System Information ------------------ Raspberry Pi 3 Model B Rev 1.2 PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" Raspberry Pi reference 2023-02-21 Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 25e2319effa91eb95edd9d9209eb9f8a584d67be, stage2 Linux raspi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux Revision : a02082 Serial : 00000000af19d6b0 Model : Raspberry Pi 3 Model B Rev 1.2 Throttled flag : throttled=0x0 Camera : supported=0 detected=0, libcamera interfaces=0 Videocore information --------------------- Mar 17 2023 10:52:42 Copyright (c) 2012 Broadcom version 82f3750a65fadae9a38077e3c2e217ad158c8d54 (clean) (release) (start) alloc failures: 0 compactions: 0 legacy block fails: 0 Filesystem information ---------------------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 59836584 3672020 53700428 7% / devtmpfs 332564 0 332564 0% /dev tmpfs 465716 0 465716 0% /dev/shm tmpfs 186288 2676 183612 2% /run tmpfs 5120 4 5116 1% /run/lock /dev/mmcblk0p1 261108 31380 229728 13% /boot tmpfs 93140 0 93140 0% /run/user/1000 Filename Type Size Used Priority /var/swap file 102396 1536 -2 Package version information --------------------------- raspberrypi-ui-mods: Installed: (none) raspberrypi-sys-mods: Installed: 20230329 openbox: Installed: (none) lxpanel: Installed: (none) pcmanfm: Installed: (none) rpd-plym-splash: Installed: (none) Networking Information ---------------------- eth0: flags=4099 mtu 1500 ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet x.x.x.x netmask x.x.x.x inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 100289 bytes 10533189 (10.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 100289 bytes 10533189 (10.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4163 mtu 1500 inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x inet6 y::y.y.y.y prefixlen 64 scopeid 0x20 inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0 ether m.m.m.m txqueuelen 1000 (Ethernet) RX packets 45126 bytes 4914580 (4.6 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 46192 bytes 7946433 (7.5 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 USB Information --------------- /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M Display Information ------------------- Running (F)KMS, console /sys/class/drm/card0-HDMI-A-1 /sys/class/drm/card0-Writeback-1 Connector 0 (32) HDMI-A-1 (disconnected) Encoder 0 (31) TMDS /sys/kernel/debug/dri/0/state: plane[41]: plane-0 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=0 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[58]: plane-1 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=0 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[69]: plane-2 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=0 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[80]: plane-3 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=0 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[91]: plane-4 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=1 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[101]: plane-5 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=2 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[111]: plane-6 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=3 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[121]: plane-7 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=4 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[131]: plane-8 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=5 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[141]: plane-9 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=6 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[151]: plane-10 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=7 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[161]: plane-11 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=8 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[171]: plane-12 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=9 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[181]: plane-13 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=a color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[191]: plane-14 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=b color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[201]: plane-15 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=c color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[211]: plane-16 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=d color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[221]: plane-17 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=e color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[231]: plane-18 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=f color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[241]: plane-19 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=10 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[251]: plane-20 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=11 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[261]: plane-21 