927 lines
40 KiB
Plaintext
927 lines
40 KiB
Plaintext
System Information
|
|
------------------
|
|
|
|
Raspberry Pi 3 Model B Rev 1.2
|
|
PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
|
|
NAME="Debian GNU/Linux"
|
|
VERSION_ID="11"
|
|
VERSION="11 (bullseye)"
|
|
|
|
Raspberry Pi reference 2023-02-21
|
|
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 25e2319effa91eb95edd9d9209eb9f8a584d67be, stage2
|
|
|
|
Linux raspi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux
|
|
Revision : a02082
|
|
Serial : 00000000af19d6b0
|
|
Model : Raspberry Pi 3 Model B Rev 1.2
|
|
Throttled flag : throttled=0x0
|
|
Camera : supported=0 detected=0, libcamera interfaces=0
|
|
|
|
Videocore information
|
|
---------------------
|
|
|
|
Mar 17 2023 10:52:42
|
|
Copyright (c) 2012 Broadcom
|
|
version 82f3750a65fadae9a38077e3c2e217ad158c8d54 (clean) (release) (start)
|
|
|
|
alloc failures: 0
|
|
compactions: 0
|
|
legacy block fails: 0
|
|
|
|
Filesystem information
|
|
----------------------
|
|
Filesystem 1K-blocks Used Available Use% Mounted on
|
|
/dev/root 59836584 3672020 53700428 7% /
|
|
devtmpfs 332564 0 332564 0% /dev
|
|
tmpfs 465716 0 465716 0% /dev/shm
|
|
tmpfs 186288 2676 183612 2% /run
|
|
tmpfs 5120 4 5116 1% /run/lock
|
|
/dev/mmcblk0p1 261108 31380 229728 13% /boot
|
|
tmpfs 93140 0 93140 0% /run/user/1000
|
|
|
|
Filename Type Size Used Priority
|
|
/var/swap file 102396 1536 -2
|
|
|
|
Package version information
|
|
---------------------------
|
|
raspberrypi-ui-mods:
|
|
Installed: (none)
|
|
raspberrypi-sys-mods:
|
|
Installed: 20230329
|
|
openbox:
|
|
Installed: (none)
|
|
lxpanel:
|
|
Installed: (none)
|
|
pcmanfm:
|
|
Installed: (none)
|
|
rpd-plym-splash:
|
|
Installed: (none)
|
|
|
|
Networking Information
|
|
----------------------
|
|
|
|
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
|
|
ether m.m.m.m txqueuelen 1000 (Ethernet)
|
|
RX packets 0 bytes 0 (0.0 B)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 0 bytes 0 (0.0 B)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
|
|
inet x.x.x.x netmask x.x.x.x
|
|
inet6 ::1 prefixlen 128 scopeid 0x10<host>
|
|
loop txqueuelen 1000 (Local Loopback)
|
|
RX packets 100289 bytes 10533189 (10.0 MiB)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 100289 bytes 10533189 (10.0 MiB)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
|
|
inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
|
|
inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
|
|
inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0<global>
|
|
ether m.m.m.m txqueuelen 1000 (Ethernet)
|
|
RX packets 45126 bytes 4914580 (4.6 MiB)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 46192 bytes 7946433 (7.5 MiB)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
|
|
USB Information
|
|
---------------
|
|
|
|
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|
|
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
|
|
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
|
|
|
|
Display Information
|
|
-------------------
|
|
|
|
Running (F)KMS, console
|
|
|
|
/sys/class/drm/card0-HDMI-A-1
|
|
|
|
/sys/class/drm/card0-Writeback-1
|
|
|
|
|
|
Connector 0 (32) HDMI-A-1 (disconnected)
|
|
Encoder 0 (31) TMDS
|
|
|
|
|
|
|
|
/sys/kernel/debug/dri/0/state:
|
|
plane[41]: plane-0
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=0
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[58]: plane-1
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=0
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[69]: plane-2
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=0
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[80]: plane-3
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=0
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[91]: plane-4
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=1
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[101]: plane-5
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=2
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[111]: plane-6
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=3
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[121]: plane-7
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=4
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[131]: plane-8
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=5
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[141]: plane-9
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=6
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[151]: plane-10
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=7
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[161]: plane-11
