDOR_RSI is not set
|
||||
# CONFIG_WLAN_VENDOR_ST is not set
|
||||
# CONFIG_WLAN_VENDOR_TI is not set
|
||||
# CONFIG_WLAN_VENDOR_ZYDAS is not set
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=5
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=5
|
||||
CONFIG_SERIAL_8250_DW=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_SMBUS=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_DESIGNWARE_PLATFORM=y
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_PTP_1588_CLOCK is not set
|
||||
CONFIG_CVITEK_PINCTRL_CV1835=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_GPIO_DWAPB=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_NETLINK=y
|
||||
CONFIG_THERMAL_WRITABLE_TRIPS=y
|
||||
CONFIG_THERMAL_EMULATION=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_MEDIA_SUPPORT=n
|
||||
CONFIG_VIDEO_CVITEK=m
|
||||
CONFIG_VIDEO_CVITEK_CIF=m
|
||||
CONFIG_VIDEO_CVITEK_SNS_I2C=m
|
||||
CONFIG_VIDEO_CVITEK_MIPI_TX=m
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_CVITEK=m
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SND=y
|
||||
# CONFIG_SND_SUPPORT_OLD_API is not set
|
||||
# CONFIG_SND_PROC_FS is not set
|
||||
# CONFIG_SND_DRIVERS is not set
|
||||
CONFIG_SND_HDA_PREALLOC_SIZE=n
|
||||
# CONFIG_SND_ARM is not set
|
||||
# CONFIG_SND_SPI is not set
|
||||
# CONFIG_SND_USB is not set
|
||||
CONFIG_SND_SOC=y
|
||||
CONFIG_SND_SOC_CV182XA_CV182XAADC=y
|
||||
CONFIG_SND_SOC_CV182XA_CV182XADAC=y
|
||||
CONFIG_SND_CV1835_I2S=y
|
||||
CONFIG_SND_SOC_CV182XAADC=y
|
||||
CONFIG_SND_SOC_CV182XADAC=y
|
||||
# CONFIG_SND_SOC_CV182X_CV182XPDM is not set
|
||||
# CONFIG_SND_SOC_CV1835PDM is not set
|
||||
# CONFIG_SND_SOC_CV1835_CONCURRENT_I2S is not set
|
||||
CONFIG_SND_SOC_CV1835_USE_AUDIO_PLL=y
|
||||
CONFIG_CV1835_I2S_SUBSYS=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_CVI=y
|
||||
CONFIG_DMADEVICES=n
|
||||
CONFIG_DW_DMAC_CVITEK=n
|
||||
# CONFIG_VIRTIO_MENU is not set
|
||||
CONFIG_STAGING=y
|
||||
CONFIG_ION=y
|
||||
CONFIG_ION_SYSTEM_HEAP=y
|
||||
CONFIG_ION_CARVEOUT_HEAP=y
|
||||
CONFIG_ION_CMA_HEAP=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_CV1835_SYSDMA_REMAP=n
|
||||
CONFIG_PWM=y
|
||||
CONFIG_ANDROID=y
|
||||
# CONFIG_TEE=y
|
||||
# CONFIG_OPTEE=y
|
||||
# CONFIG_MANDATORY_FILE_LOCKING is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
# CONFIG_PROC_PAGE_MONITOR is not set
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CONFIGFS_FS=m
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_WBUF_VERIFY=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_SQUASHFS=y