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=11 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[271]: plane-22 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=11 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range plane[281]: plane-23 crtc=(null) fb=0 crtc-pos=0x0+0+0 src-pos=0.000000x0.000000+0.000000+0.000000 rotation=1 normalized-zpos=11 color-encoding=ITU-R BT.709 YCbCr color-range=YCbCr limited range crtc[51]: txp enable=0 active=0 self_refresh_active=0 planes_changed=0 mode_changed=0 active_changed=0 connectors_changed=0 color_mgmt_changed=0 plane_mask=0 connector_mask=0 encoder_mask=0 mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 crtc[68]: pixelvalve-0 enable=0 active=0 self_refresh_active=0 planes_changed=0 mode_changed=0 active_changed=0 connectors_changed=0 color_mgmt_changed=0 plane_mask=0 connector_mask=0 encoder_mask=0 mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 crtc[79]: pixelvalve-1 enable=0 active=0 self_refresh_active=0 planes_changed=0 mode_changed=0 active_changed=0 connectors_changed=0 color_mgmt_changed=0 plane_mask=0 connector_mask=0 encoder_mask=0 mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 crtc[90]: pixelvalve-2 enable=0 active=0 self_refresh_active=0 planes_changed=0 mode_changed=0 active_changed=0 connectors_changed=0 color_mgmt_changed=0 plane_mask=0 connector_mask=0 encoder_mask=0 mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0 connector[32]: HDMI-A-1 crtc=(null) self_refresh_aware=0 max_requested_bpc=8 connector[57]: Writeback-1 crtc=(null) self_refresh_aware=0 max_requested_bpc=0 config.txt ---------- aphy_params_current=819 arm_64bit=1 arm_freq=1200 arm_freq_min=600 audio_pwm_mode=514 camera_auto_detect=1 config_hdmi_boost=5 core_freq=400 desired_osc_freq=0x387520 disable_commandline_tags=2 disable_l2cache=1 disable_overscan=1 display_auto_detect=1 display_hdmi_rotate=-1 display_lcd_rotate=-1 dphy_params_current=547 dvfs=3 enable_tvout=1 enable_uart=1 force_eeprom_read=1 force_pwm_open=1 framebuffer_ignore_alpha=1 framebuffer_swap=1 gpu_freq=300 init_uart_clock=0x2dc6c00 lcd_framerate=60 mask_gpu_interrupt0=3072 mask_gpu_interrupt1=26370 max_framebuffers=2 over_voltage_avs=0x16e36 pause_burst_frames=1 program_serial_random=1 sdram_freq=450 total_mem=1024 hdmi_force_cec_address:0=65535 hdmi_force_cec_address:1=65535 hdmi_pixel_freq_limit:0=0x9a7ec80 device_tree=- overlay_prefix=overlays/ hdmi_cvt:0= hdmi_cvt:1= hdmi_edid_filename:0= hdmi_edid_filename:1= hdmi_timings:0= hdmi_timings:1= cmdline.txt ----------- coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b08bdaf8-02 rootfstype=ext4 fsck.repair=yes rootwait raspi-gpio settings ------------------- BANK0 (GPIO 0 to 27): GPIO 0: level=1 fsel=0 func=INPUT GPIO 1: level=1 fsel=0 func=INPUT GPIO 2: level=1 fsel=4 alt=0 func=SDA1 GPIO 3: level=1 fsel=4 alt=0 func=SCL1 GPIO 4: level=1 fsel=0 func=INPUT GPIO 5: level=1 fsel=0 func=INPUT GPIO 6: level=1 fsel=0 func=INPUT GPIO 7: level=1 fsel=1 func=OUTPUT GPIO 8: level=1 fsel=1 func=OUTPUT GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK GPIO 12: level=0 fsel=0 func=INPUT GPIO 13: level=0 fsel=0 func=INPUT GPIO 14: level=1 fsel=2 alt=5 func=TXD1 GPIO 15: level=1 fsel=2 alt=5 func=RXD1 GPIO 16: level=0 fsel=0 func=INPUT GPIO 17: level=0 fsel=0 func=INPUT GPIO 18: level=0 fsel=0 func=INPUT GPIO 19: level=0 fsel=0 func=INPUT GPIO 20: level=0 fsel=0 func=INPUT GPIO 21: level=0 fsel=0 func=INPUT GPIO 22: level=0 fsel=0 func=INPUT GPIO 23: level=0 fsel=0 func=INPUT GPIO 24: level=0 fsel=0 func=INPUT GPIO 25: level=0 fsel=0 func=INPUT GPIO 26: level=1 fsel=1 func=OUTPUT GPIO 27: level=0 fsel=0 func=INPUT BANK1 (GPIO 28 to 45): GPIO 28: level=0 fsel=0 func=INPUT GPIO 29: level=1 fsel=0 func=INPUT GPIO 30: level=0 fsel=0 func=INPUT GPIO 31: level=0 fsel=0 func=INPUT GPIO 32: level=1 fsel=7 alt=3 func=TXD0 GPIO 33: level=1 fsel=7 alt=3 func=RXD0 GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 GPIO 40: level=0 fsel=4 alt=0 func=PWM0 GPIO 41: level=0 fsel=4 alt=0 func=PWM1 GPIO 42: level=1 fsel=4 alt=0 func=GPCLK1 GPIO 43: level=0 fsel=4 alt=0 func=GPCLK2 GPIO 44: level=1 fsel=0 func=INPUT GPIO 45: level=1 fsel=0 func=INPUT BANK2 (GPIO 46 to 53): GPIO 46: level=1 fsel=0 func=INPUT GPIO 47: level=1 fsel=1 func=OUTPUT GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0 GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1 GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2 GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3 vcdbg log messages ------------------ dmesg log --------- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.21-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] On node 0, zone DMA: 19456 pages in unavailable ranges [ 0.000000] percpu: Embedded 29 pages/cpu s78504 r8192 d32088 u118784 [ 0.000000] pcpu-alloc: s78504 r8192 d32088 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 843419 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b08bdaf8-02 rootfstype=ext4 fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 665128K/970752K available (11776K kernel code, 2106K rwdata, 3688K rodata, 4160K