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=8
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[171]: plane-12
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=9
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[181]: plane-13
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=a
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[191]: plane-14
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=b
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[201]: plane-15
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=c
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[211]: plane-16
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=d
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[221]: plane-17
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=e
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[231]: plane-18
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=f
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[241]: plane-19
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=10
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[251]: plane-20
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=11
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[261]: plane-21
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=11
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[271]: plane-22
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=11
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
plane[281]: plane-23
|
|
crtc=(null)
|
|
fb=0
|
|
crtc-pos=0x0+0+0
|
|
src-pos=0.000000x0.000000+0.000000+0.000000
|
|
rotation=1
|
|
normalized-zpos=11
|
|
color-encoding=ITU-R BT.709 YCbCr
|
|
color-range=YCbCr limited range
|
|
crtc[51]: txp
|
|
enable=0
|
|
active=0
|
|
self_refresh_active=0
|
|
planes_changed=0
|
|
mode_changed=0
|
|
active_changed=0
|
|
connectors_changed=0
|
|
color_mgmt_changed=0
|
|
plane_mask=0
|
|
connector_mask=0
|
|
encoder_mask=0
|
|
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
|
|
crtc[68]: pixelvalve-0
|
|
enable=0
|
|
active=0
|
|
self_refresh_active=0
|
|
planes_changed=0
|
|
mode_changed=0
|
|
active_changed=0
|
|
connectors_changed=0
|
|
color_mgmt_changed=0
|
|
plane_mask=0
|
|
connector_mask=0
|
|
encoder_mask=0
|
|
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
|
|
crtc[79]: pixelvalve-1
|
|
enable=0
|
|
active=0
|
|
self_refresh_active=0
|
|
planes_changed=0
|
|
mode_changed=0
|
|
active_changed=0
|
|
connectors_changed=0
|
|
color_mgmt_changed=0
|
|
plane_mask=0
|
|
connector_mask=0
|
|
encoder_mask=0
|
|
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
|
|
crtc[90]: pixelvalve-2
|
|
enable=0
|
|
active=0
|
|
self_refresh_active=0
|
|
planes_changed=0
|
|
mode_changed=0
|
|
active_changed=0
|
|
connectors_changed=0
|
|
color_mgmt_changed=0
|
|
plane_mask=0
|
|
connector_mask=0
|
|
encoder_mask=0
|
|
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
|
|
connector[32]: HDMI-A-1
|
|
crtc=(null)
|
|
self_refresh_aware=0
|
|
max_requested_bpc=8
|
|
connector[57]: Writeback-1
|
|
crtc=(null)
|
|
self_refresh_aware=0
|
|
max_requested_bpc=0
|
|
|
|
|
|
|
|
config.txt
|
|
----------
|
|
|
|
aphy_params_current=819
|
|
arm_64bit=1
|
|
arm_freq=1200
|
|
arm_freq_min=600
|
|
audio_pwm_mode=514
|
|
camera_auto_detect=1
|
|
config_hdmi_boost=5
|
|
core_freq=400
|
|
desired_osc_freq=0x387520
|
|
disable_commandline_tags=2
|
|
disable_l2cache=1
|
|
disable_overscan=1
|
|
display_auto_detect=1
|
|
display_hdmi_rotate=-1
|
|
display_lcd_rotate=-1
|
|
dphy_params_current=547
|
|
dvfs=3
|
|
enable_tvout=1
|
|
enable_uart=1
|
|
force_eeprom_read=1
|
|
force_pwm_open=1
|
|
framebuffer_ignore_alpha=1
|
|
framebuffer_swap=1
|
|
gpu_freq=300
|
|
init_uart_clock=0x2dc6c00
|
|
lcd_framerate=60
|
|
mask_gpu_interrupt0=3072
|
|
mask_gpu_interrupt1=26370
|
|
max_framebuffers=2
|
|
over_voltage_avs=0x16e36
|
|
pause_burst_frames=1
|
|
program_serial_random=1
|
|
sdram_freq=450
|
|
total_mem=1024
|
|
hdmi_force_cec_address:0=65535
|
|
hdmi_force_cec_address:1=65535
|
|
hdmi_pixel_freq_limit:0=0x9a7ec80
|
|
device_tree=-
|
|
overlay_prefix=overlays/
|
|
hdmi_cvt:0=
|
|
hdmi_cvt:1=
|
|
hdmi_edid_filename:0=
|
|
hdmi_edid_filename:1=
|
|
hdmi_timings:0=
|
|
hdmi_timings:1=
|
|
|
|
cmdline.txt
|
|
-----------
|
|
coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b08bdaf8-02 rootfstype=ext4 fsck.repair=yes rootwait
|
|
|
|
raspi-gpio settings
|
|
-------------------
|
|
|
|
BANK0 (GPIO 0 to 27):
|
|
GPIO 0: level=1 fsel=0 func=INPUT
|
|
GPIO 1: level=1 fsel=0 func=INPUT
|
|
GPIO 2: level=1 fsel=4 alt=0 func=SDA1
|
|
GPIO 3: level=1 fsel=4 alt=0 func=SCL1