|
||||
CONFIG_SQUASHFS_FILE_DIRECT=y
|
||||
# CONFIG_SQUASHFS_ZLIB is not set
|
||||
CONFIG_SQUASHFS_XZ=y
|
||||
CONFIG_SQUASHFS_EMBEDDED=y
|
||||
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=1
|
||||
CONFIG_NETWORK_FILESYSTEMS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V2=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_ISO8859_2=y
|
||||
CONFIG_NLS_ISO8859_3=y
|
||||
# CONFIG_CRYPTO_ECHAINIV is not set
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
# CONFIG_XZ_DEC_X86 is not set
|
||||
# CONFIG_XZ_DEC_POWERPC is not set
|
||||
# CONFIG_XZ_DEC_IA64 is not set
|
||||
# CONFIG_XZ_DEC_ARMTHUMB is not set
|
||||
# CONFIG_XZ_DEC_SPARC is not set
|
||||
CONFIG_PRINTK_TIME=y
|
||||
# CONFIG_ENABLE_MUST_CHECK is not set
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_PREEMPT is not set
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_FTRACE is not set
|
||||
# CONFIG_RUNTIME_TESTING_MENU is not set
|
||||
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
|
||||
|
||||
CONFIG_RTC_CLASS=y
|
||||
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_OTG=y
|
||||
CONFIG_USB_OTG_FSM=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_LIBCOMPOSITE=y
|
||||
CONFIG_USB_F_ACM=y
|
||||
CONFIG_USB_U_SERIAL=y
|
||||
CONFIG_USB_U_ETHER=y
|
||||
CONFIG_USB_U_AUDIO=y
|
||||
CONFIG_USB_F_SERIAL=y
|
||||
CONFIG_USB_F_ECM=y
|
||||
CONFIG_USB_F_EEM=y
|
||||
CONFIG_USB_F_RNDIS=y
|
||||
CONFIG_USB_F_MASS_STORAGE=y
|
||||
CONFIG_USB_F_UAC1=y
|
||||
CONFIG_USB_F_UVC=y
|
||||
CONFIG_USB_UAS=y
|
||||
CONFIG_USB_DWC2=m
|
||||
CONFIG_USB_DWC2_DUAL_ROLE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_U_SERIAL_CONSOLE=y
|
||||
CONFIG_USB_CONFIGFS=y
|
||||
CONFIG_USB_CONFIGFS_SERIAL=y
|
||||
CONFIG_USB_CONFIGFS_ACM=y
|
||||
CONFIG_USB_CONFIGFS_ECM=y
|
||||
CONFIG_USB_CONFIGFS_RNDIS=y
|
||||
CONFIG_USB_CONFIGFS_EEM=y
|
||||
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
|
||||
CONFIG_USB_CONFIGFS_F_FS=y
|
||||
CONFIG_USB_CONFIGFS_F_UAC1=y
|
||||
CONFIG_USB_CONFIGFS_F_UVC=y
|
||||
CONFIG_USB_CONFIGFS_F_FS=y
|
||||
CONFIG_USB_CONFIGFS_UEVENT=y
|
||||
CONFIG_USB_PHY=y
|
||||
CONFIG_USB_GPIO_VBUS=y
|
||||
@ -0,0 +1,85 @@
|
||||
SIZE_1M = 0x100000
|
||||
SIZE_1K = 1024
|
||||
|
||||
|
||||
# Only attributes in class MemoryMap are generated to .h
|
||||
class MemoryMap:
|
||||
# No prefix "CVIMMAP_" for the items in _no_prefix[]
|
||||
_no_prefix = [
|
||||
"CONFIG_SYS_TEXT_BASE" # u-boot's CONFIG_SYS_TEXT_BASE is used without CPP.
|
||||
]