init, 1077K bss, 43480K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 39744 entries in 156 pages [ 0.000000] ftrace: allocated 156 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000379] Console: colour dummy device 80x25 [ 0.001374] printk: console [tty1] enabled [ 0.001466] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001533] pid_max: default: 32768 minimum: 301 [ 0.001733] LSM: Security Framework initializing [ 0.002009] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002080] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.003993] cgroup: Disabling memory control group subsystem [ 0.007207] cblist_init_generic: Setting adjustable number of callback queues. [ 0.007258] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.007552] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.007838] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.008571] rcu: Hierarchical SRCU implementation. [ 0.008610] rcu: Max phase no-delay instances is 1000. [ 0.010396] EFI services will not be available. [ 0.011163] smp: Bringing up secondary CPUs ... [ 0.012873] Detected VIPT I-cache on CPU1 [ 0.013050] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.014797] Detected VIPT I-cache on CPU2 [ 0.014939] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.016711] Detected VIPT I-cache on CPU3 [ 0.016855] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.017088] smp: Brought up 1 node, 4 CPUs [ 0.017251] SMP: Total of 4 processors activated. [ 0.017287] CPU features: detected: 32-bit EL0 Support [ 0.017321] CPU features: detected: 32-bit EL1 Support [ 0.017358] CPU features: detected: CRC32 instructions [ 0.017552] CPU: All CPU(s) started at EL2 [ 0.017603] alternatives: applying system-wide alternatives [ 0.020178] devtmpfs: initialized [ 0.045054] Enabled cp15_barrier support [ 0.045139] Enabled setend support [ 0.045496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.045573] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.057234] pinctrl core: initialized pinctrl subsystem [ 0.058594] DMI not present or invalid. [ 0.059637] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.071738] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.072203] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.073785] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.073976] audit: initializing netlink subsys (disabled) [ 0.074436] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1 [ 0.075479] thermal_sys: Registered thermal governor 'step_wise' [ 0.075613] cpuidle: using governor menu [ 0.076343] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.076707] ASID allocator initialised with 32768 entries [ 0.076994] Serial: AMBA PL011 UART driver [ 0.094621] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.120658] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start [ 0.124677] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54 [ 0.137847] KASLR enabled [ 0.193254] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.200304] SCSI subsystem initialized [ 0.200708] usbcore: registered new interface driver usbfs [ 0.200825] usbcore: registered new interface driver hub [ 0.200952] usbcore: registered new device driver usb [ 0.201630] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.202005] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.202473] pps_core: LinuxPPS API ver. 1 registered [ 0.202511] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.202598] PTP clock support registered [ 0.204384] vgaarb: loaded [ 0.205634] clocksource: Switched to clocksource arch_sys_counter [ 0.206444] VFS: Disk quotas dquot_6.6.0 [ 0.206585] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.206912] FS-Cache: Loaded [ 0.207211] CacheFiles: Loaded [ 0.223978] NET: Registered PF_INET protocol family [ 0.224433] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.226865] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.227087] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.227153] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.227310] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.227705] TCP: Hash tables configured (established 8192 bind 8192) [ 0.227967] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.228058] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.228430] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.229467] RPC: Registered named UNIX socket transport module. [ 0.229513] RPC: Registered udp transport module. [ 0.229548] RPC: Registered tcp transport module. [ 0.229582] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.229686] PCI: CLS 0 bytes, default 64 [ 0.232461] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.232898] kvm [1]: IPA Size Limit: 40 bits [ 0.234760] kvm [1]: Hyp mode initialized successfully [ 2.015102] Initialise system trusted keyrings [ 2.015786] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 2.029092] zbud: loaded [ 2.033882] NFS: Registering the id_resolver key type [ 2.033978] Key type id_resolver registered [ 2.034015] Key type id_legacy registered [ 