|
|
GPIO 4: level=1 fsel=0 func=INPUT
|
|
GPIO 5: level=1 fsel=0 func=INPUT
|
|
GPIO 6: level=1 fsel=0 func=INPUT
|
|
GPIO 7: level=1 fsel=1 func=OUTPUT
|
|
GPIO 8: level=1 fsel=1 func=OUTPUT
|
|
GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO
|
|
GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI
|
|
GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK
|
|
GPIO 12: level=0 fsel=0 func=INPUT
|
|
GPIO 13: level=0 fsel=0 func=INPUT
|
|
GPIO 14: level=1 fsel=2 alt=5 func=TXD1
|
|
GPIO 15: level=1 fsel=2 alt=5 func=RXD1
|
|
GPIO 16: level=0 fsel=0 func=INPUT
|
|
GPIO 17: level=0 fsel=0 func=INPUT
|
|
GPIO 18: level=0 fsel=0 func=INPUT
|
|
GPIO 19: level=0 fsel=0 func=INPUT
|
|
GPIO 20: level=0 fsel=0 func=INPUT
|
|
GPIO 21: level=0 fsel=0 func=INPUT
|
|
GPIO 22: level=0 fsel=0 func=INPUT
|
|
GPIO 23: level=0 fsel=0 func=INPUT
|
|
GPIO 24: level=0 fsel=0 func=INPUT
|
|
GPIO 25: level=0 fsel=0 func=INPUT
|
|
GPIO 26: level=1 fsel=1 func=OUTPUT
|
|
GPIO 27: level=0 fsel=0 func=INPUT
|
|
BANK1 (GPIO 28 to 45):
|
|
GPIO 28: level=0 fsel=0 func=INPUT
|
|
GPIO 29: level=1 fsel=0 func=INPUT
|
|
GPIO 30: level=0 fsel=0 func=INPUT
|
|
GPIO 31: level=0 fsel=0 func=INPUT
|
|
GPIO 32: level=1 fsel=7 alt=3 func=TXD0
|
|
GPIO 33: level=1 fsel=7 alt=3 func=RXD0
|
|
GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK
|
|
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD
|
|
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0
|
|
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1
|
|
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2
|
|
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3
|
|
GPIO 40: level=0 fsel=4 alt=0 func=PWM0
|
|
GPIO 41: level=0 fsel=4 alt=0 func=PWM1
|
|
GPIO 42: level=1 fsel=4 alt=0 func=GPCLK1
|
|
GPIO 43: level=0 fsel=4 alt=0 func=GPCLK2
|
|
GPIO 44: level=1 fsel=0 func=INPUT
|
|
GPIO 45: level=1 fsel=0 func=INPUT
|
|
BANK2 (GPIO 46 to 53):
|
|
GPIO 46: level=1 fsel=0 func=INPUT
|
|
GPIO 47: level=1 fsel=1 func=OUTPUT
|
|
GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK
|
|
GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD
|
|
GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0
|
|
GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1
|
|
GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2
|
|
GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3
|
|
|
|
vcdbg log messages
|
|
------------------
|
|
|
|
|
|
dmesg log
|
|
---------
|
|
|
|
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
|
|
[ 0.000000] Linux version 6.1.21-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023
|
|
[ 0.000000] random: crng init done
|
|
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
|
|
[ 0.000000] efi: UEFI not found.
|
|
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
|
|
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
|
|
[ 0.000000] Zone ranges:
|
|
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
|
|
[ 0.000000] DMA32 empty
|
|
[ 0.000000] Normal empty
|
|
[ 0.000000] Movable zone start for each node
|
|
[ 0.000000] Early memory node ranges
|
|
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
|
|
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
|
|
[ 0.000000] On node 0, zone DMA: 19456 pages in unavailable ranges
|
|
[ 0.000000] percpu: Embedded 29 pages/cpu s78504 r8192 d32088 u118784
|
|
[ 0.000000] pcpu-alloc: s78504 r8192 d32088 u118784 alloc=29*4096
|
|
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
|
|
[ 0.000000] Detected VIPT I-cache on CPU0
|
|
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
|
|
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
|
|
[ 0.000000] CPU features: detected: ARM erratum 843419
|
|
[ 0.000000] CPU features: detected: ARM erratum 845719
|
|
[ 0.000000] alternatives: applying boot alternatives
|
|
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
|
|
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b08bdaf8-02 rootfstype=ext4 fsck.repair=yes rootwait
|
|
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
|
|
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
|
|
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
|
|
[ 0.000000] Memory: 665128K/970752K available (11776K kernel code, 2106K rwdata, 3688K rodata, 4160K init, 1077K bss, 43480K reserved, 262144K cma-reserved)
|
|
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
|
|
[ 0.000000] ftrace: allocating 39744 entries in 156 pages
|
|
[ 0.000000] ftrace: allocated 156 pages with 4 groups
|
|
[ 0.000000] trace event string verifier disabled
|
|
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
|
|
[ 0.000000] rcu: RCU event tracing is enabled.
