[ Upstream commit 22a8118d329334833cd30f2ceb36d28e8cae8a4f ]
After allocation, output and decomp_output both point to memory chunks of
size COMP_BUF_SIZE. Then, only the first bytes are zeroed out using
sizeof(COMP_BUF_SIZE) as parameter to memset(), because
sizeof(COMP_BUF_SIZE) provides the size of the constant and not the size of
allocated memory.
Instead, the whole allocated memory is meant to be zeroed out. Use
COMP_BUF_SIZE as parameter to memset() directly in order to accomplish
this.
Fixes: 336073840a ("crypto: testmgr - Allow different compression results")
Signed-off-by: Michael Schupikov <michael@schupikov.de>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51e68fb0929c29e47e9074ca3e99ffd6021a1c5a ]
In some error paths, reference count of firewire unit is not decreased.
This commit fixes the bug.
Fixes: 5b14ec25a79b('ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65a576e27309120e0621f54d5c81eb9128bd56be ]
NL80211_TX_POWER_LIMITED was treated as NL80211_TX_POWER_AUTOMATIC,
which is the opposite of what should happen and can cause nasty
regulatory problems.
if/else converted to a switch without default to make gcc warn
on unhandled enum values.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2d691aeca4aecbb8d0414a777a46981a8e142b05 upstream.
set_page_dirty says:
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012
Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: cb6d7c7dc7ff ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: 505a8ec7e11a ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References: 6dcc693bc5 ("ext4: warn when page is dirtied without buffers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
(cherry picked from commit 0d4bbe3d407f79438dc4f87943db21f7134cfc65)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit cee7fb437edcdb2f9f8affa959e274997f5dca4d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a63236f1ad82d71a98aa80320b6cb618fb32f44 upstream.
It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in
remove_stable_node() when it races with __mmput() and squeezes in
between ksm_exit() and exit_mmap().
WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150
Call Trace:
remove_all_stable_nodes+0x12b/0x330
run_store+0x4ef/0x7b0
kernfs_fop_write+0x200/0x420
vfs_write+0x154/0x450
ksys_write+0xf9/0x1d0
do_syscall_64+0x99/0x510
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Remove the warning as there is nothing scary going on.
Link: http://lkml.kernel.org/r/20191119131850.5675-1-aryabinin@virtuozzo.com
Fixes: cbf86cfe04 ("ksm: remove old stable nodes more thoroughly")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d791cfcbf98191122af70b053a21075cb450d119 upstream.
When we hot unplug a virtserialport and then try to hot plug again,
it fails:
(qemu) chardev-add socket,id=serial0,path=/tmp/serial0,server,nowait
(qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\
chardev=serial0,id=serial0,name=serial0
(qemu) device_del serial0
(qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\
chardev=serial0,id=serial0,name=serial0
kernel error:
virtio-ports vport2p2: Error allocating inbufs
qemu error:
virtio-serial-bus: Guest failure in adding port 2 for device \
virtio-serial0.0
This happens because buffers for the in_vq are allocated when the port is
added but are not released when the port is unplugged.
They are only released when virtconsole is removed (see a7a69ec0d8)
To avoid the problem and to be symmetric, we could allocate all the buffers
in init_vqs() as they are released in remove_vqs(), but it sounds like
a waste of memory.
Rather than that, this patch changes add_port() logic to ignore ENOSPC
error in fill_queue(), which means queue has already been filled.
Fixes: a7a69ec0d8 ("virtio_console: free buffers after reset")
Cc: mst@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0161a94e2d1c713bd34d72bc0239d87c31747bf7 upstream.
gpio tools fail to build correctly with make parallelization:
$ make -s -j24
ld: gpio-utils.o: file not recognized: file truncated
make[1]: *** [/home/labbott/linux_upstream/tools/build/Makefile.build:145: lsgpio-in.o] Error 1
make: *** [Makefile:43: lsgpio-in.o] Error 2
make: *** Waiting for unfinished jobs....
This is because gpio-utils.o is used across multiple targets.