2.034216] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.034264] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.036438] Key type asymmetric registered [ 2.036485] Asymmetric key parser 'x509' registered [ 2.036631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.037056] io scheduler mq-deadline registered [ 2.037102] io scheduler kyber registered [ 2.048574] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes [ 2.048653] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880 [ 2.052483] Console: switching to colour frame buffer device 90x30 [ 2.057412] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered! [ 2.067271] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 2.073233] bcm2835-rng 3f104000.rng: hwrng registered [ 2.076329] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 2.082507] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 2.105074] brd: module loaded [ 2.121358] loop: module loaded [ 2.124522] Loading iSCSI transport class v2.0-870. [ 2.134045] usbcore: registered new interface driver r8152 [ 2.136152] usbcore: registered new interface driver lan78xx [ 2.138203] usbcore: registered new interface driver smsc95xx [ 2.140834] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.871297] Core Release: 2.80a [ 2.873119] Setting default values for core params [ 2.874997] Finished setting default values for core params [ 3.077311] Using Buffer DMA mode [ 3.079100] Periodic Transfer Interrupt Enhancement - disabled [ 3.080905] Multiprocessor Interrupt Enhancement - disabled [ 3.082752] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 3.084557] Dedicated Tx FIFOs mode [ 3.091477] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = ffffffc008459000 dma = 0x00000000df000000 len=9024 [ 3.096585] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 3.104537] dwc_otg: Microframe scheduler enabled [ 3.104615] WARN::hcd_init_fiq:497: MPHI regs_base at ffffffc00806d000 [ 3.107656] dwc_otg 3f980000.usb: DWC OTG Controller [ 3.109208] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 3.110844] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000 [ 3.112434] Init: Port Power? op_state=1 [ 3.114013] Init: Power Port (0) [ 3.116140] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.119390] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.121127] usb usb1: Product: DWC OTG Controller [ 3.122857] usb usb1: Manufacturer: Linux 6.1.21-v8+ dwc_otg_hcd [ 3.124570] usb usb1: SerialNumber: 3f980000.usb [ 3.127426] hub 1-0:1.0: USB hub found [ 3.129164] hub 1-0:1.0: 1 port detected [ 3.132172] dwc_otg: FIQ enabled [ 3.132192] dwc_otg: NAK holdoff enabled [ 3.132208] dwc_otg: FIQ split-transaction FSM enabled [ 3.132236] Module dwc_common_port init [ 3.133073] usbcore: registered new interface driver uas [ 3.134936] usbcore: registered new interface driver usb-storage [ 3.136945] mousedev: PS/2 mouse device common for all mice [ 3.146042] sdhci: Secure Digital Host Controller Interface driver [ 3.147660] sdhci: Copyright(c) Pierre Ossman [ 3.150208] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.155834] ledtrig-cpu: registered to indicate activity on CPUs [ 3.158090] hid: raw HID events driver (C) Jiri Kosina [ 3.160068] usbcore: registered new interface driver usbhid [ 3.161764] usbhid: USB HID core driver [ 3.171864] NET: Registered PF_PACKET protocol family [ 3.173771] Key type dns_resolver registered [ 3.177768] registered taskstats version 1 [ 3.179473] Loading compiled-in X.509 certificates [ 3.182364] Key type .fscrypt registered [ 3.183941] Key type fscrypt-provisioning registered [ 3.212576] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 3.214466] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2 [ 3.222635] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default [ 3.225382] printk: console [ttyS0] disabled [ 3.227239] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 71, base_baud = 50000000) is a 16550 [ 3.241892] Indeed it is in host mode hprt0 = 00021501 [ 3.255246] printk: console [ttyS0] enabled [ 3.457685] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.460378] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 3.466836] Indeed it is in host mode hprt0 = 00001101 [ 3.472226] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.686567] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 3.696641] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 3.696980] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.698942] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 3.703239] hub 1-1:1.0: USB hub found [ 3.734550] sdhost: log_buf @ 00000000d6f416cf (c2ac5000) [ 3.741664] hub 1-1:1.0: 5 ports detected [ 3.802683] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 4.113689] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.124961] of_cfs_init [ 4.249913] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 4.253747] of_cfs_init: OK [ 4.257111] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.295010] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.332941] smsc95xx v2.0.0 [ 4.336236] mmc0: Problem switching card into high-speed mode! [ 4.575685] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=184) [ 