|
|
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
|
|
[ 0.000000] Trampoline variant of Tasks RCU enabled.
|
|
[ 0.000000] Rude variant of Tasks RCU enabled.
|
|
[ 0.000000] Tracing variant of Tasks RCU enabled.
|
|
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
|
|
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
|
|
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
|
|
[ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
|
|
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
|
|
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
|
|
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
|
|
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
|
|
[ 0.000379] Console: colour dummy device 80x25
|
|
[ 0.001374] printk: console [tty1] enabled
|
|
[ 0.001466] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
|
|
[ 0.001533] pid_max: default: 32768 minimum: 301
|
|
[ 0.001733] LSM: Security Framework initializing
|
|
[ 0.002009] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
|
|
[ 0.002080] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
|
|
[ 0.003993] cgroup: Disabling memory control group subsystem
|
|
[ 0.007207] cblist_init_generic: Setting adjustable number of callback queues.
|
|
[ 0.007258] cblist_init_generic: Setting shift to 2 and lim to 1.
|
|
[ 0.007552] cblist_init_generic: Setting shift to 2 and lim to 1.
|
|
[ 0.007838] cblist_init_generic: Setting shift to 2 and lim to 1.
|
|
[ 0.008571] rcu: Hierarchical SRCU implementation.
|
|
[ 0.008610] rcu: Max phase no-delay instances is 1000.
|
|
[ 0.010396] EFI services will not be available.
|
|
[ 0.011163] smp: Bringing up secondary CPUs ...
|
|
[ 0.012873] Detected VIPT I-cache on CPU1
|
|
[ 0.013050] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
|
|
[ 0.014797] Detected VIPT I-cache on CPU2
|
|
[ 0.014939] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
|
|
[ 0.016711] Detected VIPT I-cache on CPU3
|
|
[ 0.016855] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
|
|
[ 0.017088] smp: Brought up 1 node, 4 CPUs
|
|
[ 0.017251] SMP: Total of 4 processors activated.
|
|
[ 0.017287] CPU features: detected: 32-bit EL0 Support
|
|
[ 0.017321] CPU features: detected: 32-bit EL1 Support
|
|
[ 0.017358] CPU features: detected: CRC32 instructions
|
|
[ 0.017552] CPU: All CPU(s) started at EL2
|
|
[ 0.017603] alternatives: applying system-wide alternatives
|
|
[ 0.020178] devtmpfs: initialized
|
|
[ 0.045054] Enabled cp15_barrier support
|
|
[ 0.045139] Enabled setend support
|
|
[ 0.045496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
|
|
[ 0.045573] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
|
|
[ 0.057234] pinctrl core: initialized pinctrl subsystem
|
|
[ 0.058594] DMI not present or invalid.
|
|
[ 0.059637] NET: Registered PF_NETLINK/PF_ROUTE protocol family
|
|
[ 0.071738] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
|
|
[ 0.072203] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
|
|
[ 0.073785] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
|
|
[ 0.073976] audit: initializing netlink subsys (disabled)
|
|
[ 0.074436] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
|
|
[ 0.075479] thermal_sys: Registered thermal governor 'step_wise'
|
|
[ 0.075613] cpuidle: using governor menu
|
|
[ 0.076343] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
|
|
[ 0.076707] ASID allocator initialised with 32768 entries
|
|
[ 0.076994] Serial: AMBA PL011 UART driver
|
|
[ 0.094621] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
|
|
[ 0.120658] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start
|
|
[ 0.124677] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54
|
|
[ 0.137847] KASLR enabled
|
|
[ 0.193254] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
|
|
[ 0.200304] SCSI subsystem initialized
|
|
[ 0.200708] usbcore: registered new interface driver usbfs
|
|
[ 0.200825] usbcore: registered new interface driver hub
|
|
[ 0.200952] usbcore: registered new device driver usb
|
|
[ 0.201630] usb_phy_generic phy: supply vcc not found, using dummy regulator
|
|
[ 0.202005] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
|
|
[ 0.202473] pps_core: LinuxPPS API ver. 1 registered
|
|
[ 0.202511] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
|
[ 0.202598] PTP clock support registered
|
|
[ 0.204384] vgaarb: loaded
|
|
[ 0.205634] clocksource: Switched to clocksource arch_sys_counter
|
|
[ 0.206444] VFS: Disk quotas dquot_6.6.0
|
|
[ 0.206585] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
|
|
[ 0.206912] FS-Cache: Loaded
|
|
[ 0.207211] CacheFiles: Loaded
|
|
[ 0.223978] NET: Registered PF_INET protocol family
|
|
[ 0.224433] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
|
|
[ 0.226865] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
|
|
[ 0.227087] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
|
|
[ 0.227153] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
|
|
[ 0.227310] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
|
|
[ 0.227705] TCP: Hash tables configured (established 8192 bind 8192)
|
|
[ 0.227967] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
|
|
[ 0.228058] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
|
|
[ 0.228430] NET: Registered PF_UNIX/PF_LOCAL protocol family
|
|
[ 0.229467] RPC: Registered named UNIX socket transport module.