Fix this by making gpio-utios.o a proper dependency.
Cc: <stable@vger.kernel.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0391479ae04dfcbd208b9571c375064caad9a57 upstream.
When converting milliseconds to microseconds in commit fffa6af94894
("gpio: max77620: Use correct unit for debounce times") some ~1 ms gaps
were introduced between the various ranges supported by the controller.
Fix this by changing the start of each range to the value immediately
following the end of the previous range. This way a debounce time of,
say 8250 us will translate into 16 ms instead of returning an -EINVAL
error.
Typically the debounce delay is only ever set through device tree and
specified in milliseconds, so we can never really hit this issue because
debounce times are always a multiple of 1000 us.
The only notable exception for this is drivers/mmc/host/mmc-spi.c where
the CD GPIO is requested, which passes a 1 us debounce time. According
to a comment preceeding that code this should actually be 1 ms (i.e.
1000 us).
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dbd3e66e7785a2f055bf84d98de9b8fd31ff3f5 upstream.
If the packets to sent to the guest are bigger than the buffer
available, we can split them, using multiple buffers and fixing
the length in the packet header.
This is safe since virtio-vsock supports only stream sockets.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 97fd8da281f80e7e69e0114bc906575734d4dfaf ]
Once all the large flow groups (defined by the user when the flow table
is created - max_num_groups) were created, then all the following new
flow groups will have only one flow table entry, even though the flow table
has place to larger groups.
Fix the condition to prefer large flow group.
Fixes: f0d22d1874 ("net/mlx5_core: Introduce flow steering autogrouped flow table")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 30e9e0550bf693c94bc15827781fe42dd60be634 ]
Array mlxfw_fsm_state_err_str contains value to string translation, when
values are provided by mlxfw_dev. If value is larger than
MLXFW_FSM_STATE_ERR_MAX, return "unknown error" as expected instead of
reading an address than exceed array size.
Fixes: 410ed13cae ("Add the mlxfw module for Mellanox firmware flash process")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 723eb53690041740a13ac78efeaf6804f5d684c9 ]
The workqueue only exists for the primary PF. For other functions
we hit a WARN_ON in kernel/workqueue.c.
Fixes: 7c236c43b8 ("sfc: Add support for IEEE-1588 PTP")
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4f0e97d070984d487df027f163e52bb72d1713d8 ]
info->options_len is 'u8' type, and when opts_len with a value >
IP_TUNNEL_OPTS_MAX, 'info->options_len = opts_len' will cast int
to u8 and set a wrong value to info->options_len.
Kernel crashed in my test when doing:
# opts="0102:80:00800022"
# for i in {1..99}; do opts="$opts,0102:80:00800022"; done
# ip link add name geneve0 type geneve dstport 0 external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 ip_proto udp action tunnel_key \
set src_ip 10.0.99.192 dst_ip 10.0.99.193 \
dst_port 6081 id 11 geneve_opts $opts \
action mirred egress redirect dev geneve0
So we should do the similar check as cls_flower does, return error
when opts_len > IP_TUNNEL_OPTS_MAX in tunnel_key_copy_opts().
Fixes: 0ed5269f9e ("net/sched: add tunnel option support to act_tunnel_key")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2744bf42680f64ebf2ee8a00354897857c073331 ]
XDP_TX rings should not be limited by max_num_tx_rings_p_up.
To make sure total number of TX rings never exceed MAX_TX_RINGS,
add similar check in mlx4_en_alloc_tx_queue_per_tc(), where
a new value is assigned for num_up.
Fixes: 7e1dc5e926 ("net/mlx4_en: Limit the number of TX rings")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 34e59836565e36fade1464e054a3551c1a0364be ]
ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the
total number of entries in the rx classifier table. Surprisingly, mlx4
is missing this part (in principle ethtool could still move forward and
try the insert).