|
||||
|
||||
DRAM_BASE = 0x80000000
|
||||
DRAM_SIZE = 256 * SIZE_1M
|
||||
|
||||
# ==============
|
||||
# C906L FreeRTOS
|
||||
# ==============
|
||||
FREERTOS_SIZE = 2 * SIZE_1M
|
||||
# FreeRTOS is at the end of DRAM
|
||||
FREERTOS_ADDR = DRAM_BASE + DRAM_SIZE - FREERTOS_SIZE
|
||||
FSBL_C906L_START_ADDR = FREERTOS_ADDR
|
||||
|
||||
# ==============================
|
||||
# OpenSBI | arm-trusted-firmware
|
||||
# ==============================
|
||||
# Monitor is at the begining of DRAM
|
||||
MONITOR_ADDR = DRAM_BASE
|
||||
|
||||
ATF_SIZE = 512 * SIZE_1K
|
||||
OPENSBI_SIZE = 512 * SIZE_1K
|
||||
OPENSBI_FDT_ADDR = MONITOR_ADDR + OPENSBI_SIZE
|
||||
|
||||
# =========================
|
||||
# memory@DRAM_BASE in .dts.
|
||||
# =========================
|
||||
# Ignore the area of FreeRTOS in u-boot and kernel
|
||||
KERNEL_MEMORY_ADDR = DRAM_BASE
|
||||
KERNEL_MEMORY_SIZE = DRAM_SIZE - FREERTOS_SIZE
|
||||
|
||||
# =================
|
||||
# Multimedia buffer. Used by u-boot/kernel/FreeRTOS
|
||||
# =================
|
||||
ION_SIZE = 75 * SIZE_1M
|
||||
H26X_BITSTREAM_SIZE = 2 * SIZE_1M
|
||||
H26X_ENC_BUFF_SIZE = 0
|
||||
ISP_MEM_BASE_SIZE = 20 * SIZE_1M
|
||||
FREERTOS_RESERVED_ION_SIZE = H26X_BITSTREAM_SIZE + H26X_ENC_BUFF_SIZE + ISP_MEM_BASE_SIZE
|
||||
|
||||
# ION after FreeRTOS
|
||||
ION_ADDR = FREERTOS_ADDR - ION_SIZE
|
||||
|
||||
# Buffers of the fast image are inside the ION buffer
|
||||
H26X_BITSTREAM_ADDR = ION_ADDR
|
||||
H26X_ENC_BUFF_ADDR = H26X_BITSTREAM_ADDR + H26X_BITSTREAM_SIZE
|
||||
ISP_MEM_BASE_ADDR = H26X_ENC_BUFF_ADDR + H26X_ENC_BUFF_SIZE
|
||||
|
||||
assert ISP_MEM_BASE_ADDR + ISP_MEM_BASE_SIZE <= ION_ADDR + ION_SIZE
|
||||
|
||||
# Boot logo is after the ION buffer
|
||||
# Framebuffer uses boot logo's reserved memory
|
||||
BOOTLOGO_SIZE = 1800 * SIZE_1K
|
||||
BOOTLOGO_ADDR = ION_ADDR - BOOTLOGO_SIZE
|
||||
FRAMEBUFFER_SIZE = BOOTLOGO_SIZE
|
||||
FRAMEBUFFER_ADDR = BOOTLOGO_ADDR
|
||||
|
||||
# ===================
|
||||
# FSBL and u-boot-2021
|
||||
# ===================
|
||||
CVI_UPDATE_HEADER_SIZE = SIZE_1K
|
||||
UIMAG_SIZE = 16 * SIZE_1M
|
||||
|
||||
# kernel image loading buffer
|
||||
UIMAG_ADDR = DRAM_BASE + 24 * SIZE_1M
|
||||
CVI_UPDATE_HEADER_ADDR = UIMAG_ADDR - CVI_UPDATE_HEADER_SIZE
|
||||
|
||||
# FSBL decompress buffer
|
||||
FSBL_UNZIP_ADDR = UIMAG_ADDR
|
||||
FSBL_UNZIP_SIZE = UIMAG_SIZE
|
||||
|
||||
assert UIMAG_ADDR + UIMAG_SIZE <= BOOTLOGO_ADDR
|
||||
|
||||
# u-boot's run address and entry point
|
||||
CONFIG_SYS_TEXT_BASE = DRAM_BASE + 2 * SIZE_1M
|
||||
# u-boot's init stack point is only used before board_init_f()
|
||||
CONFIG_SYS_INIT_SP_ADDR = UIMAG_ADDR + UIMAG_SIZE
|
||||
@ -0,0 +1,4 @@
|
||||
<physical_partition type="sd">
|
||||
<partition label="BOOT" size_in_kb="131072" readonly="false" file="boot.sd"/>
|
||||
<partition label="ROOTFS" size_in_kb="786560" readonly="false" file="rootfs.sd" />
|
||||
</physical_partition>
|
||||
@ -0,0 +1,17 @@
|
||||
#!/bin/bash
|
||||
|
||||
SYSTEM_DIR=$1
|
||||
rm -rf $SYSTEM_DIR/mnt/system/usr
|
||||