|
|
[ 0.229513] RPC: Registered udp transport module.
|
|
[ 0.229548] RPC: Registered tcp transport module.
|
|
[ 0.229582] RPC: Registered tcp NFSv4.1 backchannel transport module.
|
|
[ 0.229686] PCI: CLS 0 bytes, default 64
|
|
[ 0.232461] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
|
|
[ 0.232898] kvm [1]: IPA Size Limit: 40 bits
|
|
[ 0.234760] kvm [1]: Hyp mode initialized successfully
|
|
[ 2.015102] Initialise system trusted keyrings
|
|
[ 2.015786] workingset: timestamp_bits=46 max_order=18 bucket_order=0
|
|
[ 2.029092] zbud: loaded
|
|
[ 2.033882] NFS: Registering the id_resolver key type
|
|
[ 2.033978] Key type id_resolver registered
|
|
[ 2.034015] Key type id_legacy registered
|
|
[ 2.034216] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
|
|
[ 2.034264] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
|
|
[ 2.036438] Key type asymmetric registered
|
|
[ 2.036485] Asymmetric key parser 'x509' registered
|
|
[ 2.036631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
|
|
[ 2.037056] io scheduler mq-deadline registered
|
|
[ 2.037102] io scheduler kyber registered
|
|
[ 2.048574] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes
|
|
[ 2.048653] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
|
|
[ 2.052483] Console: switching to colour frame buffer device 90x30
|
|
[ 2.057412] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered!
|
|
[ 2.067271] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
|
|
[ 2.073233] bcm2835-rng 3f104000.rng: hwrng registered
|
|
[ 2.076329] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
|
|
[ 2.082507] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
|
|
[ 2.105074] brd: module loaded
|
|
[ 2.121358] loop: module loaded
|
|
[ 2.124522] Loading iSCSI transport class v2.0-870.
|
|
[ 2.134045] usbcore: registered new interface driver r8152
|
|
[ 2.136152] usbcore: registered new interface driver lan78xx
|
|
[ 2.138203] usbcore: registered new interface driver smsc95xx
|
|
[ 2.140834] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
|
|
[ 2.871297] Core Release: 2.80a
|
|
[ 2.873119] Setting default values for core params
|
|
[ 2.874997] Finished setting default values for core params
|
|
[ 3.077311] Using Buffer DMA mode
|
|
[ 3.079100] Periodic Transfer Interrupt Enhancement - disabled
|
|
[ 3.080905] Multiprocessor Interrupt Enhancement - disabled
|
|
[ 3.082752] OTG VER PARAM: 0, OTG VER FLAG: 0
|
|
[ 3.084557] Dedicated Tx FIFOs mode
|
|
|
|
[ 3.091477] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = ffffffc008459000 dma = 0x00000000df000000 len=9024
|
|
[ 3.096585] FIQ FSM acceleration enabled for :
|
|
Non-periodic Split Transactions
|
|
Periodic Split Transactions
|
|
High-Speed Isochronous Endpoints
|
|
Interrupt/Control Split Transaction hack enabled
|
|
[ 3.104537] dwc_otg: Microframe scheduler enabled
|
|
|
|
[ 3.104615] WARN::hcd_init_fiq:497: MPHI regs_base at ffffffc00806d000
|
|
[ 3.107656] dwc_otg 3f980000.usb: DWC OTG Controller
|
|
[ 3.109208] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
|
|
[ 3.110844] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
|
|
[ 3.112434] Init: Port Power? op_state=1
|
|
[ 3.114013] Init: Power Port (0)
|
|
[ 3.116140] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
|
|
[ 3.119390] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 3.121127] usb usb1: Product: DWC OTG Controller
|
|
[ 3.122857] usb usb1: Manufacturer: Linux 6.1.21-v8+ dwc_otg_hcd
|
|
[ 3.124570] usb usb1: SerialNumber: 3f980000.usb
|
|
[ 3.127426] hub 1-0:1.0: USB hub found
|
|
[ 3.129164] hub 1-0:1.0: 1 port detected
|
|
[ 3.132172] dwc_otg: FIQ enabled
|
|
[ 3.132192] dwc_otg: NAK holdoff enabled
|
|
[ 3.132208] dwc_otg: FIQ split-transaction FSM enabled
|
|
[ 3.132236] Module dwc_common_port init
|
|
[ 3.133073] usbcore: registered new interface driver uas
|
|