Tested: compiled and run command:
phh13:~# ethtool -N eth1 flow-type udp4 queue 4
Added rule with ID 255
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1fc1657775dc1b19e9ac1d46b4054ed8ae5d99ab ]
The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a
GRE tunnel. For a tunnel without a bound device, it uses the same VRF that
the tunnel is in. However in Linux, a GRE tunnel without a bound device
uses the main VRF as the underlay. Fix the function accordingly.
mlxsw further assumed that moving a tunnel to a different VRF could cause
conflict in local tunnel endpoint address, which cannot be offloaded.
However, the only way that an underlay could be changed by moving the
tunnel device itself is if the tunnel device does not have a bound device.
But in that case the underlay is always the main VRF, so there is no
opportunity to introduce a conflict by moving such device. Thus this check
constitutes a dead code, and can be removed, which do.
Fixes: 6ddb7426a7 ("mlxsw: spectrum_router: Introduce loopback RIFs")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52eb74339a6233c69f4e3794b69ea7c98eeeae1b ]
rdt_find_domain() returns an ERR_PTR() that is generated from a provided
domain id when the value is negative.
Care needs to be taken when creating an ERR_PTR() from this value
because a subsequent check using IS_ERR() expects the error to
be within the MAX_ERRNO range. Using an invalid domain id as an
ERR_PTR() does work at this time since this is currently always -1.
Using this undocumented assumption is fragile since future users of
rdt_find_domain() may not be aware of thus assumption.
Two related issues are addressed:
- Ensure that rdt_find_domain() always returns a valid error value by
forcing the error to be -ENODEV when a negative domain id is provided.
- In a few instances the return value of rdt_find_domain() is just
checked for NULL - fix these to include a check of ERR_PTR.
Fixes: d89b737901 ("x86/intel_rdt/cqm: Add mon_data")
Fixes: 521348b011d6 ("x86/intel_rdt: Introduce utility to obtain CDP peer")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: fenghua.yu@intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/b88cd4ff6a75995bf8db9b0ea546908fe50f69f3.1544479852.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51b72656bb39fdcb8f3174f4007bcc83ad1d275f ]
If an SCC error occurs during a read/write command execution, a false
positive CRC error message is output.
mmcblk0: response CRC error sending r/w cmd command, card status 0x900
check_scc_error() checks SCC_RVSREQ.RVSERR bit. RVSERR detects a
correction error in the next (up or down) delay tap position. However,
since the command is successful, only retuning needs to be executed.
This has been confirmed by HW engineers.
Thus, on SCC error, set retuning flag instead of setting an error code.
Fixes: b85fb0a1c8ae ("mmc: tmio: Fix SCC error detection")
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: updated comment and commit message, removed some braces]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4d16ab58c41ff0125822464bdff074cebd0fe47 ]
In the recent commit 8b78fdb045de ("powerpc/time: Use
clockevents_register_device(), fixing an issue with large
decrementer") we changed the way we initialise the decrementer
clockevent(s).
We no longer initialise the mult & shift values of
decrementer_clockevent itself.
This has the effect of breaking PR KVM, because it uses those values
in kvmppc_emulate_dec(). The symptom is guest kernels spin forever
mid-way through boot.
For now fix it by assigning back to decrementer_clockevent the mult
and shift values.
Fixes: 8b78fdb045de ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a5e0af240e07dd3d4897eb8ff52aab757da7fab ]
pcitest is currently broken due to the following compiler error
and related warning. Fix by changing the run_test() function
signature to return an integer result.
pcitest.c: In function run_test:
pcitest.c:143:9: warning: return with a value, in function
returning void
return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */
pcitest.c: In function main:
pcitest.c:232:9: error: void value not ignored as it ought to be
return run_test(test);
Fixes: fef31ecaaf2c ("tools: PCI: Fix compilation warnings")
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b53b0128052ffd687797d5f4deeb76327e7b5711 ]
The patch 23c7b54ca1cd: "PM / devfreq: Fix devfreq_add_device() when
drivers are built as modules." leads to the following static checker
warning:
drivers/devfreq/devfreq.c:1043 governor_store()
warn: 'governor' can also be NULL
The reason is that the try_then_request_governor() function returns both
error pointers and NULL. It should just return error pointers, so fix
this by returning a ERR_PTR to the error intead of returning NULL.