rm -rf $SYSTEM_DIR/mnt/system/lib
|
||||
rm -rf $SYSTEM_DIR/mnt/system/lib/libsns_gc*
|
||||
rm -rf $SYSTEM_DIR/mnt/system/lib/libsns_imx*
|
||||
rm -rf $SYSTEM_DIR/mnt/system/lib/libsns_sc*
|
||||
rm -rf $SYSTEM_DIR/mnt/system/lib/libcipher.so
|
||||
|
||||
rm -rf $SYSTEM_DIR/mnt/system/m2m-deinterlace.ko
|
||||
rm -rf $SYSTEM_DIR/mnt/system/efivarfs.ko
|
||||
|
||||
du -sh $SYSTEM_DIR/* |sort -rh
|
||||
|
||||
rm -rf $SYSTEM_DIR/etc/init.d/S23ntp
|
||||
rm -rf $SYSTEM_DIR/bin/ntpd
|
||||
@ -0,0 +1,35 @@
|
||||
CONFIG_CHIP_sg2002=y
|
||||
CONFIG_BOARD_milkv_duo256m_glibc_arm64_sd=y
|
||||
CONFIG_DDR_CFG_ddr3_1866_x16=y
|
||||
CONFIG_ARCH="arm64"
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CROSS_COMPILE_KERNEL="aarch64-linux-gnu-"
|
||||
CONFIG_KERNEL_ENTRY_HACK=y
|
||||
CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80108000"
|
||||
CONFIG_TOOLCHAIN_GLIBC_ARM64=y
|
||||
CONFIG_FLASH_SIZE_SHRINK=y
|
||||
CONFIG_BOOT_IMAGE_SINGLE_DTB=y
|
||||
CONFIG_STORAGE_TYPE_sd=y
|
||||
CONFIG_SENSOR_GCORE_GC2053=y
|
||||
CONFIG_SENSOR_GCORE_GC2053_1L=y
|
||||
CONFIG_SENSOR_GCORE_GC2093=y
|
||||
CONFIG_SENSOR_GCORE_GC4653=y
|
||||
CONFIG_SENSOR_PIXELPLUS_PR2020=y
|
||||
CONFIG_SENSOR_SONY_IMX307=y
|
||||
CONFIG_SENSOR_SONY_IMX327=y
|
||||
CONFIG_UBOOT_2021_10=y
|
||||
CONFIG_KERNEL_SRC_5.10=y
|
||||
CONFIG_KERNEL_SRC="linux_5.10"
|
||||
CONFIG_KERNEL_LZMA=y
|
||||
CONFIG_SKIP_RAMDISK=y
|
||||
CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
|
||||
CONFIG_ROOTFS_OVERLAYFS=y
|
||||
CONFIG_BUILDROOT_FS=y
|
||||
CONFIG_TARGET_PACKAGE_DROPBEAR=y
|
||||
CONFIG_TARGET_PACKAGE_MTD-UTILS=y
|
||||
# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
|
||||
CONFIG_TARGET_PACKAGE_BUSYBOX_SYSLOGD_SCRIPT=y
|
||||
CONFIG_ENABLE_FREERTOS=y
|
||||
CONFIG_ENABLE_RTOS_DUMP_PRINT=y
|
||||
CONFIG_DUMP_PRINT_SZ_IDX=17
|
||||
CONFIG_TARGET_PACKAGE_NTP=y
|
||||
@ -0,0 +1,70 @@
|
||||
|
||||
static void set_rtc_register_for_power(void)
|
||||
{
|
||||
mmio_write_32(0x050250AC, 0x2);
|
||||
mmio_write_32(0x050260D0, 0x3);
|
||||
mmio_write_32(0x03001098, 0x0);
|
||||
mmio_write_32(0x0300109C, 0x0);
|
||||
mmio_write_32(0x03001090, 0x0);
|
||||
mmio_write_32(0x03001094, 0x0);
|
||||
mmio_write_32(0x05027084, 0x0);
|
||||
mmio_write_32(0x05027088, 0x0);
|
||||
mmio_write_32(0x0502708C, 0x0);
|
||||
mmio_write_32(0x05027090, 0x0);
|
||||
mmio_write_32(0x050260BC, 0x1700);
|
||||
mmio_write_32(0x05026128, 0x0);
|
||||
}
|
||||
|
||||
int cvi_board_init(void)
|
||||
{
|
||||
PINMUX_CONFIG(CAM_MCLK0, CAM_MCLK0);
|
||||
|
||||
PINMUX_CONFIG(IIC3_SCL, IIC3_SCL);
|
||||
PINMUX_CONFIG(IIC3_SDA, IIC3_SDA);
|
||||
|
||||
|
||||
//##########I2C0 ######### demo board i2c0 need using gpio to simulate i2c
|
||||
/*touch panel*/
|
||||
PINMUX_CONFIG(IIC0_SCL, XGPIOA_28);
|
||||
PINMUX_CONFIG(IIC0_SDA, XGPIOA_29);
|
||||
PINMUX_CONFIG(VIVO_D9, XGPIOB_12);
|
||||
PINMUX_CONFIG(VIVO_D8, XGPIOB_13);
|
||||
//#########SENSOR_PWR_EN
|
||||
PINMUX_CONFIG(CAM_PD0, XGPIOA_1);
|
||||
//#########WIFI
|
||||
pinmux_config(PINMUX_SDIO1);
|
||||
PINMUX_CONFIG(VIVO_D10, XGPIOB_11);