[ 3.134936] usbcore: registered new interface driver usb-storage
|
|
[ 3.136945] mousedev: PS/2 mouse device common for all mice
|
|
[ 3.146042] sdhci: Secure Digital Host Controller Interface driver
|
|
[ 3.147660] sdhci: Copyright(c) Pierre Ossman
|
|
[ 3.150208] sdhci-pltfm: SDHCI platform and OF driver helper
|
|
[ 3.155834] ledtrig-cpu: registered to indicate activity on CPUs
|
|
[ 3.158090] hid: raw HID events driver (C) Jiri Kosina
|
|
[ 3.160068] usbcore: registered new interface driver usbhid
|
|
[ 3.161764] usbhid: USB HID core driver
|
|
[ 3.171864] NET: Registered PF_PACKET protocol family
|
|
[ 3.173771] Key type dns_resolver registered
|
|
[ 3.177768] registered taskstats version 1
|
|
[ 3.179473] Loading compiled-in X.509 certificates
|
|
[ 3.182364] Key type .fscrypt registered
|
|
[ 3.183941] Key type fscrypt-provisioning registered
|
|
[ 3.212576] uart-pl011 3f201000.serial: cts_event_workaround enabled
|
|
[ 3.214466] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
|
|
[ 3.222635] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default
|
|
[ 3.225382] printk: console [ttyS0] disabled
|
|
[ 3.227239] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 71, base_baud = 50000000) is a 16550
|
|
[ 3.241892] Indeed it is in host mode hprt0 = 00021501
|
|
[ 3.255246] printk: console [ttyS0] enabled
|
|
[ 3.457685] usb 1-1: new high-speed USB device number 2 using dwc_otg
|
|
[ 3.460378] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
|
|
[ 3.466836] Indeed it is in host mode hprt0 = 00001101
|
|
[ 3.472226] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
|
|
[ 3.686567] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
|
|
[ 3.696641] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
|
|
[ 3.696980] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
|
[ 3.698942] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
|
|
[ 3.703239] hub 1-1:1.0: USB hub found
|
|
[ 3.734550] sdhost: log_buf @ 00000000d6f416cf (c2ac5000)
|
|
[ 3.741664] hub 1-1:1.0: 5 ports detected
|
|
[ 3.802683] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
|
|
[ 4.113689] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
|
|
[ 4.124961] of_cfs_init
|
|
[ 4.249913] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
|
|
[ 4.253747] of_cfs_init: OK
|
|
[ 4.257111] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
|
[ 4.295010] mmc0: host does not support reading read-only switch, assuming write-enable
|
|
[ 4.332941] smsc95xx v2.0.0
|
|
[ 4.336236] mmc0: Problem switching card into high-speed mode!
|
|
[ 4.575685] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=184)
|
|
[ 4.586162] mmc0: new SDXC card at address 0001
|
|
[ 4.601667] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, m.m.m.m
|
|
[ 4.610883] mmcblk0: mmc0:0001 SD 58.2 GiB
|
|
[ 4.707379] mmcblk0: p1 p2
|
|
[ 4.713325] mmcblk0: mmc0:0001 SD 58.2 GiB
|
|
[ 4.740278] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
|
|
[ 4.749898] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
|
|
[ 4.849367] mmc1: new high speed SDIO card at address 0001
|
|
[ 5.857778] EXT4-fs (mmcblk0p2): recovery complete
|
|
[ 5.873256] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
|
|
[ 5.886030] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
|
|
[ 5.910453] devtmpfs: mounted
|
|
[ 5.927322] Freeing unused kernel memory: 4160K
|
|
[ 5.934216] Run /sbin/init as init process
|
|
[ 5.940384] with arguments:
|
|
[ 5.940401] /sbin/init
|
|
[ 5.940418] with environment:
|
|
[ 5.940434] HOME=/
|
|
[ 5.940450] TERM=linux
|
|
[ 7.037127] systemd[1]: System time before build time, advancing clock.
|
|
[ 7.371237] NET: Registered PF_INET6 protocol family
|
|
[ 7.381223] Segment Routing with IPv6
|
|
[ 7.387060] In-situ OAM (IOAM) with IPv6
|
|
[ 7.529197] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
|
|
[ 7.560107] systemd[1]: Detected architecture arm64.