Fixes: 23c7b54ca1cd ("PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8afd03486c26accdda4846e5561aa3f8e862a9d ]
Commit 48402cee6889 ("ACPI / LPSS: Resume BYT/CHT I2C controllers from
resume_noirq") makes acpi_lpss_{suspend_late,resume_early}() bail early
on BYT/CHT as resume_from_noirq is set.
This means that on resume from hibernate dw_i2c_plat_resume() doesn't get
called by the restore_early callback, acpi_lpss_resume_early(). Instead it
should be called by the restore_noirq callback matching how things are done
when resume_from_noirq is set and we are doing a regular resume.
Change the restore_noirq callback to acpi_lpss_resume_noirq so that
dw_i2c_plat_resume() gets properly called when resume_from_noirq is set
and we are resuming from hibernate.
Likewise also change the poweroff_noirq callback so that
dw_i2c_plat_suspend gets called properly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202139
Fixes: 48402cee6889 ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 041a14d2671573611ffd6412bc16e2f64469f7fb ]
Previously receiver buffer auto-tuning starts after receiving
one advertised window amount of data. After the initial receiver
buffer was raised by patch a337531b942b ("tcp: up initial rmem to
128KB and SYN rwin to around 64KB"), the reciver buffer may take
too long to start raising. To address this issue, this patch lowers
the initial bytes expected to receive roughly the expected sender's
initial window.
Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a763ecc15d0e37c3a15ff6825183061209832685 ]
OMAP5's Super-Speed USB port has a software mailbox register
that needs to be fed with VBUS and ID events from an external
VBUS/ID comparator.
Without this, Host role will not work correctly.
Fixes: 656c1a65ab55 ("ARM: dts: omap5: enable OTG role for DWC3 controller")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5050f6ae253ad1307af3486c26fc4f94287078b7 ]
VxLAN FDB updates are sent with the VxLAN device which is not our upper
and will therefore be ignored by current code.
Solve this by checking whether the upper device (bridge) is our upper.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd8fd2cbc73f8650f651da71fc61a6e4f30c1566 ]
The rxconf and txconf structs are allocated on the
stack, so make sure we zero them before filling out
the relevant fields.
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 972b66b86f85f4e8201db454f4c3e9d990cf9836 ]
Long/short preamble selection cannot be sampled separately, since it
depends on the BSS state. Because of that, sampling attempts to
currently not used preamble modes are not counted in the statistics,
which leads to CCK rates being sampled too often.
Fix statistics accounting for long/short preamble by increasing the
index where necessary.
Fix excessive CCK rate sampling by dropping unsupported sample attempts.
This improves throughput on 2.4 GHz channels
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80df9be67c44cb636bbc92caeddad8caf334c53c ]
Fixes a harmless underflow issue when CCK rates are actively being used
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37439f2d6e43ae79e22be9be159f0af157468f82 ]
mi->supported[MINSTREL_CCK_GROUP] needs to be updated
short preamble rates need to be marked as supported regardless of
whether it's currently enabled. Its state can change at any time without
a rate_update call.
Fixes: 782dda00ab ("mac80211: minstrel_ht: move short preamble check out of get_rate")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dac3583bf1a61db6aaf31dfd752c677a4400afd ]
It is not safe to dereference an object before a null test. It is
not needed and just remove them. Ftrace can be used instead.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d701d8117200399d85e63a737d2e4e897932f3b6 ]
Zero pad private area, otherwise we expose private kernel pointer to
userspace. This patch also zeroes the tail area after the ->matchsize
and ->targetsize that results from XT_ALIGN().