4.586162] mmc0: new SDXC card at address 0001 [ 4.601667] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, m.m.m.m [ 4.610883] mmcblk0: mmc0:0001 SD 58.2 GiB [ 4.707379] mmcblk0: p1 p2 [ 4.713325] mmcblk0: mmc0:0001 SD 58.2 GiB [ 4.740278] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 4.749898] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 4.849367] mmc1: new high speed SDIO card at address 0001 [ 5.857778] EXT4-fs (mmcblk0p2): recovery complete [ 5.873256] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 5.886030] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 5.910453] devtmpfs: mounted [ 5.927322] Freeing unused kernel memory: 4160K [ 5.934216] Run /sbin/init as init process [ 5.940384] with arguments: [ 5.940401] /sbin/init [ 5.940418] with environment: [ 5.940434] HOME=/ [ 5.940450] TERM=linux [ 7.037127] systemd[1]: System time before build time, advancing clock. [ 7.371237] NET: Registered PF_INET6 protocol family [ 7.381223] Segment Routing with IPv6 [ 7.387060] In-situ OAM (IOAM) with IPv6 [ 7.529197] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 7.560107] systemd[1]: Detected architecture arm64. [ 7.600314] systemd[1]: Set hostname to . [ 8.859094] systemd[1]: Queued start job for default target Multi-User System. [ 8.888251] systemd[1]: Created slice system-getty.slice. [ 8.900837] systemd[1]: Created slice system-modprobe.slice. [ 8.912996] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.926096] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 8.938542] systemd[1]: Created slice User and Session Slice. [ 8.949779] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.963219] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.977379] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.994428] systemd[1]: Reached target Local Encrypted Volumes. [ 9.005518] systemd[1]: Reached target Paths. [ 9.014918] systemd[1]: Reached target Slices. [ 9.024327] systemd[1]: Reached target Swap. [ 9.039456] systemd[1]: Listening on Syslog Socket. [ 9.050630] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.062884] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.076326] systemd[1]: Listening on Journal Audit Socket. [ 9.088078] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.100550] systemd[1]: Listening on Journal Socket. [ 9.113390] systemd[1]: Listening on udev Control Socket. [ 9.124898] systemd[1]: Listening on udev Kernel Socket. [ 9.136377] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 9.170386] systemd[1]: Mounting POSIX Message Queue File System... [ 9.188446] systemd[1]: Mounting RPC Pipe File System... [ 9.206458] systemd[1]: Mounting Kernel Debug File System... [ 9.224502] systemd[1]: Mounting Kernel Trace File System... [ 9.236006] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 9.262957] systemd[1]: Starting Restore / save the current clock... [ 9.282327] systemd[1]: Starting Set the console keyboard layout... [ 9.302071] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 9.326151] systemd[1]: Starting Load Kernel Module configfs... [ 9.345924] systemd[1]: Starting Load Kernel Module drm... [ 9.364601] systemd[1]: Starting Load Kernel Module fuse... [ 9.387342] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 9.430493] systemd[1]: Starting File System Check on Root Device... [ 9.465600] systemd[1]: Starting Journal Service... [ 9.468321] fuse: init (API version 7.37) [ 9.506463] systemd[1]: Starting Load Kernel Modules... [ 9.538768] systemd[1]: Starting Coldplug All udev Devices... [ 9.587197] systemd[1]: Mounted POSIX Message Queue File System. [ 9.603372] systemd[1]: Mounted RPC Pipe File System. [ 9.615550] systemd[1]: Mounted Kernel Debug File System. [ 9.626640] systemd[1]: Mounted Kernel Trace File System. [ 9.644322] systemd[1]: Finished Restore / save the current clock. [ 9.659875] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 9.679480] systemd[1]: modprobe@configfs.service: Succeeded. [ 9.690357] systemd[1]: Finished Load Kernel Module configfs. [ 9.704410] systemd[1]: modprobe@drm.service: Succeeded. [ 9.719453] systemd[1]: Finished Load Kernel Module drm. [ 9.733337] systemd[1]: modprobe@fuse.service: Succeeded. [ 9.743582] systemd[1]: Finished Load Kernel Module fuse. [ 9.786421] i2c_dev: i2c /dev entries driver [ 9.795403] systemd[1]: Mounting FUSE Control File System... [ 9.814027] systemd[1]: Mounting Kernel Configuration File System... [ 9.832847] systemd[1]: Started File System Check Daemon to report status. [ 9.857933] systemd[1]: Finished Load Kernel Modules. [ 9.869218] systemd[1]: Mounted FUSE Control File System. [ 9.881209] systemd[1]: Mounted Kernel Configuration File System. [ 9.927349] systemd[1]: Starting Apply Kernel Variables... [ 10.006642] systemd[1]: Finished Apply Kernel Variables. [ 10.077154] systemd[1]: Finished File System Check on Root Device. [ 10.109829] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.127629] systemd[1]: Started Journal Service. [ 10.370975] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [ 10.485303] systemd-journald[144]: Received client request