|
|
[ 7.600314] systemd[1]: Set hostname to <raspi>.
|
|
[ 8.859094] systemd[1]: Queued start job for default target Multi-User System.
|
|
[ 8.888251] systemd[1]: Created slice system-getty.slice.
|
|
[ 8.900837] systemd[1]: Created slice system-modprobe.slice.
|
|
[ 8.912996] systemd[1]: Created slice system-serial\x2dgetty.slice.
|
|
[ 8.926096] systemd[1]: Created slice system-systemd\x2dfsck.slice.
|
|
[ 8.938542] systemd[1]: Created slice User and Session Slice.
|
|
[ 8.949779] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
|
|
[ 8.963219] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
|
|
[ 8.977379] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
|
|
[ 8.994428] systemd[1]: Reached target Local Encrypted Volumes.
|
|
[ 9.005518] systemd[1]: Reached target Paths.
|
|
[ 9.014918] systemd[1]: Reached target Slices.
|
|
[ 9.024327] systemd[1]: Reached target Swap.
|
|
[ 9.039456] systemd[1]: Listening on Syslog Socket.
|
|
[ 9.050630] systemd[1]: Listening on fsck to fsckd communication Socket.
|
|
[ 9.062884] systemd[1]: Listening on initctl Compatibility Named Pipe.
|
|
[ 9.076326] systemd[1]: Listening on Journal Audit Socket.
|
|
[ 9.088078] systemd[1]: Listening on Journal Socket (/dev/log).
|
|
[ 9.100550] systemd[1]: Listening on Journal Socket.
|
|
[ 9.113390] systemd[1]: Listening on udev Control Socket.
|
|
[ 9.124898] systemd[1]: Listening on udev Kernel Socket.
|
|
[ 9.136377] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
|
|
[ 9.170386] systemd[1]: Mounting POSIX Message Queue File System...
|
|
[ 9.188446] systemd[1]: Mounting RPC Pipe File System...
|
|
[ 9.206458] systemd[1]: Mounting Kernel Debug File System...
|
|
[ 9.224502] systemd[1]: Mounting Kernel Trace File System...
|
|
[ 9.236006] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
|
|
[ 9.262957] systemd[1]: Starting Restore / save the current clock...
|
|
[ 9.282327] systemd[1]: Starting Set the console keyboard layout...
|
|
[ 9.302071] systemd[1]: Starting Create list of static device nodes for the current kernel...
|
|
[ 9.326151] systemd[1]: Starting Load Kernel Module configfs...
|
|
[ 9.345924] systemd[1]: Starting Load Kernel Module drm...
|
|
[ 9.364601] systemd[1]: Starting Load Kernel Module fuse...
|
|
[ 9.387342] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
|
|
[ 9.430493] systemd[1]: Starting File System Check on Root Device...
|
|
[ 9.465600] systemd[1]: Starting Journal Service...
|
|
[ 9.468321] fuse: init (API version 7.37)
|
|
[ 9.506463] systemd[1]: Starting Load Kernel Modules...
|
|
[ 9.538768] systemd[1]: Starting Coldplug All udev Devices...
|
|
[ 9.587197] systemd[1]: Mounted POSIX Message Queue File System.
|
|
[ 9.603372] systemd[1]: Mounted RPC Pipe File System.
|
|
[ 9.615550] systemd[1]: Mounted Kernel Debug File System.
|
|
[ 9.626640] systemd[1]: Mounted Kernel Trace File System.
|
|
[ 9.644322] systemd[1]: Finished Restore / save the current clock.
|
|
[ 9.659875] systemd[1]: Finished Create list of static device nodes for the current kernel.
|
|
[ 9.679480] systemd[1]: modprobe@configfs.service: Succeeded.
|
|
[ 9.690357] systemd[1]: Finished Load Kernel Module configfs.
|
|
[ 9.704410] systemd[1]: modprobe@drm.service: Succeeded.
|
|
[ 9.719453] systemd[1]: Finished Load Kernel Module drm.
|
|
[ 9.733337] systemd[1]: modprobe@fuse.service: Succeeded.
|
|
[ 9.743582] systemd[1]: Finished Load Kernel Module fuse.
|
|
[ 9.786421] i2c_dev: i2c /dev entries driver
|
|
[ 9.795403] systemd[1]: Mounting FUSE Control File System...
|
|
[ 9.814027] systemd[1]: Mounting Kernel Configuration File System...
|
|
[ 9.832847] systemd[1]: Started File System Check Daemon to report status.
|
|
[ 9.857933] systemd[1]: Finished Load Kernel Modules.
|
|
[ 9.869218] systemd[1]: Mounted FUSE Control File System.
|
|
[ 9.881209] systemd[1]: Mounted Kernel Configuration File System.