|
||||
//########AHD
|
||||
PINMUX_CONFIG(ADC3, IIC4_SCL);
|
||||
PINMUX_CONFIG(ADC2, IIC4_SDA);
|
||||
|
||||
PINMUX_CONFIG(USB_VBUS_EN, XGPIOB_5);
|
||||
PINMUX_CONFIG(PAD_MIPIRX5N, XGPIOC_0);
|
||||
|
||||
//#######tp
|
||||
PINMUX_CONFIG(VIVO_D9, XGPIOB_12);
|
||||
PINMUX_CONFIG(VIVO_D8, XGPIOB_13);
|
||||
//########panel
|
||||
PINMUX_CONFIG(JTAG_CPU_TRST, XGPIOA_20);
|
||||
pinmux_config(PINMUX_DSI);
|
||||
PINMUX_CONFIG(AUX0, XGPIOA_30);
|
||||
PINMUX_CONFIG(PWR_GPIO0, PWR_GPIO_0);
|
||||
|
||||
//######## mipi-dsi
|
||||
PINMUX_CONFIG(PAD_MIPI_TXM0, XGPIOC_12);
|
||||
PINMUX_CONFIG(PAD_MIPI_TXP0, XGPIOC_13);
|
||||
PINMUX_CONFIG(PAD_MIPI_TXM1, XGPIOC_14);
|
||||
PINMUX_CONFIG(PAD_MIPI_TXP1, XGPIOC_15);
|
||||
PINMUX_CONFIG(PAD_MIPI_TXM2, XGPIOC_16);
|
||||
PINMUX_CONFIG(PAD_MIPI_TXP2, XGPIOC_17);
|
||||
PINMUX_CONFIG(PAD_MIPI_TXM3, XGPIOC_20);
|
||||
PINMUX_CONFIG(PAD_MIPI_TXP3, XGPIOC_21);
|
||||
PINMUX_CONFIG(PAD_MIPI_TXM4, XGPIOC_18);
|
||||
PINMUX_CONFIG(PAD_MIPI_TXP4, XGPIOC_19);
|
||||
|
||||
//######## usb
|
||||
PINMUX_CONFIG(USB_VBUS_DET, XGPIOB_6);
|
||||
set_rtc_register_for_power();
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -0,0 +1,13 @@
|
||||
/*
|
||||
*VO control GPIOs
|
||||
*/
|
||||
#define VO_GPIO_RESET_PORT portb
|
||||
#define VO_GPIO_RESET_INDEX 5
|
||||
#define VO_GPIO_RESET_ACTIVE GPIO_ACTIVE_LOW
|
||||
#define VO_GPIO_PWM_PORT portb
|
||||
#define VO_GPIO_PWM_INDEX 4
|
||||
#define VO_GPIO_PWM_ACTIVE GPIO_ACTIVE_HIGH
|
||||
#define VO_GPIO_POWER_CT_PORT portb
|
||||
#define VO_GPIO_POWER_CT_INDEX 3
|
||||
#define VO_GPIO_POWER_CT_ACTIVE GPIO_ACTIVE_HIGH
|
||||
|
||||
@ -0,0 +1,49 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_DEFAULT_DEVICE_TREE="cv181x_asic"
|
||||
CONFIG_IDENT_STRING=" cvitek_cv181x"
|
||||
CONFIG_ARMV8_SET_SMPEN=y
|
||||
CONFIG_TARGET_CVITEK_CV181X=y
|
||||
#CONFIG_CVITEK_SPI_FLASH=y
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_FIT=y
|
||||
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
|
||||
CONFIG_BOOTDELAY=1
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
CONFIG_SYS_PROMPT="soph# "
|
||||
# CONFIG_CMD_CONSOLE is not set
|
||||
# CONFIG_CMD_XIMG is not set
|
||||
# CONFIG_CMD_EDITENV is not set
|
||||
# CONFIG_CMD_CRC32 is not set
|
||||
# CONFIG_CMD_LZMADEC is not set
|
||||
# CONFIG_CMD_UNLZ4 is not set
|
||||
# CONFIG_CMD_UNZIP is not set
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
# CONFIG_CMD_ITEST is not set
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_CVI_SD_UPDATE=y
|
||||
# CONFIG_ISO_PARTITION is not set
|
||||
# CONFIG_EFI_PARTITION is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
CONFIG_MMC_SDHCI_CVITEK=y
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_PHY_SMSC is not set
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_PHY_CVITEK=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_LZ4=y
|
||||
CONFIG_LZMA=y
|
||||
# CONFIG_TOOLS_LIBCRYPTO is not set
|
||||
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
||||
CONFIG_ENV_IS_NOWHERE=y
|
||||
Reference in New Issue
Block a user