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f98ebd47fd0da1717267ce1583a105d8cc29a16a ]
While noop_qdisc.gso_skb and noop_qdisc.skb_bad_txq are not used
in other places, it seems not correct to overwrite their fields
in dev_init_scheduler_queue().
noop_qdisc is essentially a shared and read-only object, even if
it is not marked as const because of some implementation detail.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 372809055f6c830ff978564e09f58bcb9e9b937c ]
Immediately after mlxsw module is probed and lldpad started, added APP
entries are briefly in "unknown" state before becoming "pending". That's
the state that lldpad_app_wait_set() typically sees, and since there are
no pending entries at that time, it bails out. However the entries have
not been pushed to the kernel yet at that point, and thus the test case
fails.
Fix by waiting for both unknown and pending entries to disappear before
proceeding.
Fixes: d159261f36 ("selftests: mlxsw: Add test for trust-DSCP")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f21c8e753b1dcb8f9e5b096db1f7f4e6fdfa7258 ]
Change initial PWM target to 255 to prevent overheating, for example
when BMC hangs in userspace or when userspace fan control application is
not implemented yet.
Signed-off-by: Kun Yi <kunyi@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 791ebc9d34e9d212fc03742c31654b017d385926 ]
The three INA3221_CONFIG_MODE macros are not correctly defined here.
The MODE3-1 bits are located at BIT 2-0 according to the datasheet.
So this patch just fixes them by shifting all of them with a correct
offset. However, this isn't a crital bug fix as the driver does not
use any of them at this point.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f67f7583e77fe5dc57aab3a6159c2642544eaad ]
Probe deferrals aren't actual errors, so silence the error message in
case the PWM cannot yet be acquired.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3be8c9d103534fadc72b3e174613f37aa19fa423 ]
For NCT6795D and NCT6796D, the DIMM temperature sources are named
"Agent[01] Dimm [01]" per datasheet. Match names in datasheets to
avoid confusion.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53dfa0088edd2e2793afa21488532b12eb2dae48 ]
BIOS developer guides refer to Family 15h Models 60h-6fh and Family 15h
Models 70h-7fh. So far the driver only checked for Models 60h and 70h.
However, there are now processors with other model numbers in the same
families. Example is A10-9620P family 15h model 65h. Follow the developer
guides and mask the lower 4 bit of the model number to determine the
registers to use for reading temperatures and temperature limits.
Reported-by: Guglielmo Fanini <g.fanini@gmail.com>
Cc: Guglielmo Fanini <g.fanini@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca2ade24157693b4e533ccec69df00ef719d4aad ]
There are extraneous parantheses that are causing clang to produce a
warning so remove these.
Clean up 3 clang warnings:
equality comparison with extraneous parentheses [-Wparentheses-equality]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a85c928f6a7856a09e47d9b37faa3407c7ac6a8e ]
The previous fix made the TVC clock get muxed in on the
D-Link DIR-685 instead of giving nagging warnings of this
not working. Not good. We didn't want that, as it breaks
video.
Create a specific group for the TVC CLK, and break out
a specific GPIO group for it on the SL3516 so we can use
that line as GPIO if we don't need the TVC CLK.
Fixes: d17f477c5bc6 ("pinctrl: gemini: Mask and set properly")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2978d873471005577e7b68a528b4f256a529b030 ]
Currently accessing various /sys/fs/orangefs files will spam the
kernel log with the following info message when the client is not
running:
[ 491.489284] sysfs_service_op_show: Client not running :-5:
Rate limit this info message to make it less spammy.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c200dac78fec66d87ef262cac38cfe4feabdf737 ]
PCI BIOS requires the BIOS area 0x0A0000-0x0FFFFFF to be mapped W+X for
various legacy reasons. When CONFIG_DEBUG_WX is enabled, this triggers the
WX warning, but this is misleading because the mapping is required and is
not a result of an accidental oversight.
Prevent the full warning when PCI BIOS is enabled and the detected WX
mapping is in the BIOS area. Just emit a pr_warn() which denotes the
fact. This is partially duplicating the info which the PCI BIOS code emits
when it maps the area as executable, but that info is not in the context of
the WX checking output.
Remove the extra %p printout in the WARN_ONCE() while at it. %pS is enough.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1810082151160.2455@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