|
|
[ 9.927349] systemd[1]: Starting Apply Kernel Variables...
|
|
[ 10.006642] systemd[1]: Finished Apply Kernel Variables.
|
|
[ 10.077154] systemd[1]: Finished File System Check on Root Device.
|
|
[ 10.109829] systemd[1]: Starting Remount Root and Kernel File Systems...
|
|
[ 10.127629] systemd[1]: Started Journal Service.
|
|
[ 10.370975] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
|
|
[ 10.485303] systemd-journald[144]: Received client request to flush runtime journal.
|
|
[ 12.987451] mc: Linux media interface: v0.10
|
|
[ 13.023011] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
|
|
[ 13.037090] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
|
|
[ 13.037162] [vc_sm_connected_init]: start
|
|
[ 13.046309] [vc_sm_connected_init]: installed successfully
|
|
[ 13.094371] videodev: Linux video capture interface: v2.00
|
|
[ 13.202981] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
|
|
[ 13.207412] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
|
|
[ 13.228756] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
|
|
[ 13.229310] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
|
|
[ 13.238539] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
|
|
[ 13.243344] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
|
|
[ 13.245394] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
|
|
[ 13.246662] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
|
|
[ 13.247553] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
|
|
[ 13.247609] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
|
|
[ 13.247645] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
|
|
[ 13.247676] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
|
|
[ 13.247707] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
|
|
[ 13.252237] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
|
|
[ 13.253181] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
|
|
[ 13.254221] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
|
|
[ 13.255114] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
|
|
[ 13.255186] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
|
|
[ 13.255223] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
|
|
[ 13.255285] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
|
|
[ 13.255317] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
|
|
[ 13.255938] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
|
|
[ 13.282741] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
|
|
[ 13.302886] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
|
|
[ 13.302990] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
|
|
[ 13.314557] bcm2835_audio bcm2835_audio: card created with 8 channels
|
|
[ 13.317669] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
|
|
[ 13.317763] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
|
|
[ 13.333474] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
|
|
[ 13.333552] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
|
|
[ 13.340340] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
|
|
[ 13.340444] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
|
|
[ 13.348830] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
|
|
[ 13.348930] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
|
|
[ 14.115542] cfg80211: Loading compiled-in X.509 certificates for regulatory database
|
|
[ 14.185520] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
|
|
[ 14.214993] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
|
|
[ 14.646614] Console: switching to colour dummy device 80x25
|
|
[ 14.656236] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
|
|
[ 14.670766] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
|
|
[ 14.671807] usbcore: registered new interface driver brcmfmac
|
|
[ 14.677599] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
|
|
[ 14.696660] Registered IR keymap rc-cec
|
|
[ 14.696988] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
|
|
[ 14.697410] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0
|
|
[ 14.728586] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
|
|
[ 14.729344] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
|
|
[ 14.742100] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
|
|
[ 14.742731] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
|
|
[ 14.743296] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
|
|
[ 14.743745] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
|
|
[ 14.784865] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
|
|
[ 14.793145] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
|
|
[ 15.077916] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897
|
|
[ 16.203617] uart-pl011 3f201000.serial: no DMA platform data
|
|
[ 16.576466] 8021q: 802.1Q VLAN Support v1.8
|
|
[ 16.657070] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
|
|
[ 17.311521] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
|
|
[ 17.773247] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
|
|
[ 17.779194] smsc95xx 1-1.1:1.0 eth0: Link is Down
|
|
[ 18.741371] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
|
|
[ 20.174689] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
|
|
[ 22.012535] Bluetooth: Core ver 2.22
|
|
[ 22.012679] NET: Registered PF_BLUETOOTH protocol family
|
|
[ 22.012690] Bluetooth: HCI device and connection manager initialized
|
|
[ 22.012721] Bluetooth: HCI socket layer initialized
|
|
[ 22.012738] Bluetooth: L2CAP socket layer initialized
|
|
[ 22.012767] Bluetooth: SCO socket layer initialized
|
|
[ 22.027643] Bluetooth: HCI UART driver ver 2.3
|
|
[ 22.027677] Bluetooth: HCI UART protocol H4 registered
|
|
[ 22.027806] Bluetooth: HCI UART protocol Three-wire (H5) registered
|
|
[ 22.028123] Bluetooth: HCI UART protocol Broadcom registered
|
|
[ 23.003696] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
|
|
[ 23.003736] Bluetooth: BNEP filters: protocol multicast
|
|
[ 23.003775] Bluetooth: BNEP socket layer initialized
|
|
[ 23.016222] Bluetooth: MGMT ver 1.22
|
|
[ 23.038455] NET: Registered PF_ALG protocol family
|