to flush runtime journal. [ 12.987451] mc: Linux media interface: v0.10 [ 13.023011] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 13.037090] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 13.037162] [vc_sm_connected_init]: start [ 13.046309] [vc_sm_connected_init]: installed successfully [ 13.094371] videodev: Linux video capture interface: v2.00 [ 13.202981] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 13.207412] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 13.228756] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 13.229310] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 13.238539] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 13.243344] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 13.245394] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 13.246662] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 13.247553] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 13.247609] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 13.247645] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 13.247676] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 13.247707] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 13.252237] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 13.253181] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 13.254221] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 13.255114] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 13.255186] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 13.255223] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 13.255285] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 13.255317] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 13.255938] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 13.282741] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 13.302886] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 13.302990] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 13.314557] bcm2835_audio bcm2835_audio: card created with 8 channels [ 13.317669] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 13.317763] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 13.333474] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 13.333552] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 13.340340] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 13.340444] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 13.348830] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 13.348930] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 14.115542] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.185520] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 14.214993] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 14.646614] Console: switching to colour dummy device 80x25 [ 14.656236] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 14.670766] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 14.671807] usbcore: registered new interface driver brcmfmac [ 14.677599] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 14.696660] Registered IR keymap rc-cec [ 14.696988] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0 [ 14.697410] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0 [ 14.728586] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 14.729344] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 14.742100] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 14.742731] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 14.743296] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 14.743745] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 14.784865] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 14.793145] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes [ 15.077916] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897 [ 16.203617] uart-pl011 3f201000.serial: no DMA platform data [ 16.576466] 8021q: 802.1Q VLAN Support v1.8 [ 16.657070] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 17.311521] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 17.773247] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 17.779194] smsc95xx 1-1.1:1.0 eth0: Link is Down [ 18.741371] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 20.174689] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead [ 22.012535] Bluetooth: Core ver 2.22 [ 22.012679] NET: Registered PF_BLUETOOTH protocol family [ 22.012690] Bluetooth: HCI device and connection manager initialized [ 22.012721] Bluetooth: HCI socket layer initialized [ 22.012738] Bluetooth: L2CAP socket layer initialized [ 22.012767] Bluetooth: SCO socket layer initialized [ 22.027643] Bluetooth: HCI UART driver ver 2.3 [ 22.027677] Bluetooth: HCI UART protocol H4 registered [ 22.027806] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 22.028123] Bluetooth: HCI UART protocol Broadcom registered [ 23.003696] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.003736] Bluetooth: BNEP filters: protocol multicast [ 23.003775] Bluetooth: BNEP socket layer initialized [ 23.016222] Bluetooth: MGMT ver 1.22 [ 23.038455] NET: Registered PF_ALG protocol family